void ft_cpu_setup(void *blob, bd_t *bd)
{
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
int spridr = immr->sysconf.spridr;
/*
* delete crypto node if not on an E-processor
* initial revisions of the MPC834xE/6xE have the original SEC 2.0.
* EA revisions got the SEC uprevved to 2.4 but since the default device
* tree contains SEC 2.0 properties we uprev them here.
*/
if (!IS_E_PROCESSOR(spridr))
fdt_fixup_crypto_node(blob, 0);
else if (IS_E_PROCESSOR(spridr) &&
(SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
REVID_MAJOR(spridr) >= 2)
fdt_fixup_crypto_node(blob, 0x0204);
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
fdt_fixup_ethernet(blob);
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"timebase-frequency", (bd->bi_busfreq / 4), 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"clock-frequency", gd->core_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"clock-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"clock-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#if defined(CONFIG_BOOTCOUNT_LIMIT)
fdt_fixup_muram (blob);
#endif
}
void ft_board_setup(void *blob, bd_t *bd)
{
const immap_t *immr = (immap_t *)CFG_IMMR;
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
/*
* mpc8360ea pb mds errata 2: RGMII timing
* if on mpc8360ea rev. 2.1,
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
*/
if ((REVID_MAJOR(immr->sysconf.spridr) == 2) &&
(REVID_MINOR(immr->sysconf.spridr) == 1)) {
int nodeoffset;
const char *prop;
int path;
nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
#if defined(CONFIG_HAS_ETH0)
/* fixup UCC 1 if using rgmii-id mode */
prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_setprop(blob, path,
"phy-connection-type",
"rgmii-rxid",
sizeof("rgmii-rxid"));
}
#endif
#if defined(CONFIG_HAS_ETH1)
/* fixup UCC 2 if using rgmii-id mode */
prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_setprop(blob, path,
"phy-connection-type",
"rgmii-rxid",
sizeof("rgmii-rxid"));
}
#endif
}
}
}
int board_early_init_f(void)
{
u8 *bcsr = (u8 *)CFG_BCSR;
const immap_t *immr = (immap_t *)CFG_IMMR;
/* Enable flash write */
bcsr[0xa] &= ~0x04;
/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
if (REVID_MAJOR(immr->sysconf.spridr) == 2)
bcsr[0xe] = 0x30;
/* Enable second UART */
bcsr[0x9] &= ~0x01;
return 0;
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
int spridr = immr->sysconf.spridr;
/*
* delete crypto node if not on an E-processor
* initial revisions of the MPC834xE/6xE have the original SEC 2.0.
* EA revisions got the SEC uprevved to 2.4 but since the default device
* tree contains SEC 2.0 properties we uprev them here.
*/
if (!IS_E_PROCESSOR(spridr))
fdt_fixup_crypto_node(blob, 0);
else if (IS_E_PROCESSOR(spridr) &&
(SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
REVID_MAJOR(spridr) >= 2)
fdt_fixup_crypto_node(blob, 0x0204);
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
fdt_fixup_ethernet(blob);
#ifdef CONFIG_MPC8313
/*
* mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
* h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
* so if on Rev. 2 (and higher) h/w, we fix them up here
*/
if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
int nodeoffset, path;
const char *prop;
nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
#if defined(CONFIG_HAS_ETH0)
prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
if (prop) {
u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path, "interrupts",
NULL);
if (prop)
fdt_setprop(blob, path, "interrupts",
&tmp, sizeof(tmp));
}
#endif
#if defined(CONFIG_HAS_ETH1)
prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
if (prop) {
u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path, "interrupts",
NULL);
if (prop)
fdt_setprop(blob, path, "interrupts",
&tmp, sizeof(tmp));
}
#endif
}
}
#endif
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"timebase-frequency", (bd->bi_busfreq / 4), 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"clock-frequency", gd->arch.core_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"clock-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"clock-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
(defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
fdt_fixup_muram (blob);
#endif
}
