/**
* AddBinding
*
* Called from FindEntry() if we read an entry off of disk
* - it may already have a generation number
* - a generation number conflict is an error
*
* Called from BindEntry()
* - a generation number needs to be assigned
*/
nsresult
nsDiskCacheBindery::AddBinding(nsDiskCacheBinding * binding)
{
NS_ENSURE_ARG_POINTER(binding);
NS_ASSERTION(initialized, "nsDiskCacheBindery not initialized");
// find hash entry for key
HashTableEntry * hashEntry;
hashEntry = (HashTableEntry *)
PL_DHashTableOperate(&table,
(void *)(uintptr_t) binding->mRecord.HashNumber(),
PL_DHASH_ADD);
if (!hashEntry) return NS_ERROR_OUT_OF_MEMORY;
if (hashEntry->mBinding == nullptr) {
hashEntry->mBinding = binding;
if (binding->mGeneration == 0)
binding->mGeneration = 1; // if generation uninitialized, set it to 1
return NS_OK;
}
// insert binding in generation order
nsDiskCacheBinding * p = hashEntry->mBinding;
bool calcGeneration = (binding->mGeneration == 0); // do we need to calculate generation?
if (calcGeneration) binding->mGeneration = 1; // initialize to 1 if uninitialized
while (1) {
if (binding->mGeneration < p->mGeneration) {
// here we are
PR_INSERT_BEFORE(binding, p);
if (hashEntry->mBinding == p)
hashEntry->mBinding = binding;
break;
}
if (binding->mGeneration == p->mGeneration) {
if (calcGeneration) ++binding->mGeneration; // try the next generation
else {
NS_ERROR("### disk cache: generations collide!");
return NS_ERROR_UNEXPECTED;
}
}
p = (nsDiskCacheBinding *)PR_NEXT_LINK(p);
if (p == hashEntry->mBinding) {
// end of line: insert here or die
p = (nsDiskCacheBinding *)PR_PREV_LINK(p); // back up and check generation
if (p->mGeneration == 255) {
NS_WARNING("### disk cache: generation capacity at full");
return NS_ERROR_UNEXPECTED;
}
PR_INSERT_BEFORE(binding, hashEntry->mBinding);
break;
}
}
return NS_OK;
}
void
nsGenConList::Insert(nsGenConNode* aNode)
{
if (mFirstNode) {
// Check for append.
if (NodeAfter(aNode, Prev(mFirstNode))) {
PR_INSERT_BEFORE(aNode, mFirstNode);
}
else {
// Binary search.
// the range of indices at which |aNode| could end up.
// (We already know it can't be at index mSize.)
PRUint32 first = 0, last = mSize - 1;
// A cursor to avoid walking more than the length of the list.
nsGenConNode *curNode = Prev(mFirstNode);
PRUint32 curIndex = mSize - 1;
while (first != last) {
PRUint32 test = (first + last) / 2;
if (last == curIndex) {
for ( ; curIndex != test; --curIndex)
curNode = Prev(curNode);
} else {
for ( ; curIndex != test; ++curIndex)
curNode = Next(curNode);
}
if (NodeAfter(aNode, curNode)) {
first = test + 1;
// if we exit the loop, we need curNode to be right
++curIndex;
curNode = Next(curNode);
} else {
last = test;
}
}
PR_INSERT_BEFORE(aNode, curNode);
if (curNode == mFirstNode) {
mFirstNode = aNode;
}
}
}
else {
// initialize list with first node
PR_INIT_CLIST(aNode);
mFirstNode = aNode;
}
++mSize;
NS_ASSERTION(aNode == mFirstNode || NodeAfter(aNode, Prev(aNode)),
"sorting error");
NS_ASSERTION(IsLast(aNode) || NodeAfter(Next(aNode), aNode),
"sorting error");
}
/**
* Called from PL_HashTableEnumerateEntries
* A pointer to a PRCList (circular linked list) is passed in.
* Once enumeration is complete, the PRCList will contain a lexically
* ordered list of a copy of the keys in the hash.
* The caller needs to free the copies
*/
static PRIntn OrderLoop(PLHashEntry *he, PRIntn index, void *arg)
{
PRCList *qp = (PRCList *)arg;
OrderedEntry_t *entry;
if (he != NULL) {
entry = (OrderedEntry_t *) PR_Malloc(sizeof(OrderedEntry_t));
entry->key = PL_strdup((char *) he->key);
if (index ==0) {
PR_APPEND_LINK((PRCList *)entry, qp);
return HT_ENUMERATE_NEXT;
}
PRCList *head = PR_LIST_HEAD(qp);
PRCList *next;
while (head != qp) {
OrderedEntry_t *current = (OrderedEntry_t *) head;
if (strcmp((char *) he->key, (char *) current->key) <=0)
break;
next = PR_NEXT_LINK(head);
head = next;
}
PR_INSERT_BEFORE((PRCList*) entry, head);
return HT_ENUMERATE_NEXT;
} else {
return HT_ENUMERATE_STOP;
}
}
PR_IMPLEMENT(PRAlarmID*) PR_SetAlarm(
PRAlarm *alarm, PRIntervalTime period, PRUint32 rate,
PRPeriodicAlarmFn function, void *clientData)
{
/*
* Create a new periodic alarm an existing current structure.
* Set up the context and compute the first notify time (immediate).
* Link the new ID into the head of the list (since it's notifying
* immediately).
*/
PRAlarmID *id = PR_NEWZAP(PRAlarmID);
if (!id)
return NULL;
id->alarm = alarm;
PR_INIT_CLIST(&id->list);
id->function = function;
id->clientData = clientData;
id->period = period;
id->rate = rate;
id->epoch = id->nextNotify = PR_IntervalNow();
(void)pr_PredictNextNotifyTime(id);
PR_Lock(alarm->lock);
PR_INSERT_BEFORE(&id->list, &alarm->timers);
PR_NotifyCondVar(alarm->cond);
PR_Unlock(alarm->lock);
return id;
} /* PR_SetAlarm */
void JavaDOMGlobals::AddToGarbage(nsISupports* domObject)
{
nsAutoLock lock(garbageLock);
jniDOMGarbage* elem = new jniDOMGarbage(domObject);
PR_INSERT_BEFORE(elem, &garbage);
PR_LOG(log, PR_LOG_DEBUG,
("JavaDOMGlobals::AddToGarbage: Scheduling %x\n", domObject));
}
/* The hash table is keyed by attribute name, and contains pointers to the
* PRCList headers. These in turn, circularly link a set of AttrGetter_s
* structures.
*/
NSAPI_PUBLIC int
ACL_AttrGetterRegister(NSErr_t *errp, const char *attr, ACLAttrGetterFn_t fn,
ACLMethod_t m, ACLDbType_t d, int position, void *arg)
{
ACLAttrGetter_t *getter;
PRHashEntry **hep;
if (position != ACL_AT_FRONT && position != ACL_AT_END) {
return -1;
}
ACL_CritEnter();
hep = PR_HashTableRawLookup(ACLAttrGetterHash, ACLPR_HashCaseString(attr), attr);
/* Now, allocate the current entry */
getter = (ACLAttrGetter_t *)CALLOC(sizeof(ACLAttrGetter_t));
if (getter == NULL) {
ACL_CritExit();
return -1;
}
getter->method = m;
getter->dbtype = d;
getter->fn = fn;
getter->arg = arg;
if (*hep == 0) { /* New entry */
PR_INIT_CLIST(&getter->list);
PR_HashTableAdd(ACLAttrGetterHash, attr, (void *)getter);
}
else {
ACLAttrGetter_t *head = (ACLAttrGetter_t *)((*hep)->value);
PR_INSERT_BEFORE(&getter->list, &head->list);
if (position == ACL_AT_FRONT) {
/* Set new head of list */
(*hep)->value = (void *)getter;
}
}
ACL_CritExit();
return 0;
}
static PRAlarmID *pr_getNextAlarm(PRAlarm *alarm, PRAlarmID *id)
{
/*
* Puts 'id' back into the sorted list iff it's not NULL.
* Removes the first element from the list and returns it (or NULL).
* List is "assumed" to be short.
*
* NB: Caller is providing locking
*/
PRCList *timer;
PRAlarmID *result = id;
PRIntervalTime now = PR_IntervalNow();
if (!PR_CLIST_IS_EMPTY(&alarm->timers))
{
if (id != NULL) /* have to put this id back in */
{
PRIntervalTime idDelta = now - id->nextNotify;
timer = alarm->timers.next;
do
{
result = (PRAlarmID*)timer;
if ((PRIntervalTime)(now - result->nextNotify) > idDelta)
{
PR_INSERT_BEFORE(&id->list, &alarm->timers);
break;
}
timer = timer->next;
} while (timer != &alarm->timers);
}
result = (PRAlarmID*)(timer = PR_LIST_HEAD(&alarm->timers));
PR_REMOVE_LINK(timer); /* remove it from the list */
}
return result;
} /* pr_getNextAlarm */
/*
** Lock the lock.
*/
PR_IMPLEMENT(void) PR_Lock(PRLock *lock)
{
PRThread *me = _PR_MD_CURRENT_THREAD();
PRIntn is;
PRThread *t;
PRCList *q;
PR_ASSERT(me != suspendAllThread);
PR_ASSERT(!(me->flags & _PR_IDLE_THREAD));
PR_ASSERT(lock != NULL);
#ifdef _PR_GLOBAL_THREADS_ONLY
_PR_MD_LOCK(&lock->ilock);
PR_ASSERT(lock->owner == 0);
lock->owner = me;
return;
#else /* _PR_GLOBAL_THREADS_ONLY */
if (_native_threads_only) {
_PR_MD_LOCK(&lock->ilock);
PR_ASSERT(lock->owner == 0);
lock->owner = me;
return;
}
if (!_PR_IS_NATIVE_THREAD(me))
_PR_INTSOFF(is);
PR_ASSERT(_PR_IS_NATIVE_THREAD(me) || _PR_MD_GET_INTSOFF() != 0);
retry:
_PR_LOCK_LOCK(lock);
if (lock->owner == 0) {
/* Just got the lock */
lock->owner = me;
lock->priority = me->priority;
/* Add the granted lock to this owning thread's lock list */
PR_APPEND_LINK(&lock->links, &me->lockList);
_PR_LOCK_UNLOCK(lock);
if (!_PR_IS_NATIVE_THREAD(me))
_PR_FAST_INTSON(is);
return;
}
/* If this thread already owns this lock, then it is a deadlock */
PR_ASSERT(lock->owner != me);
PR_ASSERT(_PR_IS_NATIVE_THREAD(me) || _PR_MD_GET_INTSOFF() != 0);
#if 0
if (me->priority > lock->owner->priority) {
/*
** Give the lock owner a priority boost until we get the
** lock. Record the priority we boosted it to.
*/
lock->boostPriority = me->priority;
_PR_SetThreadPriority(lock->owner, me->priority);
}
#endif
/*
Add this thread to the asked for lock's list of waiting threads. We
add this thread thread in the right priority order so when the unlock
occurs, the thread with the higher priority will get the lock.
*/
q = lock->waitQ.next;
if (q == &lock->waitQ || _PR_THREAD_CONDQ_PTR(q)->priority ==
_PR_THREAD_CONDQ_PTR(lock->waitQ.prev)->priority) {
/*
* If all the threads in the lock waitQ have the same priority,
* then avoid scanning the list: insert the element at the end.
*/
q = &lock->waitQ;
} else {
/* Sort thread into lock's waitQ at appropriate point */
/* Now scan the list for where to insert this entry */
while (q != &lock->waitQ) {
t = _PR_THREAD_CONDQ_PTR(lock->waitQ.next);
if (me->priority > t->priority) {
/* Found a lower priority thread to insert in front of */
break;
}
q = q->next;
}
}
PR_INSERT_BEFORE(&me->waitQLinks, q);
/*
Now grab the threadLock since we are about to change the state. We have
to do this since a PR_Suspend or PR_SetThreadPriority type call that takes
a PRThread* as an argument could be changing the state of this thread from
a thread running on a different cpu.
*/
_PR_THREAD_LOCK(me);
me->state = _PR_LOCK_WAIT;
me->wait.lock = lock;
_PR_THREAD_UNLOCK(me);
_PR_LOCK_UNLOCK(lock);
_PR_MD_WAIT(me, PR_INTERVAL_NO_TIMEOUT);
goto retry;
#endif /* _PR_GLOBAL_THREADS_ONLY */
}
static SECStatus
get_blinding_params(RSAPrivateKey *key, mp_int *n, unsigned int modLen,
mp_int *f, mp_int *g)
{
RSABlindingParams *rsabp = NULL;
blindingParams *bpUnlinked = NULL;
blindingParams *bp, *prevbp = NULL;
PRCList *el;
SECStatus rv = SECSuccess;
mp_err err = MP_OKAY;
int cmp = -1;
PRBool holdingLock = PR_FALSE;
do {
if (blindingParamsList.lock == NULL) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return SECFailure;
}
/* Acquire the list lock */
PZ_Lock(blindingParamsList.lock);
holdingLock = PR_TRUE;
/* Walk the list looking for the private key */
for (el = PR_NEXT_LINK(&blindingParamsList.head);
el != &blindingParamsList.head;
el = PR_NEXT_LINK(el)) {
rsabp = (RSABlindingParams *)el;
cmp = SECITEM_CompareItem(&rsabp->modulus, &key->modulus);
if (cmp >= 0) {
/* The key is found or not in the list. */
break;
}
}
if (cmp) {
/* At this point, the key is not in the list. el should point to
** the list element before which this key should be inserted.
*/
rsabp = PORT_ZNew(RSABlindingParams);
if (!rsabp) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
goto cleanup;
}
rv = init_blinding_params(rsabp, key, n, modLen);
if (rv != SECSuccess) {
PORT_ZFree(rsabp, sizeof(RSABlindingParams));
goto cleanup;
}
/* Insert the new element into the list
** If inserting in the middle of the list, el points to the link
** to insert before. Otherwise, the link needs to be appended to
** the end of the list, which is the same as inserting before the
** head (since el would have looped back to the head).
*/
PR_INSERT_BEFORE(&rsabp->link, el);
}
/* We've found (or created) the RSAblindingParams struct for this key.
* Now, search its list of ready blinding params for a usable one.
*/
while (0 != (bp = rsabp->bp)) {
if (--(bp->counter) > 0) {
/* Found a match and there are still remaining uses left */
/* Return the parameters */
CHECK_MPI_OK( mp_copy(&bp->f, f) );
CHECK_MPI_OK( mp_copy(&bp->g, g) );
PZ_Unlock(blindingParamsList.lock);
return SECSuccess;
}
/* exhausted this one, give its values to caller, and
* then retire it.
*/
mp_exch(&bp->f, f);
mp_exch(&bp->g, g);
mp_clear( &bp->f );
mp_clear( &bp->g );
bp->counter = 0;
/* Move to free list */
rsabp->bp = bp->next;
bp->next = rsabp->free;
rsabp->free = bp;
/* In case there're threads waiting for new blinding
* value - notify 1 thread the value is ready
*/
if (blindingParamsList.waitCount > 0) {
PR_NotifyCondVar( blindingParamsList.cVar );
blindingParamsList.waitCount--;
}
PZ_Unlock(blindingParamsList.lock);
return SECSuccess;
}
/* We did not find a usable set of blinding params. Can we make one? */
/* Find a free bp struct. */
prevbp = NULL;
if ((bp = rsabp->free) != NULL) {
/* unlink this bp */
rsabp->free = bp->next;
bp->next = NULL;
bpUnlinked = bp; /* In case we fail */
PZ_Unlock(blindingParamsList.lock);
holdingLock = PR_FALSE;
/* generate blinding parameter values for the current thread */
CHECK_SEC_OK( generate_blinding_params(key, f, g, n, modLen ) );
/* put the blinding parameter values into cache */
CHECK_MPI_OK( mp_init( &bp->f) );
CHECK_MPI_OK( mp_init( &bp->g) );
CHECK_MPI_OK( mp_copy( f, &bp->f) );
CHECK_MPI_OK( mp_copy( g, &bp->g) );
/* Put this at head of queue of usable params. */
PZ_Lock(blindingParamsList.lock);
holdingLock = PR_TRUE;
/* initialize RSABlindingParamsStr */
bp->counter = RSA_BLINDING_PARAMS_MAX_REUSE;
bp->next = rsabp->bp;
rsabp->bp = bp;
bpUnlinked = NULL;
/* In case there're threads waiting for new blinding value
* just notify them the value is ready
*/
if (blindingParamsList.waitCount > 0) {
PR_NotifyAllCondVar( blindingParamsList.cVar );
blindingParamsList.waitCount = 0;
}
PZ_Unlock(blindingParamsList.lock);
return SECSuccess;
}
/* Here, there are no usable blinding parameters available,
* and no free bp blocks, presumably because they're all
* actively having parameters generated for them.
* So, we need to wait here and not eat up CPU until some
* change happens.
*/
blindingParamsList.waitCount++;
PR_WaitCondVar( blindingParamsList.cVar, PR_INTERVAL_NO_TIMEOUT );
PZ_Unlock(blindingParamsList.lock);
holdingLock = PR_FALSE;
} while (1);
cleanup:
/* It is possible to reach this after the lock is already released. */
if (bpUnlinked) {
if (!holdingLock) {
PZ_Lock(blindingParamsList.lock);
holdingLock = PR_TRUE;
}
bp = bpUnlinked;
mp_clear( &bp->f );
mp_clear( &bp->g );
bp->counter = 0;
/* Must put the unlinked bp back on the free list */
bp->next = rsabp->free;
rsabp->free = bp;
}
if (holdingLock) {
PZ_Unlock(blindingParamsList.lock);
holdingLock = PR_FALSE;
}
if (err) {
MP_TO_SEC_ERROR(err);
}
return SECFailure;
}
/*
Apply the pending changes in the e entry to our config struct.
validate must have already been called
*/
static int
pam_passthru_apply_config (Slapi_Entry* e)
{
int rc = PAM_PASSTHRU_SUCCESS;
char **excludes = NULL;
char **includes = NULL;
char *new_service = NULL;
char *pam_ident_attr = NULL;
char *map_method = NULL;
char *dn = NULL;
PRBool fallback;
PRBool secure;
Pam_PassthruConfig *entry = NULL;
PRCList *list;
Slapi_Attr *a = NULL;
char *filter_str = NULL;
int inserted = 0;
pam_ident_attr = slapi_entry_attr_get_charptr(e, PAMPT_PAM_IDENT_ATTR);
map_method = slapi_entry_attr_get_charptr(e, PAMPT_MAP_METHOD_ATTR);
new_service = slapi_entry_attr_get_charptr(e, PAMPT_SERVICE_ATTR);
excludes = slapi_entry_attr_get_charray(e, PAMPT_EXCLUDES_ATTR);
includes = slapi_entry_attr_get_charray(e, PAMPT_INCLUDES_ATTR);
fallback = slapi_entry_attr_get_bool(e, PAMPT_FALLBACK_ATTR);
filter_str = slapi_entry_attr_get_charptr(e, PAMPT_FILTER_ATTR);
/* Require SSL/TLS if the secure attr is not specified. We
* need to check if the attribute is present to make this
* determiniation. */
if (slapi_entry_attr_find(e, PAMPT_SECURE_ATTR, &a) == 0) {
secure = slapi_entry_attr_get_bool(e, PAMPT_SECURE_ATTR);
} else {
secure = PR_TRUE;
}
/* Allocate a config struct. */
entry = (Pam_PassthruConfig *)
slapi_ch_calloc(1, sizeof(Pam_PassthruConfig));
if (NULL == entry) {
rc = PAM_PASSTHRU_FAILURE;
goto bail;
}
/* use the RDN method to derive the PAM identity by default*/
entry->pamptconfig_map_method1 = PAMPT_MAP_METHOD_RDN;
entry->pamptconfig_map_method2 = PAMPT_MAP_METHOD_NONE;
entry->pamptconfig_map_method3 = PAMPT_MAP_METHOD_NONE;
/* Fill in the struct. */
dn = slapi_entry_get_ndn(e);
if (dn) {
entry->dn = slapi_ch_strdup(dn);
}
entry->pamptconfig_fallback = fallback;
entry->pamptconfig_secure = secure;
if (!entry->pamptconfig_service ||
(new_service && PL_strcmp(entry->pamptconfig_service, new_service))) {
slapi_ch_free_string(&entry->pamptconfig_service);
entry->pamptconfig_service = new_service;
new_service = NULL; /* config now owns memory */
}
/* get the list of excluded suffixes */
pam_ptconfig_free_suffixes(entry->pamptconfig_excludes);
entry->pamptconfig_excludes = pam_ptconfig_add_suffixes(excludes);
/* get the list of included suffixes */
pam_ptconfig_free_suffixes(entry->pamptconfig_includes);
entry->pamptconfig_includes = pam_ptconfig_add_suffixes(includes);
if (!entry->pamptconfig_pam_ident_attr ||
(pam_ident_attr && PL_strcmp(entry->pamptconfig_pam_ident_attr, pam_ident_attr))) {
slapi_ch_free_string(&entry->pamptconfig_pam_ident_attr);
entry->pamptconfig_pam_ident_attr = pam_ident_attr;
pam_ident_attr = NULL; /* config now owns memory */
}
if (map_method) {
parse_map_method(map_method,
&entry->pamptconfig_map_method1,
&entry->pamptconfig_map_method2,
&entry->pamptconfig_map_method3,
NULL);
}
if (filter_str) {
entry->filter_str = filter_str;
filter_str = NULL; /* config now owns memory */
entry->slapi_filter = slapi_str2filter(entry->filter_str);
}
/* Add config to list. We just store at the tail. */
if (!PR_CLIST_IS_EMPTY(pam_passthru_global_config)) {
list = PR_LIST_HEAD(pam_passthru_global_config);
while (list != pam_passthru_global_config) {
list = PR_NEXT_LINK(list);
if (pam_passthru_global_config == list) {
/* add to tail */
PR_INSERT_BEFORE(&(entry->list), list);
slapi_log_err(SLAPI_LOG_CONFIG, PAM_PASSTHRU_PLUGIN_SUBSYSTEM,
"pam_passthru_apply_config - store [%s] at tail\n", entry->dn);
inserted = 1;
break;
}
}
} else {
/* first entry */
PR_INSERT_LINK(&(entry->list), pam_passthru_global_config);
slapi_log_err(SLAPI_LOG_CONFIG, PAM_PASSTHRU_PLUGIN_SUBSYSTEM,
"pam_passthru_apply_config - store [%s] at head \n", entry->dn);
inserted = 1;
}
bail:
if(!inserted){
pam_passthru_free_config_entry(&entry);
}
slapi_ch_free_string(&new_service);
slapi_ch_free_string(&map_method);
slapi_ch_free_string(&pam_ident_attr);
slapi_ch_free_string(&filter_str);
slapi_ch_array_free(excludes);
slapi_ch_array_free(includes);
return rc;
}
static SECStatus
get_blinding_params(RSAPrivateKey *key, mp_int *n, unsigned int modLen,
mp_int *f, mp_int *g)
{
SECStatus rv = SECSuccess;
mp_err err = MP_OKAY;
int cmp;
PRCList *el;
struct RSABlindingParamsStr *rsabp = NULL;
/* Init the list if neccessary (the init function is only called once!) */
if (blindingParamsList.lock == NULL) {
if (PR_CallOnce(&coBPInit, init_blinding_params_list) != PR_SUCCESS) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return SECFailure;
}
}
/* Acquire the list lock */
PZ_Lock(blindingParamsList.lock);
/* Walk the list looking for the private key */
for (el = PR_NEXT_LINK(&blindingParamsList.head);
el != &blindingParamsList.head;
el = PR_NEXT_LINK(el)) {
rsabp = (struct RSABlindingParamsStr *)el;
cmp = SECITEM_CompareItem(&rsabp->modulus, &key->modulus);
if (cmp == 0) {
/* Check the usage counter for the parameters */
if (--rsabp->counter <= 0) {
/* Regenerate the blinding parameters */
CHECK_SEC_OK( generate_blinding_params(rsabp, key, n, modLen) );
}
/* Return the parameters */
CHECK_MPI_OK( mp_copy(&rsabp->f, f) );
CHECK_MPI_OK( mp_copy(&rsabp->g, g) );
/* Now that the params are located, release the list lock. */
PZ_Unlock(blindingParamsList.lock); /* XXX when fails? */
return SECSuccess;
} else if (cmp > 0) {
/* The key is not in the list. Break to param creation. */
break;
}
}
/* At this point, the key is not in the list. el should point to the
** list element that this key should be inserted before. NOTE: the list
** lock is still held, so there cannot be a race condition here.
*/
rsabp = (struct RSABlindingParamsStr *)
PORT_ZAlloc(sizeof(struct RSABlindingParamsStr));
if (!rsabp) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
goto cleanup;
}
/* Initialize the list pointer for the element */
PR_INIT_CLIST(&rsabp->link);
/* Initialize the blinding parameters
** This ties up the list lock while doing some heavy, element-specific
** operations, but we don't want to insert the element until it is valid,
** which requires computing the blinding params. If this proves costly,
** it could be done after the list lock is released, and then if it fails
** the lock would have to be reobtained and the invalid element removed.
*/
rv = init_blinding_params(rsabp, key, n, modLen);
if (rv != SECSuccess) {
PORT_ZFree(rsabp, sizeof(struct RSABlindingParamsStr));
goto cleanup;
}
/* Insert the new element into the list
** If inserting in the middle of the list, el points to the link
** to insert before. Otherwise, the link needs to be appended to
** the end of the list, which is the same as inserting before the
** head (since el would have looped back to the head).
*/
PR_INSERT_BEFORE(&rsabp->link, el);
/* Return the parameters */
CHECK_MPI_OK( mp_copy(&rsabp->f, f) );
CHECK_MPI_OK( mp_copy(&rsabp->g, g) );
/* Release the list lock */
PZ_Unlock(blindingParamsList.lock); /* XXX when fails? */
return SECSuccess;
cleanup:
/* It is possible to reach this after the lock is already released.
** Ignore the error in that case.
*/
PZ_Unlock(blindingParamsList.lock);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return SECFailure;
}
