void ccnet_processor_handle_response (CcnetProcessor *processor,
char *code, char *code_msg,
char *content, int clen)
{
if ((code[0] == '5' || code[0] == '4') &&
!CCNET_IS_KEEPALIVE2_PROC(processor))
{
ccnet_warning ("[Proc] peer %.10s, Shutdown processor %s(%d) for bad response: %s %s\n",
processor->peer->id, GET_PNAME(processor), PRINT_ID(processor->id),
code, code_msg);
/* Stub proc should relay the message before it shuts down. */
if (CCNET_IS_SERVICE_PROXY_PROC(processor) ||
CCNET_IS_SERVICE_STUB_PROC(processor)) {
CCNET_PROCESSOR_GET_CLASS (processor)->handle_response (
processor, code, code_msg, content, clen);
}
if (memcmp(code, SC_UNKNOWN_SERVICE, 3) == 0)
processor->failure = PROC_NO_SERVICE;
else if (memcmp(code, SC_PERM_ERR, 3) == 0)
processor->failure = PROC_PERM_ERR;
else if (memcmp(code, SC_CON_TIMEOUT, 3) == 0)
processor->failure = PROC_CON_TIMEOUT;
else if (memcmp(code, SC_KEEPALIVE_TIMEOUT, 3) == 0)
processor->failure = PROC_TIMEOUT;
else if (memcmp(code, SC_NETDOWN, 3) == 0)
processor->failure = PROC_NETDOWN;
else
processor->failure = PROC_BAD_RESP;
ccnet_processor_done (processor, FALSE);
return;
}
processor->t_packet_recv = time(NULL);
if (memcmp (code, SC_PROC_KEEPALIVE, 3) == 0) {
ccnet_processor_keep_alive_response (processor);
} else if (memcmp (code, SC_PROC_ALIVE, 3) == 0) {
/* do nothing */
} else if (memcmp (code, SC_PROC_DEAD, 3) == 0) {
ccnet_debug ("[Proc] Shutdown processor %s(%d) when remote processor dies\n",
GET_PNAME(processor), PRINT_ID(processor->id));
if (CCNET_IS_SERVICE_PROXY_PROC(processor) ||
CCNET_IS_SERVICE_STUB_PROC(processor)) {
CCNET_PROCESSOR_GET_CLASS (processor)->handle_response (
processor, code, code_msg, content, clen);
}
processor->failure = PROC_REMOTE_DEAD;
ccnet_processor_done (processor, FALSE);
} else
CCNET_PROCESSOR_GET_CLASS (processor)->handle_response (processor,
code, code_msg,
content, clen);
}
void
ccnet_processor_done (CcnetProcessor *processor,
gboolean success)
{
if (processor->thread_running) {
processor->delay_shutdown = TRUE;
processor->was_success = success;
return;
}
if (processor->state == STATE_IN_SHUTDOWN) {
return;
}
processor->state = STATE_IN_SHUTDOWN;
if (processor->failure == PROC_NOTSET && success)
processor->failure = PROC_DONE;
g_debug ("[proc] Processor %s(%d) done %d\n", GET_PNAME(processor),
PRINT_ID(processor->id), success);
/* Notify */
if (!IS_SLAVE (processor) && success) {
ccnet_processor_send_update (processor, SC_PROC_DONE, SS_PROC_DONE,
NULL, 0);
}
g_signal_emit (processor, signals[DONE_SIG], 0, success);
ccnet_client_remove_processor (processor->session, processor);
ccnet_processor_release_resource (processor);
ccnet_proc_factory_recycle (processor->session->proc_factory, processor);
}
//=============================================================================
// outputs usage information of this tool
//=============================================================================
void PrintUsage() {
PRINT_ID("TTArchive");
fprintf(USAGE_OUT, "Usage: ttarchive [flags] <cfgfile> <varname> [folder]\n\n"\
" -89 .... generate TI89 variable\n"\
" -92 .... generate TI92p variable\n"\
" -v .... verbose (unsets -quiet)\n"\
" -quiet ... don't output standard messages (unsets -v)\n"\
" -e <extension> .... use special extension\n\n"\
" cfgfile .... configuration file to use\n"\
" varname .... on-calc variable name of output\n"\
" folder .... on-calc destination folder (OPTIONAL)\n\n"\
" generates an archive file. The contents of the archive\n"\
" have to be specified in a configfile where each line contains\n"\
" one file which should be added to the archive.\n"\
" An archive file can hold compressed or uncompressed entries.\n"\
" If an entry should be compressed add tag \"compress\" at the\n"\
" end of the config line.\n\n"\
" [-------- format of one line in the configfile --------]\n"\
" <file_to_store> <varname> <attr1> <attr2> [compress]\n\n"\
" file_to_store ... name including path to inputfile\n"\
" varname ... name used to find data in archive (max. 8 chars)\n"\
" attr1 attr2 ... misc. attributes which may be queried from program\n"\
" (0..65536)\n"\
" compress ... if this tag is set on the end of the line the\n"\
" given inputfile will be compressed before adding\n"\
" it to the archive\n\n");
}
//=============================================================================
// outputs usage information of this tool
//=============================================================================
void PrintUsage() {
PRINT_ID("TTSetName");
fprintf(USAGE_OUT, "Usage: ttsetname [flags] file\n\n" \
" -quit ... don't output standard messages\n" \
" -name string ... set oncalc name to given string (max. 8 chars)\n" \
" -folder string ... set oncalc folder to given string (max. 8 chars)\n\n"\
" sets oncalc name and folder of given TI89/TI92p file\n");
}
void ccnet_processor_handle_update (CcnetProcessor *processor,
char *code, char *code_msg,
char *content, int clen)
{
g_object_ref (processor);
processor->is_active = TRUE;
if (code[0] == '5') {
ccnet_warning ("[Proc] Shutdown processor %s(%d) for bad update: %s %s\n",
GET_PNAME(processor), PRINT_ID(processor->id),
code, code_msg);
if (memcmp(code, SC_UNKNOWN_SERVICE, 3) == 0)
processor->failure = PROC_NO_SERVICE;
else if (memcmp(code, SC_PERM_ERR, 3) == 0)
processor->failure = PROC_PERM_ERR;
else if (memcmp(code, SC_NETDOWN, 3) == 0)
processor->failure = PROC_REMOTE_DEAD;
else
processor->failure = PROC_BAD_RESP;
ccnet_processor_done (processor, FALSE);
return;
}
if (strncmp (code, SC_PROC_KEEPALIVE, 3) == 0) {
ccnet_processor_send_response (processor, SC_PROC_ALIVE,
SS_PROC_ALIVE, NULL, 0);
} else if (strncmp (code, SC_PROC_DEAD, 3) == 0) {
g_warning ("[proc] Shutdown processor %s(%d) when peer(%.8s) processor is dead\n",
GET_PNAME(processor), PRINT_ID(processor->id),
processor->peer_id);
processor->failure = PROC_REMOTE_DEAD;
ccnet_processor_done (processor, FALSE);
} else if (strncmp (code, SC_PROC_DONE, 3) == 0) {
g_debug ("[proc] Shutdown processor when receive 103: service done\n");
ccnet_processor_done (processor, TRUE);
} else {
CCNET_PROCESSOR_GET_CLASS (processor)->handle_update (processor,
code, code_msg,
content, clen);
}
processor->is_active = FALSE;
g_object_unref (processor);
}
static void handle_response (CcnetProcessor *processor,
char *code, char *code_msg,
char *content, int clen)
{
ServiceProxyPriv *priv = GET_PRIV (processor);
if(!priv->stub_proc || !((CcnetProcessor *)priv->stub_proc)->peer->is_local)
ccnet_debug ("[Svc Proxy] %s:%d [%s] handle response: %s %s\n",
GET_PNAME(processor), PRINT_ID(processor->id),
priv->name, code, code_msg);
/* relay this response */
ccnet_processor_send_response (processor, code, code_msg, content, clen);
}
void
ccnet_processor_done (CcnetProcessor *processor, gboolean success)
{
if (processor->thread_running) {
processor->delay_shutdown = TRUE;
processor->was_success = success;
return;
}
if (processor->state == STATE_IN_SHUTDOWN) {
return;
}
processor->state = STATE_IN_SHUTDOWN;
if (processor->failure == PROC_NOTSET)
processor->failure = PROC_DONE;
if (!processor->peer->is_local)
ccnet_debug ("Processsor %s(%d) done %d\n", GET_PNAME(processor),
PRINT_ID(processor->id), success);
if (!processor->detached && success)
{
if (!IS_SLAVE (processor)) {
ccnet_processor_send_update (processor, SC_PROC_DONE, SS_PROC_DONE,
NULL, 0);
}
}
/* When we emit the done signal, the corresponding handler may
* shutdown the peer, we should remove this processor from the
* peers processor list, otherwise this processor will be freed
* twice. */
g_signal_emit (processor, signals[DONE_SIG], 0, success);
if (!processor->detached) {
ccnet_peer_remove_processor (processor->peer, processor);
}
ccnet_processor_release_resource (processor);
ccnet_proc_factory_recycle (processor->session->proc_factory, processor);
}
//=============================================================================
// outputs usage information of this tool
//=============================================================================
void PrintUsage() {
#ifndef EMBEDDED_USE
PRINT_ID("TTBin2OTH");
#endif
fprintf(USAGE_OUT, "Usage: ttbin2oth [flags] <-89 | -92> <extension> <infile> <varname> [folder]\n\n" \
" -quiet ... don't output standard messages\n" \
" -strip ... MUST be set if the input is already a TI file\n" \
" (generates a temporary file called bin2oth.tmp for\n" \
" the stripped inputfile)\n" \
" -89 ... generate a TI89 file\n" \
" -92 ... generate a TI92p file\n\n" \
" extension ... on-calc extension (up to 4 characters)\n" \
" varname ... on-calc variable name (up to 8 characters)\n" \
" folder ... on-calc destination folder (OPTIONAL)\n\n" \
" enwraps file into a custom TI89 or TI92p variable with given <extension>\n"\
" NOTE1: the extension length may vary between 1 and 4 characters\n" \
" NOTE2: the output filename is generated by taking the given varname and\n" \
" appending \".89y\" or \".9xy\" to it.\n" \
" NOTE3: if a generated file CAN'T BE UPLOADED, you are probably using a\n" \
" reserved AMS name for your variable. Just try another name in\n" \
" this case.\n\n");
}
int main(int argc, char* argv[]) {
#else
int TTDos2Ebk(int argc,char* argv[]) {
#endif
FILE* fp = NULL;
long size;
char* buf1 = NULL;
char* buf2 = NULL;
char* infile = 0;
char* outfile = 0;
//int replace = 1;
int verbose = 0;
int i;
#ifndef EMBEDDED_USE
PRINT_ID("TTDos2EBK");
#endif
if (argc < 3) {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
// parse arguments
for (i=1; i<argc; i++) {
if (!strcmp(argv[i], "-v")) verbose = 1;
else if (!infile) infile = argv[i];
else if (!outfile) outfile = argv[i];
else {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
}
if (!infile || !outfile) {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
if (!(fp = fopen(infile,"rb"))) {
fprintf(stderr,"ERROR: cannot open inputfile %s\n",infile);
return 1;
}
fseek(fp,0,SEEK_END);
size = ftell(fp);
rewind(fp);
if (verbose) fprintf(stderr,"inputsize is %ld bytes\n",size);
if (!(buf1 = malloc(size*2))) { // size*2 necessary for double-space
fprintf(stderr,"ERROR: cannot allocate %ld bytes\n",size);
fclose(fp);
free(buf2);
free(buf1);
return 1;
}
if (!(buf2 = malloc(size*2))) { // size*2 necessary for double-space
fprintf(stderr,"ERROR: cannot allocate %ld bytes\n",size);
fclose(fp);
free(buf2);
free(buf1);
return 1;
}
if (fread(buf1,size,1,fp) != 1) {
fprintf(stderr,"ERROR: cannot read content of inputfile %s\n",infile);
fclose(fp);
free(buf2);
free(buf1);
return 1;
}
fclose(fp);
if (!(fp = fopen(outfile,"wb"))) {
fprintf(stderr,"ERROR: cannot open outputfile %s\n",outfile);
free(buf2);
free(buf1);
return 1;
}
size = Translate(buf1,buf2,size);
if (verbose) fprintf(stderr,"size after translation = %ld\n",size);
size = RemoveAll0D(buf2,buf1,size);
if (verbose) fprintf(stderr,"after removing all 0x0D is size %ld bytes\n",size);
size = Preprocess(buf1,buf2,size,verbose);
if (fwrite(buf2,size,1,fp) != 1) {
fprintf(stderr,"ERROR: cannot write %ld bytes to outputfile %s\n",size,outfile);
}
else {
if (verbose) fprintf(stderr,"%ld bytes written to file %s\n",size,outfile);
}
fclose(fp);
free(buf2);
free(buf1);
return 0;
}
int main(int argc,char *argv[]) {
#else
int TTBin2OTH(int argc,char *argv[]) {
#endif
char* infile = NULL;
char* folder = NULL;
char* name = NULL;
char* extension = NULL;
int calctype = -1;
int strip = 0;
FILE* ifp;
FILE* ofp;
char outfile[1024];
unsigned char* buffer;
int length;
unsigned char* outbuffer;
unsigned int outlength;
int n;
char* tmpfilename = "bin2oth.tmp";
int quiet = 0;
// check for too less arguments
if (argc < 4) {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
// parse arguments
for (n=1; n<argc; n++) {
if (!strcmp(argv[n], "-89")) calctype = CALC_TI89;
else if (!strcmp(argv[n], "-92")) calctype = CALC_TI92P;
else if (!strcmp(argv[n], "-strip")) strip = 1;
else if (!strcmp(argv[n], "-quiet")) quiet = 1;
else if (argv[n][0] == '-') {
fprintf(stderr,"ERROR: invalid option %s",argv[n]);
return 1;
}
else if (!extension) extension = argv[n];
else if (!infile) infile = argv[n];
else if (!name) name = argv[n];
else if (!folder) folder = argv[n];
else {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
}
// check if all necessary arguments are supplied
if (!infile || !name || calctype == -1 || !extension) {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
n = strlen(extension);
if (n<1 || n>4) {
fprintf(stderr,"ERROR: extension length must be between 1 and 4 characters\n");
return 1;
}
if (strip) {
char* params[4];
params[0] = "";
params[1] = "-quiet";
params[2] = infile;
params[3] = tmpfilename;
if (TTStrip(4,params)) {
fprintf(stderr,"ERROR: stripping inputfile %s failed\n",infile);
return 1;
}
infile = tmpfilename;
}
#ifndef EMBEDDED_USE
if (!quiet) PRINT_ID("TTBin2OTH");
#endif
if (!(ifp = fopen(infile,"rb"))) {
fprintf(stderr,"ERROR: cannot open inputfile %s\n",infile);
if (strip) remove(tmpfilename);
return 1;
}
if (calctype == CALC_TI89) sprintf(outfile,"%s.89y",name);
else sprintf(outfile,"%s.9xy",name);
if (!(ofp = fopen(outfile,"wb"))) {
fprintf(stderr,"ERROR: cannot open outputfile %s\n",outfile);
fclose(ifp);
if (strip) remove(tmpfilename);
return 1;
}
// read infile into buffer
fseek(ifp,0,SEEK_END);
length = ftell(ifp);
buffer = (unsigned char*)malloc(length);
if (!buffer) {
fprintf(stderr,"ERROR: cannot allocate memory (%d bytes)\n",length);
fclose(ifp);
fclose(ofp);
if (strip) remove(tmpfilename);
return 1;
}
rewind(ifp);
fread(buffer,1,length,ifp);
fclose(ifp);
outbuffer = DataBuffer2OTHBuffer(calctype,folder,name,extension,length,buffer,&outlength);
n = 0;
if (!outbuffer) {
n = 1;
}
else {
if (fwrite(outbuffer,outlength,1,ofp) != 1) {
fprintf(stderr,"ERROR: cannot write %u bytes to outputfile to %s\n",outlength,outfile);
n = 1;
}
else {
if (!quiet) fprintf(stdout,"%u bytes written to %s\n",outlength,outfile);
}
free(outbuffer);
}
free(buffer);
fclose(ofp);
if (strip) remove(tmpfilename);
return n;
}
//=============================================================================
// ... just a stupid main ...
//=============================================================================
int main(int argc,char *argv[]) {
char* file = NULL;
char* folder = NULL;
char* name = NULL;
FILE* fp;
int n;
int quiet = 0;
StrHeader buffer;
// parse arguments
for (n=1; n<argc; n++) {
if (!strcmp(argv[n], "-quiet")) quiet = 1;
else if (!strcmp(argv[n], "-folder")) {
if (n == argc -1) {
fprintf(stderr,"ERROR: missing parameter for option '-folder'\n");
return 1;
}
if (strlen(argv[n+1])>8) {
fprintf(stderr,"ERROR: folder too long (max. 8 characters)\n");
return 1;
}
folder = argv[n+1];
n++;
}
else if (!strcmp(argv[n], "-name")) {
if (n == argc -1) {
fprintf(stderr,"ERROR: missing parameter for option '-name'\n");
return 1;
}
if (strlen(argv[n+1])>8) {
fprintf(stderr,"ERROR: name too long (max. 8 characters)\n");
return 1;
}
name = argv[n+1];
n++;
}
else if (argv[n][0] == '-') {
fprintf(stderr,"ERROR: invalid option %s",argv[n]);
return 1;
}
else if (!file) file = argv[n];
else {
PrintUsage();
return 1;
}
}
// check if all necessary arguments are supplied
if (!file || (!name && !folder)) {
PrintUsage();
return 1;
}
if (!quiet) PRINT_ID("TTBin2OTH");
if (!(fp = fopen(file,"rb+"))) {
fprintf(stderr,"ERROR: cannot open file %s\n",file);
return 1;
}
if (fread(&buffer,sizeof(StrHeader),1,fp) != 1) {
fprintf(stderr,"ERROR: cannot read signature\n");
fclose(fp);
return 1;
}
if (strncmp(buffer.signature,SIGNATURE_TI89,8) && strncmp(buffer.signature,SIGNATURE_TI92P,8)) {
fprintf(stderr,"ERROR: neither TI89 nor TI92p file\n");
fclose(fp);
return 1;
}
if (name) {
memset(buffer.name,0,8);
strncpy(buffer.name,name,8);
}
if (folder) {
memset(buffer.folder,0,8);
strncpy(buffer.folder,folder,8);
}
rewind(fp);
if (fwrite(&buffer,sizeof(StrHeader),1,fp) != 1) {
fprintf(stderr,"ERROR: cannot write to %s\n",file);
fclose(fp);
return 1;
}
fclose(fp);
if (!quiet) {
if (name) {
fprintf(stderr,"file %s: new oncalc name = %s\n",file,name);
}
if (folder) {
fprintf(stderr,"file %s: new oncalc folder = %s\n",file,folder);
}
}
return 0;
}
int main(int argc,char *argv[]) {
#else
int TTArchive(int argc,char *argv[]) {
#endif
char* folder = NULL;
char* name = NULL;
char* cfgname = NULL;
int calctype = -1;
FILE* ofp;
char outfile[1024];
unsigned char* buffer;
unsigned long length;
unsigned char* outbuffer;
unsigned int outlength;
unsigned int retval;
char* extension = "tta"; // default extension
int n;
int verbose = 0;
int quiet = 0;
// check for too less arguments
if (argc < 4) {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
// parse arguments
for (n=1; n<argc; n++) {
if (!strcmp(argv[n], "-89")) calctype = CALC_TI89;
else if (!strcmp(argv[n], "-92")) calctype = CALC_TI92P;
else if (!strcmp(argv[n], "-quiet")) verbose = 0,quiet = 1;
else if (!strcmp(argv[n], "-v")) verbose = 1,quiet = 0;
else if (!strcmp(argv[n],"-e")) {
if (n==argc-1) {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
else {
int length;
n++;
extension = argv[n];
length = strlen(extension);
if (length < 1 || length > 4) {
fprintf(stderr,"ERROR: extension have to be between 1 and 4 characters\n");
return 1;
}
}
}
else if (argv[n][0] == '-') {
fprintf(stderr,"ERROR: invalid option %s",argv[n]);
return 1;
}
else if (!cfgname) cfgname = argv[n];
else if (!name) name = argv[n];
else if (!folder) folder = argv[n];
else {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
}
// check if all necessary arguments are supplied
if (!cfgname || !name || calctype == -1) {
#ifndef EMBEDDED_USE
PrintUsage();
#endif
return 1;
}
#ifndef EMBEDDED_USE
if (!quiet) PRINT_ID("TTArchive");
#endif
if (calctype == CALC_TI89) sprintf(outfile,"%s.89y",name);
else sprintf(outfile,"%s.9xy",name);
buffer = ProcessConfigFile(cfgname,&length,verbose);
if (!buffer) return 1;
if (!(ofp = fopen(outfile,"wb"))) {
fprintf(stderr,"ERROR: cannot open outputfile %s\n",outfile);
return 1;
}
outbuffer = DataBuffer2OTHBuffer(calctype,folder,name,extension,length,buffer,&outlength);
retval = 0;
if (!outbuffer) {
retval = 1;
}
else {
if (fwrite(outbuffer,outlength,1,ofp) != 1) {
fprintf(stderr,"ERROR: cannot write %u bytes to %s\n",outlength,outfile);
retval = 1;
}
else {
if (!quiet) fprintf(stdout,"%u bytes written to %s\n",outlength,outfile);
}
free(outbuffer);
}
free(buffer);
fclose(ofp);
return retval;
}