/* LCD Demo with an LCD having two E lines (E1 and E2): that makes 2x2 lines */
static void LCD_Demo1(void) {
uint8_t cnt;
uint8_t buf[5];
LCD1_UseDisplay(1); /* switch to upper/first display */
LCD1_Clear();
LCD1_WriteLineStr(1, "LCD Line 1");
LCD1_WriteLineStr(2, "LCD Line 2");
LCD1_UseDisplay(2); /* switch to second display */
LCD1_Clear();
LCD1_WriteLineStr(1, "Hello LCD 3");
LCD1_WriteLineStr(2, "Hello LCD 4");
cnt = 0;
for(;;) {
UTIL1_Num16uToStr(buf, sizeof(buf), cnt);
LCD1_UseDisplay(1); /* switch to first display */
LCD1_GotoXY(2,1);
LCD1_WriteString((char*)buf);
LCD1_UseDisplay(2); /* switch to second display */
LCD1_GotoXY(2,1);
LCD1_WriteString((char*)buf);
cnt++;
WAIT1_Waitms(100);
}
}
/*lint -save -e970 Disable MISRA rule (6.3) checking. */
int main(void)
/*lint -restore Enable MISRA rule (6.3) checking. */
{
/* Write your local variable definition here */
/*** Processor Expert internal initialization. DON'T REMOVE THIS CODE!!! ***/
PE_low_level_init();
/*** End of Processor Expert internal initialization. ***/
//printf("HOLA MUNDO");
/* Write your code here */
/* For example: for(;;) { } */
byte MPU_PWR=0x6B;
int16_t AcX,AcY,AcZ,GcX,GcY,GcZ,temp;
char buffer[15];
uint8_t aux[15];
//Inicializando la comunicacion I2C
GI2C1_Init();
GI2C1_SelectSlave(MPU);
GI2C1_WriteByteAddress8(MPU,MPU_PWR,0);
//Inicializando la comunicacion LCD
LCD1_UseDisplay(1);
LCD1_Clear();
for(;;) {
//Lectura de los Valores del Acelerometro
GI2C1_ReadByteAddress8(MPU,0x3B,&buffer[1]);
mywait_Waitms(2);
GI2C1_ReadByteAddress8(MPU,0x3C,&buffer[2]);
mywait_Waitms(2);
AcX=buffer[1];
AcX=AcX<<8;
AcX=AcX | buffer[2];
GI2C1_ReadByteAddress8(MPU,0x3D,&buffer[3]);
mywait_Waitms(2);
GI2C1_ReadByteAddress8(MPU,0x3E,&buffer[4]);
mywait_Waitms(2);
AcY=buffer[3];
AcY=AcY<<8;
AcY=AcY | buffer[4];
GI2C1_ReadByteAddress8(MPU,0x3F,&buffer[5]);
mywait_Waitms(2);
GI2C1_ReadByteAddress8(MPU,0x40,&buffer[6]);
mywait_Waitms(2);
AcZ=buffer[5];
AcZ=AcZ<<8;
AcZ=AcZ | buffer[6];
printf("Acelerometro\nX=%d\tY=%d\tZ=%d\n", AcX,AcY,AcZ);
LCD1_WriteLineStr(1,"Acelerometro: ");
UTIL1_Num16sToStr(aux, sizeof(aux), AcX);
LCD1_WriteLineStr(2," ");
LCD1_GotoXY(2,1);
LCD1_WriteString("X=");
LCD1_GotoXY(2,4);
LCD1_WriteString((char*)aux);
mywait_Waitms(2000);
UTIL1_Num16sToStr(aux, sizeof(aux), AcY);
LCD1_WriteLineStr(2," ");
LCD1_GotoXY(2,1);
LCD1_WriteString("Y=");
LCD1_GotoXY(2,4);
LCD1_WriteString((char*)aux);
mywait_Waitms(2000);
UTIL1_Num16sToStr(aux, sizeof(aux), AcZ);
LCD1_WriteLineStr(2," ");
LCD1_GotoXY(2,1);
LCD1_WriteString("Z=");
LCD1_GotoXY(2,4);
LCD1_WriteString((char*)aux);
mywait_Waitms(2000);
//Capturando los valores del Giroscopio
GI2C1_ReadByteAddress8(MPU,0x43,&buffer[7]);
mywait_Waitms(10);
GI2C1_ReadByteAddress8(MPU,0x44,&buffer[8]);
mywait_Waitms(10);
GcX=buffer[7];
GcX=GcX<<8;
GcX=GcX | buffer[8];
GI2C1_ReadByteAddress8(MPU,0x45,&buffer[9]);
mywait_Waitms(10);
GI2C1_ReadByteAddress8(MPU,0x46,&buffer[10]);
mywait_Waitms(10);
GcY=buffer[9];
GcY=GcY<<8;
GcY=GcY | buffer[10];
GI2C1_ReadByteAddress8(MPU,0x47,&buffer[11]);
mywait_Waitms(10);
GI2C1_ReadByteAddress8(MPU,0x48,&buffer[12]);
mywait_Waitms(10);
GcZ=buffer[11];
GcZ=GcZ<<8;
GcZ=GcZ | buffer[12];
printf("Giroscopio\nGX=%d\tGY=%d\tGZ=%d\n", GcX,GcY,GcZ);
LCD1_WriteLineStr(1,"Giroscopio: ");
UTIL1_Num16sToStr(aux, sizeof(aux), GcX);
LCD1_WriteLineStr(2," ");
LCD1_GotoXY(2,1);
LCD1_WriteString("Gx=");
LCD1_GotoXY(2,5);
LCD1_WriteString((char*)aux);
mywait_Waitms(2000);
UTIL1_Num16sToStr(aux, sizeof(aux), GcY);
LCD1_WriteLineStr(2," ");
LCD1_GotoXY(2,1);
LCD1_WriteString("Gy=");
LCD1_GotoXY(2,5);
LCD1_WriteString((char*)aux);
mywait_Waitms(2000);
UTIL1_Num16sToStr(aux, sizeof(aux), GcZ);
LCD1_WriteLineStr(2," ");
LCD1_GotoXY(2,1);
LCD1_WriteString("Gz=");
LCD1_GotoXY(2,5);
LCD1_WriteString((char*)aux);
mywait_Waitms(2000);
//Capturando los valores de temperatura
GI2C1_ReadByteAddress8(MPU,0x41,&buffer[13]);
mywait_Waitms(10);
GI2C1_ReadByteAddress8(MPU,0x42,&buffer[14]);
mywait_Waitms(10);
temp=buffer[13];
temp=temp<<8;
temp=temp | buffer[14];
temp=(temp/340)+37;
printf("Temperatura = %d\n", temp);
LCD1_WriteLineStr(1,"Temperatura: ");
UTIL1_Num16sToStr(aux, sizeof(aux), temp);
LCD1_WriteLineStr(2," ");
LCD1_GotoXY(2,5);
LCD1_WriteString((char*)aux);
mywait_Waitms(2000);
//Recibiendo los datos de GPS del Bluetooth
myserial_RecvBlock(btbuffer,sizeof(btbuffer),&rx);
strcpy(auxbuffer, btbuffer);
char *token;
token = strtok(auxbuffer, ",");
int i = 0;
while(token != NULL)
{
if(i==0)
{
if(token==99)
{
token = NULL;
}
}
if(i == 2){
printf( "Latitud: %s\n", token );
LCD1_WriteLineStr(1,"Latitud: ");
LCD1_WriteLineStr(2," ");
LCD1_WriteLineStr(2,token);
mywait_Waitms(2000);
}
if(i == 3){
printf( "Longitud: %s\n", token );
LCD1_WriteLineStr(1,"Longitud: ");
LCD1_WriteLineStr(2," ");
LCD1_WriteLineStr(2,token);
mywait_Waitms(2000);
}
if(i == 4){
token=strtok(token,">");
printf( "Altura: %s\n", token );
LCD1_WriteLineStr(1,"Altura: ");
LCD1_WriteLineStr(2," ");
LCD1_WriteLineStr(2,token);
mywait_Waitms(2000);
}
token = strtok(NULL, ",");
i++;
}
WAIT1_Waitms(1000);
}
/*** Don't write any code pass this line, or it will be deleted during code generation. ***/
/*** RTOS startup code. Macro PEX_RTOS_START is defined by the RTOS component. DON'T MODIFY THIS CODE!!! ***/
#ifdef PEX_RTOS_START
PEX_RTOS_START(); /* Startup of the selected RTOS. Macro is defined by the RTOS component. */
#endif
/*** End of RTOS startup code. ***/
/*** Processor Expert end of main routine. DON'T MODIFY THIS CODE!!! ***/
for(;;){}
/*** Processor Expert end of main routine. DON'T WRITE CODE BELOW!!! ***/
} /*** End of main routine. DO NOT MODIFY THIS TEXT!!! ***/
