/* The computation of z = pow(x,y) is done by
z = exp(y * log(x)) = x^y
For the special cases, see Section F.9.4.4 of the C standard:
_ pow(±0, y) = ±inf for y an odd integer < 0.
_ pow(±0, y) = +inf for y < 0 and not an odd integer.
_ pow(±0, y) = ±0 for y an odd integer > 0.
_ pow(±0, y) = +0 for y > 0 and not an odd integer.
_ pow(-1, ±inf) = 1.
_ pow(+1, y) = 1 for any y, even a NaN.
_ pow(x, ±0) = 1 for any x, even a NaN.
_ pow(x, y) = NaN for finite x < 0 and finite non-integer y.
_ pow(x, -inf) = +inf for |x| < 1.
_ pow(x, -inf) = +0 for |x| > 1.
_ pow(x, +inf) = +0 for |x| < 1.
_ pow(x, +inf) = +inf for |x| > 1.
_ pow(-inf, y) = -0 for y an odd integer < 0.
_ pow(-inf, y) = +0 for y < 0 and not an odd integer.
_ pow(-inf, y) = -inf for y an odd integer > 0.
_ pow(-inf, y) = +inf for y > 0 and not an odd integer.
_ pow(+inf, y) = +0 for y < 0.
_ pow(+inf, y) = +inf for y > 0. */
int
mpfr_pow (mpfr_ptr z, mpfr_srcptr x, mpfr_srcptr y, mpfr_rnd_t rnd_mode)
{
int inexact;
int cmp_x_1;
int y_is_integer;
MPFR_SAVE_EXPO_DECL (expo);
MPFR_LOG_FUNC
(("x[%Pu]=%.*Rg y[%Pu]=%.*Rg rnd=%d",
mpfr_get_prec (x), mpfr_log_prec, x,
mpfr_get_prec (y), mpfr_log_prec, y, rnd_mode),
("z[%Pu]=%.*Rg inexact=%d",
mpfr_get_prec (z), mpfr_log_prec, z, inexact));
if (MPFR_ARE_SINGULAR (x, y))
{
/* pow(x, 0) returns 1 for any x, even a NaN. */
if (MPFR_UNLIKELY (MPFR_IS_ZERO (y)))
return mpfr_set_ui (z, 1, rnd_mode);
else if (MPFR_IS_NAN (x))
{
MPFR_SET_NAN (z);
MPFR_RET_NAN;
}
else if (MPFR_IS_NAN (y))
{
/* pow(+1, NaN) returns 1. */
if (mpfr_cmp_ui (x, 1) == 0)
return mpfr_set_ui (z, 1, rnd_mode);
MPFR_SET_NAN (z);
MPFR_RET_NAN;
}
else if (MPFR_IS_INF (y))
{
if (MPFR_IS_INF (x))
{
if (MPFR_IS_POS (y))
MPFR_SET_INF (z);
else
MPFR_SET_ZERO (z);
MPFR_SET_POS (z);
MPFR_RET (0);
}
else
{
int cmp;
cmp = mpfr_cmpabs (x, __gmpfr_one) * MPFR_INT_SIGN (y);
MPFR_SET_POS (z);
if (cmp > 0)
{
/* Return +inf. */
MPFR_SET_INF (z);
MPFR_RET (0);
}
else if (cmp < 0)
{
/* Return +0. */
MPFR_SET_ZERO (z);
MPFR_RET (0);
}
else
{
/* Return 1. */
return mpfr_set_ui (z, 1, rnd_mode);
}
}
}
else if (MPFR_IS_INF (x))
{
int negative;
/* Determine the sign now, in case y and z are the same object */
negative = MPFR_IS_NEG (x) && is_odd (y);
if (MPFR_IS_POS (y))
MPFR_SET_INF (z);
else
MPFR_SET_ZERO (z);
if (negative)
MPFR_SET_NEG (z);
else
MPFR_SET_POS (z);
MPFR_RET (0);
}
else
{
int negative;
MPFR_ASSERTD (MPFR_IS_ZERO (x));
/* Determine the sign now, in case y and z are the same object */
negative = MPFR_IS_NEG(x) && is_odd (y);
if (MPFR_IS_NEG (y))
{
MPFR_ASSERTD (! MPFR_IS_INF (y));
MPFR_SET_INF (z);
mpfr_set_divby0 ();
}
else
MPFR_SET_ZERO (z);
if (negative)
MPFR_SET_NEG (z);
else
MPFR_SET_POS (z);
MPFR_RET (0);
}
}
/* x^y for x < 0 and y not an integer is not defined */
y_is_integer = mpfr_integer_p (y);
if (MPFR_IS_NEG (x) && ! y_is_integer)
{
MPFR_SET_NAN (z);
MPFR_RET_NAN;
}
/* now the result cannot be NaN:
(1) either x > 0
(2) or x < 0 and y is an integer */
cmp_x_1 = mpfr_cmpabs (x, __gmpfr_one);
if (cmp_x_1 == 0)
return mpfr_set_si (z, MPFR_IS_NEG (x) && is_odd (y) ? -1 : 1, rnd_mode);
/* now we have:
(1) either x > 0
(2) or x < 0 and y is an integer
and in addition |x| <> 1.
*/
/* detect overflow: an overflow is possible if
(a) |x| > 1 and y > 0
(b) |x| < 1 and y < 0.
FIXME: this assumes 1 is always representable.
FIXME2: maybe we can test overflow and underflow simultaneously.
The idea is the following: first compute an approximation to
y * log2|x|, using rounding to nearest. If |x| is not too near from 1,
this approximation should be accurate enough, and in most cases enable
one to prove that there is no underflow nor overflow.
Otherwise, it should enable one to check only underflow or overflow,
instead of both cases as in the present case.
*/
if (cmp_x_1 * MPFR_SIGN (y) > 0)
{
mpfr_t t;
int negative, overflow;
MPFR_SAVE_EXPO_MARK (expo);
mpfr_init2 (t, 53);
/* we want a lower bound on y*log2|x|:
(i) if x > 0, it suffices to round log2(x) toward zero, and
to round y*o(log2(x)) toward zero too;
(ii) if x < 0, we first compute t = o(-x), with rounding toward 1,
and then follow as in case (1). */
if (MPFR_SIGN (x) > 0)
mpfr_log2 (t, x, MPFR_RNDZ);
else
{
mpfr_neg (t, x, (cmp_x_1 > 0) ? MPFR_RNDZ : MPFR_RNDU);
mpfr_log2 (t, t, MPFR_RNDZ);
}
mpfr_mul (t, t, y, MPFR_RNDZ);
overflow = mpfr_cmp_si (t, __gmpfr_emax) > 0;
mpfr_clear (t);
MPFR_SAVE_EXPO_FREE (expo);
if (overflow)
{
MPFR_LOG_MSG (("early overflow detection\n", 0));
negative = MPFR_SIGN(x) < 0 && is_odd (y);
return mpfr_overflow (z, rnd_mode, negative ? -1 : 1);
}
}
/* Basic underflow checking. One has:
* - if y > 0, |x^y| < 2^(EXP(x) * y);
* - if y < 0, |x^y| <= 2^((EXP(x) - 1) * y);
* so that one can compute a value ebound such that |x^y| < 2^ebound.
* If we have ebound <= emin - 2 (emin - 1 in directed rounding modes),
* then there is an underflow and we can decide the return value.
*/
if (MPFR_IS_NEG (y) ? (MPFR_GET_EXP (x) > 1) : (MPFR_GET_EXP (x) < 0))
{
mpfr_t tmp;
mpfr_eexp_t ebound;
int inex2;
/* We must restore the flags. */
MPFR_SAVE_EXPO_MARK (expo);
mpfr_init2 (tmp, sizeof (mpfr_exp_t) * CHAR_BIT);
inex2 = mpfr_set_exp_t (tmp, MPFR_GET_EXP (x), MPFR_RNDN);
MPFR_ASSERTN (inex2 == 0);
if (MPFR_IS_NEG (y))
{
inex2 = mpfr_sub_ui (tmp, tmp, 1, MPFR_RNDN);
MPFR_ASSERTN (inex2 == 0);
}
mpfr_mul (tmp, tmp, y, MPFR_RNDU);
if (MPFR_IS_NEG (y))
mpfr_nextabove (tmp);
/* tmp doesn't necessarily fit in ebound, but that doesn't matter
since we get the minimum value in such a case. */
ebound = mpfr_get_exp_t (tmp, MPFR_RNDU);
mpfr_clear (tmp);
MPFR_SAVE_EXPO_FREE (expo);
if (MPFR_UNLIKELY (ebound <=
__gmpfr_emin - (rnd_mode == MPFR_RNDN ? 2 : 1)))
{
/* warning: mpfr_underflow rounds away from 0 for MPFR_RNDN */
MPFR_LOG_MSG (("early underflow detection\n", 0));
return mpfr_underflow (z,
rnd_mode == MPFR_RNDN ? MPFR_RNDZ : rnd_mode,
MPFR_SIGN (x) < 0 && is_odd (y) ? -1 : 1);
}
}
/* If y is an integer, we can use mpfr_pow_z (based on multiplications),
but if y is very large (I'm not sure about the best threshold -- VL),
we shouldn't use it, as it can be very slow and take a lot of memory
(and even crash or make other programs crash, as several hundred of
MBs may be necessary). Note that in such a case, either x = +/-2^b
(this case is handled below) or x^y cannot be represented exactly in
any precision supported by MPFR (the general case uses this property).
*/
if (y_is_integer && (MPFR_GET_EXP (y) <= 256))
{
mpz_t zi;
MPFR_LOG_MSG (("special code for y not too large integer\n", 0));
mpz_init (zi);
mpfr_get_z (zi, y, MPFR_RNDN);
inexact = mpfr_pow_z (z, x, zi, rnd_mode);
mpz_clear (zi);
return inexact;
}
/* Special case (+/-2^b)^Y which could be exact. If x is negative, then
necessarily y is a large integer. */
{
mpfr_exp_t b = MPFR_GET_EXP (x) - 1;
MPFR_ASSERTN (b >= LONG_MIN && b <= LONG_MAX); /* FIXME... */
if (mpfr_cmp_si_2exp (x, MPFR_SIGN(x), b) == 0)
{
mpfr_t tmp;
int sgnx = MPFR_SIGN (x);
MPFR_LOG_MSG (("special case (+/-2^b)^Y\n", 0));
/* now x = +/-2^b, so x^y = (+/-1)^y*2^(b*y) is exact whenever b*y is
an integer */
MPFR_SAVE_EXPO_MARK (expo);
mpfr_init2 (tmp, MPFR_PREC (y) + sizeof (long) * CHAR_BIT);
inexact = mpfr_mul_si (tmp, y, b, MPFR_RNDN); /* exact */
MPFR_ASSERTN (inexact == 0);
/* Note: as the exponent range has been extended, an overflow is not
possible (due to basic overflow and underflow checking above, as
the result is ~ 2^tmp), and an underflow is not possible either
because b is an integer (thus either 0 or >= 1). */
MPFR_CLEAR_FLAGS ();
inexact = mpfr_exp2 (z, tmp, rnd_mode);
mpfr_clear (tmp);
if (sgnx < 0 && is_odd (y))
{
mpfr_neg (z, z, rnd_mode);
inexact = -inexact;
}
/* Without the following, the overflows3 test in tpow.c fails. */
MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags);
MPFR_SAVE_EXPO_FREE (expo);
return mpfr_check_range (z, inexact, rnd_mode);
}
}
MPFR_SAVE_EXPO_MARK (expo);
/* Case where |y * log(x)| is very small. Warning: x can be negative, in
that case y is a large integer. */
{
mpfr_t t;
mpfr_exp_t err;
/* We need an upper bound on the exponent of y * log(x). */
mpfr_init2 (t, 16);
if (MPFR_IS_POS(x))
mpfr_log (t, x, cmp_x_1 < 0 ? MPFR_RNDD : MPFR_RNDU); /* away from 0 */
else
{
/* if x < -1, round to +Inf, else round to zero */
mpfr_neg (t, x, (mpfr_cmp_si (x, -1) < 0) ? MPFR_RNDU : MPFR_RNDD);
mpfr_log (t, t, (mpfr_cmp_ui (t, 1) < 0) ? MPFR_RNDD : MPFR_RNDU);
}
MPFR_ASSERTN (MPFR_IS_PURE_FP (t));
err = MPFR_GET_EXP (y) + MPFR_GET_EXP (t);
mpfr_clear (t);
MPFR_CLEAR_FLAGS ();
MPFR_SMALL_INPUT_AFTER_SAVE_EXPO (z, __gmpfr_one, - err, 0,
(MPFR_SIGN (y) > 0) ^ (cmp_x_1 < 0),
rnd_mode, expo, {});
}
/* General case */
inexact = mpfr_pow_general (z, x, y, rnd_mode, y_is_integer, &expo);
MPFR_SAVE_EXPO_FREE (expo);
return mpfr_check_range (z, inexact, rnd_mode);
}
int
mpfr_exp2 (mpfr_ptr y, mpfr_srcptr x, mpfr_rnd_t rnd_mode)
{
int inexact;
long xint;
mpfr_t xfrac;
MPFR_SAVE_EXPO_DECL (expo);
MPFR_LOG_FUNC
(("x[%Pu]=%.*Rg rnd=%d", mpfr_get_prec(x), mpfr_log_prec, x, rnd_mode),
("y[%Pu]=%.*Rg inexact=%d", mpfr_get_prec(y), mpfr_log_prec, y,
inexact));
if (MPFR_UNLIKELY (MPFR_IS_SINGULAR (x)))
{
if (MPFR_IS_NAN (x))
{
MPFR_SET_NAN (y);
MPFR_RET_NAN;
}
else if (MPFR_IS_INF (x))
{
if (MPFR_IS_POS (x))
MPFR_SET_INF (y);
else
MPFR_SET_ZERO (y);
MPFR_SET_POS (y);
MPFR_RET (0);
}
else /* 2^0 = 1 */
{
MPFR_ASSERTD (MPFR_IS_ZERO(x));
return mpfr_set_ui (y, 1, rnd_mode);
}
}
/* since the smallest representable non-zero float is 1/2*2^__gmpfr_emin,
if x < __gmpfr_emin - 1, the result is either 1/2*2^__gmpfr_emin or 0 */
MPFR_ASSERTN (MPFR_EMIN_MIN >= LONG_MIN + 2);
if (MPFR_UNLIKELY (mpfr_cmp_si (x, __gmpfr_emin - 1) < 0))
{
mpfr_rnd_t rnd2 = rnd_mode;
/* in round to nearest mode, round to zero when x <= __gmpfr_emin-2 */
if (rnd_mode == MPFR_RNDN &&
mpfr_cmp_si_2exp (x, __gmpfr_emin - 2, 0) <= 0)
rnd2 = MPFR_RNDZ;
return mpfr_underflow (y, rnd2, 1);
}
MPFR_ASSERTN (MPFR_EMAX_MAX <= LONG_MAX);
if (MPFR_UNLIKELY (mpfr_cmp_si (x, __gmpfr_emax) >= 0))
return mpfr_overflow (y, rnd_mode, 1);
/* We now know that emin - 1 <= x < emax. */
MPFR_SAVE_EXPO_MARK (expo);
/* 2^x = 1 + x*log(2) + O(x^2) for x near zero, and for |x| <= 1 we have
|2^x - 1| <= x < 2^EXP(x). If x > 0 we must round away from 0 (dir=1);
if x < 0 we must round toward 0 (dir=0). */
MPFR_SMALL_INPUT_AFTER_SAVE_EXPO (y, __gmpfr_one, - MPFR_GET_EXP (x), 0,
MPFR_IS_POS (x), rnd_mode, expo, {});
xint = mpfr_get_si (x, MPFR_RNDZ);
mpfr_init2 (xfrac, MPFR_PREC (x));
mpfr_sub_si (xfrac, x, xint, MPFR_RNDN); /* exact */
if (MPFR_IS_ZERO (xfrac))
{
mpfr_set_ui (y, 1, MPFR_RNDN);
inexact = 0;
}
else
{
/* Declaration of the intermediary variable */
mpfr_t t;
/* Declaration of the size variable */
mpfr_prec_t Ny = MPFR_PREC(y); /* target precision */
mpfr_prec_t Nt; /* working precision */
mpfr_exp_t err; /* error */
MPFR_ZIV_DECL (loop);
/* compute the precision of intermediary variable */
/* the optimal number of bits : see algorithms.tex */
Nt = Ny + 5 + MPFR_INT_CEIL_LOG2 (Ny);
/* initialize of intermediary variable */
mpfr_init2 (t, Nt);
/* First computation */
MPFR_ZIV_INIT (loop, Nt);
for (;;)
{
/* compute exp(x*ln(2))*/
mpfr_const_log2 (t, MPFR_RNDU); /* ln(2) */
mpfr_mul (t, xfrac, t, MPFR_RNDU); /* xfrac * ln(2) */
err = Nt - (MPFR_GET_EXP (t) + 2); /* Estimate of the error */
mpfr_exp (t, t, MPFR_RNDN); /* exp(xfrac * ln(2)) */
if (MPFR_LIKELY (MPFR_CAN_ROUND (t, err, Ny, rnd_mode)))
break;
/* Actualisation of the precision */
MPFR_ZIV_NEXT (loop, Nt);
mpfr_set_prec (t, Nt);
}
MPFR_ZIV_FREE (loop);
inexact = mpfr_set (y, t, rnd_mode);
mpfr_clear (t);
}
mpfr_clear (xfrac);
MPFR_CLEAR_FLAGS ();
mpfr_mul_2si (y, y, xint, MPFR_RNDN); /* exact or overflow */
/* Note: We can have an overflow only when t was rounded up to 2. */
MPFR_ASSERTD (MPFR_IS_PURE_FP (y) || inexact > 0);
MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags);
MPFR_SAVE_EXPO_FREE (expo);
return mpfr_check_range (y, inexact, rnd_mode);
}
int
mpfr_cos (mpfr_ptr y, mpfr_srcptr x, mpfr_rnd_t rnd_mode)
{
mpfr_prec_t K0, K, precy, m, k, l;
int inexact, reduce = 0;
mpfr_t r, s, xr, c;
mpfr_exp_t exps, cancel = 0, expx;
MPFR_ZIV_DECL (loop);
MPFR_SAVE_EXPO_DECL (expo);
MPFR_GROUP_DECL (group);
MPFR_LOG_FUNC (
("x[%Pu]=%*.Rg rnd=%d", mpfr_get_prec (x), mpfr_log_prec, x, rnd_mode),
("y[%Pu]=%*.Rg inexact=%d", mpfr_get_prec (y), mpfr_log_prec, y,
inexact));
if (MPFR_UNLIKELY (MPFR_IS_SINGULAR (x)))
{
if (MPFR_IS_NAN (x) || MPFR_IS_INF (x))
{
MPFR_SET_NAN (y);
MPFR_RET_NAN;
}
else
{
MPFR_ASSERTD (MPFR_IS_ZERO (x));
return mpfr_set_ui (y, 1, rnd_mode);
}
}
MPFR_SAVE_EXPO_MARK (expo);
/* cos(x) = 1-x^2/2 + ..., so error < 2^(2*EXP(x)-1) */
expx = MPFR_GET_EXP (x);
MPFR_SMALL_INPUT_AFTER_SAVE_EXPO (y, __gmpfr_one, -2 * expx,
1, 0, rnd_mode, expo, {});
/* Compute initial precision */
precy = MPFR_PREC (y);
if (precy >= MPFR_SINCOS_THRESHOLD)
{
MPFR_SAVE_EXPO_FREE (expo);
return mpfr_cos_fast (y, x, rnd_mode);
}
K0 = __gmpfr_isqrt (precy / 3);
m = precy + 2 * MPFR_INT_CEIL_LOG2 (precy) + 2 * K0;
if (expx >= 3)
{
reduce = 1;
/* As expx + m - 1 will silently be converted into mpfr_prec_t
in the mpfr_init2 call, the assert below may be useful to
avoid undefined behavior. */
MPFR_ASSERTN (expx + m - 1 <= MPFR_PREC_MAX);
mpfr_init2 (c, expx + m - 1);
mpfr_init2 (xr, m);
}
MPFR_GROUP_INIT_2 (group, m, r, s);
MPFR_ZIV_INIT (loop, m);
for (;;)
{
/* If |x| >= 4, first reduce x cmod (2*Pi) into xr, using mpfr_remainder:
let e = EXP(x) >= 3, and m the target precision:
(1) c <- 2*Pi [precision e+m-1, nearest]
(2) xr <- remainder (x, c) [precision m, nearest]
We have |c - 2*Pi| <= 1/2ulp(c) = 2^(3-e-m)
|xr - x - k c| <= 1/2ulp(xr) <= 2^(1-m)
|k| <= |x|/(2*Pi) <= 2^(e-2)
Thus |xr - x - 2kPi| <= |k| |c - 2Pi| + 2^(1-m) <= 2^(2-m).
It follows |cos(xr) - cos(x)| <= 2^(2-m). */
if (reduce)
{
mpfr_const_pi (c, MPFR_RNDN);
mpfr_mul_2ui (c, c, 1, MPFR_RNDN); /* 2Pi */
mpfr_remainder (xr, x, c, MPFR_RNDN);
if (MPFR_IS_ZERO(xr))
goto ziv_next;
/* now |xr| <= 4, thus r <= 16 below */
mpfr_mul (r, xr, xr, MPFR_RNDU); /* err <= 1 ulp */
}
else
mpfr_mul (r, x, x, MPFR_RNDU); /* err <= 1 ulp */
/* now |x| < 4 (or xr if reduce = 1), thus |r| <= 16 */
/* we need |r| < 1/2 for mpfr_cos2_aux, i.e., EXP(r) - 2K <= -1 */
K = K0 + 1 + MAX(0, MPFR_GET_EXP(r)) / 2;
/* since K0 >= 0, if EXP(r) < 0, then K >= 1, thus EXP(r) - 2K <= -3;
otherwise if EXP(r) >= 0, then K >= 1/2 + EXP(r)/2, thus
EXP(r) - 2K <= -1 */
MPFR_SET_EXP (r, MPFR_GET_EXP (r) - 2 * K); /* Can't overflow! */
/* s <- 1 - r/2! + ... + (-1)^l r^l/(2l)! */
l = mpfr_cos2_aux (s, r);
/* l is the error bound in ulps on s */
MPFR_SET_ONE (r);
for (k = 0; k < K; k++)
{
mpfr_sqr (s, s, MPFR_RNDU); /* err <= 2*olderr */
MPFR_SET_EXP (s, MPFR_GET_EXP (s) + 1); /* Can't overflow */
mpfr_sub (s, s, r, MPFR_RNDN); /* err <= 4*olderr */
if (MPFR_IS_ZERO(s))
goto ziv_next;
MPFR_ASSERTD (MPFR_GET_EXP (s) <= 1);
}
/* The absolute error on s is bounded by (2l+1/3)*2^(2K-m)
2l+1/3 <= 2l+1.
If |x| >= 4, we need to add 2^(2-m) for the argument reduction
by 2Pi: if K = 0, this amounts to add 4 to 2l+1/3, i.e., to add
2 to l; if K >= 1, this amounts to add 1 to 2*l+1/3. */
l = 2 * l + 1;
if (reduce)
l += (K == 0) ? 4 : 1;
k = MPFR_INT_CEIL_LOG2 (l) + 2*K;
/* now the error is bounded by 2^(k-m) = 2^(EXP(s)-err) */
exps = MPFR_GET_EXP (s);
if (MPFR_LIKELY (MPFR_CAN_ROUND (s, exps + m - k, precy, rnd_mode)))
break;
if (MPFR_UNLIKELY (exps == 1))
/* s = 1 or -1, and except x=0 which was already checked above,
cos(x) cannot be 1 or -1, so we can round if the error is less
than 2^(-precy) for directed rounding, or 2^(-precy-1) for rounding
to nearest. */
{
if (m > k && (m - k >= precy + (rnd_mode == MPFR_RNDN)))
{
/* If round to nearest or away, result is s = 1 or -1,
otherwise it is round(nexttoward (s, 0)). However in order to
have the inexact flag correctly set below, we set |s| to
1 - 2^(-m) in all cases. */
mpfr_nexttozero (s);
break;
}
}
if (exps < cancel)
{
m += cancel - exps;
cancel = exps;
}
ziv_next:
MPFR_ZIV_NEXT (loop, m);
MPFR_GROUP_REPREC_2 (group, m, r, s);
if (reduce)
{
mpfr_set_prec (xr, m);
mpfr_set_prec (c, expx + m - 1);
}
}
MPFR_ZIV_FREE (loop);
inexact = mpfr_set (y, s, rnd_mode);
MPFR_GROUP_CLEAR (group);
if (reduce)
{
mpfr_clear (xr);
mpfr_clear (c);
}
MPFR_SAVE_EXPO_FREE (expo);
return mpfr_check_range (y, inexact, rnd_mode);
}
