static int
atphy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
mii_softc_init(sc, ma);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_service = atphy_service;
sc->mii_pdata = mii;
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
mii->mii_instance++;
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
device_printf(dev, " ");
if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0 &&
(sc->mii_extcapabilities & EXTSR_MEDIAMASK) == 0)
kprintf("no media present");
else
mii_phy_add_media(sc);
kprintf("\n");
atphy_reset(sc);
MIIBUS_MEDIAINIT(sc->mii_dev);
return 0;
}
static void
miibus_mediainit(device_t dev)
{
struct mii_data *mii;
struct ifmedia_entry *m;
int media = 0;
/* Poke the parent in case it has any media of its own to add. */
MIIBUS_MEDIAINIT(device_get_parent(dev));
mii = device_get_softc(dev);
for (m = LIST_FIRST(&mii->mii_media.ifm_list); m != NULL;
m = LIST_NEXT(m, ifm_list)) {
media = m->ifm_media;
if (media == (IFM_ETHER|IFM_AUTO))
break;
}
ifmedia_set(&mii->mii_media, media);
return;
}
static int
amphy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = amphy_service;
sc->mii_pdata = mii;
mii->mii_instance++;
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
#if 0
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
MII_MEDIA_100_TX);
#endif
mii_phy_reset(sc);
sc->mii_capabilities =
PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
device_printf(dev, " ");
mii_phy_add_media(sc);
printf("\n");
#undef ADD
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
nsgphy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
const struct mii_phydesc *mpd;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
mpd = mii_phy_match(ma, gphyters);
if (bootverbose)
device_printf(dev, "<rev. %d>\n", MII_REV(ma->mii_id2));
device_printf(dev, " ");
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = nsgphy_service;
sc->mii_pdata = mii;
sc->mii_anegticks = 5;
mii->mii_instance++;
sc->mii_capabilities = (PHY_READ(sc, MII_BMSR) |
(BMSR_10TFDX|BMSR_10THDX)) & ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
mii_phy_add_media(sc);
printf("\n");
MIIBUS_MEDIAINIT(sc->mii_dev);
return(0);
}
static int
bmtphy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = bmtphy_service;
sc->mii_pdata = mii;
mii_phy_reset(sc);
mii->mii_instance++;
sc->mii_capabilities =
PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
device_printf(dev, " ");
if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
printf("no media present");
else
mii_phy_add_media(sc);
printf("\n");
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
tlphy_attach(device_t dev)
{
struct tlphy_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
const char *sep = "";
int capmask = 0xFFFFFFFF;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
mii_softc_init(&sc->sc_mii, ma);
sc->sc_mii.mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->sc_mii.mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, &sc->sc_mii, mii_list);
sc->sc_mii.mii_inst = mii->mii_instance;
sc->sc_mii.mii_service = tlphy_service;
sc->sc_mii.mii_reset = mii_phy_reset;
sc->sc_mii.mii_pdata = mii;
if (mii->mii_instance) {
struct mii_softc *other;
device_t *devlist;
int devs, i;
device_get_children(sc->sc_mii.mii_dev, &devlist, &devs);
for (i = 0; i < devs; i++) {
if (strcmp(device_get_name(devlist[i]), "tlphy")) {
other = device_get_softc(devlist[i]);
capmask &= ~other->mii_capabilities;
break;
}
}
kfree(devlist, M_TEMP);
}
mii->mii_instance++;
sc->sc_mii.mii_flags &= ~MIIF_NOISOLATE;
mii_phy_reset(&sc->sc_mii);
sc->sc_mii.mii_flags |= MIIF_NOISOLATE;
/*
* Note that if we're on a device that also supports 100baseTX,
* we are not going to want to use the built-in 10baseT port,
* since there will be another PHY on the MII wired up to the
* UTP connector. The parent indicates this to us by specifying
* the TLPHY_MEDIA_NO_10_T bit.
*/
sc->sc_mii.mii_capabilities =
PHY_READ(&sc->sc_mii, MII_BMSR) & capmask /*ma->mii_capmask*/;
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_LOOP,
sc->sc_mii.mii_inst), MII_MEDIA_10_T);
#define PRINT(s) kprintf("%s%s", sep, s); sep = ", "
device_printf(dev, " ");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0, sc->sc_mii.mii_inst), 0);
PRINT("10base2/BNC");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_5, 0, sc->sc_mii.mii_inst), 0);
PRINT("10base5/AUI");
if (sc->sc_mii.mii_capabilities & BMSR_MEDIAMASK) {
kprintf("%s", sep);
mii_phy_add_media(&sc->sc_mii);
} else {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->sc_mii.mii_inst),
MII_MEDIA_NONE);
}
kprintf("\n");
#undef ADD
#undef PRINT
MIIBUS_MEDIAINIT(sc->sc_mii.mii_dev);
return(0);
}
/* Attach the PHY to the MII bus */
static int
brgphy_attach(device_t dev)
{
struct brgphy_softc *bsc;
struct bge_softc *bge_sc = NULL;
struct bce_softc *bce_sc = NULL;
struct mii_softc *sc;
struct ifnet *ifp;
bsc = device_get_softc(dev);
sc = &bsc->mii_sc;
mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE,
&brgphy_funcs, 0);
bsc->serdes_flags = 0;
ifp = sc->mii_pdata->mii_ifp;
/* Find the MAC driver associated with this PHY. */
if (strcmp(ifp->if_dname, "bge") == 0)
bge_sc = ifp->if_softc;
else if (strcmp(ifp->if_dname, "bce") == 0)
bce_sc = ifp->if_softc;
/* Handle any special cases based on the PHY ID */
switch (sc->mii_mpd_oui) {
case MII_OUI_BROADCOM:
switch (sc->mii_mpd_model) {
case MII_MODEL_BROADCOM_BCM5706:
case MII_MODEL_BROADCOM_BCM5714:
/*
* The 5464 PHY used in the 5706 supports both copper
* and fiber interfaces over GMII. Need to check the
* shadow registers to see which mode is actually
* in effect, and therefore whether we have 5706C or
* 5706S.
*/
PHY_WRITE(sc, BRGPHY_MII_SHADOW_1C,
BRGPHY_SHADOW_1C_MODE_CTRL);
if (PHY_READ(sc, BRGPHY_MII_SHADOW_1C) &
BRGPHY_SHADOW_1C_ENA_1000X) {
bsc->serdes_flags |= BRGPHY_5706S;
sc->mii_flags |= MIIF_HAVEFIBER;
}
break;
}
break;
case MII_OUI_BROADCOM2:
switch (sc->mii_mpd_model) {
case MII_MODEL_BROADCOM2_BCM5708S:
bsc->serdes_flags |= BRGPHY_5708S;
sc->mii_flags |= MIIF_HAVEFIBER;
break;
case MII_MODEL_BROADCOM2_BCM5709S:
/*
* XXX
* 5720S and 5709S shares the same PHY id.
* Assume 5720S PHY if parent device is bge(4).
*/
if (bge_sc != NULL)
bsc->serdes_flags |= BRGPHY_5708S;
else
bsc->serdes_flags |= BRGPHY_5709S;
sc->mii_flags |= MIIF_HAVEFIBER;
break;
}
break;
}
PHY_RESET(sc);
/* Read the PHY's capabilities. */
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & sc->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
device_printf(dev, " ");
#define ADD(m, c) ifmedia_add(&sc->mii_pdata->mii_media, (m), (c), NULL)
/* Add the supported media types */
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
mii_phy_add_media(sc);
printf("\n");
} else {
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX, sc->mii_inst),
BRGPHY_S1000 | BRGPHY_BMCR_FDX);
printf("1000baseSX-FDX, ");
/* 2.5G support is a software enabled feature on the 5708S and 5709S. */
if (bce_sc && (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_2500_SX, IFM_FDX, sc->mii_inst), 0);
printf("2500baseSX-FDX, ");
} else if ((bsc->serdes_flags & BRGPHY_5708S) && bce_sc &&
(detect_hs21(bce_sc) != 0)) {
/*
* There appears to be certain silicon revision
* in IBM HS21 blades that is having issues with
* this driver wating for the auto-negotiation to
* complete. This happens with a specific chip id
* only and when the 1000baseSX-FDX is the only
* mode. Workaround this issue since it's unlikely
* to be ever addressed.
*/
printf("auto-neg workaround, ");
bsc->serdes_flags |= BRGPHY_NOANWAIT;
}
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0);
printf("auto\n");
}
#undef ADD
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
tlphy_attach(device_t dev)
{
device_t *devlist;
struct mii_softc *other, *sc_mii;
const char *sep = "";
int capmask, devs, i;
sc_mii = device_get_softc(dev);
mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &tlphy_funcs, 0);
/*
* Note that if we're on a device that also supports 100baseTX,
* we are not going to want to use the built-in 10baseT port,
* since there will be another PHY on the MII wired up to the
* UTP connector.
*/
capmask = BMSR_DEFCAPMASK;
if (sc_mii->mii_inst &&
device_get_children(sc_mii->mii_dev, &devlist, &devs) == 0) {
for (i = 0; i < devs; i++) {
if (devlist[i] != dev) {
other = device_get_softc(devlist[i]);
capmask &= ~other->mii_capabilities;
break;
}
}
free(devlist, M_TEMP);
}
PHY_RESET(sc_mii);
sc_mii->mii_capabilities = PHY_READ(sc_mii, MII_BMSR) & capmask;
#define ADD(m, c) \
ifmedia_add(&sc_mii->mii_pdata->mii_media, (m), (c), NULL)
#define PRINT(s) printf("%s%s", sep, s); sep = ", "
if ((sc_mii->mii_flags & (MIIF_MACPRIV0 | MIIF_MACPRIV1)) != 0 &&
(sc_mii->mii_capabilities & BMSR_MEDIAMASK) != 0)
device_printf(dev, " ");
if ((sc_mii->mii_flags & MIIF_MACPRIV0) != 0) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0, sc_mii->mii_inst),
0);
PRINT("10base2/BNC");
}
if ((sc_mii->mii_flags & MIIF_MACPRIV1) != 0) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_5, 0, sc_mii->mii_inst),
0);
PRINT("10base5/AUI");
}
if ((sc_mii->mii_capabilities & BMSR_MEDIAMASK) != 0) {
printf("%s", sep);
mii_phy_add_media(sc_mii);
}
if ((sc_mii->mii_flags & (MIIF_MACPRIV0 | MIIF_MACPRIV1)) != 0 &&
(sc_mii->mii_capabilities & BMSR_MEDIAMASK) != 0)
printf("\n");
#undef ADD
#undef PRINT
MIIBUS_MEDIAINIT(sc_mii->mii_dev);
return (0);
}
static int
e1000phy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
const char *sep = "";
int fast_ether = 0;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
mii_softc_init(sc, ma);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_service = e1000phy_service;
sc->mii_reset = e1000phy_reset;
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
sc->mii_pdata = mii;
sc->mii_flags |= MIIF_NOISOLATE;
switch (sc->mii_model) {
case MII_MODEL_MARVELL_E1011:
case MII_MODEL_MARVELL_E1112:
if (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK)
sc->mii_flags |= MIIF_HAVEFIBER;
break;
case MII_MODEL_MARVELL_E3082:
/* 88E3082 10/100 Fast Ethernet PHY. */
sc->mii_anegticks = MII_ANEGTICKS;
fast_ether = 1;
break;
}
mii->mii_instance++;
e1000phy_reset(sc);
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
#define PRINT(s) kprintf("%s%s", sep, s); sep = ", "
device_printf(dev, "%s", "");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
E1000_CR_ISOLATE);
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
if (!fast_ether) {
/*
* 1000T-simplex not supported; driver must ignore
* this entry, but it must be present in order to
* manually set full-duplex.
*/
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, 0,
sc->mii_inst), E1000_CR_SPEED_1000);
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, IFM_FDX,
sc->mii_inst),
E1000_CR_SPEED_1000 | E1000_CR_FULL_DUPLEX);
PRINT("1000baseT-FDX");
}
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst),
E1000_CR_SPEED_100 | E1000_CR_FULL_DUPLEX);
PRINT("100baseTX-FDX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst),
E1000_CR_SPEED_100);
PRINT("100baseTX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst),
E1000_CR_SPEED_10 | E1000_CR_FULL_DUPLEX);
PRINT("10baseTX-FDX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst),
E1000_CR_SPEED_10);
PRINT("10baseTX");
} else {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX, sc->mii_inst),
E1000_CR_SPEED_1000 | E1000_CR_FULL_DUPLEX);
PRINT("1000baseSX-FDX");
}
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0);
PRINT("auto\n");
#undef ADD
#undef PRINT
MIIBUS_MEDIAINIT(sc->mii_dev);
return(0);
}
static int
e1000phy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
const char *sep = "";
getenv_int("e1000phy_debug", &e1000phy_debug);
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = e1000phy_service;
sc->mii_pdata = mii;
sc->mii_flags |= MIIF_NOISOLATE;
mii->mii_instance++;
e1000phy_reset(sc);
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
#define PRINT(s) printf("%s%s", sep, s); sep = ", "
#if 0
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
E1000_CR_ISOLATE);
#endif
device_printf(dev, " ");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_TX, IFM_FDX, sc->mii_inst),
E1000_CR_SPEED_1000 | E1000_CR_FULL_DUPLEX);
PRINT("1000baseTX-FDX");
/*
TODO - apparently 1000BT-simplex not supported?
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_TX, 0, sc->mii_inst),
E1000_CR_SPEED_1000);
PRINT("1000baseTX");
*/
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst),
E1000_CR_SPEED_100 | E1000_CR_FULL_DUPLEX);
PRINT("100baseTX-FDX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst),
E1000_CR_SPEED_100);
PRINT("100baseTX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst),
E1000_CR_SPEED_10 | E1000_CR_FULL_DUPLEX);
PRINT("10baseTX-FDX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst),
E1000_CR_SPEED_10);
PRINT("10baseTX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0);
PRINT("auto");
printf("\n");
#undef ADD
#undef PRINT
MIIBUS_MEDIAINIT(sc->mii_dev);
return(0);
}
/* Attach the PHY to the MII bus */
static int
brgphy_attach(device_t dev)
{
struct brgphy_softc *bsc;
struct bge_softc *bge_sc = NULL;
struct bce_softc *bce_sc = NULL;
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
struct ifnet *ifp;
int fast_ether;
bsc = device_get_softc(dev);
sc = &bsc->mii_sc;
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
/* Initialize mii_softc structure */
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = brgphy_service;
sc->mii_pdata = mii;
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
sc->mii_flags |= MIIF_NOISOLATE | MIIF_NOLOOP;
mii->mii_instance++;
/* Initialize brgphy_softc structure */
bsc->mii_oui = MII_OUI(ma->mii_id1, ma->mii_id2);
bsc->mii_model = MII_MODEL(ma->mii_id2);
bsc->mii_rev = MII_REV(ma->mii_id2);
bsc->serdes_flags = 0;
fast_ether = 0;
if (bootverbose)
device_printf(dev, "OUI 0x%06x, model 0x%04x, rev. %d\n",
bsc->mii_oui, bsc->mii_model, bsc->mii_rev);
/* Handle any special cases based on the PHY ID */
switch (bsc->mii_oui) {
case MII_OUI_BROADCOM:
case MII_OUI_BROADCOM2:
break;
case MII_OUI_xxBROADCOM:
switch (bsc->mii_model) {
case MII_MODEL_xxBROADCOM_BCM5706:
/*
* The 5464 PHY used in the 5706 supports both copper
* and fiber interfaces over GMII. Need to check the
* shadow registers to see which mode is actually
* in effect, and therefore whether we have 5706C or
* 5706S.
*/
PHY_WRITE(sc, BRGPHY_MII_SHADOW_1C,
BRGPHY_SHADOW_1C_MODE_CTRL);
if (PHY_READ(sc, BRGPHY_MII_SHADOW_1C) &
BRGPHY_SHADOW_1C_ENA_1000X) {
bsc->serdes_flags |= BRGPHY_5706S;
sc->mii_flags |= MIIF_HAVEFIBER;
}
break;
} break;
case MII_OUI_xxBROADCOM_ALT1:
switch (bsc->mii_model) {
case MII_MODEL_xxBROADCOM_ALT1_BCM5708S:
bsc->serdes_flags |= BRGPHY_5708S;
sc->mii_flags |= MIIF_HAVEFIBER;
break;
} break;
default:
device_printf(dev, "Unrecognized OUI for PHY!\n");
}
ifp = sc->mii_pdata->mii_ifp;
/* Find the MAC driver associated with this PHY. */
if (strcmp(ifp->if_dname, "bge") == 0) {
bge_sc = ifp->if_softc;
} else if (strcmp(ifp->if_dname, "bce") == 0) {
bce_sc = ifp->if_softc;
}
/* Todo: Need to add additional controllers such as 5906 & 5787F */
/* The 590x chips are 10/100 only. */
if (bge_sc &&
pci_get_vendor(bge_sc->bge_dev) == BCOM_VENDORID &&
(pci_get_device(bge_sc->bge_dev) == BCOM_DEVICEID_BCM5901 ||
pci_get_device(bge_sc->bge_dev) == BCOM_DEVICEID_BCM5901A2 ||
pci_get_device(bge_sc->bge_dev) == BCOM_DEVICEID_BCM5906 ||
pci_get_device(bge_sc->bge_dev) == BCOM_DEVICEID_BCM5906M)) {
fast_ether = 1;
sc->mii_anegticks = MII_ANEGTICKS;
}
brgphy_reset(sc);
/* Read the PHY's capabilities. */
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
device_printf(dev, " ");
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
/* Create an instance of Ethernet media. */
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), BMCR_ISO);
/* Add the supported media types */
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst),
BRGPHY_S10);
printf("10baseT, ");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst),
BRGPHY_S10 | BRGPHY_BMCR_FDX);
printf("10baseT-FDX, ");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst),
BRGPHY_S100);
printf("100baseTX, ");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst),
BRGPHY_S100 | BRGPHY_BMCR_FDX);
printf("100baseTX-FDX, ");
if (fast_ether == 0) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, 0, sc->mii_inst),
BRGPHY_S1000);
printf("1000baseT, ");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, IFM_FDX, sc->mii_inst),
BRGPHY_S1000 | BRGPHY_BMCR_FDX);
printf("1000baseT-FDX, ");
}
} else {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX, sc->mii_inst),
BRGPHY_S1000 | BRGPHY_BMCR_FDX);
printf("1000baseSX-FDX, ");
/* 2.5G support is a software enabled feature on the 5708S and 5709S. */
if (bce_sc && (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_2500_SX, IFM_FDX, sc->mii_inst), 0);
printf("2500baseSX-FDX, ");
}
}
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0);
printf("auto\n");
#undef ADD
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
rlswitch_attach(device_t dev)
{
struct mii_softc *sc;
sc = device_get_softc(dev);
/*
* We handle all pseudo PHYs in a single instance.
*/
mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE,
&rlswitch_funcs, 0);
sc->mii_capabilities = BMSR_100TXFDX & sc->mii_capmask;
device_printf(dev, " ");
mii_phy_add_media(sc);
printf("\n");
#ifdef RL_DEBUG
rlswitch_phydump(dev);
#endif
#ifdef RL_VLAN
int val;
/* Global Control 0 */
val = 0;
val |= 0 << 10; /* enable 802.1q VLAN Tag support */
val |= 0 << 9; /* enable VLAN ingress filtering */
val |= 1 << 8; /* disable VLAN tag admit control */
val |= 1 << 6; /* internal use */
val |= 1 << 5; /* internal use */
val |= 1 << 4; /* internal use */
val |= 1 << 3; /* internal use */
val |= 1 << 1; /* reserved */
MIIBUS_WRITEREG(sc->mii_dev, 0, 16, val);
/* Global Control 2 */
val = 0;
val |= 1 << 15; /* reserved */
val |= 0 << 14; /* enable 1552 Bytes support */
val |= 1 << 13; /* enable broadcast input drop */
val |= 1 << 12; /* forward reserved control frames */
val |= 1 << 11; /* disable forwarding unicast frames to other VLAN's */
val |= 1 << 10; /* disable forwarding ARP broadcasts to other VLAN's */
val |= 1 << 9; /* enable 48 pass 1 */
val |= 0 << 8; /* enable VLAN */
val |= 1 << 7; /* reserved */
val |= 1 << 6; /* enable defer */
val |= 1 << 5; /* 43ms LED blink time */
val |= 3 << 3; /* 16:1 queue weight */
val |= 1 << 2; /* disable broadcast storm control */
val |= 1 << 1; /* enable power-on LED blinking */
val |= 1 << 0; /* reserved */
MIIBUS_WRITEREG(sc->mii_dev, 0, 18, val);
/* Port 0 Control Register 0 */
val = 0;
val |= 1 << 15; /* reserved */
val |= 1 << 11; /* drop received packets with wrong VLAN tag */
val |= 1 << 10; /* disable 802.1p priority classification */
val |= 1 << 9; /* disable diffserv priority classification */
val |= 1 << 6; /* internal use */
val |= 3 << 4; /* internal use */
val |= 1 << 3; /* internal use */
val |= 1 << 2; /* internal use */
val |= 1 << 0; /* remove VLAN tags on output */
MIIBUS_WRITEREG(sc->mii_dev, 0, 22, val);
/* Port 1 Control Register 0 */
val = 0;
val |= 1 << 15; /* reserved */
val |= 1 << 11; /* drop received packets with wrong VLAN tag */
val |= 1 << 10; /* disable 802.1p priority classification */
val |= 1 << 9; /* disable diffserv priority classification */
val |= 1 << 6; /* internal use */
val |= 3 << 4; /* internal use */
val |= 1 << 3; /* internal use */
val |= 1 << 2; /* internal use */
val |= 1 << 0; /* remove VLAN tags on output */
MIIBUS_WRITEREG(sc->mii_dev, 1, 22, val);
/* Port 2 Control Register 0 */
val = 0;
val |= 1 << 15; /* reserved */
val |= 1 << 11; /* drop received packets with wrong VLAN tag */
val |= 1 << 10; /* disable 802.1p priority classification */
val |= 1 << 9; /* disable diffserv priority classification */
val |= 1 << 6; /* internal use */
val |= 3 << 4; /* internal use */
val |= 1 << 3; /* internal use */
val |= 1 << 2; /* internal use */
val |= 1 << 0; /* remove VLAN tags on output */
MIIBUS_WRITEREG(sc->mii_dev, 2, 22, val);
/* Port 3 Control Register 0 */
val = 0;
val |= 1 << 15; /* reserved */
val |= 1 << 11; /* drop received packets with wrong VLAN tag */
val |= 1 << 10; /* disable 802.1p priority classification */
val |= 1 << 9; /* disable diffserv priority classification */
val |= 1 << 6; /* internal use */
val |= 3 << 4; /* internal use */
val |= 1 << 3; /* internal use */
val |= 1 << 2; /* internal use */
val |= 1 << 0; /* remove VLAN tags on output */
MIIBUS_WRITEREG(sc->mii_dev, 3, 22, val);
/* Port 4 (system port) Control Register 0 */
val = 0;
val |= 1 << 15; /* reserved */
val |= 0 << 11; /* don't drop received packets with wrong VLAN tag */
val |= 1 << 10; /* disable 802.1p priority classification */
val |= 1 << 9; /* disable diffserv priority classification */
val |= 1 << 6; /* internal use */
val |= 3 << 4; /* internal use */
val |= 1 << 3; /* internal use */
val |= 1 << 2; /* internal use */
val |= 2 << 0; /* add VLAN tags for untagged packets on output */
MIIBUS_WRITEREG(sc->mii_dev, 4, 22, val);
/* Port 0 Control Register 1 and VLAN A */
val = 0;
val |= 0x0 << 12; /* Port 0 VLAN Index */
val |= 1 << 11; /* internal use */
val |= 1 << 10; /* internal use */
val |= 1 << 9; /* internal use */
val |= 1 << 7; /* internal use */
val |= 1 << 6; /* internal use */
val |= 0x11 << 0; /* VLAN A membership */
MIIBUS_WRITEREG(sc->mii_dev, 0, 24, val);
/* Port 0 Control Register 2 and VLAN A */
val = 0;
val |= 1 << 15; /* internal use */
val |= 1 << 14; /* internal use */
val |= 1 << 13; /* internal use */
val |= 1 << 12; /* internal use */
val |= 0x100 << 0; /* VLAN A ID */
MIIBUS_WRITEREG(sc->mii_dev, 0, 25, val);
/* Port 1 Control Register 1 and VLAN B */
val = 0;
val |= 0x1 << 12; /* Port 1 VLAN Index */
val |= 1 << 11; /* internal use */
val |= 1 << 10; /* internal use */
val |= 1 << 9; /* internal use */
val |= 1 << 7; /* internal use */
val |= 1 << 6; /* internal use */
val |= 0x12 << 0; /* VLAN B membership */
MIIBUS_WRITEREG(sc->mii_dev, 1, 24, val);
/* Port 1 Control Register 2 and VLAN B */
val = 0;
val |= 1 << 15; /* internal use */
val |= 1 << 14; /* internal use */
val |= 1 << 13; /* internal use */
val |= 1 << 12; /* internal use */
val |= 0x101 << 0; /* VLAN B ID */
MIIBUS_WRITEREG(sc->mii_dev, 1, 25, val);
/* Port 2 Control Register 1 and VLAN C */
val = 0;
val |= 0x2 << 12; /* Port 2 VLAN Index */
val |= 1 << 11; /* internal use */
val |= 1 << 10; /* internal use */
val |= 1 << 9; /* internal use */
val |= 1 << 7; /* internal use */
val |= 1 << 6; /* internal use */
val |= 0x14 << 0; /* VLAN C membership */
MIIBUS_WRITEREG(sc->mii_dev, 2, 24, val);
/* Port 2 Control Register 2 and VLAN C */
val = 0;
val |= 1 << 15; /* internal use */
val |= 1 << 14; /* internal use */
val |= 1 << 13; /* internal use */
val |= 1 << 12; /* internal use */
val |= 0x102 << 0; /* VLAN C ID */
MIIBUS_WRITEREG(sc->mii_dev, 2, 25, val);
/* Port 3 Control Register 1 and VLAN D */
val = 0;
val |= 0x3 << 12; /* Port 3 VLAN Index */
val |= 1 << 11; /* internal use */
val |= 1 << 10; /* internal use */
val |= 1 << 9; /* internal use */
val |= 1 << 7; /* internal use */
val |= 1 << 6; /* internal use */
val |= 0x18 << 0; /* VLAN D membership */
MIIBUS_WRITEREG(sc->mii_dev, 3, 24, val);
/* Port 3 Control Register 2 and VLAN D */
val = 0;
val |= 1 << 15; /* internal use */
val |= 1 << 14; /* internal use */
val |= 1 << 13; /* internal use */
val |= 1 << 12; /* internal use */
val |= 0x103 << 0; /* VLAN D ID */
MIIBUS_WRITEREG(sc->mii_dev, 3, 25, val);
/* Port 4 Control Register 1 and VLAN E */
val = 0;
val |= 0x0 << 12; /* Port 4 VLAN Index */
val |= 1 << 11; /* internal use */
val |= 1 << 10; /* internal use */
val |= 1 << 9; /* internal use */
val |= 1 << 7; /* internal use */
val |= 1 << 6; /* internal use */
val |= 0 << 0; /* VLAN E membership */
MIIBUS_WRITEREG(sc->mii_dev, 4, 24, val);
/* Port 4 Control Register 2 and VLAN E */
val = 0;
val |= 1 << 15; /* internal use */
val |= 1 << 14; /* internal use */
val |= 1 << 13; /* internal use */
val |= 1 << 12; /* internal use */
val |= 0x104 << 0; /* VLAN E ID */
MIIBUS_WRITEREG(sc->mii_dev, 4, 25, val);
#endif
#ifdef RL_DEBUG
rlswitch_phydump(dev);
#endif
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
