/**
* @brief This method processes an unsolicited frame while the task mgmt
* request is waiting for a response frame. It will copy the
* response data, release the unsolicited frame, and transition
* the request to the SCI_BASE_REQUEST_STATE_COMPLETED state.
*
* @param[in] this_request This parameter specifies the request for which
* the unsolicited frame was received.
* @param[in] frame_index This parameter indicates the unsolicited frame
* index that should contain the response.
*
* @return This method returns an indication of whether the TC response
* frame was handled successfully or not.
* @retval SCI_SUCCESS Currently this value is always returned and indicates
* successful processing of the TC response.
*
* @todo Should probably update to check frame type and make sure it is
* a response frame.
*/
static
SCI_STATUS scic_sds_ssp_task_request_await_tc_response_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
// Save off the controller, so that we do not touch the request after it
// is completed.
SCIC_SDS_CONTROLLER_T * owning_controller = this_request->owning_controller;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_TASK_MANAGEMENT,
"scic_sds_ssp_task_request_await_tc_response_frame_handler(0x%x, 0x%x) enter\n",
this_request, frame_index
));
scic_sds_io_request_copy_response(this_request);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
scic_sds_controller_release_frame(
owning_controller, frame_index
);
return SCI_SUCCESS;
}
/**
* This timer routine is used to allow the SCI User to rediscover or change
* device objects before a new series of link up notifications because a
* link down has allowed a better port configuration.
*
* @param[in] controller This is the core controller object which is used
* to obtain the port configuration agent.
*/
static
void scic_sds_mpc_agent_timeout_handler(
void * object
)
{
U8 index;
SCIC_SDS_CONTROLLER_T * controller = (SCIC_SDS_CONTROLLER_T *)object;
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent = &controller->port_agent;
U16 configure_phy_mask;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT,
"scic_sds_mpc_agent_timeout_handler(0x%08x) enter\n",
controller
));
port_agent->timer_pending = FALSE;
// Find the mask of phys that are reported read but as yet unconfigured into a port
configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
for (index = 0; index < SCI_MAX_PHYS; index++)
{
if (configure_phy_mask & (1 << index))
{
port_agent->link_up_handler(
controller,
port_agent,
scic_sds_phy_get_port(&controller->phy_table[index]),
&controller->phy_table[index]
);
}
}
}
/**
* @brief This method is responsible for processing a terminate/abort
* request for this TC while the request is waiting for the task
* management response unsolicited frame.
*
* @param[in] this_request This parameter specifies the request for which
* the termination was requested.
*
* @return This method returns an indication as to whether the abort
* request was successfully handled.
*
* @todo need to update to ensure the received UF doesn't cause damage
* to subsequent requests (i.e. put the extended tag in a holding
* pattern for this particular device).
*/
static
SCI_STATUS scic_sds_ssp_task_request_await_tc_response_abort_handler(
SCI_BASE_REQUEST_T * request
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_TASK_MANAGEMENT,
"scic_sds_ssp_task_request_await_tc_response_abort_handler(0x%x) enter\n",
this_request
));
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_ABORTING
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
return SCI_SUCCESS;
}
/**
* This method handles the manual port configuration link up notifications.
* Since all ports and phys are associate at initialization time we just turn
* around and notifiy the port object that there is a link up. If this PHY is
* not associated with a port there is no action taken.
*
* @param[in] controller This is the controller object that receives the
* link up notification.
* @param[in] port This is the port object associated with the phy. If the
* is no associated port this is an SCI_INVALID_HANDLE.
* @param[in] phy This is the phy object which has gone ready.
*
* @note Is it possible to get a link up notification from a phy that has
* no assocoated port?
*/
static
void scic_sds_mpc_agent_link_up(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent,
SCIC_SDS_PORT_T * port,
SCIC_SDS_PHY_T * phy
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT | SCIC_LOG_OBJECT_PHY,
"scic_sds_mpc_agent_link_up(0x%08x, 0x%08x, 0x%08x, 0x%08x) enter\n",
controller, port_agent, port, phy
));
// If the port has an invalid handle then the phy was not assigned to
// a port. This is because the phy was not given the same SAS Address
// as the other PHYs in the port.
if (port != SCI_INVALID_HANDLE)
{
port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy));
scic_sds_port_link_up(port, phy);
if ((port->active_phy_mask & (1 << scic_sds_phy_get_index(phy))) != 0)
{
port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(phy));
}
}
}
/**
* This method handles the automatic port configuration link down notifications.
* If this PHY is * not associated with a port there is no action taken.
*
* @param[in] controller This is the controller object that receives the
* link down notification.
* @param[in] port This is the port object associated with the phy. If the
* is no associated port this is an SCI_INVALID_HANDLE.
* @param[in] phy This is the phy object which has gone link down.
*
* @note Is it possible to get a link down notification from a phy that has
* no assocoated port?
*/
static
void scic_sds_apc_agent_link_down(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent,
SCIC_SDS_PORT_T * port,
SCIC_SDS_PHY_T * phy
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT | SCIC_LOG_OBJECT_PHY,
"scic_sds_apc_agent_link_down(0x%08x, 0x%08x, 0x%08x, 0x%08x) enter\n",
controller, port_agent, port, phy
));
port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy));
if (port != SCI_INVALID_HANDLE)
{
if (port_agent->phy_configured_mask & (1 << phy->phy_index))
{
SCI_STATUS status;
status = scic_sds_port_remove_phy(port, phy);
if (status == SCI_SUCCESS)
{
port_agent->phy_configured_mask &= ~(1 << phy->phy_index);
}
}
}
}
/**
* @brief This method is called by the SCI user to build an SMP pass-through
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_smp_request This parameter specifies the handle to the
* io request object to be built.
*
* @param[in] passthru_cb This parameter specifies the pointer to the callback
* structure that contains the function pointers
*
* @return Indicate if the controller successfully built the IO request.
*/
SCI_STATUS scic_io_request_construct_smp_pass_through(
SCI_IO_REQUEST_HANDLE_T scic_smp_request,
SCIC_SMP_PASSTHRU_REQUEST_CALLBACKS_T *passthru_cb
)
{
SMP_REQUEST_T smp_request;
U8 * request_buffer;
U32 request_buffer_length_in_bytes;
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *) scic_smp_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scic_io_request_construct_smp_pass_through(0x%x) enter\n",
this_request
));
this_request->protocol = SCIC_SMP_PROTOCOL;
this_request->has_started_substate_machine = TRUE;
// Call the callback function to retrieve the SMP passthrough request
request_buffer_length_in_bytes = passthru_cb->scic_cb_smp_passthru_get_request (
(void *)this_request,
&request_buffer
);
//copy the request to smp request
memcpy((char *)&smp_request.request.vendor_specific_request,
request_buffer,
request_buffer_length_in_bytes);
//the header length in smp_request is in dwords - the sas spec has similar way,
//but the csmi header contains the number of bytes, so we need to convert the
//number of bytes to number of dwords
smp_request.header.request_length = (U8) (request_buffer_length_in_bytes / sizeof (U32));
//Grab the other needed fields from the smp request using callbacks
smp_request.header.smp_frame_type = passthru_cb->scic_cb_smp_passthru_get_frame_type ((void *)this_request);
smp_request.header.function = passthru_cb->scic_cb_smp_passthru_get_function ((void *)this_request);
smp_request.header.allocated_response_length = passthru_cb->scic_cb_smp_passthru_get_allocated_response_length((void *)this_request);
// Construct the started sub-state machine.
sci_base_state_machine_construct(
&this_request->started_substate_machine,
&this_request->parent.parent,
scic_sds_smp_request_started_substate_table,
SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE
);
// Construct the SMP SCU Task Context
scu_smp_request_construct_task_context (this_request, &smp_request);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
return SCI_SUCCESS;
}
/**
* This method will construct the port configuration agent for this controller.
*
* @param[in] controller This is the controller object for which the port
* agent is being initialized.
*
* @param[in] port_agent This is the port configuration agent that is being
* initialized. The initialization path is handled differntly
* for the automatic port configuration agent and the manual port
* configuration agent.
*
* @return
*/
SCI_STATUS scic_sds_port_configuration_agent_initialize(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent
)
{
SCI_STATUS status = SCI_SUCCESS;
enum SCIC_PORT_CONFIGURATION_MODE mode;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT,
"scic_sds_port_configuration_agent_initialize(0x%08x, 0x%08x) enter\n",
controller, port_agent
));
mode = controller->oem_parameters.sds1.controller.mode_type;
if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE)
{
status = scic_sds_mpc_agent_validate_phy_configuration(controller, port_agent);
port_agent->link_up_handler = scic_sds_mpc_agent_link_up;
port_agent->link_down_handler = scic_sds_mpc_agent_link_down;
port_agent->timer = scic_cb_timer_create(
controller,
scic_sds_mpc_agent_timeout_handler,
controller
);
}
else
{
status = scic_sds_apc_agent_validate_phy_configuration(controller, port_agent);
port_agent->link_up_handler = scic_sds_apc_agent_link_up;
port_agent->link_down_handler = scic_sds_apc_agent_link_down;
port_agent->timer = scic_cb_timer_create(
controller,
scic_sds_apc_agent_timeout_handler,
controller
);
}
// Make sure we have actually gotten a timer
if (status == SCI_SUCCESS && port_agent->timer == NULL)
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER,
"Controller 0x%x automatic port configuration agent could not get timer.\n",
controller
));
status = SCI_FAILURE;
}
return status;
}
/**
* This routine will verify that the phys are assigned a valid SAS address for
* automatic port configuration mode.
*/
static
SCI_STATUS scic_sds_apc_agent_validate_phy_configuration(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent
)
{
U8 phy_index;
U8 port_index;
SCI_SAS_ADDRESS_T sas_address;
SCI_SAS_ADDRESS_T phy_assigned_address;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT,
"scic_sds_apc_agent_validate_phy_configuration(0x%08x, 0x%08x) enter\n",
controller, port_agent
));
phy_index = 0;
while (phy_index < SCI_MAX_PHYS)
{
port_index = phy_index;
// Get the assigned SAS Address for the first PHY on the controller.
scic_sds_phy_get_sas_address(
&controller->phy_table[phy_index], &sas_address
);
while (++phy_index < SCI_MAX_PHYS)
{
scic_sds_phy_get_sas_address(
&controller->phy_table[phy_index], &phy_assigned_address
);
// Verify each of the SAS address are all the same for every PHY
if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0)
{
port_agent->phy_valid_port_range[phy_index].min_index = port_index;
port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
}
else
{
port_agent->phy_valid_port_range[phy_index].min_index = phy_index;
port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
break;
}
}
}
return scic_sds_port_configuration_agent_validate_ports(controller, port_agent);
}
/**
* This routine will try to configure the phys into ports when the timer fires.
*
* @param[in] object This is actually the controller that needs to have the
* pending phys configured.
*/
static
void scic_sds_apc_agent_timeout_handler(
void * object
)
{
U32 index;
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent;
SCIC_SDS_CONTROLLER_T * controller = (SCIC_SDS_CONTROLLER_T *)object;
U16 configure_phy_mask;
port_agent = scic_sds_controller_get_port_configuration_agent(controller);
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT,
"scic_sds_apc_agent_timeout_handler(0x%08x) enter\n",
controller
));
port_agent->timer_pending = FALSE;
configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
if (configure_phy_mask != 0x00)
{
for (index = 0; index < SCI_MAX_PHYS; index++)
{
if (configure_phy_mask & (1 << index))
{
scic_sds_apc_agent_configure_ports(
controller, port_agent, &controller->phy_table[index], FALSE
);
}
}
//Notify the controller ports are configured.
if (
(port_agent->phy_ready_mask == port_agent->phy_configured_mask) &&
(controller->next_phy_to_start == SCI_MAX_PHYS) &&
(controller->phy_startup_timer_pending == FALSE)
)
{
// The controller has successfully finished the start process.
// Inform the SCI Core user and transition to the READY state.
if (scic_sds_controller_is_start_complete(controller) == TRUE)
{
scic_sds_controller_port_agent_configured_ports(controller);
}
}
}
}
/**
* This routine will find a matching port for the phy. This means that the
* port and phy both have the same broadcast sas address and same received
* sas address.
*
* @param[in] controller The controller object used for the port search.
* @param[in] phy The phy object to match.
*
* @return The port address or the SCI_INVALID_HANDLE if there is no matching
* port.
*
* @retvalue port address if the port can be found to match the phy.
* @retvalue SCI_INVALID_HANDLE if there is no matching port for the phy.
*/
static
SCIC_SDS_PORT_T * scic_sds_port_configuration_agent_find_port(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PHY_T * phy
)
{
U8 port_index;
SCI_PORT_HANDLE_T port_handle;
SCI_SAS_ADDRESS_T port_sas_address;
SCI_SAS_ADDRESS_T port_attached_device_address;
SCI_SAS_ADDRESS_T phy_sas_address;
SCI_SAS_ADDRESS_T phy_attached_device_address;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT | SCIC_LOG_OBJECT_PHY,
"scic_sds_port_confgiruation_agent_find_port(0x%08x, 0x%08x) enter\n",
controller, phy
));
// Since this phy can be a member of a wide port check to see if one or
// more phys match the sent and received SAS address as this phy in which
// case it should participate in the same port.
scic_sds_phy_get_sas_address(phy, &phy_sas_address);
scic_sds_phy_get_attached_sas_address(phy, &phy_attached_device_address);
for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++)
{
if (scic_controller_get_port_handle(controller, port_index, &port_handle) == SCI_SUCCESS)
{
SCIC_SDS_PORT_T * port = (SCIC_SDS_PORT_T *)port_handle;
scic_sds_port_get_sas_address(port, &port_sas_address);
scic_sds_port_get_attached_sas_address(port, &port_attached_device_address);
if (
(sci_sas_address_compare(port_sas_address, phy_sas_address) == 0)
&& (sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0)
)
{
return port;
}
}
}
return SCI_INVALID_HANDLE;
}
/**
* This method handles the manual port configuration link down notifications.
* Since all ports and phys are associated at initialization time we just turn
* around and notifiy the port object of the link down event. If this PHY is
* not associated with a port there is no action taken.
*
* @param[in] controller This is the controller object that receives the
* link down notification.
* @param[in] port This is the port object associated with the phy. If the
* is no associated port this is an SCI_INVALID_HANDLE. The port
* is an invalid handle only if the phy was never port of this
* port. This happens when the phy is not broadcasting the same
* SAS address as the other phys in the assigned port.
* @param[in] phy This is the phy object which has gone link down.
*
* @note Is it possible to get a link down notification from a phy that has
* no assocoated port?
*/
static
void scic_sds_mpc_agent_link_down(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent,
SCIC_SDS_PORT_T * port,
SCIC_SDS_PHY_T * phy
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT | SCIC_LOG_OBJECT_PHY,
"scic_sds_mpc_agent_link_down(0x%08x, 0x%08x, 0x%08x, 0x%08x) enter\n",
controller, port_agent, port, phy
));
if (port != SCI_INVALID_HANDLE)
{
// If we can form a new port from the remainder of the phys then we want
// to start the timer to allow the SCI User to cleanup old devices and
// rediscover the port before rebuilding the port with the phys that
// remain in the ready state.
port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy));
port_agent->phy_configured_mask &= ~(1 << scic_sds_phy_get_index(phy));
// Check to see if there are more phys waiting to be configured into a port.
// If there are allow the SCI User to tear down this port, if necessary, and
// then reconstruc the port after the timeout.
if (
(port_agent->phy_configured_mask == 0x0000)
&& (port_agent->phy_ready_mask != 0x0000)
&& !port_agent->timer_pending
)
{
port_agent->timer_pending = TRUE;
scic_cb_timer_start(
controller,
port_agent->timer,
SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT
);
}
scic_sds_port_link_down(port, phy);
}
}
/**
* This method handles the automatic port configuration for link up notifications.
*
* @param[in] controller This is the controller object that receives the
* link up notification.
* @param[in] port This is the port object associated with the phy. If the
* is no associated port this is an SCI_INVALID_HANDLE.
* @param[in] phy This is the phy object which has gone link up.
*
* @note Is it possible to get a link down notification from a phy that has
* no assocoated port?
*/
static
void scic_sds_apc_agent_link_up(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent,
SCIC_SDS_PORT_T * port,
SCIC_SDS_PHY_T * phy
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT | SCIC_LOG_OBJECT_PHY,
"scic_sds_apc_agent_link_up(0x%08x, 0x%08x, 0x%08x, 0x%08x) enter\n",
controller, port_agent, port, phy
));
//the phy is not the part of this port, configure the port with this phy
if (port == SCI_INVALID_HANDLE)
{
port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy));
scic_sds_apc_agent_start_timer(
controller, port_agent, phy, SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION
);
}
else
{
//the phy is already the part of the port
//if the PORT'S state is resetting then the link up is from port hard reset
//in this case, we need to tell the port that link up is recieved
if ( SCI_BASE_PORT_STATE_RESETTING
== port->parent.state_machine.current_state_id
)
{
//notify the port that port needs to be ready
port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy));
scic_sds_port_link_up(port, phy);
}
else
{
ASSERT (0);
}
}
}
/**
* @brief This method processes the completions transport layer (TL) status
* to determine if the SMP request was sent successfully. If the SMP
* request was sent successfully, then the state for the SMP request
* transits to waiting for a response frame.
*
* @param[in] this_request This parameter specifies the request for which
* the TC completion was received.
* @param[in] completion_code This parameter indicates the completion status
* information for the TC.
*
* @return Indicate if the tc completion handler was successful.
* @retval SCI_SUCCESS currently this method always returns success.
*/
static
SCI_STATUS scic_sds_smp_request_await_tc_completion_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scic_sds_smp_request_await_tc_completion_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return SCI_SUCCESS;
}
/**
* @brief This method release resources in for a scic port configuration agent.
*
* @param[in] controller This parameter specifies the core controller, one of
* its phy's resources are to be released.
* @param[in] this_phy This parameter specifies the phy whose resource is to
* be released.
*/
void scic_sds_port_configuration_agent_release_resource(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_PORT,
"scic_sds_port_configuration_agent_release_resource(0x%x, 0x%x)\n",
controller, port_agent
));
//Currently, the only resource to be released is a timer.
if (port_agent->timer != NULL)
{
scic_cb_timer_destroy(controller, port_agent->timer);
port_agent->timer = NULL;
}
}
/**
* This routine will restart the automatic port configuration timeout
* timer for the next time period. This could be caused by either a
* link down event or a link up event where we can not yet tell to which
* port a phy belongs.
*
* @param[in] controller This is the controller that to which the port
* agent is assigned.
* @param[in] port_agent This is the port agent that is requesting the
* timer start operation.
* @param[in] phy This is the phy that has caused the timer operation to
* be scheduled.
* @param[in] timeout This is the timeout in ms.
*/
static
void scic_sds_apc_agent_start_timer(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent,
SCIC_SDS_PHY_T * phy,
U32 timeout
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT | SCIC_LOG_OBJECT_PHY,
"scic_sds_apc_agent_start_timer(0x%08x, 0x%08x, 0x%08x, 0x%08x) enter\n",
controller, port_agent, phy, timeout
));
if (port_agent->timer_pending)
{
scic_cb_timer_stop(controller, port_agent->timer);
}
port_agent->timer_pending = TRUE;
scic_cb_timer_start(controller, port_agent->timer, timeout);
}
/**
* @brief This method is called by the SCI user to build an SMP
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
* @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned if the
* remote_device does not support the SMP protocol.
* @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the
* user did not properly set the association between the SCIC IO
* request and the user's IO request. Please refer to the
* sci_object_set_association() routine for more
* information.
*/
SCI_STATUS scic_io_request_construct_smp(
SCI_IO_REQUEST_HANDLE_T scic_smp_request
)
{
SMP_REQUEST_T smp_request;
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *) scic_smp_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scic_io_request_construct_smp(0x%x) enter\n",
this_request
));
this_request->protocol = SCIC_SMP_PROTOCOL;
this_request->has_started_substate_machine = TRUE;
// Construct the started sub-state machine.
sci_base_state_machine_construct(
&this_request->started_substate_machine,
&this_request->parent.parent,
scic_sds_smp_request_started_substate_table,
SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE
);
// Construct the SMP SCU Task Context
memcpy((char *)&smp_request,
this_request->command_buffer,
sizeof(SMP_REQUEST_T));
// Look at the SMP requests' header fields; for certain SAS 1.x SMP
// functions under SAS 2.0, a zero request length really indicates
// a non-zero default length.
if( smp_request.header.request_length == 0 )
{
switch( smp_request.header.function )
{
case SMP_FUNCTION_DISCOVER:
case SMP_FUNCTION_REPORT_PHY_ERROR_LOG:
case SMP_FUNCTION_REPORT_PHY_SATA:
case SMP_FUNCTION_REPORT_ROUTE_INFORMATION:
smp_request.header.request_length = 2;
break;
case SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION:
case SMP_FUNCTION_PHY_CONTROL:
case SMP_FUNCTION_PHY_TEST:
smp_request.header.request_length = 9;
break;
// Default - zero is a valid default for 2.0.
}
}
scu_smp_request_construct_task_context(
this_request,
&smp_request
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
return SCI_SUCCESS;
}
/**
* @brief This method will fill in the SCU Task Context for a SMP request. The
* following important settings are utilized:
*
* -# task_type == SCU_TASK_TYPE_SMP. This simply indicates
* that a normal request type (i.e. non-raw frame) is being
* utilized to perform task management.
* -# control_frame == 1. This ensures that the proper endianess
* is set so that the bytes are transmitted in the right order
* for a smp request frame.
*
* @param[in] this_request This parameter specifies the smp request object
* being constructed.
*
* @return none
*/
void scu_smp_request_construct_task_context(
SCIC_SDS_REQUEST_T *this_request,
SMP_REQUEST_T *smp_request
)
{
SCI_PHYSICAL_ADDRESS physical_address;
SCIC_SDS_CONTROLLER_T *owning_controller;
SCIC_SDS_REMOTE_DEVICE_T *target_device;
SCIC_SDS_PORT_T *target_port;
SCU_TASK_CONTEXT_T *task_context;
//byte swap the smp request.
scic_word_copy_with_swap(
this_request->command_buffer,
(U32*) smp_request,
sizeof(SMP_REQUEST_T)/sizeof(U32)
);
task_context = scic_sds_request_get_task_context(this_request);
owning_controller = scic_sds_request_get_controller(this_request);
target_device = scic_sds_request_get_device(this_request);
target_port = scic_sds_request_get_port(this_request);
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scu_smp_request_construct_task_context(0x%x) contents\n"
" reqlen=%x; function=%x;\n",
this_request,
smp_request->header.request_length,
smp_request->header.function
));
// Fill in the TC with the its required data
// 00h
task_context->priority = 0;
task_context->initiator_request = 1;
task_context->connection_rate =
scic_remote_device_get_connection_rate(target_device);
task_context->protocol_engine_index =
scic_sds_controller_get_protocol_engine_group(owning_controller);
task_context->logical_port_index =
scic_sds_port_get_index(target_port);
task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP;
task_context->abort = 0;
task_context->valid = SCU_TASK_CONTEXT_VALID;
task_context->context_type = SCU_TASK_CONTEXT_TYPE;
//04h
task_context->remote_node_index = this_request->target_device->rnc->remote_node_index;
task_context->command_code = 0;
task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST;
//08h
task_context->link_layer_control = 0;
task_context->do_not_dma_ssp_good_response = 1;
task_context->strict_ordering = 0;
task_context->control_frame = 1;
task_context->timeout_enable = 0;
task_context->block_guard_enable = 0;
//0ch
task_context->address_modifier = 0;
//10h
task_context->ssp_command_iu_length = smp_request->header.request_length;
//14h
task_context->transfer_length_bytes = 0;
//18h ~ 30h, protocol specific
// since commandIU has been build by framework at this point, we just
// copy the frist DWord from command IU to this location.
memcpy((void *)(&task_context->type.smp), this_request->command_buffer, sizeof(U32) );
//40h
// "For SMP you could program it to zero. We would prefer that way so that
// done code will be consistent." - Venki
task_context->task_phase = 0;
if (this_request->was_tag_assigned_by_user)
{
// Build the task context now since we have already read the data
this_request->post_context = (
SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC
| (
scic_sds_controller_get_protocol_engine_group(owning_controller)
<< SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT
)
| (
scic_sds_port_get_index(target_port)
<< SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT
)
| scic_sds_io_tag_get_index(this_request->io_tag)
);
}
else
{
// Build the task context now since we have already read the data
this_request->post_context = (
SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC
| (
scic_sds_controller_get_protocol_engine_group(owning_controller)
<< SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT
)
| (
scic_sds_port_get_index(target_port)
<< SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT
)
// This is not assigned because we have to wait until we get a TCi
);
}
// Copy the physical address for the command buffer to the SCU Task Context
// command buffer should not contain command header.
scic_cb_io_request_get_physical_address(
scic_sds_request_get_controller(this_request),
this_request,
((char *)(this_request->command_buffer) + sizeof(U32)),
&physical_address
);
task_context->command_iu_upper =
sci_cb_physical_address_upper(physical_address);
task_context->command_iu_lower =
sci_cb_physical_address_lower(physical_address);
//SMP response comes as UF, so no need to set response IU address.
task_context->response_iu_upper = 0;
task_context->response_iu_lower = 0;
}
/**
* This method handles the automatic port configuration for link up notifications.
*
* @param[in] controller This is the controller object that receives the
* link up notification.
* @param[in] phy This is the phy object which has gone link up.
* @param[in] start_timer This tells the routine if it should start the timer for
* any phys that might be added to a port in the future.
*/
static
void scic_sds_apc_agent_configure_ports(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent,
SCIC_SDS_PHY_T * phy,
BOOL start_timer
)
{
U8 port_index;
SCI_STATUS status;
SCIC_SDS_PORT_T * port;
SCI_PORT_HANDLE_T port_handle;
enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT | SCIC_LOG_OBJECT_PHY,
"scic_sds_apc_agent_configure_ports(0x%08x, 0x%08x, 0x%08x, %d) enter\n",
controller, port_agent, phy, start_timer
));
port = scic_sds_port_configuration_agent_find_port(controller, phy);
if (port != SCI_INVALID_HANDLE)
{
if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index))
apc_activity = SCIC_SDS_APC_ADD_PHY;
else
apc_activity = SCIC_SDS_APC_SKIP_PHY;
}
else
{
// There is no matching Port for this PHY so lets search through the
// Ports and see if we can add the PHY to its own port or maybe start
// the timer and wait to see if a wider port can be made.
//
// Note the break when we reach the condition of the port id == phy id
for (
port_index = port_agent->phy_valid_port_range[phy->phy_index].min_index;
port_index <= port_agent->phy_valid_port_range[phy->phy_index].max_index;
port_index++
)
{
scic_controller_get_port_handle(controller, port_index, &port_handle);
port = (SCIC_SDS_PORT_T *)port_handle;
// First we must make sure that this PHY can be added to this Port.
if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index))
{
// Port contains a PHY with a greater PHY ID than the current
// PHY that has gone link up. This phy can not be part of any
// port so skip it and move on.
if (port->active_phy_mask > (1 << phy->phy_index))
{
apc_activity = SCIC_SDS_APC_SKIP_PHY;
break;
}
// We have reached the end of our Port list and have not found
// any reason why we should not either add the PHY to the port
// or wait for more phys to become active.
if (port->physical_port_index == phy->phy_index)
{
// The Port either has no active PHYs.
// Consider that if the port had any active PHYs we would have
// or active PHYs with
// a lower PHY Id than this PHY.
if (apc_activity != SCIC_SDS_APC_START_TIMER)
{
apc_activity = SCIC_SDS_APC_ADD_PHY;
}
break;
}
// The current Port has no active PHYs and this PHY could be part
// of this Port. Since we dont know as yet setup to start the
// timer and see if there is a better configuration.
if (port->active_phy_mask == 0)
{
apc_activity = SCIC_SDS_APC_START_TIMER;
}
}
else if (port->active_phy_mask != 0)
{
// The Port has an active phy and the current Phy can not
// participate in this port so skip the PHY and see if
// there is a better configuration.
apc_activity = SCIC_SDS_APC_SKIP_PHY;
}
}
}
// Check to see if the start timer operations should instead map to an
// add phy operation. This is caused because we have been waiting to
// add a phy to a port but could not becuase the automatic port
// configuration engine had a choice of possible ports for the phy.
// Since we have gone through a timeout we are going to restrict the
// choice to the smallest possible port.
if (
(start_timer == FALSE)
&& (apc_activity == SCIC_SDS_APC_START_TIMER)
)
{
apc_activity = SCIC_SDS_APC_ADD_PHY;
}
switch (apc_activity)
{
case SCIC_SDS_APC_ADD_PHY:
status = scic_sds_port_add_phy(port, phy);
if (status == SCI_SUCCESS)
{
port_agent->phy_configured_mask |= (1 << phy->phy_index);
}
break;
case SCIC_SDS_APC_START_TIMER:
scic_sds_apc_agent_start_timer(
controller, port_agent, phy, SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION
);
break;
case SCIC_SDS_APC_SKIP_PHY:
default:
// do nothing the PHY can not be made part of a port at this time.
break;
}
}
/**
* @brief This method processes an unsolicited frame while the SMP request is
* waiting for a response frame. It will copy the response data, release
* the unsolicited frame, and transition the request to the
* SCI_BASE_REQUEST_STATE_COMPLETED state.
*
* @param[in] this_request This parameter specifies the request for which
* the unsolicited frame was received.
* @param[in] frame_index This parameter indicates the unsolicited frame
* index that should contain the response.
*
* @return This method returns an indication of whether the response
* frame was handled successfully or not.
* @retval SCI_SUCCESS Currently this value is always returned and indicates
* successful processing of the TC response.
*/
static
SCI_STATUS scic_sds_smp_request_await_response_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
SCI_STATUS status;
void * frame_header;
SMP_RESPONSE_HEADER_T * this_frame_header;
U8 * user_smp_buffer = this_request->response_buffer;
// Save off the controller, so that we do not touch the request after it
// is completed.
SCIC_SDS_CONTROLLER_T * controller = scic_sds_request_get_controller(this_request);
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scic_sds_smp_request_await_response_frame_handler(0x%x, 0x%x) enter\n",
this_request, frame_index
));
status = scic_sds_unsolicited_frame_control_get_header(
&(controller->uf_control),
frame_index,
&frame_header
);
//byte swap the header.
scic_word_copy_with_swap(
(U32*) user_smp_buffer,
frame_header,
sizeof(SMP_RESPONSE_HEADER_T)/sizeof(U32)
);
this_frame_header = (SMP_RESPONSE_HEADER_T*) user_smp_buffer;
if (this_frame_header->smp_frame_type == SMP_FRAME_TYPE_RESPONSE)
{
void * smp_response_buffer;
status = scic_sds_unsolicited_frame_control_get_buffer(
&(controller->uf_control),
frame_index,
&smp_response_buffer
);
scic_word_copy_with_swap(
(U32*) (user_smp_buffer + sizeof(SMP_RESPONSE_HEADER_T)),
smp_response_buffer,
sizeof(SMP_RESPONSE_BODY_T)/sizeof(U32)
);
if (this_frame_header->function == SMP_FUNCTION_DISCOVER)
{
SMP_RESPONSE_T * this_smp_response;
this_smp_response = (SMP_RESPONSE_T *)user_smp_buffer;
// Some expanders only report an attached SATA device, and
// not an STP target. Since the core depends on the STP
// target attribute to correctly build I/O, set the bit now
// if necessary.
if (this_smp_response->response.discover.protocols.u.bits.attached_sata_device
&& !this_smp_response->response.discover.protocols.u.bits.attached_stp_target)
{
this_smp_response->response.discover.protocols.u.bits.attached_stp_target = 1;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scic_sds_smp_request_await_response_frame_handler(0x%x) Found SATA dev, setting STP bit.\n",
this_request
));
}
}
//Don't need to copy to user space. User instead will refer to
//core request's response buffer.
//copy the smp response to framework smp request's response buffer.
//scic_sds_smp_request_copy_response(this_request);
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION
);
}
else
{
// This was not a response frame why did it get forwarded?
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"SCIC SMP Request 0x%08x received unexpected frame %d type 0x%02x\n",
this_request, frame_index, this_frame_header->smp_frame_type
));
scic_sds_request_set_status(
this_request,
SCU_TASK_DONE_SMP_FRM_TYPE_ERR,
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
}
scic_sds_controller_release_frame(
controller, frame_index
);
return SCI_SUCCESS;
}
/**
* @brief This method processes an abnormal TC completion while the SMP
* request is waiting for a response frame. It decides what
* happened to the IO based on TC completion status.
*
* @param[in] this_request This parameter specifies the request for which
* the TC completion was received.
* @param[in] completion_code This parameter indicates the completion status
* information for the TC.
*
* @return Indicate if the tc completion handler was successful.
* @retval SCI_SUCCESS currently this method always returns success.
*/
static
SCI_STATUS scic_sds_smp_request_await_response_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scic_sds_smp_request_await_response_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
//In the AWAIT RESPONSE state, any TC completion is unexpected.
//but if the TC has success status, we complete the IO anyway.
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
//These status has been seen in a specific LSI expander, which sometimes
//is not able to send smp response within 2 ms. This causes our hardware
//break the connection and set TC completion with one of these SMP_XXX_XX_ERR
//status. For these type of error, we ask scic user to retry the request.
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return SCI_SUCCESS;
}
/**
* This routine will verify that all of the phys in the same port are using
* the same SAS address.
*
* @param[in] controller This is the controller that contains the PHYs to
* be verified.
*/
static
SCI_STATUS scic_sds_mpc_agent_validate_phy_configuration(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent
)
{
U32 phy_mask;
U32 assigned_phy_mask;
SCI_SAS_ADDRESS_T sas_address;
SCI_SAS_ADDRESS_T phy_assigned_address;
U8 port_index;
U8 phy_index;
assigned_phy_mask = 0;
sas_address.high = 0;
sas_address.low = 0;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT,
"scic_sds_mpc_agent_validate_phy_configuration(0x%08x, 0x%08x) enter\n",
controller, port_agent
));
for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++)
{
phy_mask = controller->oem_parameters.sds1.ports[port_index].phy_mask;
if (phy_mask != 0)
{
// Make sure that one or more of the phys were not already assinged to
// a different port.
if ((phy_mask & ~assigned_phy_mask) == 0)
{
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
// Find the starting phy index for this round through the loop
for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++)
{
if ((1 << phy_index) & phy_mask)
{
scic_sds_phy_get_sas_address(
&controller->phy_table[phy_index], &sas_address
);
// The phy_index can be used as the starting point for the
// port range since the hardware starts all logical ports
// the same as the PE index.
port_agent->phy_valid_port_range[phy_index].min_index = port_index;
port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
if (phy_index != port_index)
{
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
break;
}
}
// See how many additional phys are being added to this logical port.
// Note: We have not moved the current phy_index so we will actually
// compare the startting phy with itself.
// This is expected and required to add the phy to the port.
while (phy_index < SCI_MAX_PHYS)
{
if ((1 << phy_index) & phy_mask)
{
scic_sds_phy_get_sas_address(
&controller->phy_table[phy_index], &phy_assigned_address
);
if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0)
{
// The phy mask specified that this phy is part of the same port
// as the starting phy and it is not so fail this configuration
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
port_agent->phy_valid_port_range[phy_index].min_index = port_index;
port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
scic_sds_port_add_phy(
&controller->port_table[port_index],
&controller->phy_table[phy_index]
);
assigned_phy_mask |= (1 << phy_index);
}
phy_index++;
}
}
}
return scic_sds_port_configuration_agent_validate_ports(controller, port_agent);
}
/**
* This routine will validate the port configuration is correct for the SCU
* hardware. The SCU hardware allows for port configurations as follows.
* LP0 -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3)
* LP1 -> (PE1)
* LP2 -> (PE2), (PE2, PE3)
* LP3 -> (PE3)
*
* @param[in] controller This is the controller object that contains the
* port agent
* @param[in] port_agent This is the port configruation agent for
* the controller.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS the port configuration is valid for this
* port configuration agent.
* @retval SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION the port configuration
* is not valid for this port configuration agent.
*/
static
SCI_STATUS scic_sds_port_configuration_agent_validate_ports(
SCIC_SDS_CONTROLLER_T * controller,
SCIC_SDS_PORT_CONFIGURATION_AGENT_T * port_agent
)
{
#if !defined(ARLINGTON_BUILD)
SCI_SAS_ADDRESS_T first_address;
SCI_SAS_ADDRESS_T second_address;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
SCIC_LOG_OBJECT_CONTROLLER | SCIC_LOG_OBJECT_PORT,
"scic_sds_port_configuration_agent_validate_ports(0x%08x, 0x%08x) enter\n",
controller, port_agent
));
// Sanity check the max ranges for all the phys the max index
// is always equal to the port range index
if (
(port_agent->phy_valid_port_range[0].max_index != 0)
|| (port_agent->phy_valid_port_range[1].max_index != 1)
|| (port_agent->phy_valid_port_range[2].max_index != 2)
|| (port_agent->phy_valid_port_range[3].max_index != 3)
)
{
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
// This is a request to configure a single x4 port or at least attempt
// to make all the phys into a single port
if (
(port_agent->phy_valid_port_range[0].min_index == 0)
&& (port_agent->phy_valid_port_range[1].min_index == 0)
&& (port_agent->phy_valid_port_range[2].min_index == 0)
&& (port_agent->phy_valid_port_range[3].min_index == 0)
)
{
return SCI_SUCCESS;
}
// This is a degenerate case where phy 1 and phy 2 are assigned
// to the same port this is explicitly disallowed by the hardware
// unless they are part of the same x4 port and this condition was
// already checked above.
if (port_agent->phy_valid_port_range[2].min_index == 1)
{
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
// PE0 and PE3 can never have the same SAS Address unless they
// are part of the same x4 wide port and we have already checked
// for this condition.
scic_sds_phy_get_sas_address(&controller->phy_table[0], &first_address);
scic_sds_phy_get_sas_address(&controller->phy_table[3], &second_address);
if (sci_sas_address_compare(first_address, second_address) == 0)
{
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
// PE0 and PE1 are configured into a 2x1 ports make sure that the
// SAS Address for PE0 and PE2 are different since they can not be
// part of the same port.
if (
(port_agent->phy_valid_port_range[0].min_index == 0)
&& (port_agent->phy_valid_port_range[1].min_index == 1)
)
{
scic_sds_phy_get_sas_address(&controller->phy_table[0], &first_address);
scic_sds_phy_get_sas_address(&controller->phy_table[2], &second_address);
if (sci_sas_address_compare(first_address, second_address) == 0)
{
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
}
// PE2 and PE3 are configured into a 2x1 ports make sure that the
// SAS Address for PE1 and PE3 are different since they can not be
// part of the same port.
if (
(port_agent->phy_valid_port_range[2].min_index == 2)
&& (port_agent->phy_valid_port_range[3].min_index == 3)
)
{
scic_sds_phy_get_sas_address(&controller->phy_table[1], &first_address);
scic_sds_phy_get_sas_address(&controller->phy_table[3], &second_address);
if (sci_sas_address_compare(first_address, second_address) == 0)
{
return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
}
}
#endif // !defined(ARLINGTON_BUILD)
return SCI_SUCCESS;
}
/**
* @brief This method processes the completions transport layer (TL) status
* to determine if the RAW task management frame was sent successfully.
* If the raw frame was sent successfully, then the state for the
* task request transitions to waiting for a response frame.
*
* @param[in] this_request This parameter specifies the request for which
* the TC completion was received.
* @param[in] completion_code This parameter indicates the completion status
* information for the TC.
*
* @return Indicate if the tc completion handler was successful.
* @retval SCI_SUCCESS currently this method always returns success.
*/
static
SCI_STATUS scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_TASK_MANAGEMENT,
"scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE
);
break;
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
// Currently, the decision is to simply allow the task request to
// timeout if the task IU wasn't received successfully.
// There is a potential for receiving multiple task responses if we
// decide to send the task IU again.
SCIC_LOG_WARNING((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_TASK_MANAGEMENT,
"TaskRequest:0x%x CompletionCode:%x - ACK/NAK timeout\n",
this_request, completion_code
));
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE
);
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return SCI_SUCCESS;
}
