static CURLcode
set_ssl_version_min_max(struct connectdata *conn, int sockindex)
{
struct Curl_easy *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
int mbedtls_ver_min = MBEDTLS_SSL_MINOR_VERSION_1;
int mbedtls_ver_max = MBEDTLS_SSL_MINOR_VERSION_1;
long ssl_version = SSL_CONN_CONFIG(version);
long ssl_version_max = SSL_CONN_CONFIG(version_max);
CURLcode result = CURLE_OK;
switch(ssl_version) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
ssl_version = CURL_SSLVERSION_TLSv1_0;
ssl_version_max = CURL_SSLVERSION_MAX_TLSv1_2;
break;
}
switch(ssl_version_max) {
case CURL_SSLVERSION_MAX_NONE:
ssl_version_max = ssl_version << 16;
break;
case CURL_SSLVERSION_MAX_DEFAULT:
ssl_version_max = CURL_SSLVERSION_MAX_TLSv1_2;
break;
}
result = mbedtls_version_from_curl(&mbedtls_ver_min, ssl_version);
if(result) {
failf(data, "unsupported min version passed via CURLOPT_SSLVERSION");
return result;
}
result = mbedtls_version_from_curl(&mbedtls_ver_max, ssl_version_max >> 16);
if(result) {
failf(data, "unsupported max version passed via CURLOPT_SSLVERSION");
return result;
}
mbedtls_ssl_conf_min_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
mbedtls_ver_min);
mbedtls_ssl_conf_max_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
mbedtls_ver_max);
return result;
}
static CURLcode
polarssl_connect_step2(struct connectdata *conn,
int sockindex)
{
int ret;
struct Curl_easy *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
char buffer[1024];
const char * const pinnedpubkey = SSL_IS_PROXY() ?
data->set.str[STRING_SSL_PINNEDPUBLICKEY_PROXY] :
data->set.str[STRING_SSL_PINNEDPUBLICKEY_ORIG];
char errorbuf[128];
errorbuf[0] = 0;
conn->recv[sockindex] = polarssl_recv;
conn->send[sockindex] = polarssl_send;
ret = ssl_handshake(&BACKEND->ssl);
switch(ret) {
case 0:
break;
case POLARSSL_ERR_NET_WANT_READ:
connssl->connecting_state = ssl_connect_2_reading;
return CURLE_OK;
case POLARSSL_ERR_NET_WANT_WRITE:
connssl->connecting_state = ssl_connect_2_writing;
return CURLE_OK;
default:
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "ssl_handshake returned - PolarSSL: (-0x%04X) %s",
-ret, errorbuf);
return CURLE_SSL_CONNECT_ERROR;
}
infof(data, "PolarSSL: Handshake complete, cipher is %s\n",
ssl_get_ciphersuite(&BACKEND->ssl) );
ret = ssl_get_verify_result(&BACKEND->ssl);
if(ret && SSL_CONN_CONFIG(verifypeer)) {
if(ret & BADCERT_EXPIRED)
failf(data, "Cert verify failed: BADCERT_EXPIRED");
if(ret & BADCERT_REVOKED) {
failf(data, "Cert verify failed: BADCERT_REVOKED");
return CURLE_SSL_CACERT;
}
if(ret & BADCERT_CN_MISMATCH)
failf(data, "Cert verify failed: BADCERT_CN_MISMATCH");
if(ret & BADCERT_NOT_TRUSTED)
failf(data, "Cert verify failed: BADCERT_NOT_TRUSTED");
return CURLE_PEER_FAILED_VERIFICATION;
}
if(ssl_get_peer_cert(&(BACKEND->ssl))) {
/* If the session was resumed, there will be no peer certs */
memset(buffer, 0, sizeof(buffer));
if(x509_crt_info(buffer, sizeof(buffer), (char *)"* ",
ssl_get_peer_cert(&(BACKEND->ssl))) != -1)
infof(data, "Dumping cert info:\n%s\n", buffer);
}
/* adapted from mbedtls.c */
if(pinnedpubkey) {
int size;
CURLcode result;
x509_crt *p;
unsigned char pubkey[PUB_DER_MAX_BYTES];
const x509_crt *peercert;
peercert = ssl_get_peer_cert(&BACKEND->ssl);
if(!peercert || !peercert->raw.p || !peercert->raw.len) {
failf(data, "Failed due to missing peer certificate");
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
p = calloc(1, sizeof(*p));
if(!p)
return CURLE_OUT_OF_MEMORY;
x509_crt_init(p);
/* Make a copy of our const peercert because pk_write_pubkey_der
needs a non-const key, for now.
https://github.com/ARMmbed/mbedtls/issues/396 */
if(x509_crt_parse_der(p, peercert->raw.p, peercert->raw.len)) {
failf(data, "Failed copying peer certificate");
x509_crt_free(p);
free(p);
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
size = pk_write_pubkey_der(&p->pk, pubkey, PUB_DER_MAX_BYTES);
if(size <= 0) {
failf(data, "Failed copying public key from peer certificate");
x509_crt_free(p);
free(p);
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
/* pk_write_pubkey_der writes data at the end of the buffer. */
result = Curl_pin_peer_pubkey(data,
pinnedpubkey,
&pubkey[PUB_DER_MAX_BYTES - size], size);
if(result) {
x509_crt_free(p);
free(p);
return result;
}
x509_crt_free(p);
free(p);
}
#ifdef HAS_ALPN
if(conn->bits.tls_enable_alpn) {
const char *next_protocol = ssl_get_alpn_protocol(&BACKEND->ssl);
if(next_protocol != NULL) {
infof(data, "ALPN, server accepted to use %s\n", next_protocol);
#ifdef USE_NGHTTP2
if(!strncmp(next_protocol, NGHTTP2_PROTO_VERSION_ID,
NGHTTP2_PROTO_VERSION_ID_LEN)) {
conn->negnpn = CURL_HTTP_VERSION_2;
}
else
#endif
if(!strncmp(next_protocol, ALPN_HTTP_1_1, ALPN_HTTP_1_1_LENGTH)) {
conn->negnpn = CURL_HTTP_VERSION_1_1;
}
}
else
infof(data, "ALPN, server did not agree to a protocol\n");
}
#endif
connssl->connecting_state = ssl_connect_3;
infof(data, "SSL connected\n");
return CURLE_OK;
}
static CURLcode
polarssl_connect_step1(struct connectdata *conn,
int sockindex)
{
struct Curl_easy *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
const char *capath = SSL_CONN_CONFIG(CApath);
const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name :
conn->host.name;
const long int port = SSL_IS_PROXY() ? conn->port : conn->remote_port;
int ret = -1;
char errorbuf[128];
errorbuf[0]=0;
/* PolarSSL only supports SSLv3 and TLSv1 */
if(SSL_CONN_CONFIG(version) == CURL_SSLVERSION_SSLv2) {
failf(data, "PolarSSL does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef THREADING_SUPPORT
entropy_init_mutex(&entropy);
if((ret = ctr_drbg_init(&BACKEND->ctr_drbg, entropy_func_mutex, &entropy,
NULL, 0)) != 0) {
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "Failed - PolarSSL: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#else
entropy_init(&BACKEND->entropy);
if((ret = ctr_drbg_init(&BACKEND->ctr_drbg, entropy_func, &BACKEND->entropy,
NULL, 0)) != 0) {
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "Failed - PolarSSL: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#endif /* THREADING_SUPPORT */
/* Load the trusted CA */
memset(&BACKEND->cacert, 0, sizeof(x509_crt));
if(SSL_CONN_CONFIG(CAfile)) {
ret = x509_crt_parse_file(&BACKEND->cacert,
SSL_CONN_CONFIG(CAfile));
if(ret<0) {
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "Error reading ca cert file %s - PolarSSL: (-0x%04X) %s",
SSL_CONN_CONFIG(CAfile), -ret, errorbuf);
if(SSL_CONN_CONFIG(verifypeer))
return CURLE_SSL_CACERT_BADFILE;
}
}
if(capath) {
ret = x509_crt_parse_path(&BACKEND->cacert, capath);
if(ret<0) {
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "Error reading ca cert path %s - PolarSSL: (-0x%04X) %s",
capath, -ret, errorbuf);
if(SSL_CONN_CONFIG(verifypeer))
return CURLE_SSL_CACERT_BADFILE;
}
}
/* Load the client certificate */
memset(&BACKEND->clicert, 0, sizeof(x509_crt));
if(SSL_SET_OPTION(cert)) {
ret = x509_crt_parse_file(&BACKEND->clicert,
SSL_SET_OPTION(cert));
if(ret) {
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "Error reading client cert file %s - PolarSSL: (-0x%04X) %s",
SSL_SET_OPTION(cert), -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the client private key */
if(SSL_SET_OPTION(key)) {
pk_context pk;
pk_init(&pk);
ret = pk_parse_keyfile(&pk, SSL_SET_OPTION(key),
SSL_SET_OPTION(key_passwd));
if(ret == 0 && !pk_can_do(&pk, POLARSSL_PK_RSA))
ret = POLARSSL_ERR_PK_TYPE_MISMATCH;
if(ret == 0)
rsa_copy(&BACKEND->rsa, pk_rsa(pk));
else
rsa_free(&BACKEND->rsa);
pk_free(&pk);
if(ret) {
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "Error reading private key %s - PolarSSL: (-0x%04X) %s",
SSL_SET_OPTION(key), -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the CRL */
memset(&BACKEND->crl, 0, sizeof(x509_crl));
if(SSL_SET_OPTION(CRLfile)) {
ret = x509_crl_parse_file(&BACKEND->crl,
SSL_SET_OPTION(CRLfile));
if(ret) {
error_strerror(ret, errorbuf, sizeof(errorbuf));
failf(data, "Error reading CRL file %s - PolarSSL: (-0x%04X) %s",
SSL_SET_OPTION(CRLfile), -ret, errorbuf);
return CURLE_SSL_CRL_BADFILE;
}
}
infof(data, "PolarSSL: Connecting to %s:%d\n", hostname, port);
if(ssl_init(&BACKEND->ssl)) {
failf(data, "PolarSSL: ssl_init failed");
return CURLE_SSL_CONNECT_ERROR;
}
switch(SSL_CONN_CONFIG(version)) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
ssl_set_min_version(&BACKEND->ssl, SSL_MAJOR_VERSION_3,
SSL_MINOR_VERSION_1);
break;
case CURL_SSLVERSION_SSLv3:
ssl_set_min_version(&BACKEND->ssl, SSL_MAJOR_VERSION_3,
SSL_MINOR_VERSION_0);
ssl_set_max_version(&BACKEND->ssl, SSL_MAJOR_VERSION_3,
SSL_MINOR_VERSION_0);
infof(data, "PolarSSL: Forced min. SSL Version to be SSLv3\n");
break;
case CURL_SSLVERSION_TLSv1_0:
case CURL_SSLVERSION_TLSv1_1:
case CURL_SSLVERSION_TLSv1_2:
case CURL_SSLVERSION_TLSv1_3:
{
CURLcode result = set_ssl_version_min_max(conn, sockindex);
if(result != CURLE_OK)
return result;
break;
}
default:
failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION");
return CURLE_SSL_CONNECT_ERROR;
}
ssl_set_endpoint(&BACKEND->ssl, SSL_IS_CLIENT);
ssl_set_authmode(&BACKEND->ssl, SSL_VERIFY_OPTIONAL);
ssl_set_rng(&BACKEND->ssl, ctr_drbg_random,
&BACKEND->ctr_drbg);
ssl_set_bio(&BACKEND->ssl,
net_recv, &conn->sock[sockindex],
net_send, &conn->sock[sockindex]);
ssl_set_ciphersuites(&BACKEND->ssl, ssl_list_ciphersuites());
/* Check if there's a cached ID we can/should use here! */
if(SSL_SET_OPTION(primary.sessionid)) {
void *old_session = NULL;
Curl_ssl_sessionid_lock(conn);
if(!Curl_ssl_getsessionid(conn, &old_session, NULL, sockindex)) {
ret = ssl_set_session(&BACKEND->ssl, old_session);
if(ret) {
Curl_ssl_sessionid_unlock(conn);
failf(data, "ssl_set_session returned -0x%x", -ret);
return CURLE_SSL_CONNECT_ERROR;
}
infof(data, "PolarSSL re-using session\n");
}
Curl_ssl_sessionid_unlock(conn);
}
ssl_set_ca_chain(&BACKEND->ssl,
&BACKEND->cacert,
&BACKEND->crl,
hostname);
ssl_set_own_cert_rsa(&BACKEND->ssl,
&BACKEND->clicert, &BACKEND->rsa);
if(ssl_set_hostname(&BACKEND->ssl, hostname)) {
/* ssl_set_hostname() sets the name to use in CN/SAN checks *and* the name
to set in the SNI extension. So even if curl connects to a host
specified as an IP address, this function must be used. */
failf(data, "couldn't set hostname in PolarSSL");
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef HAS_ALPN
if(conn->bits.tls_enable_alpn) {
static const char *protocols[3];
int cur = 0;
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2) {
protocols[cur++] = NGHTTP2_PROTO_VERSION_ID;
infof(data, "ALPN, offering %s\n", NGHTTP2_PROTO_VERSION_ID);
}
#endif
protocols[cur++] = ALPN_HTTP_1_1;
infof(data, "ALPN, offering %s\n", ALPN_HTTP_1_1);
protocols[cur] = NULL;
ssl_set_alpn_protocols(&BACKEND->ssl, protocols);
}
#endif
#ifdef POLARSSL_DEBUG
ssl_set_dbg(&BACKEND->ssl, polarssl_debug, data);
#endif
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
static CURLcode
cyassl_connect_step2(struct connectdata *conn,
int sockindex)
{
int ret = -1;
struct Curl_easy *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name :
conn->host.name;
const char * const dispname = SSL_IS_PROXY() ?
conn->http_proxy.host.dispname : conn->host.dispname;
const char * const pinnedpubkey = SSL_IS_PROXY() ?
data->set.str[STRING_SSL_PINNEDPUBLICKEY_PROXY] :
data->set.str[STRING_SSL_PINNEDPUBLICKEY_ORIG];
conn->recv[sockindex] = cyassl_recv;
conn->send[sockindex] = cyassl_send;
/* Enable RFC2818 checks */
if(SSL_CONN_CONFIG(verifyhost)) {
ret = CyaSSL_check_domain_name(BACKEND->handle, hostname);
if(ret == SSL_FAILURE)
return CURLE_OUT_OF_MEMORY;
}
ret = SSL_connect(BACKEND->handle);
if(ret != 1) {
char error_buffer[CYASSL_MAX_ERROR_SZ];
int detail = SSL_get_error(BACKEND->handle, ret);
if(SSL_ERROR_WANT_READ == detail) {
connssl->connecting_state = ssl_connect_2_reading;
return CURLE_OK;
}
else if(SSL_ERROR_WANT_WRITE == detail) {
connssl->connecting_state = ssl_connect_2_writing;
return CURLE_OK;
}
/* There is no easy way to override only the CN matching.
* This will enable the override of both mismatching SubjectAltNames
* as also mismatching CN fields */
else if(DOMAIN_NAME_MISMATCH == detail) {
#if 1
failf(data, "\tsubject alt name(s) or common name do not match \"%s\"\n",
dispname);
return CURLE_PEER_FAILED_VERIFICATION;
#else
/* When the CyaSSL_check_domain_name() is used and you desire to continue
* on a DOMAIN_NAME_MISMATCH, i.e. 'conn->ssl_config.verifyhost == 0',
* CyaSSL version 2.4.0 will fail with an INCOMPLETE_DATA error. The only
* way to do this is currently to switch the CyaSSL_check_domain_name()
* in and out based on the 'conn->ssl_config.verifyhost' value. */
if(SSL_CONN_CONFIG(verifyhost)) {
failf(data,
"\tsubject alt name(s) or common name do not match \"%s\"\n",
dispname);
return CURLE_PEER_FAILED_VERIFICATION;
}
else {
infof(data,
"\tsubject alt name(s) and/or common name do not match \"%s\"\n",
dispname);
return CURLE_OK;
}
#endif
}
#if LIBCYASSL_VERSION_HEX >= 0x02007000 /* 2.7.0 */
else if(ASN_NO_SIGNER_E == detail) {
if(SSL_CONN_CONFIG(verifypeer)) {
failf(data, "\tCA signer not available for verification\n");
return CURLE_SSL_CACERT_BADFILE;
}
else {
/* Just continue with a warning if no strict certificate
verification is required. */
infof(data, "CA signer not available for verification, "
"continuing anyway\n");
}
}
#endif
else {
failf(data, "SSL_connect failed with error %d: %s", detail,
ERR_error_string(detail, error_buffer));
return CURLE_SSL_CONNECT_ERROR;
}
}
if(pinnedpubkey) {
#ifdef KEEP_PEER_CERT
X509 *x509;
const char *x509_der;
int x509_der_len;
curl_X509certificate x509_parsed;
curl_asn1Element *pubkey;
CURLcode result;
x509 = SSL_get_peer_certificate(BACKEND->handle);
if(!x509) {
failf(data, "SSL: failed retrieving server certificate");
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
x509_der = (const char *)CyaSSL_X509_get_der(x509, &x509_der_len);
if(!x509_der) {
failf(data, "SSL: failed retrieving ASN.1 server certificate");
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
memset(&x509_parsed, 0, sizeof(x509_parsed));
if(Curl_parseX509(&x509_parsed, x509_der, x509_der + x509_der_len))
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
pubkey = &x509_parsed.subjectPublicKeyInfo;
if(!pubkey->header || pubkey->end <= pubkey->header) {
failf(data, "SSL: failed retrieving public key from server certificate");
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
result = Curl_pin_peer_pubkey(data,
pinnedpubkey,
(const unsigned char *)pubkey->header,
(size_t)(pubkey->end - pubkey->header));
if(result) {
failf(data, "SSL: public key does not match pinned public key!");
return result;
}
#else
failf(data, "Library lacks pinning support built-in");
return CURLE_NOT_BUILT_IN;
#endif
}
#ifdef HAVE_ALPN
if(conn->bits.tls_enable_alpn) {
int rc;
char *protocol = NULL;
unsigned short protocol_len = 0;
rc = wolfSSL_ALPN_GetProtocol(BACKEND->handle, &protocol, &protocol_len);
if(rc == SSL_SUCCESS) {
infof(data, "ALPN, server accepted to use %.*s\n", protocol_len,
protocol);
if(protocol_len == ALPN_HTTP_1_1_LENGTH &&
!memcmp(protocol, ALPN_HTTP_1_1, ALPN_HTTP_1_1_LENGTH))
conn->negnpn = CURL_HTTP_VERSION_1_1;
#ifdef USE_NGHTTP2
else if(data->set.httpversion >= CURL_HTTP_VERSION_2 &&
protocol_len == NGHTTP2_PROTO_VERSION_ID_LEN &&
!memcmp(protocol, NGHTTP2_PROTO_VERSION_ID,
NGHTTP2_PROTO_VERSION_ID_LEN))
conn->negnpn = CURL_HTTP_VERSION_2;
#endif
else
infof(data, "ALPN, unrecognized protocol %.*s\n", protocol_len,
protocol);
Curl_multiuse_state(conn, conn->negnpn == CURL_HTTP_VERSION_2 ?
BUNDLE_MULTIPLEX : BUNDLE_NO_MULTIUSE);
}
else if(rc == SSL_ALPN_NOT_FOUND)
infof(data, "ALPN, server did not agree to a protocol\n");
else {
failf(data, "ALPN, failure getting protocol, error %d", rc);
return CURLE_SSL_CONNECT_ERROR;
}
}
#endif /* HAVE_ALPN */
connssl->connecting_state = ssl_connect_3;
#if (LIBCYASSL_VERSION_HEX >= 0x03009010)
infof(data, "SSL connection using %s / %s\n",
wolfSSL_get_version(BACKEND->handle),
wolfSSL_get_cipher_name(BACKEND->handle));
#else
infof(data, "SSL connected\n");
#endif
return CURLE_OK;
}
/*
* This function loads all the client/CA certificates and CRLs. Setup the TLS
* layer and do all necessary magic.
*/
static CURLcode
cyassl_connect_step1(struct connectdata *conn,
int sockindex)
{
char *ciphers;
struct Curl_easy *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
SSL_METHOD* req_method = NULL;
curl_socket_t sockfd = conn->sock[sockindex];
#ifdef HAVE_SNI
bool sni = FALSE;
#define use_sni(x) sni = (x)
#else
#define use_sni(x) Curl_nop_stmt
#endif
if(connssl->state == ssl_connection_complete)
return CURLE_OK;
if(SSL_CONN_CONFIG(version_max) != CURL_SSLVERSION_MAX_NONE) {
failf(data, "CyaSSL does not support to set maximum SSL/TLS version");
return CURLE_SSL_CONNECT_ERROR;
}
/* check to see if we've been told to use an explicit SSL/TLS version */
switch(SSL_CONN_CONFIG(version)) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
#if LIBCYASSL_VERSION_HEX >= 0x03003000 /* >= 3.3.0 */
/* minimum protocol version is set later after the CTX object is created */
req_method = SSLv23_client_method();
#else
infof(data, "CyaSSL <3.3.0 cannot be configured to use TLS 1.0-1.2, "
"TLS 1.0 is used exclusively\n");
req_method = TLSv1_client_method();
#endif
use_sni(TRUE);
break;
case CURL_SSLVERSION_TLSv1_0:
#ifdef WOLFSSL_ALLOW_TLSV10
req_method = TLSv1_client_method();
use_sni(TRUE);
#else
failf(data, "CyaSSL does not support TLS 1.0");
return CURLE_NOT_BUILT_IN;
#endif
break;
case CURL_SSLVERSION_TLSv1_1:
req_method = TLSv1_1_client_method();
use_sni(TRUE);
break;
case CURL_SSLVERSION_TLSv1_2:
req_method = TLSv1_2_client_method();
use_sni(TRUE);
break;
case CURL_SSLVERSION_TLSv1_3:
#ifdef WOLFSSL_TLS13
req_method = wolfTLSv1_3_client_method();
use_sni(TRUE);
break;
#else
failf(data, "CyaSSL: TLS 1.3 is not yet supported");
return CURLE_SSL_CONNECT_ERROR;
#endif
case CURL_SSLVERSION_SSLv3:
#ifdef WOLFSSL_ALLOW_SSLV3
req_method = SSLv3_client_method();
use_sni(FALSE);
#else
failf(data, "CyaSSL does not support SSLv3");
return CURLE_NOT_BUILT_IN;
#endif
break;
case CURL_SSLVERSION_SSLv2:
failf(data, "CyaSSL does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
default:
failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION");
return CURLE_SSL_CONNECT_ERROR;
}
if(!req_method) {
failf(data, "SSL: couldn't create a method!");
return CURLE_OUT_OF_MEMORY;
}
if(BACKEND->ctx)
SSL_CTX_free(BACKEND->ctx);
BACKEND->ctx = SSL_CTX_new(req_method);
if(!BACKEND->ctx) {
failf(data, "SSL: couldn't create a context!");
return CURLE_OUT_OF_MEMORY;
}
switch(SSL_CONN_CONFIG(version)) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
#if LIBCYASSL_VERSION_HEX > 0x03004006 /* > 3.4.6 */
/* Versions 3.3.0 to 3.4.6 we know the minimum protocol version is whatever
minimum version of TLS was built in and at least TLS 1.0. For later library
versions that could change (eg TLS 1.0 built in but defaults to TLS 1.1) so
we have this short circuit evaluation to find the minimum supported TLS
version. We use wolfSSL_CTX_SetMinVersion and not CyaSSL_SetMinVersion
because only the former will work before the user's CTX callback is called.
*/
if((wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1) != 1) &&
(wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1_1) != 1) &&
(wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1_2) != 1)
#ifdef WOLFSSL_TLS13
&& (wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1_3) != 1)
#endif
) {
failf(data, "SSL: couldn't set the minimum protocol version");
return CURLE_SSL_CONNECT_ERROR;
}
#endif
break;
}
ciphers = SSL_CONN_CONFIG(cipher_list);
if(ciphers) {
if(!SSL_CTX_set_cipher_list(BACKEND->ctx, ciphers)) {
failf(data, "failed setting cipher list: %s", ciphers);
return CURLE_SSL_CIPHER;
}
infof(data, "Cipher selection: %s\n", ciphers);
}
#ifndef NO_FILESYSTEM
/* load trusted cacert */
if(SSL_CONN_CONFIG(CAfile)) {
if(1 != SSL_CTX_load_verify_locations(BACKEND->ctx,
SSL_CONN_CONFIG(CAfile),
SSL_CONN_CONFIG(CApath))) {
if(SSL_CONN_CONFIG(verifypeer)) {
/* Fail if we insist on successfully verifying the server. */
failf(data, "error setting certificate verify locations:\n"
" CAfile: %s\n CApath: %s",
SSL_CONN_CONFIG(CAfile)?
SSL_CONN_CONFIG(CAfile): "none",
SSL_CONN_CONFIG(CApath)?
SSL_CONN_CONFIG(CApath) : "none");
return CURLE_SSL_CACERT_BADFILE;
}
else {
/* Just continue with a warning if no strict certificate
verification is required. */
infof(data, "error setting certificate verify locations,"
" continuing anyway:\n");
}
}
else {
/* Everything is fine. */
infof(data, "successfully set certificate verify locations:\n");
}
infof(data,
" CAfile: %s\n"
" CApath: %s\n",
SSL_CONN_CONFIG(CAfile) ? SSL_CONN_CONFIG(CAfile):
"none",
SSL_CONN_CONFIG(CApath) ? SSL_CONN_CONFIG(CApath):
"none");
}
/* Load the client certificate, and private key */
if(SSL_SET_OPTION(cert) && SSL_SET_OPTION(key)) {
int file_type = do_file_type(SSL_SET_OPTION(cert_type));
if(SSL_CTX_use_certificate_file(BACKEND->ctx, SSL_SET_OPTION(cert),
file_type) != 1) {
failf(data, "unable to use client certificate (no key or wrong pass"
" phrase?)");
return CURLE_SSL_CONNECT_ERROR;
}
file_type = do_file_type(SSL_SET_OPTION(key_type));
if(SSL_CTX_use_PrivateKey_file(BACKEND->ctx, SSL_SET_OPTION(key),
file_type) != 1) {
failf(data, "unable to set private key");
return CURLE_SSL_CONNECT_ERROR;
}
}
#endif /* !NO_FILESYSTEM */
/* SSL always tries to verify the peer, this only says whether it should
* fail to connect if the verification fails, or if it should continue
* anyway. In the latter case the result of the verification is checked with
* SSL_get_verify_result() below. */
SSL_CTX_set_verify(BACKEND->ctx,
SSL_CONN_CONFIG(verifypeer)?SSL_VERIFY_PEER:
SSL_VERIFY_NONE,
NULL);
#ifdef HAVE_SNI
if(sni) {
struct in_addr addr4;
#ifdef ENABLE_IPV6
struct in6_addr addr6;
#endif
const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name :
conn->host.name;
size_t hostname_len = strlen(hostname);
if((hostname_len < USHRT_MAX) &&
(0 == Curl_inet_pton(AF_INET, hostname, &addr4)) &&
#ifdef ENABLE_IPV6
(0 == Curl_inet_pton(AF_INET6, hostname, &addr6)) &&
#endif
(CyaSSL_CTX_UseSNI(BACKEND->ctx, CYASSL_SNI_HOST_NAME, hostname,
(unsigned short)hostname_len) != 1)) {
infof(data, "WARNING: failed to configure server name indication (SNI) "
"TLS extension\n");
}
}
#endif
/* give application a chance to interfere with SSL set up. */
if(data->set.ssl.fsslctx) {
CURLcode result = CURLE_OK;
result = (*data->set.ssl.fsslctx)(data, BACKEND->ctx,
data->set.ssl.fsslctxp);
if(result) {
failf(data, "error signaled by ssl ctx callback");
return result;
}
}
#ifdef NO_FILESYSTEM
else if(SSL_CONN_CONFIG(verifypeer)) {
failf(data, "SSL: Certificates couldn't be loaded because CyaSSL was built"
" with \"no filesystem\". Either disable peer verification"
" (insecure) or if you are building an application with libcurl you"
" can load certificates via CURLOPT_SSL_CTX_FUNCTION.");
return CURLE_SSL_CONNECT_ERROR;
}
#endif
/* Let's make an SSL structure */
if(BACKEND->handle)
SSL_free(BACKEND->handle);
BACKEND->handle = SSL_new(BACKEND->ctx);
if(!BACKEND->handle) {
failf(data, "SSL: couldn't create a context (handle)!");
return CURLE_OUT_OF_MEMORY;
}
#ifdef HAVE_ALPN
if(conn->bits.tls_enable_alpn) {
char protocols[128];
*protocols = '\0';
/* wolfSSL's ALPN protocol name list format is a comma separated string of
protocols in descending order of preference, eg: "h2,http/1.1" */
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2) {
strcpy(protocols + strlen(protocols), NGHTTP2_PROTO_VERSION_ID ",");
infof(data, "ALPN, offering %s\n", NGHTTP2_PROTO_VERSION_ID);
}
#endif
strcpy(protocols + strlen(protocols), ALPN_HTTP_1_1);
infof(data, "ALPN, offering %s\n", ALPN_HTTP_1_1);
if(wolfSSL_UseALPN(BACKEND->handle, protocols,
(unsigned)strlen(protocols),
WOLFSSL_ALPN_CONTINUE_ON_MISMATCH) != SSL_SUCCESS) {
failf(data, "SSL: failed setting ALPN protocols");
return CURLE_SSL_CONNECT_ERROR;
}
}
#endif /* HAVE_ALPN */
/* Check if there's a cached ID we can/should use here! */
if(SSL_SET_OPTION(primary.sessionid)) {
void *ssl_sessionid = NULL;
Curl_ssl_sessionid_lock(conn);
if(!Curl_ssl_getsessionid(conn, &ssl_sessionid, NULL, sockindex)) {
/* we got a session id, use it! */
if(!SSL_set_session(BACKEND->handle, ssl_sessionid)) {
char error_buffer[CYASSL_MAX_ERROR_SZ];
Curl_ssl_sessionid_unlock(conn);
failf(data, "SSL: SSL_set_session failed: %s",
ERR_error_string(SSL_get_error(BACKEND->handle, 0),
error_buffer));
return CURLE_SSL_CONNECT_ERROR;
}
/* Informational message */
infof(data, "SSL re-using session ID\n");
}
Curl_ssl_sessionid_unlock(conn);
}
/* pass the raw socket into the SSL layer */
if(!SSL_set_fd(BACKEND->handle, (int)sockfd)) {
failf(data, "SSL: SSL_set_fd failed");
return CURLE_SSL_CONNECT_ERROR;
}
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
static CURLcode
mbed_connect_step2(struct connectdata *conn,
int sockindex)
{
int ret;
struct Curl_easy *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
const mbedtls_x509_crt *peercert;
const char * const pinnedpubkey = SSL_IS_PROXY() ?
data->set.str[STRING_SSL_PINNEDPUBLICKEY_PROXY] :
data->set.str[STRING_SSL_PINNEDPUBLICKEY_ORIG];
#ifdef HAS_ALPN
const char *next_protocol;
#endif
char errorbuf[128];
errorbuf[0] = 0;
conn->recv[sockindex] = mbed_recv;
conn->send[sockindex] = mbed_send;
ret = mbedtls_ssl_handshake(&BACKEND->ssl);
if(ret == MBEDTLS_ERR_SSL_WANT_READ) {
connssl->connecting_state = ssl_connect_2_reading;
return CURLE_OK;
}
else if(ret == MBEDTLS_ERR_SSL_WANT_WRITE) {
connssl->connecting_state = ssl_connect_2_writing;
return CURLE_OK;
}
else if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "ssl_handshake returned - mbedTLS: (-0x%04X) %s",
-ret, errorbuf);
return CURLE_SSL_CONNECT_ERROR;
}
infof(data, "mbedTLS: Handshake complete, cipher is %s\n",
mbedtls_ssl_get_ciphersuite(&BACKEND->ssl)
);
ret = mbedtls_ssl_get_verify_result(&BACKEND->ssl);
if(ret && SSL_CONN_CONFIG(verifypeer)) {
if(ret & MBEDTLS_X509_BADCERT_EXPIRED)
failf(data, "Cert verify failed: BADCERT_EXPIRED");
if(ret & MBEDTLS_X509_BADCERT_REVOKED) {
failf(data, "Cert verify failed: BADCERT_REVOKED");
return CURLE_SSL_CACERT;
}
if(ret & MBEDTLS_X509_BADCERT_CN_MISMATCH)
failf(data, "Cert verify failed: BADCERT_CN_MISMATCH");
if(ret & MBEDTLS_X509_BADCERT_NOT_TRUSTED)
failf(data, "Cert verify failed: BADCERT_NOT_TRUSTED");
return CURLE_PEER_FAILED_VERIFICATION;
}
peercert = mbedtls_ssl_get_peer_cert(&BACKEND->ssl);
if(peercert && data->set.verbose) {
const size_t bufsize = 16384;
char *buffer = malloc(bufsize);
if(!buffer)
return CURLE_OUT_OF_MEMORY;
if(mbedtls_x509_crt_info(buffer, bufsize, "* ", peercert) > 0)
infof(data, "Dumping cert info:\n%s\n", buffer);
else
infof(data, "Unable to dump certificate information.\n");
free(buffer);
}
if(pinnedpubkey) {
int size;
CURLcode result;
mbedtls_x509_crt *p;
unsigned char pubkey[PUB_DER_MAX_BYTES];
if(!peercert || !peercert->raw.p || !peercert->raw.len) {
failf(data, "Failed due to missing peer certificate");
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
p = calloc(1, sizeof(*p));
if(!p)
return CURLE_OUT_OF_MEMORY;
mbedtls_x509_crt_init(p);
/* Make a copy of our const peercert because mbedtls_pk_write_pubkey_der
needs a non-const key, for now.
https://github.com/ARMmbed/mbedtls/issues/396 */
if(mbedtls_x509_crt_parse_der(p, peercert->raw.p, peercert->raw.len)) {
failf(data, "Failed copying peer certificate");
mbedtls_x509_crt_free(p);
free(p);
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
size = mbedtls_pk_write_pubkey_der(&p->pk, pubkey, PUB_DER_MAX_BYTES);
if(size <= 0) {
failf(data, "Failed copying public key from peer certificate");
mbedtls_x509_crt_free(p);
free(p);
return CURLE_SSL_PINNEDPUBKEYNOTMATCH;
}
/* mbedtls_pk_write_pubkey_der writes data at the end of the buffer. */
result = Curl_pin_peer_pubkey(data,
pinnedpubkey,
&pubkey[PUB_DER_MAX_BYTES - size], size);
if(result) {
mbedtls_x509_crt_free(p);
free(p);
return result;
}
mbedtls_x509_crt_free(p);
free(p);
}
#ifdef HAS_ALPN
if(conn->bits.tls_enable_alpn) {
next_protocol = mbedtls_ssl_get_alpn_protocol(&BACKEND->ssl);
if(next_protocol) {
infof(data, "ALPN, server accepted to use %s\n", next_protocol);
#ifdef USE_NGHTTP2
if(!strncmp(next_protocol, NGHTTP2_PROTO_VERSION_ID,
NGHTTP2_PROTO_VERSION_ID_LEN) &&
!next_protocol[NGHTTP2_PROTO_VERSION_ID_LEN]) {
conn->negnpn = CURL_HTTP_VERSION_2;
}
else
#endif
if(!strncmp(next_protocol, ALPN_HTTP_1_1, ALPN_HTTP_1_1_LENGTH) &&
!next_protocol[ALPN_HTTP_1_1_LENGTH]) {
conn->negnpn = CURL_HTTP_VERSION_1_1;
}
}
else {
infof(data, "ALPN, server did not agree to a protocol\n");
}
}
#endif
connssl->connecting_state = ssl_connect_3;
infof(data, "SSL connected\n");
return CURLE_OK;
}
static CURLcode
mbed_connect_step1(struct connectdata *conn,
int sockindex)
{
struct Curl_easy *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
const char * const ssl_cafile = SSL_CONN_CONFIG(CAfile);
const bool verifypeer = SSL_CONN_CONFIG(verifypeer);
const char * const ssl_capath = SSL_CONN_CONFIG(CApath);
char * const ssl_cert = SSL_SET_OPTION(cert);
const char * const ssl_crlfile = SSL_SET_OPTION(CRLfile);
const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name :
conn->host.name;
const long int port = SSL_IS_PROXY() ? conn->port : conn->remote_port;
int ret = -1;
char errorbuf[128];
errorbuf[0]=0;
/* mbedTLS only supports SSLv3 and TLSv1 */
if(SSL_CONN_CONFIG(version) == CURL_SSLVERSION_SSLv2) {
failf(data, "mbedTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef THREADING_SUPPORT
entropy_init_mutex(&ts_entropy);
mbedtls_ctr_drbg_init(&BACKEND->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&BACKEND->ctr_drbg, entropy_func_mutex,
&ts_entropy, NULL, 0);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#else
mbedtls_entropy_init(&BACKEND->entropy);
mbedtls_ctr_drbg_init(&BACKEND->ctr_drbg);
ret = mbedtls_ctr_drbg_seed(&BACKEND->ctr_drbg, mbedtls_entropy_func,
&BACKEND->entropy, NULL, 0);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Failed - mbedTLS: ctr_drbg_init returned (-0x%04X) %s\n",
-ret, errorbuf);
}
#endif /* THREADING_SUPPORT */
/* Load the trusted CA */
mbedtls_x509_crt_init(&BACKEND->cacert);
if(ssl_cafile) {
ret = mbedtls_x509_crt_parse_file(&BACKEND->cacert, ssl_cafile);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert file %s - mbedTLS: (-0x%04X) %s",
ssl_cafile, -ret, errorbuf);
if(verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
if(ssl_capath) {
ret = mbedtls_x509_crt_parse_path(&BACKEND->cacert, ssl_capath);
if(ret<0) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading ca cert path %s - mbedTLS: (-0x%04X) %s",
ssl_capath, -ret, errorbuf);
if(verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
/* Load the client certificate */
mbedtls_x509_crt_init(&BACKEND->clicert);
if(ssl_cert) {
ret = mbedtls_x509_crt_parse_file(&BACKEND->clicert, ssl_cert);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading client cert file %s - mbedTLS: (-0x%04X) %s",
ssl_cert, -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the client private key */
mbedtls_pk_init(&BACKEND->pk);
if(SSL_SET_OPTION(key)) {
ret = mbedtls_pk_parse_keyfile(&BACKEND->pk, SSL_SET_OPTION(key),
SSL_SET_OPTION(key_passwd));
if(ret == 0 && !mbedtls_pk_can_do(&BACKEND->pk, MBEDTLS_PK_RSA))
ret = MBEDTLS_ERR_PK_TYPE_MISMATCH;
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading private key %s - mbedTLS: (-0x%04X) %s",
SSL_SET_OPTION(key), -ret, errorbuf);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the CRL */
mbedtls_x509_crl_init(&BACKEND->crl);
if(ssl_crlfile) {
ret = mbedtls_x509_crl_parse_file(&BACKEND->crl, ssl_crlfile);
if(ret) {
#ifdef MBEDTLS_ERROR_C
mbedtls_strerror(ret, errorbuf, sizeof(errorbuf));
#endif /* MBEDTLS_ERROR_C */
failf(data, "Error reading CRL file %s - mbedTLS: (-0x%04X) %s",
ssl_crlfile, -ret, errorbuf);
return CURLE_SSL_CRL_BADFILE;
}
}
infof(data, "mbedTLS: Connecting to %s:%d\n", hostname, port);
mbedtls_ssl_config_init(&BACKEND->config);
mbedtls_ssl_init(&BACKEND->ssl);
if(mbedtls_ssl_setup(&BACKEND->ssl, &BACKEND->config)) {
failf(data, "mbedTLS: ssl_init failed");
return CURLE_SSL_CONNECT_ERROR;
}
ret = mbedtls_ssl_config_defaults(&BACKEND->config,
MBEDTLS_SSL_IS_CLIENT,
MBEDTLS_SSL_TRANSPORT_STREAM,
MBEDTLS_SSL_PRESET_DEFAULT);
if(ret) {
failf(data, "mbedTLS: ssl_config failed");
return CURLE_SSL_CONNECT_ERROR;
}
/* new profile with RSA min key len = 1024 ... */
mbedtls_ssl_conf_cert_profile(&BACKEND->config,
&mbedtls_x509_crt_profile_fr);
switch(SSL_CONN_CONFIG(version)) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
mbedtls_ssl_conf_min_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_1);
infof(data, "mbedTLS: Set min SSL version to TLS 1.0\n");
break;
case CURL_SSLVERSION_SSLv3:
mbedtls_ssl_conf_min_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_0);
mbedtls_ssl_conf_max_version(&BACKEND->config, MBEDTLS_SSL_MAJOR_VERSION_3,
MBEDTLS_SSL_MINOR_VERSION_0);
infof(data, "mbedTLS: Set SSL version to SSLv3\n");
break;
case CURL_SSLVERSION_TLSv1_0:
case CURL_SSLVERSION_TLSv1_1:
case CURL_SSLVERSION_TLSv1_2:
case CURL_SSLVERSION_TLSv1_3:
{
CURLcode result = set_ssl_version_min_max(conn, sockindex);
if(result != CURLE_OK)
return result;
break;
}
default:
failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION");
return CURLE_SSL_CONNECT_ERROR;
}
mbedtls_ssl_conf_authmode(&BACKEND->config, MBEDTLS_SSL_VERIFY_OPTIONAL);
mbedtls_ssl_conf_rng(&BACKEND->config, mbedtls_ctr_drbg_random,
&BACKEND->ctr_drbg);
mbedtls_ssl_set_bio(&BACKEND->ssl, &conn->sock[sockindex],
mbedtls_net_send,
mbedtls_net_recv,
NULL /* rev_timeout() */);
mbedtls_ssl_conf_ciphersuites(&BACKEND->config,
mbedtls_ssl_list_ciphersuites());
#if defined(MBEDTLS_SSL_RENEGOTIATION)
mbedtls_ssl_conf_renegotiation(&BACKEND->config,
MBEDTLS_SSL_RENEGOTIATION_ENABLED);
#endif
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
mbedtls_ssl_conf_session_tickets(&BACKEND->config,
MBEDTLS_SSL_SESSION_TICKETS_DISABLED);
#endif
/* Check if there's a cached ID we can/should use here! */
if(SSL_SET_OPTION(primary.sessionid)) {
void *old_session = NULL;
Curl_ssl_sessionid_lock(conn);
if(!Curl_ssl_getsessionid(conn, &old_session, NULL, sockindex)) {
ret = mbedtls_ssl_set_session(&BACKEND->ssl, old_session);
if(ret) {
Curl_ssl_sessionid_unlock(conn);
failf(data, "mbedtls_ssl_set_session returned -0x%x", -ret);
return CURLE_SSL_CONNECT_ERROR;
}
infof(data, "mbedTLS re-using session\n");
}
Curl_ssl_sessionid_unlock(conn);
}
mbedtls_ssl_conf_ca_chain(&BACKEND->config,
&BACKEND->cacert,
&BACKEND->crl);
if(SSL_SET_OPTION(key)) {
mbedtls_ssl_conf_own_cert(&BACKEND->config,
&BACKEND->clicert, &BACKEND->pk);
}
if(mbedtls_ssl_set_hostname(&BACKEND->ssl, hostname)) {
/* mbedtls_ssl_set_hostname() sets the name to use in CN/SAN checks *and*
the name to set in the SNI extension. So even if curl connects to a
host specified as an IP address, this function must be used. */
failf(data, "couldn't set hostname in mbedTLS");
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef HAS_ALPN
if(conn->bits.tls_enable_alpn) {
const char **p = &BACKEND->protocols[0];
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2)
*p++ = NGHTTP2_PROTO_VERSION_ID;
#endif
*p++ = ALPN_HTTP_1_1;
*p = NULL;
/* this function doesn't clone the protocols array, which is why we need
to keep it around */
if(mbedtls_ssl_conf_alpn_protocols(&BACKEND->config,
&BACKEND->protocols[0])) {
failf(data, "Failed setting ALPN protocols");
return CURLE_SSL_CONNECT_ERROR;
}
for(p = &BACKEND->protocols[0]; *p; ++p)
infof(data, "ALPN, offering %s\n", *p);
}
#endif
#ifdef MBEDTLS_DEBUG
/* In order to make that work in mbedtls MBEDTLS_DEBUG_C must be defined. */
mbedtls_ssl_conf_dbg(&BACKEND->config, mbed_debug, data);
/* - 0 No debug
* - 1 Error
* - 2 State change
* - 3 Informational
* - 4 Verbose
*/
mbedtls_debug_set_threshold(4);
#endif
/* give application a chance to interfere with mbedTLS set up. */
if(data->set.ssl.fsslctx) {
ret = (*data->set.ssl.fsslctx)(data, &BACKEND->config,
data->set.ssl.fsslctxp);
if(ret) {
failf(data, "error signaled by ssl ctx callback");
return ret;
}
}
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
static CURLcode gskit_connect_step1(struct connectdata *conn, int sockindex)
{
struct Curl_easy *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
gsk_handle envir;
CURLcode result;
int rc;
const char * const keyringfile = SSL_CONN_CONFIG(CAfile);
const char * const keyringpwd = SSL_SET_OPTION(key_passwd);
const char * const keyringlabel = SSL_SET_OPTION(cert);
const long int ssl_version = SSL_CONN_CONFIG(version);
const bool verifypeer = SSL_CONN_CONFIG(verifypeer);
const char * const hostname = SSL_IS_PROXY()? conn->http_proxy.host.name:
conn->host.name;
const char *sni;
unsigned int protoflags;
long timeout;
Qso_OverlappedIO_t commarea;
int sockpair[2];
static const int sobufsize = CURL_MAX_WRITE_SIZE;
/* Create SSL environment, start (preferably asynchronous) handshake. */
connssl->handle = (gsk_handle) NULL;
connssl->iocport = -1;
connssl->localfd = -1;
connssl->remotefd = -1;
/* GSKit supports two ways of specifying an SSL context: either by
* application identifier (that should have been defined at the system
* level) or by keyring file, password and certificate label.
* Local certificate name (CURLOPT_SSLCERT) is used to hold either the
* application identifier of the certificate label.
* Key password (CURLOPT_KEYPASSWD) holds the keyring password.
* It is not possible to have different keyrings for the CAs and the
* local certificate. We thus use the CA file (CURLOPT_CAINFO) to identify
* the keyring file.
* If no key password is given and the keyring is the system keyring,
* application identifier mode is tried first, as recommended in IBM doc.
*/
envir = (gsk_handle) NULL;
if(keyringlabel && *keyringlabel && !keyringpwd &&
!strcmp(keyringfile, CURL_CA_BUNDLE)) {
/* Try application identifier mode. */
init_environment(data, &envir, keyringlabel, (const char *) NULL,
(const char *) NULL, (const char *) NULL);
}
if(!envir) {
/* Use keyring mode. */
result = init_environment(data, &envir, (const char *) NULL,
keyringfile, keyringlabel, keyringpwd);
if(result)
return result;
}
/* Create secure session. */
result = gskit_status(data, gsk_secure_soc_open(envir, &connssl->handle),
"gsk_secure_soc_open()", CURLE_SSL_CONNECT_ERROR);
gsk_environment_close(&envir);
if(result)
return result;
/* Establish a pipelining socket pair for SSL over SSL. */
if(conn->proxy_ssl[sockindex].use) {
if(inetsocketpair(sockpair))
return CURLE_SSL_CONNECT_ERROR;
connssl->localfd = sockpair[0];
connssl->remotefd = sockpair[1];
setsockopt(connssl->localfd, SOL_SOCKET, SO_RCVBUF,
(void *) sobufsize, sizeof sobufsize);
setsockopt(connssl->remotefd, SOL_SOCKET, SO_RCVBUF,
(void *) sobufsize, sizeof sobufsize);
setsockopt(connssl->localfd, SOL_SOCKET, SO_SNDBUF,
(void *) sobufsize, sizeof sobufsize);
setsockopt(connssl->remotefd, SOL_SOCKET, SO_SNDBUF,
(void *) sobufsize, sizeof sobufsize);
curlx_nonblock(connssl->localfd, TRUE);
curlx_nonblock(connssl->remotefd, TRUE);
}
/* Determine which SSL/TLS version should be enabled. */
sni = hostname;
switch (ssl_version) {
case CURL_SSLVERSION_SSLv2:
protoflags = CURL_GSKPROTO_SSLV2_MASK;
sni = NULL;
break;
case CURL_SSLVERSION_SSLv3:
protoflags = CURL_GSKPROTO_SSLV3_MASK;
sni = NULL;
break;
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
protoflags = CURL_GSKPROTO_TLSV10_MASK |
CURL_GSKPROTO_TLSV11_MASK | CURL_GSKPROTO_TLSV12_MASK;
break;
case CURL_SSLVERSION_TLSv1_0:
protoflags = CURL_GSKPROTO_TLSV10_MASK;
break;
case CURL_SSLVERSION_TLSv1_1:
protoflags = CURL_GSKPROTO_TLSV11_MASK;
break;
case CURL_SSLVERSION_TLSv1_2:
protoflags = CURL_GSKPROTO_TLSV12_MASK;
break;
case CURL_SSLVERSION_TLSv1_3:
failf(data, "GSKit: TLS 1.3 is not yet supported");
return CURLE_SSL_CONNECT_ERROR;
default:
failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION");
return CURLE_SSL_CONNECT_ERROR;
}
/* Process SNI. Ignore if not supported (on OS400 < V7R1). */
if(sni) {
result = set_buffer(data, connssl->handle,
GSK_SSL_EXTN_SERVERNAME_REQUEST, sni, TRUE);
if(result == CURLE_UNSUPPORTED_PROTOCOL)
result = CURLE_OK;
}
/* Set session parameters. */
if(!result) {
/* Compute the handshake timeout. Since GSKit granularity is 1 second,
we round up the required value. */
timeout = Curl_timeleft(data, NULL, TRUE);
if(timeout < 0)
result = CURLE_OPERATION_TIMEDOUT;
else
result = set_numeric(data, connssl->handle, GSK_HANDSHAKE_TIMEOUT,
(timeout + 999) / 1000);
}
if(!result)
result = set_numeric(data, connssl->handle, GSK_OS400_READ_TIMEOUT, 1);
if(!result)
result = set_numeric(data, connssl->handle, GSK_FD, connssl->localfd >= 0?
connssl->localfd: conn->sock[sockindex]);
if(!result)
result = set_ciphers(conn, connssl->handle, &protoflags);
if(!protoflags) {
failf(data, "No SSL protocol/cipher combination enabled");
result = CURLE_SSL_CIPHER;
}
if(!result)
result = set_enum(data, connssl->handle, GSK_PROTOCOL_SSLV2,
(protoflags & CURL_GSKPROTO_SSLV2_MASK)?
GSK_PROTOCOL_SSLV2_ON: GSK_PROTOCOL_SSLV2_OFF, FALSE);
if(!result)
result = set_enum(data, connssl->handle, GSK_PROTOCOL_SSLV3,
(protoflags & CURL_GSKPROTO_SSLV3_MASK)?
GSK_PROTOCOL_SSLV3_ON: GSK_PROTOCOL_SSLV3_OFF, FALSE);
if(!result)
result = set_enum(data, connssl->handle, GSK_PROTOCOL_TLSV1,
(protoflags & CURL_GSKPROTO_TLSV10_MASK)?
GSK_PROTOCOL_TLSV1_ON: GSK_PROTOCOL_TLSV1_OFF, FALSE);
if(!result) {
result = set_enum(data, connssl->handle, GSK_PROTOCOL_TLSV11,
(protoflags & CURL_GSKPROTO_TLSV11_MASK)?
GSK_TRUE: GSK_FALSE, TRUE);
if(result == CURLE_UNSUPPORTED_PROTOCOL) {
result = CURLE_OK;
if(protoflags == CURL_GSKPROTO_TLSV11_MASK) {
failf(data, "TLS 1.1 not yet supported");
result = CURLE_SSL_CIPHER;
}
}
}
if(!result) {
result = set_enum(data, connssl->handle, GSK_PROTOCOL_TLSV12,
(protoflags & CURL_GSKPROTO_TLSV12_MASK)?
GSK_TRUE: GSK_FALSE, TRUE);
if(result == CURLE_UNSUPPORTED_PROTOCOL) {
result = CURLE_OK;
if(protoflags == CURL_GSKPROTO_TLSV12_MASK) {
failf(data, "TLS 1.2 not yet supported");
result = CURLE_SSL_CIPHER;
}
}
}
if(!result)
result = set_enum(data, connssl->handle, GSK_SERVER_AUTH_TYPE,
verifypeer? GSK_SERVER_AUTH_FULL:
GSK_SERVER_AUTH_PASSTHRU, FALSE);
if(!result) {
/* Start handshake. Try asynchronous first. */
memset(&commarea, 0, sizeof commarea);
connssl->iocport = QsoCreateIOCompletionPort();
if(connssl->iocport != -1) {
result = gskit_status(data,
gsk_secure_soc_startInit(connssl->handle,
connssl->iocport,
&commarea),
"gsk_secure_soc_startInit()",
CURLE_SSL_CONNECT_ERROR);
if(!result) {
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
else
close_async_handshake(connssl);
}
else if(errno != ENOBUFS)
result = gskit_status(data, GSK_ERROR_IO,
"QsoCreateIOCompletionPort()", 0);
else if(conn->proxy_ssl[sockindex].use) {
/* Cannot pipeline while handshaking synchronously. */
result = CURLE_SSL_CONNECT_ERROR;
}
else {
/* No more completion port available. Use synchronous IO. */
result = gskit_status(data, gsk_secure_soc_init(connssl->handle),
"gsk_secure_soc_init()", CURLE_SSL_CONNECT_ERROR);
if(!result) {
connssl->connecting_state = ssl_connect_3;
return CURLE_OK;
}
}
}
/* Error: rollback. */
close_one(connssl, conn, sockindex);
return result;
}
static CURLcode set_ciphers(struct connectdata *conn,
gsk_handle h, unsigned int *protoflags)
{
struct Curl_easy *data = conn->data;
const char *cipherlist = SSL_CONN_CONFIG(cipher_list);
const char *clp;
const gskit_cipher *ctp;
int i;
int l;
bool unsupported;
CURLcode result;
struct {
char *buf;
char *ptr;
} ciphers[CURL_GSKPROTO_LAST];
/* Compile cipher list into GSKit-compatible cipher lists. */
if(!cipherlist)
return CURLE_OK;
while(is_separator(*cipherlist)) /* Skip initial separators. */
cipherlist++;
if(!*cipherlist)
return CURLE_OK;
/* We allocate GSKit buffers of the same size as the input string: since
GSKit tokens are always shorter than their cipher names, allocated buffers
will always be large enough to accomodate the result. */
l = strlen(cipherlist) + 1;
memset((char *) ciphers, 0, sizeof ciphers);
for(i = 0; i < CURL_GSKPROTO_LAST; i++) {
ciphers[i].buf = malloc(l);
if(!ciphers[i].buf) {
while(i--)
free(ciphers[i].buf);
return CURLE_OUT_OF_MEMORY;
}
ciphers[i].ptr = ciphers[i].buf;
*ciphers[i].ptr = '\0';
}
/* Process each cipher in input string. */
unsupported = FALSE;
result = CURLE_OK;
for(;;) {
for(clp = cipherlist; *cipherlist && !is_separator(*cipherlist);)
cipherlist++;
l = cipherlist - clp;
if(!l)
break;
/* Search the cipher in our table. */
for(ctp = ciphertable; ctp->name; ctp++)
if(strncasecompare(ctp->name, clp, l) && !ctp->name[l])
break;
if(!ctp->name) {
failf(data, "Unknown cipher %.*s", l, clp);
result = CURLE_SSL_CIPHER;
}
else {
unsupported |= !(ctp->versions & (CURL_GSKPROTO_SSLV2_MASK |
CURL_GSKPROTO_SSLV3_MASK | CURL_GSKPROTO_TLSV10_MASK));
for(i = 0; i < CURL_GSKPROTO_LAST; i++) {
if(ctp->versions & (1 << i)) {
strcpy(ciphers[i].ptr, ctp->gsktoken);
ciphers[i].ptr += strlen(ctp->gsktoken);
}
}
}
/* Advance to next cipher name or end of string. */
while(is_separator(*cipherlist))
cipherlist++;
}
/* Disable protocols with empty cipher lists. */
for(i = 0; i < CURL_GSKPROTO_LAST; i++) {
if(!(*protoflags & (1 << i)) || !ciphers[i].buf[0]) {
*protoflags &= ~(1 << i);
ciphers[i].buf[0] = '\0';
}
}
/* Try to set-up TLSv1.1 and TLSv2.1 ciphers. */
if(*protoflags & CURL_GSKPROTO_TLSV11_MASK) {
result = set_buffer(data, h, GSK_TLSV11_CIPHER_SPECS,
ciphers[CURL_GSKPROTO_TLSV11].buf, TRUE);
if(result == CURLE_UNSUPPORTED_PROTOCOL) {
result = CURLE_OK;
if(unsupported) {
failf(data, "TLSv1.1-only ciphers are not yet supported");
result = CURLE_SSL_CIPHER;
}
}
}
if(!result && (*protoflags & CURL_GSKPROTO_TLSV12_MASK)) {
result = set_buffer(data, h, GSK_TLSV12_CIPHER_SPECS,
ciphers[CURL_GSKPROTO_TLSV12].buf, TRUE);
if(result == CURLE_UNSUPPORTED_PROTOCOL) {
result = CURLE_OK;
if(unsupported) {
failf(data, "TLSv1.2-only ciphers are not yet supported");
result = CURLE_SSL_CIPHER;
}
}
}
/* Try to set-up TLSv1.0 ciphers. If not successful, concatenate them to
the SSLv3 ciphers. OS/400 prior to version 7.1 will understand it. */
if(!result && (*protoflags & CURL_GSKPROTO_TLSV10_MASK)) {
result = set_buffer(data, h, GSK_TLSV10_CIPHER_SPECS,
ciphers[CURL_GSKPROTO_TLSV10].buf, TRUE);
if(result == CURLE_UNSUPPORTED_PROTOCOL) {
result = CURLE_OK;
strcpy(ciphers[CURL_GSKPROTO_SSLV3].ptr,
ciphers[CURL_GSKPROTO_TLSV10].ptr);
}
}
/* Set-up other ciphers. */
if(!result && (*protoflags & CURL_GSKPROTO_SSLV3_MASK))
result = set_buffer(data, h, GSK_V3_CIPHER_SPECS,
ciphers[CURL_GSKPROTO_SSLV3].buf, FALSE);
if(!result && (*protoflags & CURL_GSKPROTO_SSLV2_MASK))
result = set_buffer(data, h, GSK_V2_CIPHER_SPECS,
ciphers[CURL_GSKPROTO_SSLV2].buf, FALSE);
/* Clean-up. */
for(i = 0; i < CURL_GSKPROTO_LAST; i++)
free(ciphers[i].buf);
return result;
}