/*
** Function Name : process_MFC_PowerUp
**
** Function Description : This function Power up MFC.
*/
CEDEVICE_POWER_STATE
process_MFC_PowerUp(DWORD OpenHandle, PCEDEVICE_POWER_STATE mfc_pwr_state)
{
unsigned int nNumOfInstance = 0;
if ( *mfc_pwr_state == D4)
{
for (int inst_no = 0; inst_no < MFC_NUM_INSTANCES_MAX; inst_no++)
{
MFCInstCtx *mfcinst_ctx = MFCInst_GetCtx(inst_no);
if (mfcinst_ctx) {
nNumOfInstance++;
// On Power Up, the state of the MFC instance is recovered.
MFCInst_PowerOnState(mfcinst_ctx);
}
}
LOG_MSG(LOG_TRACE, "MFC_IOControl", "[MFC IOCTL_POWER_SET] nNumOfInstance = 0x%X \r\n",nNumOfInstance);
if (is_mfc_on)
{
Mfc_Pwr_On();
Mfc_Clk_On();
MFC_Wakeup();
Mfc_Clk_Off();
LOG_MSG(LOG_TRACE, "MFC_IOControl", "[MFC IOCTL_POWER_SET] POWER UP, handle = 0x%X \r\n",(DWORD) OpenHandle);
}
}
*mfc_pwr_state = D0; // MFC power state is now changed to D0(Power On) state.
RETAILMSG(1, (L"[MFC] WakeUP! (NumOfInstance=%d) \r\n", nNumOfInstance));
return *mfc_pwr_state;
}
static int s3c_mfc_resume(struct platform_device *pdev)
{
unsigned int dwMfcBase;
int i, index = 0;
MFCInstCtx *mfcinst_ctx;
int inst_no;
int is_mfc_on = 0;
#ifndef CONFIG_PLAT_S5P64XX
unsigned int mfc_pwr, domain_v_ready;
unsigned mfc_clk_val;
unsigned int mfc_clk_temp;
#endif /* CONFIG_PLAT_S5P64XX */
int tmp_openhandle_count;
MFC_Mutex_Lock();
tmp_openhandle_count = _openhandle_count;
#ifdef USE_MFC_DOMAIN_GATING
{
int tmp_openhandle_count = _openhandle_count;
while (tmp_openhandle_count-- > 0)
{
CLOCK_ENABLE;
}
}
#endif /* USE_MFC_DOMAIN_GATING */
#ifndef CONFIG_PLAT_S5P64XX
// mfc clock set 133 Mhz
mfc_clk_val = readl(S3C_CLK_DIV0);
mfc_clk_temp = (mfc_clk_val & (0xF << 28))>>28;
if(mfc_clk_temp == 0)
{ /* MFC clock shouldn't exceed 133MHZ */
mfc_clk_val |= (1<<28);
}
else if(mfc_clk_temp >= 2)
{ /*If MFC clock rate is less than 66MHZ, It is recommended to reset it to 133MHz */
mfc_clk_val = mfc_clk_val & (~(0xF << 28));
mfc_clk_val |= (1<<28);
}
__raw_writel(mfc_clk_val, S3C_CLK_DIV0);
// 1. MFC Power On(Domain V)
mfc_pwr = readl(S3C_NORMAL_CFG);
mfc_pwr |= (1<<9);
__raw_writel(mfc_pwr, S3C_NORMAL_CFG);
// 2. Check MFC power on
do {
domain_v_ready = readl(S3C_BLK_PWR_STAT);
printk("domain v ready : 0x%X\n", domain_v_ready);
msleep(1);
}while(!(domain_v_ready & (1<<1)));
#endif /* CONFIG_PLAT_S5P64XX */
// 3. Firmware download
MfcFirmwareIntoCodeDownReg();
// 4. Power On state
// Validate all the MFC Instances
for (inst_no = 0; inst_no < MFC_NUM_INSTANCES_MAX; inst_no++) {
mfcinst_ctx = MFCInst_GetCtx(inst_no);
if (mfcinst_ctx) {
is_mfc_on = 1;
// When MFC Power On, the MFC instance is validated.
// Then the MFC operations (DEC_EXE, ENC_EXE, etc.) will be performed again
MFCInst_PowerOnState(mfcinst_ctx);
printk(KERN_INFO "MFC_Resume %d-th instance is validated\n", inst_no);
}
}
if (is_mfc_on) {
// 5. Restore MFC SFR
dwMfcBase = (unsigned int)GetMfcSfrVirAddr();
for( i=SAVE_START_ADDR; i<= SAVE_END_ADDR; i+=4 )
{
MFC_WRITE_REG( ( dwMfcBase + i ), mfc_save[index] );
index++;
}
// 6. Command MFC wakeup
MFC_Wakeup();
}
#ifdef USE_MFC_DOMAIN_GATING
if(_openhandle_count == 0) {
DOMAIN_POWER_OFF;
}
#endif /* USE_MFC_DOMAIN_GATING */
MFC_Mutex_Release();
return 0;
}
