/**
The constructor function enables ACPI IO space.
If ACPI I/O space not enabled, this function will enable it.
It will always return RETURN_SUCCESS.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
UINTN AcpiCtlReg;
UINT8 AcpiEnBit;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return RETURN_UNSUPPORTED;
}
//
// Check to see if the Power Management Base Address is already enabled
//
if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
// If the Power Management Base Address is not programmed,
// then program the Power Management Base Address from a PCD.
//
PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// Enable PMBA I/O port decodes
//
PciOr8 (AcpiCtlReg, AcpiEnBit);
}
return RETURN_SUCCESS;
}
/**
The constructor function caches the ACPI tick counter address, and,
if necessary, enables ACPI IO space.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
UINTN PmRegMisc;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_PIIX4 (0x40);
PmRegMisc = POWER_MGMT_REGISTER_PIIX4 (0x80);
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (0x40);
PmRegMisc = POWER_MGMT_REGISTER_Q35 (0x80);
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return RETURN_UNSUPPORTED;
}
mAcpiTimerIoAddr = (PciRead32 (Pmba) & ~PMBA_RTE) + ACPI_TIMER_OFFSET;
//
// Check to see if the Power Management Base Address is already enabled
//
if ((PciRead8 (PmRegMisc) & PMIOSE) == 0) {
//
// If the Power Management Base Address is not programmed,
// then program the Power Management Base Address from a PCD.
//
PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// Enable PMBA I/O port decodes in PMREGMISC
//
PciOr8 (PmRegMisc, PMIOSE);
}
return RETURN_SUCCESS;
}
/**
Internal function to read the current tick counter of ACPI.
Dynamically compute the address of the ACPI tick counter based on the
properties of the underlying platform, to avoid relying on global variables.
@return The tick counter read.
**/
UINT32
InternalAcpiGetTimerTick (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return 0;
}
//
// Read PMBA to read and return the current ACPI timer value.
//
return IoRead32 ((PciRead32 (Pmba) & ~PMBA_RTE) + ACPI_TIMER_OFFSET);
}
/**
The constructor function caches the ACPI tick counter address
At the time this constructor runs (DXE_CORE or later), ACPI IO space
has already been enabled by either PlatformPei or by the "Base"
instance of this library.
In order to avoid querying the underlying platform type during each
tick counter read operation, we cache the counter address during
initialization of this instance of the Timer Library.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PcdGet16 (PcdOvmfHostBridgePciDevId);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_PIIX4 (0x40);
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (0x40);
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return RETURN_UNSUPPORTED;
}
mAcpiTimerIoAddr = (PciRead32 (Pmba) & ~PMBA_RTE) + ACPI_TIMER_OFFSET;
return RETURN_SUCCESS;
}
VOID
MiscInitialization (
VOID
)
{
UINTN PmCmd;
UINTN Pmba;
UINTN AcpiCtlReg;
UINT8 AcpiEnBit;
//
// Disable A20 Mask
//
IoOr8 (0x92, BIT1);
//
// Build the CPU HOB with guest RAM size dependent address width and 16-bits
// of IO space. (Side note: unlike other HOBs, the CPU HOB is needed during
// S3 resume as well, so we build it unconditionally.)
//
BuildCpuHob (mPhysMemAddressWidth, 16);
//
// Determine platform type and save Host Bridge DID to PCD
//
switch (mHostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
PmCmd = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
break;
case INTEL_Q35_MCH_DEVICE_ID:
PmCmd = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, mHostBridgeDevId));
ASSERT (FALSE);
return;
}
PcdSet16 (PcdOvmfHostBridgePciDevId, mHostBridgeDevId);
//
// If the appropriate IOspace enable bit is set, assume the ACPI PMBA
// has been configured (e.g., by Xen) and skip the setup here.
// This matches the logic in AcpiTimerLibConstructor ().
//
if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
// The PEI phase should be exited with fully accessibe ACPI PM IO space:
// 1. set PMBA
//
PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// 2. set PCICMD/IOSE
//
PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);
//
// 3. set ACPI PM IO enable bit (PMREGMISC:PMIOSE or ACPI_CNTL:ACPI_EN)
//
PciOr8 (AcpiCtlReg, AcpiEnBit);
}
if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
//
// Set Root Complex Register Block BAR
//
PciWrite32 (
POWER_MGMT_REGISTER_Q35 (ICH9_RCBA),
ICH9_ROOT_COMPLEX_BASE | ICH9_RCBA_EN
);
//
// Set PCI Express Register Range Base Address
//
PciExBarInitialization ();
}
}
/**
The constructor function caches the ACPI tick counter address, and,
if necessary, enables ACPI IO space.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
UINT32 PmbaAndVal;
UINT32 PmbaOrVal;
UINTN AcpiCtlReg;
UINT8 AcpiEnBit;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
#ifdef VBOX
// HACK ALERT! There is no host bridge device in the PCIe chipset, and the same PIIX4 PM device is used.
// But there might be some other device at 0:0.0.
default:
#endif
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
PmbaAndVal = ~(UINT32)PIIX4_PMBA_MASK;
PmbaOrVal = PIIX4_PMBA_VALUE;
AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
PmbaAndVal = ~(UINT32)ICH9_PMBASE_MASK;
PmbaOrVal = ICH9_PMBASE_VALUE;
AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
break;
#ifndef VBOX
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return RETURN_UNSUPPORTED;
#endif
}
//
// Check to see if the Power Management Base Address is already enabled
//
if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
// If the Power Management Base Address is not programmed,
// then program it now.
//
PciAndThenOr32 (Pmba, PmbaAndVal, PmbaOrVal);
//
// Enable PMBA I/O port decodes
//
PciOr8 (AcpiCtlReg, AcpiEnBit);
}
mAcpiTimerIoAddr = (PciRead32 (Pmba) & ~PMBA_RTE) + ACPI_TIMER_OFFSET;
return RETURN_SUCCESS;
}
