/*
* \brief Draw a line on LCD, horizontal and vertical line are supported.
*
* \param x X-coordinate of line start.
* \param y Y-coordinate of line start.
* \param length line length.
* \param direction line direction: 0 - horizontal, 1 - vertical.
* \param color Pixel color.
*/
void LCDD_DrawLine(
uint32_t x,
uint32_t y,
uint32_t length,
uint32_t direction,
uint32_t color)
{
uint32_t i = 0;
LCD_SetCursor(x, y);
if(direction == DIRECTION_HLINE) {
LCD_WriteRAM_Prepare();
for(i = 0; i < length; i++) {
LCD_WriteRAM(color);
}
}
else {
for(i = 0; i < length; i++) {
LCD_WriteRAM_Prepare();
LCD_WriteRAM(color);
y++;
LCD_SetCursor(x, y);
}
}
}
/*******************************************************************************
* ?????? *
*******************************************************************************/
void main()
{
OSCCON = 0b01110010 ; // ???????8??????
OPTION_REG = 0b00000000 ; // ????I/O???????????????
ANSELA = 0b00000000 ; // ??????????????????I/O??????
TRISA = 0b00000110 ; // ???RA1(SCL)/RA2(SDA)????(RA3?????)
WPUA = 0b00000000 ; // RA1/RA2???????????????
PORTA = 0b00000000 ; // ????????(??LOW???)
RA4 = 0;
__delay_ms(500);
RA4 = 1;
__delay_ms(500);
int i = 0;
// ?????????(????100KHz)
InitI2C_Master(1) ;
// ??????????????
// ICON OFF,??????(0-63),VDD=3.3V???,LCD?8???
LCD_Init(LCD_NOT_ICON,32,LCD_VDD3V,8) ;
while(1)
{
if(RA4 == 0)
i++;
LCD_SetCursor(0,0) ; // ?????????
LCD_Puts("-JP7FKF-") ;
LCD_SetCursor(0,1) ; // ?????????
LCD_Putc(i+0x30) ;
}
}
/*******************************************************************************
* Function Name : LCD_DrawChar
* Description : Draws a character on LCD.
* Input : - Xpos: the Line where to display the character shape.
* This parameter can be one of the following values:
* - Linex: where x can be 0..9
* - Ypos: start column address.
* - c: pointer to the character data.
* Output : None
* Return : None
*******************************************************************************/
void LCD_DrawChar(u8 Xpos, u16 Ypos, uc16 *c)
{
u32 index = 0, i = 0;
u8 Xaddress = 0;
Xaddress = Xpos;
LCD_SetCursor(Xaddress, Ypos);
for(index = 0; index < 24; index++)
{
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
for(i = 0; i < 16; i++)
{
if((c[index] & (1 << i)) == 0x00)
{
LCD_WriteRAM(BackColor);
}
else
{
LCD_WriteRAM(TextColor);
}
}
Xaddress++;
LCD_SetCursor(Xaddress, Ypos);
}
}
/*******************************************************************************
* Function Name : LCD_DrawLine
* Description : Displays a line.
* Input : - Xpos: specifies the X position.
* - Ypos: specifies the Y position.
* - Length: line length.
* - Direction: line direction.
* This parameter can be one of the following values: Vertical
* or Horizontal.
* Output : None
* Return : None
*******************************************************************************/
void LCD_DrawLine(u8 Xpos, u16 Ypos, u16 Length, u8 Direction)
{
u32 i = 0;
LCD_SetCursor(Xpos, Ypos);
if(Direction == Horizontal)
{
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
for(i = 0; i < Length; i++)
{
LCD_WriteRAM(TextColor);
}
}
else
{
for(i = 0; i < Length; i++)
{
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
LCD_WriteRAM(TextColor);
Xpos++;
LCD_SetCursor(Xpos, Ypos);
}
}
}
/**
* @brief Draws a character on LCD.
* @param Xpos: the Line where to display the character shape.
* @param Ypos: start column address.
* @param c: pointer to the character data.
* @retval None
*/
void LCD_DrawChar(uint8_t Xpos, uint16_t Ypos, const uint16_t *c)
{
uint32_t index = 0, i = 0;
uint8_t Xaddress = 0;
Xaddress = Xpos;
LCD_SetCursor(Xaddress, Ypos);
for(index = 0; index < 24; index++)
{
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
for(i = 0; i < 16; i++)
{
if((c[index] & (1 << i)) == 0x00)
{
LCD_WriteRAM(BackColor);
}
else
{
LCD_WriteRAM(TextColor);
}
}
LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET);
Xaddress++;
LCD_SetCursor(Xaddress, Ypos);
}
}
void display(void) {
ss = RTC_Read(0x00);
mm = RTC_Read(0x01);
hh = RTC_Read(0x02);
EE = RTC_Read(0x03);
DD = RTC_Read(0x04);
MM = RTC_Read(0x05);
YY = RTC_Read(0x06);
LCD_SetCursor(0, 0); // 表示位置を設定する
LCD_Putc(YY / 16 + '0');
LCD_Putc(YY % 16 + '0');
LCD_Putc('/');
LCD_Putc(MM / 16 + '0');
LCD_Putc(MM % 16 + '0');
LCD_Putc('/');
LCD_Putc(DD / 16 + '0');
LCD_Putc(DD % 16 + '0');
LCD_SetCursor(0, 1); // 表示位置を設定する
LCD_Putc(hh / 16 + '0');
LCD_Putc(hh % 16 + '0');
LCD_Putc(':');
LCD_Putc(mm / 16 + '0');
LCD_Putc(mm % 16 + '0');
LCD_Putc('-');
LCD_Putc(ss / 16 + '0');
LCD_Putc(ss % 16 + '0');
}
/**
* @brief Clears the hole LCD.
* @param Color: the color of the background.
* @retval None
*/
void LCD_Clear(uint16_t Color)
{
uint32_t index = 0;
if(LCDType == LCD_HX8347D)
{
LCD_SetCursor(0, 0);
}
else
{
LCD_SetCursor(0, 319);
}
/* Prepare to write GRAM */
LCD_WriteRAM_Prepare();
for(index = 0; index < (uint32_t)320*240; index++)
{
LCD_WriteRAM(Color);
}
/* Wait until a data is sent(not busy), before config /CS HIGH */
while (SPI_I2S_GetFlagStatus(LCD_SPI, SPI_I2S_FLAG_BSY) != RESET);
LCD_CtrlLinesWrite(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, Bit_SET);
}
void LCD_DisplayTime(unsigned char hr,unsigned char min, unsigned char sec)
{
uint8_t d_hour, d_min, d_sec;
uint8_t digit0=0, digit1=0, digit2=0;
d_hour = bcd2dec(hr);
d_min = bcd2dec(min);
d_sec = bcd2dec(sec);
if ( Time_Format == 1 ) // 12 hour format
{
LCD_SetCursor(1,14);
if (d_hour >12)
{
d_hour -= 12;
LCD_Printf("PM");
}
else
{
if ( d_hour == 0) // time is 12 AM
{
d_hour = 12;
}
LCD_Printf("AM");
}
}
if ( Display_Style == 1) // both date and time are displayed in this style
{
LCD_GoToLine(1);
LCD_Printf(" %2d:%2d:%2d",d_hour,d_min,d_sec);
}
else // only date is displayed, so display big numbers
{
digit1 = d_hour/10;
digit0= d_hour%10;
LCD_DisplayBigNum(digit1,0); //display hour
LCD_DisplayBigNum(digit0,3);
// set colon
LCD_SetCursor(1,6);
lcd_DataWrite(0xA5);
LCD_SetCursor(2,6);
lcd_DataWrite(0xA5);
//display min
digit1 = d_min/10;
digit0= d_min%10;
LCD_DisplayBigNum(digit1,7);
LCD_DisplayBigNum(digit0,10);
//display sec
LCD_SetCursor(2,14);
LCD_Printf("%2x",sec);
}
}
/**********************************************
函数名：Lcd块选函数
功能：选定Lcd上指定的矩形区域
注意：xStart和 yStart随着屏幕的旋转而改变，位置是矩形框的四个角
入口参数：xStart x方向的起始点
ySrart y方向的终止点
xLong 要选定矩形的x方向长度
yLong 要选定矩形的y方向长度
返回值：无
***********************************************/
void Lcd_SetBox(unsigned int xStart,unsigned int yStart,unsigned int xLong,unsigned int yLong)
{
#if ID_AM==000
LCD_SetCursor(xStart+xLong-1,312-yStart+yLong-1);
#elif ID_AM==001
LCD_SetCursor(xStart+xLong-1,312-yStart+yLong-1);
#elif ID_AM==010
LCD_SetCursor(xStart,312-yStart+yLong-1);
#elif ID_AM==011
LCD_SetCursor(xStart,312-yStart+yLong-1);
#elif ID_AM==100
LCD_SetCursor(xStart+xLong-1,312-yStart);
#elif ID_AM==101
LCD_SetCursor(xStart+xLong-1,312-yStart);
#elif ID_AM==110
LCD_SetCursor(xStart,312-yStart);
#elif ID_AM==111
LCD_SetCursor(xStart,312-yStart);
#endif
LCD_WR_REG(0x0050,xStart);//水平 GRAM起始位置
LCD_WR_REG(0x0051,xStart+xLong-1);//水平GRAM终止位置
LCD_WR_REG(0x0052,312-yStart);//垂直GRAM起始位置
LCD_WR_REG(0x0053,312-yStart+yLong-1);//垂直GRAM终止位置
}
void LCD_DrawCircle2(u8 Xpos, u16 Ypos, u16 Radius)
{
s32 D;/* Decision Variable */
u32 CurX;/* Current X Value */
u32 CurY;/* Current Y Value */
D = 3 - (Radius << 1);
CurX = 0;
CurY = Radius;
while (CurX <= CurY)
{
LCD_SetCursor(Xpos + CurX, Ypos + CurY);
LCD_WriteRAMWord(BackColor);
LCD_SetCursor(Xpos + CurX, Ypos - CurY);
LCD_WriteRAMWord(BackColor);
LCD_SetCursor(Xpos - CurX, Ypos + CurY);
LCD_WriteRAMWord(BackColor);
LCD_SetCursor(Xpos - CurX, Ypos - CurY);
LCD_WriteRAMWord(BackColor);
LCD_SetCursor(Xpos + CurY, Ypos + CurX);
LCD_WriteRAMWord(BackColor);
LCD_SetCursor(Xpos + CurY, Ypos - CurX);
LCD_WriteRAMWord(BackColor);
LCD_SetCursor(Xpos - CurY, Ypos + CurX);
LCD_WriteRAMWord(BackColor);
LCD_SetCursor(Xpos - CurY, Ypos - CurX);
LCD_WriteRAMWord(BackColor);
if (D < 0)
{
D += (CurX << 2) + 6;
}
else
{
D += ((CurX - CurY) << 2) + 10;
CurY--;
}
CurX++;
}
}
//DCMI,启动传输
void DCMI_Start(void)
{
LCD_SetCursor(0,0);
LCD_WriteRAM_Prepare(); //开始写入GRAM
DMA2_Stream1->CR|=1<<0; //开启DMA2,Stream1
DCMI->CR|=1<<0; //DCMI捕获使能
}
/**
* @brief Sets display window.
* @param LayerIndex: layer index
* @param Xpos: LCD X position
* @param Ypos: LCD Y position
* @param Width: LCD window width
* @param Height: LCD window height
* @retval None
*/
static void SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
{
uint32_t value = 0;
LCD_WriteReg(SSD2119_H_RAM_START_REG, Xpos);
if ((Xpos+Width) >= LCD_PIXEL_WIDTH) {
LCD_WriteReg(SSD2119_H_RAM_END_REG, LCD_PIXEL_WIDTH-1);
} else {
LCD_WriteReg(SSD2119_H_RAM_END_REG, Xpos+Width);
}
if ((Ypos+Height) >= LCD_PIXEL_HEIGHT) {
value = (LCD_PIXEL_HEIGHT-1) << 8;
} else {
value = (Ypos+Height) << 8;
}
value |= Xpos;
LCD_WriteReg(SSD2119_V_RAM_POS_REG, value);
LCD_SetCursor(Xpos, Ypos);
// /********************************************************************//**
// * @brief for stm324fxG Eval EmWin
// **********************************************************************/
// /* Horizontal GRAM Start Address */
// LCD_WriteReg(SSD2119_H_RAM_START_REG, (Ypos));
// /* Horizontal GRAM End Address */
// LCD_WriteReg(SSD2119_H_RAM_END_REG, (Ypos + Height - 1));
//
// value = (LCD_PIXEL_WIDTH - Xpos - 1) << 8; // End addr
// value |= (LCD_PIXEL_WIDTH - Xpos - Width); // Begin Addr
// /* Vertical GRAM Start and End Address */
// LCD_WriteReg(SSD2119_V_RAM_POS_REG, value);
}
/**
* @brief Sets a display window
* @param Xpos: specifies the X buttom left position.
* @param Ypos: specifies the Y buttom left position.
* @param Height: display window height.
* @param Width: display window width.
* @retval None
*/
void LCD_SetDisplayWindow(uint8_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width)
{
/* Horizontal GRAM Start Address */
if(Xpos >= Height)
{
LCD_WriteReg(R80, (Xpos - Height + 1));
}
else
{
LCD_WriteReg(R80, 0);
}
/* Horizontal GRAM End Address */
LCD_WriteReg(R81, Xpos);
/* Vertical GRAM Start Address */
if(Ypos >= Width)
{
LCD_WriteReg(R82, (Ypos - Width + 1));
}
else
{
LCD_WriteReg(R82, 0);
}
/* Vertical GRAM End Address */
LCD_WriteReg(R83, Ypos);
LCD_SetCursor(Xpos, Ypos);
}
/**
* @brief Clears the hole LCD.
* @param Color: the color of the background.
* @retval None
*/
void LCD_Clear(uint16_t Color)
{
uint32_t index = 0;
if (LCD_ID == LCD_HX8347D) {
LCD_SetCursor(0x00, 0x0000);
} else {
LCD_SetCursor(0x00, 0x013F);
}
/* Prepare to write GRAM */
LCD_WriteRAM_Prepare();
for (index = 0; index < 76800; index++) {
LCD->LCD_RAM = Color;
}
}
//在指定位置显示一个汉字(32*32大小)
void showhanzi32(unsigned int x,unsigned int y,unsigned char index)
{
unsigned char i,j,k;
const unsigned char *temp=hanzi32;
temp+=index*128;
for(j=0;j<32;j++)
{
LCD_SetCursor(x,y+j);
LCD_WriteRAM_Prepare(); //开始写入GRAM
for(k=0;k<4;k++)
{
for(i=0;i<8;i++)
{
if((*temp&(1<<i))!=0)
{
LCD_WR_DATA(POINT_COLOR);
}
else
{
LCD_WR_DATA(BACK_COLOR);
}
}
temp++;
}
}
}
/*******************************************************************************
* Function Name : DrawClear_iLine
* Description : отрисовка или очистка одной линии при линейной интерполяции
* Input : X0pos, Y0pos, X1pos, Y1pos, clear
* Return : None
*******************************************************************************/
static __inline void DrawClear_iLine(uint16_t X0pos, uint16_t Y0pos, uint16_t Y1pos, DrawState NewDrawState)
{
uint16_t clrColor;
uint16_t i, j;
uint16_t tmpY;
if(Y1pos < Y0pos){ tmpY = Y0pos; Y0pos = Y1pos; Y1pos = tmpY; }
if(Y1pos - Y0pos == 0) j = 1;
else j = Y1pos - Y0pos;
Set_LCD_CS();
LCD_SetCursor(X0pos,Y0pos); // Установка курсора в нужную позицию
if(NewDrawState == CLEAR)
{
for (i = 0; i < j; i++)
{
/* Проверяем на совпадение координат очистки с сеткой, если совпало то очищаем цветом сетки */
clrColor = Verify_Grid_Match(X0pos, Y0pos);
LCD_PutPixel(clrColor); // очистить точку на установленной позиции
Y0pos++;
}
}
else // if(NewDrawState == DRAW)
{
for (i = 0; i < j; i++) LCD_PutPixel(pINFO->Color); // Нарисовать точку на установленной позиции
}
Reset_LCD_CS();
}
/*******************************************************************************
* Function Name : Clear_OLD_Data_MIN_MAX
* Description : очистка, режим максимумов/минимумов
* Input : None
* Return : None
*******************************************************************************/
static void Clear_OLD_Data_MIN_MAX(uint16_t X0, uint16_t X1)
{
uint16_t cnt_, point = X0 - leftLimit, tmL, Length, clrColor;
uint16_t num = (X1 - X0) * 2;
/* Очищаем старую осциллограмму */
Set_LCD_CS();
for (cnt_ = (point * 2); cnt_ < num; cnt_ += 2)
{
if(pINFO->OldData_PointsFlag[point] == ENABLE)
{
LCD_SetCursor(point + leftLimit + 1, pINFO->visDATA[cnt_]);
Length = fabs(pINFO->visDATA[cnt_+1] - pINFO->visDATA[cnt_]);
if((Length < 1) || (Length > 190)) Length = 1;
tmL = 0;
/* очищаем линию от минимума до максимума */
while(tmL++ != Length)
{
/* Проверяем на совпадение координат очистки с сеткой, если совпало то очищаем цветом сетки */
clrColor = Verify_Grid_Match(point + leftLimit + 1, pINFO->visDATA[cnt_] + tmL - 1);
LCD_PutPixel(clrColor);
}
}
pINFO->OldData_PointsFlag[point] = DISABLE;
point++;
}
Reset_LCD_CS();
}
/*******************************************************************************
* Function Name : DrawClear_iLine
* Description : отрисовка или очистка одной линии при линейной интерполяции
* Input : X0pos, Y0pos, X1pos, Y1pos, clear
* Return : None
*******************************************************************************/
static __inline void DrawClear_MAXMIN_Line(uint16_t X0pos, uint16_t Y0pos, uint16_t Y1pos, DrawState NewDrawState)
{
uint16_t tmL = 0, tmpY;
uint16_t clrColor; // цвет очистки
int16_t Length; // длинна линни для отрисовки/очистки
if(Y1pos < Y0pos){ tmpY = Y0pos; Y0pos = Y1pos; Y1pos = tmpY; }
Set_LCD_CS(); // установить низкий уровень CS LCD
// используем "низкоуровневый" доступ к ЖК для макс. скорости
LCD_SetCursor(X0pos, Y0pos);
Length = Y1pos - Y0pos;
if((Length <= 0) || (Length > 190)) Length = 1;
if(NewDrawState == CLEAR)
{
while(tmL++ != Length) // очищаем линию от минимума до максимума
{
/* Проверяем на совпадение координат очистки с сеткой, если совпало то очищаем цветом сетки */
clrColor = Verify_Grid_Match(X0pos, Y0pos + tmL - 1);
LCD_PutPixel(clrColor);
}
}
else // if(NewDrawState == DRAW)
{
while(tmL++ != Length) LCD_PutPixel(pINFO->Color); // Нарисовать точку на установленной позиции
}
Reset_LCD_CS();
}
/**
* @brief Displays a bitmap picture loaded in the internal Flash.
* @param BmpAddress: Bmp picture address in the internal Flash.
* @retval None
*/
static void LCD_WriteBMP(uint16_t Xpos, uint16_t Ypos, uint8_t *pbmp)
{
uint32_t index = 0, size = 0;
/* Read bitmap size */
size = *(__IO uint16_t *) (pbmp + 2);
size |= (*(__IO uint16_t *) (pbmp + 4)) << 16;
/* Get bitmap data address offset */
index = *(__IO uint16_t *) (pbmp + 10);
index |= (*(__IO uint16_t *) (pbmp + 12)) << 16;
size = (size - index)/2;
pbmp += index;
/* Set GRAM write direction and BGR = 1 */
/* I/D=00 (Horizontal : decrement, Vertical : decrement) */
/* AM=1 (address is updated in vertical writing direction) */
LCD_WriteReg(SSD2119_ENTRY_MODE_REG, ENTRY_MODE_BMP);
LCD_SetCursor(Xpos, Ypos);
LCD_WriteRAM_Prepare();
for(index = 0; index < size; index++)
{
LCD_WriteRAM(*(__IO uint16_t *)pbmp);
pbmp += 2;
}
/* Set GRAM write direction and BGR = 1 */
/* I/D = 01 (Horizontal : increment, Vertical : decrement) */
/* AM = 1 (address is updated in vertical writing direction) */
LCD_WriteReg(SSD2119_ENTRY_MODE_REG, ENTRY_MODE_DEFAULT);
}
void LCD_Clear(uint16_t color) {
uint32_t index = 0;
LCD_SetCursor(0x00, 0x00);
LCD_WriteRAM_Prepare();
for(index = 0; index <76800; index++){
LCD_RAM = color;
}
}
static void clear( color c = white ){
int d = from_color( c );
LCD_SetCursor( 0x00, 0x0000 );
Write_Cmd( 0x22 ); // write RAM prepare
for( int index = 0; index < 76800; index++ ){
Write_Dat( d );
}
}
u16 LCD_ReadPoint(u16 x,u16 y)
{
LCD_SetCursor(x,y);
LCD_ReadReg(0x0022); //读的第一个数据丢弃
opt_delay(2);
return LCD->LCD_RAM;
}
//读取个某点的颜色值
//x:0~239
//y:0~319
//返回值:此点的颜色
u16 LCD_ReadPoint(u16 x,u16 y)
{
u16 r,g,b;
if(x>=LCD_W||y>=LCD_H)return 0; //超过了范围,直接返回
LCD_SetCursor(x,y);
if(DeviceCode==0X9341)LCD_WR_REG(0X2E); //ILI9341发送读GRAM指令
else LCD_WR_REG(R34); //其他IC发送读GRAM指令
GPIOB->CRL=0X88888888; //PB0-7 上拉输入
GPIOB->CRH=0X88888888; //PB8-15 上拉输入
GPIOB->ODR=0XFFFF; //全部输出高
#if LCD_FAST_IO==1 //快速IO
LCD_RS_SET;
LCD_CS_CLR;
//读取数据(读GRAM时,第一次为假读)
LCD_RD_CLR;
delay_us(1);//延时1us
LCD_RD_SET;
//dummy READ
LCD_RD_CLR;
delay_us(1);//延时1us
LCD_RD_SET;
r=DATAIN;
if(DeviceCode==0X9341)
{
LCD_RD_CLR;
LCD_RD_SET;
b=DATAIN;//读取蓝色值
g=r&0XFF;//对于9341,第一次读取的是RG的值,R在前,G在后,各占8位
g<<=8;
}
LCD_CS_SET;
#else
LCD_RS=1;
LCD_CS=0;
//读取数据(读GRAM时,需要读2次)
LCD_RD=0;
LCD_RD=1;
//dummy READ
LCD_RD=0;
LCD_RD=1;
r=DATAIN;
if(DeviceCode==0X9341)
{
LCD_RD=0;
LCD_RD=1;
b=DATAIN;//读取蓝色值
g=r&0XFF;//对于9341,第一次读取的是RG的值,R在前,G在后,各占8位
g<<=8;
}
LCD_CS=1;
#endif
GPIOB->CRL=0X33333333; //PB0-7 上拉输出
GPIOB->CRH=0X33333333; //PB8-15 上拉输出
GPIOB->ODR=0XFFFF; //全部输出高
if(DeviceCode==0X9325||DeviceCode==0X4535||DeviceCode==0X4531||DeviceCode==0X8989||DeviceCode==0XB505)return r; //这几种IC直接返回颜色值
else if(DeviceCode==0X9341)return (((r>>11)<<11)|((g>>10)<<5)|(b>>11)); //ILI9341需要公式转换一下
else return LCD_BGR2RGB(r); //其他IC
/**
* \brief Draw a pixel on LCD of given color.
*
* \param x X-coordinate of pixel.
* \param y Y-coordinate of pixel.
* \param color Pixel color.
*/
void LCDD_DrawPixel(
uint32_t x,
uint32_t y,
uint32_t color)
{
LCD_SetCursor(x, y);
LCD_WriteRAM_Prepare();
LCD_WriteRAM(color);
}
void LCD_SetArea(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) {
FSMC_LCD_Write_Command(0x44);
FSMC_LCD_Write_Data((x2 << 8) | x1); // Source RAM address window
FSMC_LCD_Write_Command(0x45);
FSMC_LCD_Write_Data(y1); // Gate RAM address window
FSMC_LCD_Write_Command(0x46);
FSMC_LCD_Write_Data(y2); // Gate RAM address window
LCD_SetCursor(x1, y1);
}
/**
* @brief Reads an LCD pixel.
* @param Xpos: X position
* @param Ypos: Y position
* @retval RGB pixel color
*/
uint16_t BSP_LCD_ReadPixel(uint16_t Xpos, uint16_t Ypos)
{
uint16_t ret=0;
LCD_SetCursor(Xpos, Ypos);
LCD_WriteRAM_Prepare(); /* Prepare to write GRAM */
ret = LCD_ReadRAM();
return ret;
}
/*****************************************************************************
** �������: LCD_SetDisplayWindow
** ��������: ���ô��ں��� (��Width��Height����һ�£�ǰ����)
** �� ����: Dream
** �ա� ��: 2010��12��06��
*****************************************************************************/
void LCD_SetDisplayWindow(uint8_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width)
{
LCD_WriteReg(R80, Xpos); //ˮƽ����GRAM��ʼ��ַ
LCD_WriteReg(R81, Xpos+Height); //ˮƽ����GRAM�����ַ
LCD_WriteReg(R82, Ypos); //��ֱ����GRAM��ʼ��ַ
LCD_WriteReg(R83, Ypos+Width); //��ֱ����GRAM�����ַ
LCD_SetCursor(Xpos, Ypos); //���ù��λ��
}
void LCD_Clear(uint16_t color) {
uint32_t index = 0;
LCD_SetCursor(0, 0);
FSMC_LCD_Write_Command(0x22);
for (index = 0; index < 240 * 320; index++) {
FSMC_LCD_Write_Data(color);
}
FSMC_LCD_Write_Command(0x0022);
}
uint8_t LCD_DisplayMenu()
{
int8_t keycount=0;
LCD_Clear();
LCD_GoToLine(1);
LCD_DisplayString(" Settings ");
do
{
if (util_IsBitCleared(Button, cancel))
{
return (-1);
}
if(util_IsBitCleared(Button, up))
{
keycount++;
_delay_ms(100);
}
if(util_IsBitCleared(Button, down))
{
keycount--;
_delay_ms(100);
}
if((keycount>=menusize)||(keycount <= -menusize))
{
keycount=0;
}
if(keycount<0)
{
//make menu index circular. i.e decrement from first
//option shows the last option on the menu
keycount += menusize;
}
LCD_GoToLine(2);
LCD_DisplayString(" "); //clear second line
//set cursor at the center of of line 2 depending on string size.
LCD_SetCursor(2,(14-strlen(settings[keycount]))/2);
LCD_Printf("<%s>", settings[keycount]);
_delay_ms(100); //make menu visible or else will overwrite at fast speed
}while(util_IsBitSet(Button,select));
do
{
if (util_IsBitCleared(Button, cancel))
{
return (-1); ;
}
}while(util_IsBitSet(Button, select));
return (keycount);
}
/*****************************************************************************
** �������: LCD_Clear
** ��������: ����Ļ����
** �� ����: Dream
** �ա� ��: 2010��12��06��
*****************************************************************************/
void LCD_Clear(uint16_t Color)
{
uint32_t index=0;
LCD_SetCursor(0x00,0x0000); //���ù��λ��
LCD_WriteRAM_Prepare(); //��ʼд��GRAM
for(index=0;index<76800;index++)
{
Write_Dat(Color);
}
}
