コード例 #1
0
ファイル: hwtimer_pit.c プロジェクト: BillyZhangZ/wifi
/*!
 * \cond DOXYGEN_PRIVATE
 *
 * \brief Atomically captures current time into HWTIMER_TIME_STRUCT structure
 *
 * Corrects/normalizes the values if necessary (interrupt pending, etc.)
 *
 * \param hwtimer[in] Pointer to hwtimer structure.
 * \param time[out]   Pointer to time structure. This value is filled with current value of the timer.
 *
 * \return MQX_OK Success.
 *
 * \see hwtimer_pit_init
 * \see hwtimer_pit_deinit
 * \see hwtimer_pit_set_div
 * \see hwtimer_pit_start
 * \see hwtimer_pit_stop
 * \see hwtimer_pit_isr
 * \see hwtimer_pit_isr_shared
 */
static _mqx_int hwtimer_pit_get_time(HWTIMER_PTR hwtimer, HWTIMER_TIME_PTR time)
{
    PIT_MemMapPtr   pit_base    = (PIT_MemMapPtr) hwtimer->ll_context[0];
    uint32_t        pit_channel = GET_PIT_CHANNEL_FROM_PITID(hwtimer->ll_context[1]);
    uint32_t        temp_cval;

    /* Disable interrupt from timer*/
    _int_disable();
    time->TICKS = hwtimer->ticks;

    temp_cval  = PIT_CVAL_REG(pit_base, pit_channel);
    /* Check pending interrupt flag */
    if(PIT_TFLG_REG(pit_base, pit_channel) & PIT_TFLG_TIF_MASK)
    {
        _int_enable();
        time->SUBTICKS = hwtimer->modulo - 1;
    }
    else
    {
        _int_enable();
        time->SUBTICKS = PIT_LDVAL_REG(pit_base, pit_channel) - temp_cval;
    }

    return MQX_OK;
}
コード例 #2
0
ファイル: hwtimer_pit.c プロジェクト: BillyZhangZ/wifi
/*!
 * \cond DOXYGEN_PRIVATE
 *
 * \brief Sets up timer with divider settings closest to the requested total divider factor.
 *
 * Called by hwtimer_set_freq() and hwtimer_set_period().
 * Fills in the divider (actual total divider) and modulo (sub-tick resolution) members of the HWTIMER structure.
 *
 * \param hwtimer[in] Pointer to hwtimer structure.
 * \param divider[in] Value which divide input clock of pit timer module to obtain requested period of timer.
 *
 * \return MQX_OK                Success.
 * \return MQX_INVALID_PARAMETER Divider is equal to zero.
 *
 * \see hwtimer_pit_init
 * \see hwtimer_pit_deinit
 * \see hwtimer_pit_start
 * \see hwtimer_pit_stop
 * \see hwtimer_pit_get_time
 * \see hwtimer_pit_isr
 * \see hwtimer_pit_isr_shared
 */
static _mqx_int hwtimer_pit_set_div(HWTIMER_PTR hwtimer, uint32_t divider)
{
    PIT_MemMapPtr pit_base  = (PIT_MemMapPtr) hwtimer->ll_context[0];
    uint32_t pit_channel     = GET_PIT_CHANNEL_FROM_PITID(hwtimer->ll_context[1]);
    #if MQX_CHECK_ERRORS
    if (0 == divider)
    {
        return MQX_INVALID_PARAMETER;
    }
    #endif

    PIT_LDVAL_REG(pit_base, pit_channel)   = divider - 1;

    hwtimer->divider    = divider;
    hwtimer->modulo     = divider;

    return MQX_OK;
}
コード例 #3
0
ファイル: audio_timer.c プロジェクト: gxliu/MQX_3.8.0
/*FUNCTION*-----------------------------------------------------------------
*
* Function Name   : _kinetis_timer_init_freq
* Returned Value  : the clock rate for the timer (ns per hw tick)
* Comments        :
*   this function will set up a timer to interrupt
*
*END*---------------------------------------------------------------------*/
void _kinetis_timer_init_freq
   (
      /* [IN] the timer to initialize */
      _mqx_uint timer,

      /* [IN] ticks per second */
      uint_32   tickfreq,
      
      /* [IN] the system clock speed in MHz */
      uint_32   system_clock,

      /* [IN] Unmask the timer after initializing */
      boolean   unmask_timer
   )
{ /* Body */

    if(tickfreq != 0)
    {
        /* Enable PIT Module Clock */
        SIM_SCGC6 |= SIM_SCGC6_PIT_MASK;
        
        /* Configure PIT */
        PIT_MCR = ~(PIT_MCR_FRZ_MASK |PIT_MCR_MDIS_MASK);

        /* Timer counter value */
        PIT_LDVAL_REG(PIT_BASE_PTR,timer) = system_clock/tickfreq;

        /* Enable PIT interrupt */
        PIT_TCTRL_REG(PIT_BASE_PTR,timer) = PIT_TCTRL_TEN_MASK;
        
        /* Mask PIT interrupt flag */
        PIT_TFLG_REG(PIT_BASE_PTR,timer)= PIT_TFLG_TIF_MASK; 
        
    }
    if (unmask_timer) 
    {
        _kinetis_timer_unmask_int(timer);
    } 
}