コード例 #1
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmSuspendCnf_PlmnSelection_WaitTdSuspendCnfBackW(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg       = VOS_NULL_PTR;
    RRMM_SUSPEND_CNF_ST                *pstRrmmSuspendCnf = VOS_NULL_PTR;

    MSG_HEADER_STRU                    *pstMsgHeader      = VOS_NULL_PTR;
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstBufferEntryMsg = VOS_NULL_PTR;

    /* 获得当前缓存的缓冲区地址 */
    pstBufferEntryMsg = NAS_UTRANCTRL_GetBufferUtranSndMmcMsgAddr();

    pstRrmmSuspendCnf  = (RRMM_SUSPEND_CNF_ST*)pstMsg;

    if (MMC_AS_SUSPEND_FAILURE == pstRrmmSuspendCnf->ucResult)
    {
        /* 单板复位 */
        NAS_MML_SoftReBoot();
        return VOS_TRUE;
    }

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF);

    /* 取当前缓存的系统消息 */
    pstEntryMsg = NAS_UTRANCTRL_GetCurrEntryMsgAddr();

    /* 取得当前缓存消息的头 */
    pstMsgHeader = (MSG_HEADER_STRU *)pstEntryMsg->aucEntryMsgBuffer;

    /* 如果当前的入口消息为定时器超时,则需要构造搜网回复失败消息 */
    if ( VOS_PID_TIMER == pstMsgHeader->ulSenderPid )
    {
        /* 构造指定搜网回复失败消息到内存的缓存区域 */
        NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                WUEPS_PID_MMC,
                (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

        /* 保存构造指定搜网回复失败消息事件类型 */
        pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );
    }
    else
    {
        /* 取缓存的状态机搜网回复失败消息给MMC模块 */
        NAS_UTRANCTRL_SaveBufferUtranSndMmcMsg(pstEntryMsg->ulEventType,
                                               (struct MsgCB *)pstEntryMsg->aucEntryMsgBuffer);

    }

    /* 设置需要替换入口消息标记 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* 切换到MAIN状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 消息处理完成继续进入MMC状态机处理 */
    return VOS_FALSE;
}
コード例 #2
0
VOS_UINT32 NAS_UTRANCTRL_RcvWasRrMmRelInd_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 如果当前UTRANCTRL模的等搜网回复时状态定时器运行,则停止定时器 */
    if ( NAS_MMC_TIMER_STATUS_RUNING != NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF))
    {
        /* 当前消息进入后续MMC状态机处理 */
        return VOS_FALSE;
    }

    /* WAS搜网时接入层复位,搜TD模 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF);

    if ( NAS_UTRANCTRL_UTRAN_SWITCH_MODE_AUTO == NAS_UTRANCTRL_GetCurUtranSwitchMode() )
    {
        /* 切换到适配模块的选网状态机进行处理 */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_PLMN_SELECTION);

        /* 当前消息进入适配层选网状态机处理 */
        return VOS_TRUE;
    }

    /* 当前消息进入后续MMC状态机处理 */
    return VOS_FALSE;
}
コード例 #3
0
VOS_UINT32 NAS_UTRANCTRL_RcvTdSysCfgCnf_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_SYS_CFG_CNF_STRU              *pstSysCfgCnf;

    pstSysCfgCnf = (RRMM_SYS_CFG_CNF_STRU *)pstMsg;

    /* 如果当前UTRANCTRL模的等开机回复时状态定时器不运行认为异常 */
    if ( NAS_MMC_TIMER_STATUS_RUNING != NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_TD_SYSCFG_CNF))
    {
        /* 异常打印 */
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTdSysCfgCnf_Main: Unexpected Plmnsrch msg!");

        /* 丢弃该异常消息 */
        return VOS_TRUE;
    }

    /* 停止MMC通过UTRANCTRL模块给UTRAN模发送SYSCFG设置消息时候起的定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_SYSCFG_CNF);

    if ( RRMM_SYS_CFG_RESULT_FAILURE == pstSysCfgCnf->ulResult)
    {
        /* 若syscfg设置失败,则直接进MMC状态机进行处理 */
        return VOS_FALSE;
    }

    /* 切换到适配模块的SYSCFG状态机进行处理 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_SYSCFG);

    /* Td的SYSCFG回复消息在适配模块的SYSCFG状态机进行处理  */
    return VOS_TRUE;
}
コード例 #4
0
VOS_UINT32 NAS_UTRANCTRL_RcvUserReqMsg_PlmnSelection_WaitTdPlmnSearchCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 记录状态机打断标记 */
    NAS_UTRANCTRL_SetAbortFlg_PlmnSelection(VOS_TRUE);

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_SEARCH_CNF);

    /* 缓存当前用户请求消息 */
    NAS_UTRANCTRL_SaveCacheMsgInMsgQueue(ulEventType, pstMsg);

    /* 向TDRRC发送停止搜网请求 */
    NAS_UTRANCTRL_SndGuAsPlmnStopReq(TPS_PID_RRC);

    /* 迁移状态到等到TDRRC停止搜网回复 */
    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_TD_PLMN_STOP_CNF);

    /* 启动保护定时器 */
    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_STOP_CNF, TI_NAS_UTRANCTRL_WAIT_TD_PLMN_STOP_CNF_LEN);

    /* 消息处理完成不需继续处理 */
    return VOS_TRUE;
}
コード例 #5
0
VOS_UINT32 NAS_UTRANCTRL_RcvTdStartCnf_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_START_CNF_STRU                *pstRrStartCnfMsg;

    pstRrStartCnfMsg = (RRMM_START_CNF_STRU *)pstMsg;

    /* 如果当前UTRANCTRL模的等开机回复时状态定时器不运行认为异常 */
    if ( NAS_MMC_TIMER_STATUS_RUNING != NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_TD_START_CNF))
    {
        /* 异常打印 */
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTdStartCnf_Main: Unexpected Plmnsrch msg!");

        /* 丢弃该异常消息 */
        return VOS_TRUE;
    }

    /* 停止MMC通过UTRANCTRL模块给UTRAN模发送开机消息时候起的定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_START_CNF);

    if (MMC_START_FAILURE == pstRrStartCnfMsg->ulResult)
    {
        /* 若UTRAN模块开机失败,则直接进MMC状态机进行处理 */
        return VOS_FALSE;
    }

    /* 切换到适配模块的开机状态机进行处理 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_SWITCH_ON);

    /* TD的开机回复消息在适配模块的开机状态机进行处理  */
    return VOS_TRUE;
}
コード例 #6
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmPlmnStopCnf_PlmnSelection_WaitTdPlmnStopCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstBufferEntryMsg = VOS_NULL_PTR;

    MSG_HEADER_STRU                    *pstMsgHeader      = VOS_NULL_PTR;
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg       = VOS_NULL_PTR;

    /* 取当前缓存的系统消息 */
    pstEntryMsg = NAS_UTRANCTRL_GetCurrEntryMsgAddr();

    /* 取得当前缓存消息的头 */
    pstMsgHeader = (MSG_HEADER_STRU *)pstEntryMsg->aucEntryMsgBuffer;


    /* 获得当前缓存的缓冲区地址 */
    pstBufferEntryMsg = NAS_UTRANCTRL_GetBufferUtranSndMmcMsgAddr();

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_STOP_CNF);


    /* 中国网络标记存在则退出当前状态机 */
    if ( (VOS_TRUE == NAS_UTRANCTRL_GetSearchedSpecTdMccFlg())
            || ( (WUEPS_PID_MMC                  == pstMsgHeader->ulSenderPid)
                 && (MMCMMC_INTER_SKIP_SEARCH_W_IND == pstMsgHeader->ulMsgName) ) )
    {

        /* 构造指定搜网回复失败消息到内存的缓存区域 */
        NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                WUEPS_PID_MMC,
                (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

        /* 保存构造指定搜网回复失败消息事件类型 */
        pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );

        /* 设置需要替换入口消息标记 */
        NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

        /* 状态机切换到MAIN */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

        /* 消息处理完成继续进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 此时需要回到W下,向TDRRC发送挂起请求 */
    NAS_UTRANCTRL_SndGuAsSuspendReq(TPS_PID_RRC);

    /* 迁移状态到等到TDRRC挂起回复 */
    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_TD_SUSPEND_CNF_BACK_W);

    /* 启动保护定时器 */
    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF_LEN);

    /* 消息处理完成不需继续处理 */
    return VOS_TRUE;
}
コード例 #7
0
VOS_VOID NAS_UTRANCTRL_ProcSlaveModeCnf_ModeChange(
    NAS_UTRANCTRL_MASTER_MODE_ENUM_UINT8                    enMasterMode
)
{
    VOS_UINT8                           ucWaitSlaveModeUtranModeCnfFlg;

    ucWaitSlaveModeUtranModeCnfFlg = NAS_UTRANCTRL_GetWaitSlaveModeUtranModeCnfFlg_ModeChange();

    if (NAS_UTRANCTRL_WAIT_UTRAN_MODE_CNF_NULL != ucWaitSlaveModeUtranModeCnfFlg)
    {
        return;
    }

    /* 如果已经收齐三个从模的回复,停等待从模回复定时器,给主模发模式变更请求,
       启等待主模回复定时器,迁到等待主模回复状态 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_SLAVEMODE_UTRAN_MODE_CNF);

    NAS_UTRANCTRL_SndMasterModeUtranModeReq_ModeChange(enMasterMode);

    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_MODE_CHANGE_STA_WAIT_MASTERMODE_CNF);

    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_MASTERMODE_UTRAN_MODE_CNF, TI_NAS_UTRANCTRL_WAIT_MASTERMODE_UTRAN_MODE_CNF_LEN);

    return;
}
コード例 #8
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmPlmnSearchCnf_PlmnSelection_WaitTdPlmnSearchCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_PLMN_SEARCH_CNF_STRU          *pstSrchCnfMsg = VOS_NULL_PTR;

    pstSrchCnfMsg = (RRMM_PLMN_SEARCH_CNF_STRU *)pstMsg;

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_SEARCH_CNF);

    /* 如果搜网成功 */
    if (RRC_PLMN_SEARCH_RLT_SPEC == pstSrchCnfMsg->ulSearchRlt)
    {
        /* 状态机切换到MAIN */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

        /* 进MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 根据搜网列表更新中国网络标记 */
    NAS_UTRANCTRL_UpdateSearchedSpecTdMccFLg(NAS_UTRANCTRL_GetSpecTdMccListNum(),
            NAS_UTRANCTRL_GetSpecTdMccList(),
            &(pstSrchCnfMsg->PlmnIdList));

    /* 根据中国网络标记设置utran工作模式 */
    if (VOS_TRUE == NAS_UTRANCTRL_GetSearchedSpecTdMccFlg())
    {
        NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_TDD);
    }

    /* 根据当前工作模式为FDD则需要回到W下 */
    if (NAS_UTRANCTRL_UTRAN_MODE_FDD   == NAS_UTRANCTRL_GetCurrUtranMode())
    {
        /* 挂起TD */
        NAS_UTRANCTRL_SndGuAsSuspendReq(TPS_PID_RRC);

        /* 迁移状态到等待回W时TD的挂起回复状态 */
        NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_TD_SUSPEND_CNF_BACK_W);

        /* 启动保护定时器 */
        NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF_LEN);

        /* 消息处理完成不需继续处理 */
        return VOS_TRUE;
    }

    /* 状态机切换到MAIN */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 消息处理完成继续进入MMC状态机处理 */
    return VOS_FALSE;
}
コード例 #9
0
VOS_UINT32 NAS_UTRANCTRL_RcvWasPowerOffCnf_PowerOff_WaitWasPowerOffCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* UTRANCTRL停止等待WAS回复定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_POWER_OFF_CNF);

    /* UTRANCTRL状态机回到MAIN状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 进入后续MMC状态机处理 */
    return VOS_FALSE;
}
コード例 #10
0
VOS_UINT32  NAS_UTRANCTRL_RcvWasStartCnf_SwitchOn_WaitWasStartCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* UTRANCTRL停止等待WAS回复定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_START_CNF);

    /* 适配模块状态机回到main状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 进入后续开机状态机处理 */
    return VOS_FALSE;
}
コード例 #11
0
VOS_UINT32 NAS_UTRANCTRL_RcvTdPowerOffCnf_PowerOff_WaitTdPowerOffCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* UTRANCTRL停止等待TD回复定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_POWER_OFF_CNF);

    /* 回到main状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 当前消息进入后续MMC状态机处理 */
    return VOS_FALSE;
}
コード例 #12
0
VOS_UINT32 NAS_UTRANCTRL_RcvTdSysCfgCnf_SysCfg_WaitTdSysCfgCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* UTRANCTRL停止等待WAS回复定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_SYSCFG_CNF);

    /* 适配模块状态机回到main状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 进入后续开机状态机处理 */
    return VOS_FALSE;
}
コード例 #13
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmRelInd_PlmnSelection_WaitWasPlmnStopCnfSearchTD(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstBufferEntryMsg = VOS_NULL_PTR;

    /* 获得当前缓存的缓冲区地址 */
    pstBufferEntryMsg = NAS_UTRANCTRL_GetBufferUtranSndMmcMsgAddr();

    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvRrmmRelInd_PlmnSelection_WaitWasPlmnStopCnfSearchTD: ENTERED");

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_STOP_CNF);

    if ( VOS_TRUE == NAS_UTRANCTRL_GetAbortFlg_PlmnSelection())
    {
        /* 构造指定搜网回复失败消息到内存的缓存区域 */
        NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                WUEPS_PID_MMC,
                (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

        /* 保存构造指定搜网回复失败消息事件类型 */
        pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );

        /* 设置需要替换入口消息标记 */
        NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

        /* 切换到MAIN状态机 */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

        /* 将搜网失败消息发给MMC处理 */
        return VOS_FALSE;
    }

    /* W下搜网失败需要在TD下继续搜网 挂起WAS */
    NAS_UTRANCTRL_SndGuAsSuspendReq(WUEPS_PID_WRR);

    /* 迁移状态到等到WAS挂起回复 */
    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_WAS_SUSPEND_CNF);

    /* 启动定时器 */
    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF_LEN);

    /* 消息处理完成不需继续进入MMC状态机处理 */
    return VOS_TRUE;

}
コード例 #14
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmPlmnStopCnf_PlmnSelection_WaitTdPlmnStopCnfSearchW(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstBufferEntryMsg = VOS_NULL_PTR;

    /* 获得当前缓存的缓冲区地址 */
    pstBufferEntryMsg = NAS_UTRANCTRL_GetBufferUtranSndMmcMsgAddr();

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_STOP_CNF);

    /* 如果当前存在打断,则直接退出选网状态机 */
    if ( VOS_TRUE == NAS_UTRANCTRL_GetAbortFlg_PlmnSelection())
    {
        /* 构造指定搜网回复失败消息到内存的缓存区域 */
        NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                WUEPS_PID_MMC,
                (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

        /* 保存构造指定搜网回复失败消息事件类型 */
        pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );

        /* 设置需要替换入口消息标记 */
        NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

        /* 切换到MAIN状态机 */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

        /* 消息处理完成继续进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 如果当前不存在打断,当前需要继续挂起当前模进行搜网 */
    NAS_UTRANCTRL_SndGuAsSuspendReq(TPS_PID_RRC);

    /* 迁移状态到等到TD挂起回复 */
    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_TD_SUSPEND_CNF);

    /* 启动定时器 */
    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_TD_SUSPEND_CNF_LEN);

    /* 消息处理完成不需继续处理 */
    return VOS_TRUE;
}
コード例 #15
0
VOS_UINT32 NAS_UTRANCTRL_RcvInterAbortUtranCtrlPlmnSearchReq_PlmnSelection_WaitWasPlmnSearchCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF);

    /* 更新utran mode为fdd,utranctrl 搜网状态机退出,消息进mmc继续处理,通知接入层打断由mmc处理 */
    NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_FDD);

    /* 通知mmc MMCMMC_INTER_ABORT_UTRAN_CTRL_PLMN_SEARCH_CNF*/
    NAS_MMC_SndInterAbortUtranCtrlPlmnSearchCnfMsg();

    /* 状态机切换到MAIN */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    return VOS_TRUE;
}
コード例 #16
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmPlmnStopCnf_PlmnSelection_WaitWasPlmnStopCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_STOP_CNF);

    /* 此时需要回到TD下,向WAS发送挂起请求 */
    NAS_UTRANCTRL_SndGuAsSuspendReq(WUEPS_PID_WRR);

    /* 迁移状态到等到was挂起回复 */
    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_WAS_SUSPEND_CNF_BACK_TD);

    /* 启动保护定时器 */
    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF_LEN);

    /* 消息处理完成不需继续处理 */
    return VOS_TRUE;
}
コード例 #17
0
VOS_UINT32 NAS_UTRANCTRL_RcvInterAbortUtranCtrlPlmnSearchReq_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{

    /* 如果当前UTRANCTRL模的等指定搜网回复时状态定时器运行则停止定时器 */
    if (NAS_MMC_TIMER_STATUS_RUNING == NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF))
    {
        NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF);
    }

    /* 更新utran mode为fdd,utranctrl 搜网状态机退出,消息进mmc继续处理,通知接入层打断由mmc处理 */
    NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_FDD);

    /* 通知mmc MMCMMC_INTER_ABORT_UTRAN_CTRL_PLMN_SEARCH_CNF*/
    NAS_MMC_SndInterAbortUtranCtrlPlmnSearchCnfMsg();

    return VOS_TRUE;

}
コード例 #18
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmRelInd_PlmnSelection_WaitWasPlmnSearchCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 异常打印 */
    NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvRrmmRelInd_PlmnSelection_WaitWasPlmnSearchCnf: ENTERED");

    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF);

    /* 当前未搜到中国的网络,则认为仍然在TD下,模式保持不变 */
    NAS_UTRANCTRL_SndGuAsSuspendReq(WUEPS_PID_WRR);

    /* 迁移状态到等待回TD时W的挂起回复状态 */
    NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_WAS_SUSPEND_CNF_BACK_TD);

    /* 启动保护定时器 */
    NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF_LEN);

    /* 消息处理完成不需继续处理 */
    return VOS_TRUE;
}
コード例 #19
0
VOS_UINT32 NAS_UTRANCTRL_RcvMasterModeCnf_ModeChange_WaitMasterModeCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU                           *pstEntryMsg;

    /* 停等待主模回复定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_MASTERMODE_UTRAN_MODE_CNF);

    /* 取当前缓存的系统消息 */
    pstEntryMsg = NAS_UTRANCTRL_GetCurrEntryMsgAddr();
    NAS_UTRANCTRL_SaveBufferUtranSndMmcMsg( pstEntryMsg->ulEventType,
                                     (struct MsgCB *)pstEntryMsg->aucEntryMsgBuffer);

    /* 设置缓存消息有效标志 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* 退出MODE CHANGE状态机,切换到MAIN状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    return VOS_FALSE;
}
コード例 #20
0
VOS_UINT32 NAS_UTRANCTRL_RcvTdPowerOffCnf_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    /* 如果当前UTRANCTRL模的等开机回复时状态定时器不运行认为异常 */
    if ( NAS_MMC_TIMER_STATUS_RUNING != NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_TD_POWER_OFF_CNF))
    {
        /* 异常打印 */
        NAS_WARNING_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTdPowerOffCnf_Main: Unexpected Plmnsrch msg!");

        /* 丢弃该异常消息 */
        return VOS_TRUE;
    }

    /* 停止MMC通过UTRANCTRL模块给UTRAN模发送关机消息时候起的定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_POWER_OFF_CNF);

    /* 切换到适配模块的关机状态机进行处理 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_POWER_OFF);

    /* td的关机回复消息在适配模块的关机状态机进行处理  */
    return VOS_TRUE;
}
コード例 #21
0
VOS_UINT32 NAS_UTRANCTRL_RcvTdPlmnSrchCnf_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_PLMN_SEARCH_CNF_STRU          *pstSrchCnfMsg = VOS_NULL_PTR;

    VOS_UINT32                          ulIsOtherModemPlmnInTdMccList;
    NAS_MML_PLMN_ID_STRU               *pstOtherModemPlmnId = VOS_NULL_PTR;
    NAS_UTRANCTRL_UTRAN_MODE_ENUM_UINT8 enUtranMode;

    enUtranMode     = NAS_UTRANCTRL_GetCurrUtranMode();

    pstSrchCnfMsg   = (RRMM_PLMN_SEARCH_CNF_STRU *)pstMsg;

    /* 如果是LIST搜网的结果回复则直接透传到MMC状态机处理 */
    /* 降圈复杂度 */
    if (VOS_TRUE == NAS_MML_IsPlmnListSrchRslt(pstSrchCnfMsg->ulSearchRlt))
    {
        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 如果当前UTRANCTRL模的等指定搜网回复时状态定时器运行则停止定时器 */
    if (NAS_MMC_TIMER_STATUS_RUNING == NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_SEARCH_CNF))
    {
        NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_SEARCH_CNF);
    }

    /* 非自动切换模式,消息直接透传到MMC状态机处理 */
    if (NAS_UTRANCTRL_UTRAN_SWITCH_MODE_AUTO != NAS_UTRANCTRL_GetCurUtranSwitchMode())
    {
        /* 清除缓存的搜网请求消息 */
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 自动切换模式下如果是快速指定搜网或指定搜网成功直接透传快速指定搜网回复到MMC状态机处理 */
    if ((RRC_PLMN_SEARCH_SPEC_FAST == NAS_UTRANCTRL_GetBufferedPlmnSearchReqType())
     || (RRC_PLMN_SEARCH_RLT_SPEC  == pstSrchCnfMsg->ulSearchRlt))
    {
        /* 清除缓存的搜网请求消息 */
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 自动切换模式下,CSFB标志存在时,并且当前是FDD模式,不再搜TD */
    if ((VOS_TRUE                       == NAS_MML_IsCsfbServiceStatusExist())
     && (NAS_UTRANCTRL_UTRAN_MODE_TDD   == enUtranMode))
    {
        /* 清除缓存的搜网请求消息 */
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 根据搜网列表更新中国网络标记 */
    NAS_UTRANCTRL_UpdateSearchedSpecTdMccFLg(NAS_UTRANCTRL_GetSpecTdMccListNum(),
                                             NAS_UTRANCTRL_GetSpecTdMccList(),
                                             &(pstSrchCnfMsg->PlmnIdList));

    /* 根据中国网络标记设置utran工作模式 */
    if (VOS_TRUE == NAS_UTRANCTRL_GetSearchedSpecTdMccFlg())
    {
        NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_TDD);

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    pstOtherModemPlmnId = NAS_MMC_GetOtherModemPlmnId();
    ulIsOtherModemPlmnInTdMccList = NAS_MML_IsMccInDestMccList(pstOtherModemPlmnId->ulMcc,
                                                NAS_UTRANCTRL_GetSpecTdMccListNum(),
                                                NAS_UTRANCTRL_GetSpecTdMccList());

    if ((VOS_TRUE == NAS_MMC_GetUtranSkipWPlmnSearchFlag())
     && (VOS_TRUE == ulIsOtherModemPlmnInTdMccList))
    {
        /* 如果副卡已驻留中国网络跳过搜w网络,清除缓存的搜网请求消息 */
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 切换到适配模块的选网状态机进行处理 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_PLMN_SELECTION);

    /* tdrrc的搜网回复消息在适配模块的选网状态机进行处理 */
    return VOS_TRUE;
}
コード例 #22
0
VOS_UINT32 NAS_UTRANCTRL_RcvWasPlmnSrchCnf_Main(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_PLMN_SEARCH_CNF_STRU          *pstSrchCnfMsg;
    NAS_UTRANCTRL_UTRAN_MODE_ENUM_UINT8 enUtranMode;

    VOS_UINT32                          ulExistHongKongMcc;
    NAS_MMC_DPLMN_NPLMN_CFG_INFO_STRU  *pstDPlmnNPlmnInfo = VOS_NULL_PTR;
    VOS_UINT8                           ucSwitchOnPlmnSearchFlag;

    ulExistHongKongMcc = VOS_FALSE;
    pstDPlmnNPlmnInfo  = NAS_MMC_GetDPlmnNPlmnCfgInfo();
    ucSwitchOnPlmnSearchFlag = NAS_UTRANCTRL_GetSwithOnPlmnSearchFlag();

    enUtranMode     = NAS_UTRANCTRL_GetCurrUtranMode();

    pstSrchCnfMsg   = (RRMM_PLMN_SEARCH_CNF_STRU *)pstMsg;



    /* 如果是LIST搜网的结果回复则直接透传到MMC状态机处理 */
    /* 降圈复杂度 */
    if (VOS_TRUE == NAS_MML_IsPlmnListSrchRslt(pstSrchCnfMsg->ulSearchRlt))
    {
    
        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 如果当前UTRANCTRL模的等指定搜网回复时状态定时器运行则停止定时器 */
    if (NAS_MMC_TIMER_STATUS_RUNING == NAS_UTRANCTRL_GetTimerStatus(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF))
    {
        NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF);
    }

    /* 非自动切换模式,消息直接透传到MMC状态机处理 */
    if (NAS_UTRANCTRL_UTRAN_SWITCH_MODE_AUTO != NAS_UTRANCTRL_GetCurUtranSwitchMode())
    {
        /* 清除缓存的搜网请求消息 */
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }


    /* 自动切换模式下如果是搜网失败NORF/快速指定搜网或指定搜网成功直接透传快速指定搜网回复到MMC状态机处理 */
    if ((RRC_PLMN_SEARCH_SPEC_FAST      == NAS_UTRANCTRL_GetBufferedPlmnSearchReqType())
     || (RRC_PLMN_SEARCH_RLT_SPEC       == pstSrchCnfMsg->ulSearchRlt)
     || (RRC_PLMN_SEARCH_RLT_SPEC_NO_RF == pstSrchCnfMsg->ulSearchRlt))
    {

        /* 清除缓存的搜网请求消息 */
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 自动切换模式下,CSFB标志存在时,并且当前是FDD模式,不再搜TD */
    if ((VOS_TRUE                       == NAS_MML_IsCsfbServiceStatusExist())
     && (NAS_UTRANCTRL_UTRAN_MODE_FDD   == enUtranMode))
    {
        /* 清除缓存的搜网请求消息 */
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 指定搜网失败根据搜网列表更新中国网络标记 */
    NAS_UTRANCTRL_UpdateSearchedSpecTdMccFLg(NAS_UTRANCTRL_GetSpecTdMccListNum(),
                                             NAS_UTRANCTRL_GetSpecTdMccList(),
                                             &(pstSrchCnfMsg->PlmnIdList));

    /* 根据中国网络标记设置utran工作模式 */
    if (VOS_TRUE == NAS_UTRANCTRL_GetSearchedSpecTdMccFlg())
    {
        NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_TDD);
    }


    ulExistHongKongMcc = NAS_UTRANCTRL_IsSpecPlmnMccInGuRrcPlmnIdList(NAS_UTRANCTRL_HONGKONG_MCC, &(pstSrchCnfMsg->PlmnIdList));

    if ((NAS_UTRANCTRL_UTRAN_MODE_FDD == NAS_UTRANCTRL_GetCurrUtranMode())
     && (VOS_FALSE == ulExistHongKongMcc)
     && (VOS_TRUE == pstDPlmnNPlmnInfo->ucActiveFlg)
     && (VOS_TRUE == ucSwitchOnPlmnSearchFlag)
     && ((pstSrchCnfMsg->PlmnIdList.ulHighPlmnNum != 0)
      || (pstSrchCnfMsg->PlmnIdList.ulLowPlmnNum != 0)))
    {
        /* 开机搜网场景,如果was搜网结果中没有一个网络mcc在tds mcc列表中且不包括香港网络,且高低质量网络个数不全为0,
           则跳过tds搜网,清除缓存*/
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();

        /* 进入MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 切换到适配模块的选网状态机进行处理 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_PLMN_SELECTION);

    /* was的搜网回复消息在适配模块的选网状态机进行处理  */
    return VOS_TRUE;
}
コード例 #23
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmPlmnSearchCnf_PlmnSelection_WaitWasPlmnSearchCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    RRMM_PLMN_SEARCH_CNF_STRU          *pstSrchCnfMsg;

    pstSrchCnfMsg = (RRMM_PLMN_SEARCH_CNF_STRU *)pstMsg;

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_PLMN_SEARCH_CNF);

    /* 如果搜网成功 */
    if (RRC_PLMN_SEARCH_RLT_SPEC == pstSrchCnfMsg->ulSearchRlt)
    {
        /* 状态机切换到MAIN */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

        /* 进MMC状态机处理 */
        return VOS_FALSE;
    }


    /* 如果搜网失败,原因为NO RF,则直接进MMC处理,设置当前为FDD模式 */
    if (RRC_PLMN_SEARCH_RLT_SPEC_NO_RF == pstSrchCnfMsg->ulSearchRlt)
    {
        NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_FDD);

        /* 状态机切换到MAIN */
        NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

        /* 进MMC状态机处理 */
        return VOS_FALSE;
    }

    /* 根据搜网列表更新中国网络标记 */
    NAS_UTRANCTRL_UpdateSearchedSpecTdMccFLg(NAS_UTRANCTRL_GetSpecTdMccListNum(),
            NAS_UTRANCTRL_GetSpecTdMccList(),
            &(pstSrchCnfMsg->PlmnIdList));

    /* 根据中国网络标记设置utran工作模式 */
    if (VOS_TRUE == NAS_UTRANCTRL_GetSearchedSpecTdMccFlg())
    {
        NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_TDD);
    }
    else if ((0 != pstSrchCnfMsg->PlmnIdList.ulHighPlmnNum)
             || (0 != pstSrchCnfMsg->PlmnIdList.ulLowPlmnNum))
    {
        /* 未搜到中国网络并且W携带非空列表,更新工作模式为FDD */
        NAS_UTRANCTRL_SetCurrUtranMode(NAS_UTRANCTRL_UTRAN_MODE_FDD);
    }
    else
    {
        /* W携带空列表不修改工作模式 */
    }

    /* 根据当前工作模式为TDD则需要回到TD下 */
    if (NAS_UTRANCTRL_UTRAN_MODE_TDD   == NAS_UTRANCTRL_GetCurrUtranMode())
    {
        NAS_UTRANCTRL_SndGuAsSuspendReq(WUEPS_PID_WRR);

        /* 迁移状态到等待回TD时W的挂起回复状态 */
        NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_WAS_SUSPEND_CNF_BACK_TD);

        /* 启动保护定时器 */
        NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF, TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF_LEN);

        /* 消息处理完成不需继续处理 */
        return VOS_TRUE;
    }

    /* 状态机切换到MAIN */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 消息处理完成继续进入MMC状态机处理 */
    return VOS_FALSE;
}
コード例 #24
0
VOS_UINT32 NAS_UTRANCTRL_RcvRrmmSuspendCnf_PlmnSelection_WaitWasSuspendCnf(
    VOS_UINT32                          ulEventType,
    struct MsgCB                       *pstMsg
)
{
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstEntryMsg       = VOS_NULL_PTR;
    RRMM_SUSPEND_CNF_ST                *pstRrmmSuspendCnf = VOS_NULL_PTR;

    MSG_HEADER_STRU                    *pstMsgHeader      = VOS_NULL_PTR;
    NAS_UTRANCTRL_ENTRY_MSG_STRU       *pstBufferEntryMsg = VOS_NULL_PTR;

    /* 获得当前缓存的缓冲区地址 */
    pstBufferEntryMsg = NAS_UTRANCTRL_GetBufferUtranSndMmcMsgAddr();

    pstRrmmSuspendCnf  = (RRMM_SUSPEND_CNF_ST*)pstMsg;

    if (MMC_AS_SUSPEND_FAILURE == pstRrmmSuspendCnf->ucResult)
    {
        /* 单板复位 */
        NAS_MML_SoftReBoot();
        return VOS_TRUE;
    }

    /* 停止保护定时器 */
    NAS_UTRANCTRL_StopTimer(TI_NAS_UTRANCTRL_WAIT_WAS_SUSPEND_CNF);

    /* 状态机打断标记不存在 */
    if (VOS_FALSE == NAS_UTRANCTRL_GetAbortFlg_PlmnSelection())
    {
        /* 向TDRRC发送指定搜网请求 */
        NAS_UTRANCTRL_SndGuAsSpecPlmnSearchReq(TPS_PID_RRC);

        /* 迁移状态到等到TDRRC搜网回复 */
        NAS_UTRANCTRL_FSM_SetCurrState(NAS_UTRANCTRL_PLMN_SELECTION_STA_WAIT_TD_PLMN_SEARCH_CNF);

        /* 启动定时器 */
        NAS_UTRANCTRL_StartTimer(TI_NAS_UTRANCTRL_WAIT_TD_PLMN_SEARCH_CNF, TI_NAS_UTRANCTRL_WAIT_TD_PLMN_SEARCH_CNF_LEN);

        /* 消息处理完成不需继续进入MMC状态机处理 */
        return VOS_TRUE;
    }

    /* 取当前缓存的系统消息 */
    pstEntryMsg = NAS_UTRANCTRL_GetCurrEntryMsgAddr();

    /* 取得当前缓存消息的头 */
    pstMsgHeader = (MSG_HEADER_STRU *)pstEntryMsg->aucEntryMsgBuffer;


    /* 如果当前的入口消息为定时器超时,或者MMC发送的内部SKIP 搜索W消息,则需要构造搜网回复失败消息 */
    if ( (VOS_PID_TIMER == pstMsgHeader->ulSenderPid)
            || ( (WUEPS_PID_MMC                  == pstMsgHeader->ulSenderPid)
                 && (MMCMMC_INTER_SKIP_SEARCH_W_IND == pstMsgHeader->ulMsgName) ) )
    {

        /* 构造指定搜网回复失败消息到内存的缓存区域 */
        NAS_UTRANCTRL_BuildRrMmPlmnSearchCnfFailMsg(WUEPS_PID_WRR,
                WUEPS_PID_MMC,
                (RRMM_PLMN_SEARCH_CNF_STRU *)pstBufferEntryMsg->aucEntryMsgBuffer);

        /* 保存构造指定搜网回复失败消息事件类型 */
        pstBufferEntryMsg->ulEventType = NAS_UTRANCTRL_GetMsgEventType( (struct MsgCB *)pstBufferEntryMsg->aucEntryMsgBuffer );
    }
    else
    {
        /* 取缓存的状态机搜网回复失败消息给MMC模块 */
        NAS_UTRANCTRL_SaveBufferUtranSndMmcMsg(pstEntryMsg->ulEventType,
                                               (struct MsgCB *)pstEntryMsg->aucEntryMsgBuffer);

    }

    /* 设置需要替换入口消息标记 */
    NAS_UTRANCTRL_SetReplaceMmcMsgFlg(VOS_TRUE);

    /* 切换到MAIN状态机 */
    NAS_UTRANCTRL_SwitchCurrFsmCtx(NAS_UTRANCTRL_FSM_MAIN);

    /* 消息处理完成继续进入MMC状态机处理 */
    return VOS_FALSE;
}
コード例 #25
0
VOS_UINT32 NAS_UTRANCTRL_ProcessMmcMsg(
    struct MsgCB                       *pstMsg
)
{
    VOS_UINT32                          ulEventType;
    VOS_UINT32                          ulRslt;
    MSG_HEADER_STRU                    *pstMsgHeader;
    REL_TIMER_MSG                      *pRcvTimerMsg;
    NAS_UTRANCTRL_FSM_ID_ENUM_UINT32    enPreFsmId;

    pstMsgHeader = (MSG_HEADER_STRU *)pstMsg;

    /* 取得当前消息的事件类型 */
    ulEventType = NAS_UTRANCTRL_GetMsgEventType(pstMsg);

    /* UTRANCTRL 模块的定时器需要在超时时统一停止定时器,方便勾出SDT消息 */
    if (VOS_PID_TIMER == pstMsgHeader->ulSenderPid)
    {
        pRcvTimerMsg = (REL_TIMER_MSG *)pstMsg;

        /* UTRANCTRL的定时器超时则这里进行停止,MMC的定时器在MMC模块停止 */
        if (pRcvTimerMsg->ulName >= NAS_UTRANCTRL_TIMER_ID_START_INDEX)
        {
            NAS_UTRANCTRL_StopTimer((NAS_MMC_TIMER_ID_ENUM_UINT16)(pRcvTimerMsg->ulName));
        }
    }

#if defined(__PC_TRACE_RECUR__)
    /* 无条件处理回放消息 */
    if (NAS_UTRANCTRL_OM_MSG_LOG_RUNNING_CONTEXT_FOR_PC_REPLAY == pstMsgHeader->ulMsgName)
    {
        NAS_UTRANCTRL_RestoreContextData_Main(ulEventType, pstMsg);
        return VOS_TRUE;
    }
#endif


    /* 判断当前是否需要进Utran状态机处理*/
    if ( VOS_FALSE == NAS_UTRANCTRL_IsNeedUtranCtrlFsmProcMsg(pstMsg))
    {
        return VOS_FALSE;

    }

    /* 状态机处理之前,取得当前的状态机名称 */
    enPreFsmId = NAS_UTRANCTRL_GetCurrFsmId();

    /* 在当前状态机中处理当前消息 */
    ulRslt = NAS_UTRANCTRL_ProcessMsgInFsm(ulEventType, pstMsg);

    /* 由空闲态转到其他状态,则需要继续处理当前消息 */
    if ((NAS_UTRANCTRL_FSM_MAIN   != NAS_UTRANCTRL_GetCurrFsmId())
     && (NAS_UTRANCTRL_FSM_MAIN   == enPreFsmId))
    {
        /* 状态机处理之前,取得当前的状态机名称 */
        enPreFsmId = NAS_UTRANCTRL_GetCurrFsmId();

        ulRslt = NAS_UTRANCTRL_ProcessMsgInFsm(ulEventType, pstMsg);
    }

    /* 从其它状态机切换到IDLE状态机,清除缓存的搜网或SYSCFG请求消息 */
    if ((NAS_UTRANCTRL_FSM_MAIN == NAS_UTRANCTRL_GetCurrFsmId())
     && (NAS_UTRANCTRL_FSM_MAIN != enPreFsmId))
    {
        NAS_UTRANCTRL_ClearBufferedSndUtranReqMsg();
    }

    /* 返回消息的处理结果 */
    return ulRslt;
}