/**
* ssl_set_verify_partial - Allow verification using partial chains (with no root)
* @param ctx SSL context
* @retval 0 Success
* @retval -1 Error
*/
static int ssl_set_verify_partial(SSL_CTX *ctx)
{
int rc = 0;
#ifdef HAVE_SSL_PARTIAL_CHAIN
X509_VERIFY_PARAM *param = NULL;
if (C_SslVerifyPartialChains)
{
param = X509_VERIFY_PARAM_new();
if (param)
{
X509_VERIFY_PARAM_set_flags(param, X509_V_FLAG_PARTIAL_CHAIN);
if (SSL_CTX_set1_param(ctx, param) == 0)
{
mutt_debug(LL_DEBUG2, "SSL_CTX_set1_param() failed.\n");
rc = -1;
}
X509_VERIFY_PARAM_free(param);
}
else
{
mutt_debug(LL_DEBUG2, "X509_VERIFY_PARAM_new() failed.\n");
rc = -1;
}
}
#endif
return rc;
}
void SSLContext::setX509VerifyParam(
const ssl::X509VerifyParam& x509VerifyParam) {
if (!x509VerifyParam) {
return;
}
if (SSL_CTX_set1_param(ctx_, x509VerifyParam.get()) != 1) {
throw std::runtime_error("SSL_CTX_set1_param " + getErrors());
}
}
/* static */ void
BSecureSocket::Private::_CreateContext()
{
sContext = SSL_CTX_new(SSLv23_method());
// Disable legacy protocols. They have known vulnerabilities.
SSL_CTX_set_options(sContext, SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3);
// Don't bother us with ERROR_WANT_READ.
SSL_CTX_set_mode(sContext, SSL_MODE_AUTO_RETRY);
// Setup certificate verification
BPath certificateStore;
find_directory(B_SYSTEM_DATA_DIRECTORY, &certificateStore);
certificateStore.Append("ssl/CARootCertificates.pem");
// TODO we may want to add a non-packaged certificate directory?
// (would make it possible to store user-added certificate exceptions
// there)
SSL_CTX_load_verify_locations(sContext, certificateStore.Path(), NULL);
SSL_CTX_set_verify(sContext, SSL_VERIFY_PEER, VerifyCallback);
// OpenSSL 1.0.2 and later: use the alternate "trusted first" algorithm to validate certificate
// chains. This makes the validation stop as soon as a recognized certificate is found in the
// chain, instead of validating the whole chain, then seeing if the root certificate is known.
#ifdef X509_V_FLAG_TRUSTED_FIRST
X509_VERIFY_PARAM* verifyParam = X509_VERIFY_PARAM_new();
X509_VERIFY_PARAM_set_flags(verifyParam, X509_V_FLAG_TRUSTED_FIRST);
SSL_CTX_set1_param(sContext, verifyParam);
// TODO we need to free this after freeing the SSL context (which we currently never do)
// X509_VERIFY_PARAM_free(verifyParam);
#endif
// Get an unique index number for storing application data in SSL
// structs. We will store a pointer to the BSecureSocket class there.
sDataIndex = SSL_get_ex_new_index(0, NULL, NULL, NULL, NULL);
}
static int
callback_dumb_increment(struct lws *wsi, enum lws_callback_reasons reason,
void *user, void *in, size_t len)
{
const char *which = "http";
switch (reason) {
case LWS_CALLBACK_CLIENT_ESTABLISHED:
lwsl_info("dumb: LWS_CALLBACK_CLIENT_ESTABLISHED\n");
break;
case LWS_CALLBACK_CLOSED:
lwsl_notice("dumb: LWS_CALLBACK_CLOSED\n");
wsi_dumb = NULL;
break;
case LWS_CALLBACK_CLIENT_RECEIVE:
((char *)in)[len] = '\0';
lwsl_info("rx %d '%s'\n", (int)len, (char *)in);
break;
/* because we are protocols[0] ... */
case LWS_CALLBACK_CLIENT_CONNECTION_ERROR:
if (wsi == wsi_dumb) {
which = "dumb";
wsi_dumb = NULL;
}
if (wsi == wsi_mirror) {
which = "mirror";
wsi_mirror = NULL;
}
lwsl_err("CLIENT_CONNECTION_ERROR: %s: %s %p\n", which, in);
break;
case LWS_CALLBACK_CLIENT_CONFIRM_EXTENSION_SUPPORTED:
if ((strcmp(in, "deflate-stream") == 0) && deny_deflate) {
lwsl_notice("denied deflate-stream extension\n");
return 1;
}
if ((strcmp(in, "x-webkit-deflate-frame") == 0))
return 1;
if ((strcmp(in, "deflate-frame") == 0))
return 1;
break;
case LWS_CALLBACK_RECEIVE_CLIENT_HTTP:
{
char buffer[1024 + LWS_PRE];
char *px = buffer + LWS_PRE;
int lenx = sizeof(buffer) - LWS_PRE;
lwsl_notice("LWS_CALLBACK_RECEIVE_CLIENT_HTTP\n");
/*
* Often you need to flow control this by something
* else being writable. In that case call the api
* to get a callback when writable here, and do the
* pending client read in the writeable callback of
* the output.
*/
if (lws_http_client_read(wsi, &px, &lenx) < 0)
return -1;
while (lenx--)
putchar(*px++);
}
break;
case LWS_CALLBACK_COMPLETED_CLIENT_HTTP:
wsi_dumb = NULL;
force_exit = 1;
break;
#if defined(LWS_USE_POLARSSL)
#else
#if defined(LWS_USE_MBEDTLS)
#else
#if defined(LWS_OPENSSL_SUPPORT) && defined(LWS_HAVE_SSL_CTX_set1_param)
case LWS_CALLBACK_OPENSSL_LOAD_EXTRA_CLIENT_VERIFY_CERTS:
if (crl_path[0]) {
/* Enable CRL checking of the server certificate */
X509_VERIFY_PARAM *param = X509_VERIFY_PARAM_new();
X509_VERIFY_PARAM_set_flags(param, X509_V_FLAG_CRL_CHECK);
SSL_CTX_set1_param((SSL_CTX*)user, param);
X509_STORE *store = SSL_CTX_get_cert_store((SSL_CTX*)user);
X509_LOOKUP *lookup = X509_STORE_add_lookup(store, X509_LOOKUP_file());
int n = X509_load_cert_crl_file(lookup, crl_path, X509_FILETYPE_PEM);
X509_VERIFY_PARAM_free(param);
if (n != 1) {
char errbuf[256];
n = ERR_get_error();
lwsl_err("LWS_CALLBACK_OPENSSL_LOAD_EXTRA_CLIENT_VERIFY_CERTS: SSL error: %s (%d)\n", ERR_error_string(n, errbuf), n);
return 1;
}
}
break;
#endif
#endif
#endif
default:
break;
}
return 0;
}
/* static */ void
BSecureSocket::Private::_CreateContext()
{
// We want SSL to report errors in human readable format.
SSL_load_error_strings();
// "SSLv23" means "any SSL or TLS version". We disable SSL v2 and v3 below
// to keep only TLS 1.0 and above.
sContext = SSL_CTX_new(SSLv23_method());
#if TRACE_SSL
// For debugging purposes: get all SSL messages to the standard error.
SSL_CTX_set_info_callback(sContext, apps_ssl_info_callback);
#endif
// Disable legacy protocols. They have known vulnerabilities.
SSL_CTX_set_options(sContext, SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3);
// Disable SSL/TLS compression to prevent the CRIME attack.
SSL_CTX_set_options(sContext, SSL_OP_NO_COMPRESSION);
// Don't bother us with ERROR_WANT_READ.
SSL_CTX_set_mode(sContext, SSL_MODE_AUTO_RETRY);
// Setup cipher suites.
// Only accept reasonably secure ones ("HIGH") and disable some known
// broken stuff (https://wiki.openssl.org/index.php/SSL/TLS_Client)
SSL_CTX_set_cipher_list(sContext, "HIGH:!aNULL:!PSK:!SRP:!MD5:!RC4");
SSL_CTX_set_ecdh_auto(sContext, 1);
// Setup certificate verification
BPath certificateStore;
find_directory(B_SYSTEM_DATA_DIRECTORY, &certificateStore);
certificateStore.Append("ssl/CARootCertificates.pem");
// TODO we may want to add a non-packaged certificate directory?
// (would make it possible to store user-added certificate exceptions
// there)
SSL_CTX_load_verify_locations(sContext, certificateStore.Path(), NULL);
SSL_CTX_set_verify(sContext, SSL_VERIFY_PEER, VerifyCallback);
// OpenSSL 1.0.2 and later: use the alternate "trusted first" algorithm to
// validate certificate chains. This makes the validation stop as soon as a
// recognized certificate is found in the chain, instead of validating the
// whole chain, then seeing if the root certificate is known.
#ifdef X509_V_FLAG_TRUSTED_FIRST
X509_VERIFY_PARAM* verifyParam = X509_VERIFY_PARAM_new();
X509_VERIFY_PARAM_set_flags(verifyParam, X509_V_FLAG_TRUSTED_FIRST);
SSL_CTX_set1_param(sContext, verifyParam);
// TODO we need to free this after freeing the SSL context (which we
// currently never do)
// X509_VERIFY_PARAM_free(verifyParam);
#endif
// Get an unique index number for storing application data in SSL
// structs. We will store a pointer to the BSecureSocket class there.
sDataIndex = SSL_get_ex_new_index(0, NULL, NULL, NULL, NULL);
#ifdef TRACE_SESSION_KEY
FILE *keylog = NULL;
const char *logpath = getenv("SSLKEYLOGFILE");
if (logpath)
keylog = fopen(logpath, "w+");
if (keylog) {
fprintf(keylog, "# Key Log File generated by Haiku Network Kit\n");
sKeyLogBIO = BIO_new_fp(keylog, BIO_NOCLOSE);
}
#endif
}
as_status
as_tls_context_setup(as_config_tls* tlscfg, as_tls_context* ctx, as_error* errp)
{
// Clear the destination, in case we don't make it.
ctx->ssl_ctx = NULL;
ctx->pkey = NULL;
ctx->cert_blacklist = NULL;
ctx->log_session_info = tlscfg->log_session_info;
ctx->for_login_only = tlscfg->for_login_only;
as_tls_check_init();
pthread_mutex_init(&ctx->lock, NULL);
if (tlscfg->cert_blacklist) {
ctx->cert_blacklist = cert_blacklist_read(tlscfg->cert_blacklist);
if (! ctx->cert_blacklist) {
as_tls_context_destroy(ctx);
return as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"Failed to read certificate blacklist: %s",
tlscfg->cert_blacklist);
}
}
uint16_t protocols = AS_TLS_PROTOCOL_NONE;
as_status status = protocols_parse(tlscfg, &protocols, errp);
if (status != AEROSPIKE_OK) {
as_tls_context_destroy(ctx);
return status;
}
const SSL_METHOD* method = NULL;
// If the selected protocol set is a single protocol we can use a specific method.
if (protocols == AS_TLS_PROTOCOL_TLSV1) {
#if OPENSSL_VERSION_NUMBER >= 0x10100000L
method = TLS_client_method();
#else
method = TLSv1_client_method();
#endif
}
else if (protocols == AS_TLS_PROTOCOL_TLSV1_1) {
#if OPENSSL_VERSION_NUMBER >= 0x10100000L
method = TLS_client_method();
#else
method = TLSv1_1_client_method();
#endif
}
else if (protocols == AS_TLS_PROTOCOL_TLSV1_2) {
#if OPENSSL_VERSION_NUMBER >= 0x10100000L
method = TLS_client_method();
#else
method = TLSv1_2_client_method();
#endif
}
else {
// Multiple protocols are enabled, use a flexible method.
#if OPENSSL_VERSION_NUMBER >= 0x10100000L
method = TLS_client_method();
#else
method = SSLv23_client_method();
#endif
}
ctx->ssl_ctx = SSL_CTX_new(method);
if (ctx->ssl_ctx == NULL) {
as_tls_context_destroy(ctx);
unsigned long errcode = ERR_get_error();
char errbuf[1024];
ERR_error_string_n(errcode, errbuf, sizeof(errbuf));
return as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"Failed to create new TLS context: %s", errbuf);
}
/* always disable SSLv2, as per RFC 6176 */
SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv2);
SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_SSLv3);
// Turn off non-enabled protocols.
if (! (protocols & AS_TLS_PROTOCOL_TLSV1)) {
SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1);
}
if (! (protocols & AS_TLS_PROTOCOL_TLSV1_1)) {
SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_1);
}
if (! (protocols & AS_TLS_PROTOCOL_TLSV1_2)) {
SSL_CTX_set_options(ctx->ssl_ctx, SSL_OP_NO_TLSv1_2);
}
if (tlscfg->cafile || tlscfg->capath) {
int rv = SSL_CTX_load_verify_locations(ctx->ssl_ctx, tlscfg->cafile, tlscfg->capath);
if (rv != 1) {
as_tls_context_destroy(ctx);
char errbuf[1024];
unsigned long errcode = ERR_get_error();
if (errcode != 0) {
ERR_error_string_n(errcode, errbuf, sizeof(errbuf));
return as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"Failed to load CAFile: %s", errbuf);
}
return as_error_set_message(errp, AEROSPIKE_ERR_TLS_ERROR,
"Unknown failure loading CAFile");
}
}
if (tlscfg->certfile) {
int rv = SSL_CTX_use_certificate_chain_file(ctx->ssl_ctx, tlscfg->certfile);
if (rv != 1) {
// We seem to be seeing this bug:
// https://groups.google.com/
// forum/#!topic/mailing.openssl.users/nRvRzmKnEQA
// If the rv is not 1 check the error stack; if it doesn't have an
// error assume we are OK.
//
unsigned long errcode = ERR_peek_error();
if (errcode != SSL_ERROR_NONE) {
// There *was* an error after all.
as_tls_context_destroy(ctx);
unsigned long errcode = ERR_get_error();
char errbuf[1024];
ERR_error_string_n(errcode, errbuf, sizeof(errbuf));
return as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"SSL_CTX_use_certificate_chain_file failed: %s",
errbuf);
}
}
}
if (tlscfg->keyfile) {
bool ok = false;
FILE *fh = fopen(tlscfg->keyfile, "r");
if (fh == NULL) {
as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"failed to open key file %s: %s", tlscfg->keyfile,
strerror(errno));
}
else {
EVP_PKEY *pkey = PEM_read_PrivateKey(fh, NULL, password_cb,
tlscfg->keyfile_pw);
if (pkey == NULL) {
unsigned long errcode = ERR_get_error();
if (ERR_GET_REASON(errcode) == PEM_R_BAD_PASSWORD_READ) {
if (tlscfg->keyfile_pw == NULL) {
as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"key file %s requires a password",
tlscfg->keyfile);
}
else {
as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"password for key file %s too long",
tlscfg->keyfile);
}
}
else if (ERR_GET_REASON(errcode) == EVP_R_BAD_DECRYPT) {
as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"invalid password for key file %s",
tlscfg->keyfile);
}
else {
char errbuf[1024];
ERR_error_string_n(errcode, errbuf, sizeof(errbuf));
as_error_update(errp, AEROSPIKE_ERR_TLS_ERROR,
"PEM_read_PrivateKey failed: %s", errbuf);
}
}
else {
ctx->pkey = pkey;
SSL_CTX_use_PrivateKey(ctx->ssl_ctx, pkey);
ok = true;
}
fclose(fh);
}
if (!ok) {
as_tls_context_destroy(ctx);
return AEROSPIKE_ERR_TLS_ERROR;
}
}
if (tlscfg->cipher_suite) {
int rv = SSL_CTX_set_cipher_list(ctx->ssl_ctx, tlscfg->cipher_suite);
if (rv != 1) {
as_tls_context_destroy(ctx);
return as_error_set_message(errp, AEROSPIKE_ERR_TLS_ERROR,
"no compatible cipher found");
}
// It's bogus that we have to create an SSL just to get the
// cipher list, but SSL_CTX_get_ciphers doesn't appear to
// exist ...
SSL* ssl = SSL_new(ctx->ssl_ctx);
for (int prio = 0; true; ++prio) {
char const * cipherstr = SSL_get_cipher_list(ssl, prio);
if (!cipherstr) {
break;
}
as_log_info("cipher %d: %s", prio+1, cipherstr);
}
SSL_free(ssl);
}
if (tlscfg->crl_check || tlscfg->crl_check_all) {
X509_VERIFY_PARAM* param = X509_VERIFY_PARAM_new();
unsigned long flags = X509_V_FLAG_CRL_CHECK;
if (tlscfg->crl_check_all) {
flags |= X509_V_FLAG_CRL_CHECK_ALL;
}
X509_VERIFY_PARAM_set_flags(param, flags);
SSL_CTX_set1_param(ctx->ssl_ctx, param);
X509_VERIFY_PARAM_free(param);
}
SSL_CTX_set_verify(ctx->ssl_ctx, SSL_VERIFY_PEER, verify_callback);
manage_sigpipe();
return AEROSPIKE_OK;
}
int
s_client_main(int argc, char **argv)
{
unsigned int off = 0, clr = 0;
SSL *con = NULL;
int s, k, width, state = 0, af = AF_UNSPEC;
char *cbuf = NULL, *sbuf = NULL, *mbuf = NULL;
int cbuf_len, cbuf_off;
int sbuf_len, sbuf_off;
fd_set readfds, writefds;
char *port = PORT_STR;
int full_log = 1;
char *host = SSL_HOST_NAME;
char *cert_file = NULL, *key_file = NULL;
int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
char *passarg = NULL, *pass = NULL;
X509 *cert = NULL;
EVP_PKEY *key = NULL;
char *CApath = NULL, *CAfile = NULL, *cipher = NULL;
int reconnect = 0, badop = 0, verify = SSL_VERIFY_NONE, bugs = 0;
int crlf = 0;
int write_tty, read_tty, write_ssl, read_ssl, tty_on, ssl_pending;
SSL_CTX *ctx = NULL;
int ret = 1, in_init = 1, i, nbio_test = 0;
int starttls_proto = PROTO_OFF;
int prexit = 0;
X509_VERIFY_PARAM *vpm = NULL;
int badarg = 0;
const SSL_METHOD *meth = NULL;
int socket_type = SOCK_STREAM;
BIO *sbio;
int mbuf_len = 0;
struct timeval timeout, *timeoutp;
const char *errstr = NULL;
#ifndef OPENSSL_NO_ENGINE
char *engine_id = NULL;
char *ssl_client_engine_id = NULL;
ENGINE *ssl_client_engine = NULL;
#endif
ENGINE *e = NULL;
#ifndef OPENSSL_NO_TLSEXT
char *servername = NULL;
tlsextctx tlsextcbp =
{NULL, 0};
#ifndef OPENSSL_NO_NEXTPROTONEG
const char *next_proto_neg_in = NULL;
#endif
#endif
char *sess_in = NULL;
char *sess_out = NULL;
struct sockaddr peer;
int peerlen = sizeof(peer);
int enable_timeouts = 0;
long socket_mtu = 0;
meth = SSLv23_client_method();
c_Pause = 0;
c_quiet = 0;
c_ign_eof = 0;
c_debug = 0;
c_msg = 0;
c_showcerts = 0;
if (((cbuf = malloc(BUFSIZZ)) == NULL) ||
((sbuf = malloc(BUFSIZZ)) == NULL) ||
((mbuf = malloc(BUFSIZZ + 1)) == NULL)) { /* NUL byte */
BIO_printf(bio_err, "out of memory\n");
goto end;
}
verify_depth = 0;
verify_error = X509_V_OK;
c_nbio = 0;
argc--;
argv++;
while (argc >= 1) {
if (strcmp(*argv, "-host") == 0) {
if (--argc < 1)
goto bad;
host = *(++argv);
} else if (strcmp(*argv, "-port") == 0) {
if (--argc < 1)
goto bad;
port = *(++argv);
if (port == NULL || *port == '\0')
goto bad;
} else if (strcmp(*argv, "-connect") == 0) {
if (--argc < 1)
goto bad;
if (!extract_host_port(*(++argv), &host, NULL, &port))
goto bad;
} else if (strcmp(*argv, "-verify") == 0) {
verify = SSL_VERIFY_PEER;
if (--argc < 1)
goto bad;
verify_depth = strtonum(*(++argv), 0, INT_MAX, &errstr);
if (errstr)
goto bad;
BIO_printf(bio_err, "verify depth is %d\n", verify_depth);
} else if (strcmp(*argv, "-cert") == 0) {
if (--argc < 1)
goto bad;
cert_file = *(++argv);
} else if (strcmp(*argv, "-sess_out") == 0) {
if (--argc < 1)
goto bad;
sess_out = *(++argv);
} else if (strcmp(*argv, "-sess_in") == 0) {
if (--argc < 1)
goto bad;
sess_in = *(++argv);
} else if (strcmp(*argv, "-certform") == 0) {
if (--argc < 1)
goto bad;
cert_format = str2fmt(*(++argv));
} else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm)) {
if (badarg)
goto bad;
continue;
} else if (strcmp(*argv, "-verify_return_error") == 0)
verify_return_error = 1;
else if (strcmp(*argv, "-prexit") == 0)
prexit = 1;
else if (strcmp(*argv, "-crlf") == 0)
crlf = 1;
else if (strcmp(*argv, "-quiet") == 0) {
c_quiet = 1;
c_ign_eof = 1;
} else if (strcmp(*argv, "-ign_eof") == 0)
c_ign_eof = 1;
else if (strcmp(*argv, "-no_ign_eof") == 0)
c_ign_eof = 0;
else if (strcmp(*argv, "-pause") == 0)
c_Pause = 1;
else if (strcmp(*argv, "-debug") == 0)
c_debug = 1;
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv, "-tlsextdebug") == 0)
c_tlsextdebug = 1;
else if (strcmp(*argv, "-status") == 0)
c_status_req = 1;
#endif
else if (strcmp(*argv, "-msg") == 0)
c_msg = 1;
else if (strcmp(*argv, "-showcerts") == 0)
c_showcerts = 1;
else if (strcmp(*argv, "-nbio_test") == 0)
nbio_test = 1;
else if (strcmp(*argv, "-state") == 0)
state = 1;
else if (strcmp(*argv, "-ssl3") == 0)
meth = SSLv3_client_method();
else if (strcmp(*argv, "-tls1_2") == 0)
meth = TLSv1_2_client_method();
else if (strcmp(*argv, "-tls1_1") == 0)
meth = TLSv1_1_client_method();
else if (strcmp(*argv, "-tls1") == 0)
meth = TLSv1_client_method();
#ifndef OPENSSL_NO_DTLS1
else if (strcmp(*argv, "-dtls1") == 0) {
meth = DTLSv1_client_method();
socket_type = SOCK_DGRAM;
} else if (strcmp(*argv, "-timeout") == 0)
enable_timeouts = 1;
else if (strcmp(*argv, "-mtu") == 0) {
if (--argc < 1)
goto bad;
socket_mtu = strtonum(*(++argv), 0, LONG_MAX, &errstr);
if (errstr)
goto bad;
}
#endif
else if (strcmp(*argv, "-bugs") == 0)
bugs = 1;
else if (strcmp(*argv, "-keyform") == 0) {
if (--argc < 1)
goto bad;
key_format = str2fmt(*(++argv));
} else if (strcmp(*argv, "-pass") == 0) {
if (--argc < 1)
goto bad;
passarg = *(++argv);
} else if (strcmp(*argv, "-key") == 0) {
if (--argc < 1)
goto bad;
key_file = *(++argv);
} else if (strcmp(*argv, "-reconnect") == 0) {
reconnect = 5;
} else if (strcmp(*argv, "-CApath") == 0) {
if (--argc < 1)
goto bad;
CApath = *(++argv);
} else if (strcmp(*argv, "-CAfile") == 0) {
if (--argc < 1)
goto bad;
CAfile = *(++argv);
} else if (strcmp(*argv, "-no_tls1_2") == 0)
off |= SSL_OP_NO_TLSv1_2;
else if (strcmp(*argv, "-no_tls1_1") == 0)
off |= SSL_OP_NO_TLSv1_1;
else if (strcmp(*argv, "-no_tls1") == 0)
off |= SSL_OP_NO_TLSv1;
else if (strcmp(*argv, "-no_ssl3") == 0)
off |= SSL_OP_NO_SSLv3;
else if (strcmp(*argv, "-no_ssl2") == 0)
off |= SSL_OP_NO_SSLv2;
else if (strcmp(*argv, "-no_comp") == 0) {
off |= SSL_OP_NO_COMPRESSION;
}
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv, "-no_ticket") == 0) {
off |= SSL_OP_NO_TICKET;
}
#ifndef OPENSSL_NO_NEXTPROTONEG
else if (strcmp(*argv, "-nextprotoneg") == 0) {
if (--argc < 1)
goto bad;
next_proto_neg_in = *(++argv);
}
#endif
#endif
else if (strcmp(*argv, "-serverpref") == 0)
off |= SSL_OP_CIPHER_SERVER_PREFERENCE;
else if (strcmp(*argv, "-legacy_renegotiation") == 0)
; /* no-op */
else if (strcmp(*argv, "-legacy_server_connect") == 0) {
off |= SSL_OP_LEGACY_SERVER_CONNECT;
} else if (strcmp(*argv, "-no_legacy_server_connect") == 0) {
clr |= SSL_OP_LEGACY_SERVER_CONNECT;
} else if (strcmp(*argv, "-cipher") == 0) {
if (--argc < 1)
goto bad;
cipher = *(++argv);
}
else if (strcmp(*argv, "-nbio") == 0) {
c_nbio = 1;
}
else if (strcmp(*argv, "-starttls") == 0) {
if (--argc < 1)
goto bad;
++argv;
if (strcmp(*argv, "smtp") == 0)
starttls_proto = PROTO_SMTP;
else if (strcmp(*argv, "lmtp") == 0)
starttls_proto = PROTO_LMTP;
else if (strcmp(*argv, "pop3") == 0)
starttls_proto = PROTO_POP3;
else if (strcmp(*argv, "imap") == 0)
starttls_proto = PROTO_IMAP;
else if (strcmp(*argv, "ftp") == 0)
starttls_proto = PROTO_FTP;
else if (strcmp(*argv, "xmpp") == 0)
starttls_proto = PROTO_XMPP;
else
goto bad;
}
#ifndef OPENSSL_NO_ENGINE
else if (strcmp(*argv, "-engine") == 0) {
if (--argc < 1)
goto bad;
engine_id = *(++argv);
} else if (strcmp(*argv, "-ssl_client_engine") == 0) {
if (--argc < 1)
goto bad;
ssl_client_engine_id = *(++argv);
}
#endif
else if (strcmp(*argv, "-4") == 0) {
af = AF_INET;
} else if (strcmp(*argv, "-6") == 0) {
af = AF_INET6;
}
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv, "-servername") == 0) {
if (--argc < 1)
goto bad;
servername = *(++argv);
/* meth=TLSv1_client_method(); */
}
#endif
#ifndef OPENSSL_NO_SRTP
else if (strcmp(*argv, "-use_srtp") == 0) {
if (--argc < 1)
goto bad;
srtp_profiles = *(++argv);
}
#endif
else if (strcmp(*argv, "-keymatexport") == 0) {
if (--argc < 1)
goto bad;
keymatexportlabel = *(++argv);
} else if (strcmp(*argv, "-keymatexportlen") == 0) {
const char *errstr;
if (--argc < 1)
goto bad;
keymatexportlen = strtonum(*(++argv), 1, INT_MAX, &errstr);
if (errstr)
goto bad;
} else {
BIO_printf(bio_err, "unknown option %s\n", *argv);
badop = 1;
break;
}
argc--;
argv++;
}
if (badop) {
bad:
if (errstr)
BIO_printf(bio_err, "invalid argument %s: %s\n",
*argv, errstr);
else
sc_usage();
goto end;
}
#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
next_proto.status = -1;
if (next_proto_neg_in) {
next_proto.data = next_protos_parse(&next_proto.len, next_proto_neg_in);
if (next_proto.data == NULL) {
BIO_printf(bio_err, "Error parsing -nextprotoneg argument\n");
goto end;
}
} else
next_proto.data = NULL;
#endif
#ifndef OPENSSL_NO_ENGINE
e = setup_engine(bio_err, engine_id, 1);
if (ssl_client_engine_id) {
ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
if (!ssl_client_engine) {
BIO_printf(bio_err,
"Error getting client auth engine\n");
goto end;
}
}
#endif
if (!app_passwd(bio_err, passarg, NULL, &pass, NULL)) {
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
if (key_file == NULL)
key_file = cert_file;
if (key_file) {
key = load_key(bio_err, key_file, key_format, 0, pass, e,
"client certificate private key file");
if (!key) {
ERR_print_errors(bio_err);
goto end;
}
}
if (cert_file) {
cert = load_cert(bio_err, cert_file, cert_format,
NULL, e, "client certificate file");
if (!cert) {
ERR_print_errors(bio_err);
goto end;
}
}
if (bio_c_out == NULL) {
if (c_quiet && !c_debug && !c_msg) {
bio_c_out = BIO_new(BIO_s_null());
} else {
if (bio_c_out == NULL)
bio_c_out = BIO_new_fp(stdout, BIO_NOCLOSE);
}
}
ctx = SSL_CTX_new(meth);
if (ctx == NULL) {
ERR_print_errors(bio_err);
goto end;
}
if (vpm)
SSL_CTX_set1_param(ctx, vpm);
#ifndef OPENSSL_NO_ENGINE
if (ssl_client_engine) {
if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine)) {
BIO_puts(bio_err, "Error setting client auth engine\n");
ERR_print_errors(bio_err);
ENGINE_free(ssl_client_engine);
goto end;
}
ENGINE_free(ssl_client_engine);
}
#endif
#ifndef OPENSSL_NO_SRTP
if (srtp_profiles != NULL)
SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles);
#endif
if (bugs)
SSL_CTX_set_options(ctx, SSL_OP_ALL | off);
else
SSL_CTX_set_options(ctx, off);
if (clr)
SSL_CTX_clear_options(ctx, clr);
/*
* DTLS: partial reads end up discarding unread UDP bytes :-( Setting
* read ahead solves this problem.
*/
if (socket_type == SOCK_DGRAM)
SSL_CTX_set_read_ahead(ctx, 1);
#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
if (next_proto.data)
SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto);
#endif
if (state)
SSL_CTX_set_info_callback(ctx, apps_ssl_info_callback);
if (cipher != NULL)
if (!SSL_CTX_set_cipher_list(ctx, cipher)) {
BIO_printf(bio_err, "error setting cipher list\n");
ERR_print_errors(bio_err);
goto end;
}
SSL_CTX_set_verify(ctx, verify, verify_callback);
if (!set_cert_key_stuff(ctx, cert, key))
goto end;
if ((!SSL_CTX_load_verify_locations(ctx, CAfile, CApath)) ||
(!SSL_CTX_set_default_verify_paths(ctx))) {
/*
* BIO_printf(bio_err,"error setting default verify
* locations\n");
*/
ERR_print_errors(bio_err);
/* goto end; */
}
#ifndef OPENSSL_NO_TLSEXT
if (servername != NULL) {
tlsextcbp.biodebug = bio_err;
SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
}
#endif
con = SSL_new(ctx);
if (sess_in) {
SSL_SESSION *sess;
BIO *stmp = BIO_new_file(sess_in, "r");
if (!stmp) {
BIO_printf(bio_err, "Can't open session file %s\n",
sess_in);
ERR_print_errors(bio_err);
goto end;
}
sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
BIO_free(stmp);
if (!sess) {
BIO_printf(bio_err, "Can't open session file %s\n",
sess_in);
ERR_print_errors(bio_err);
goto end;
}
SSL_set_session(con, sess);
SSL_SESSION_free(sess);
}
#ifndef OPENSSL_NO_TLSEXT
if (servername != NULL) {
if (!SSL_set_tlsext_host_name(con, servername)) {
BIO_printf(bio_err, "Unable to set TLS servername extension.\n");
ERR_print_errors(bio_err);
goto end;
}
}
#endif
/* SSL_set_cipher_list(con,"RC4-MD5"); */
re_start:
if (init_client(&s, host, port, socket_type, af) == 0) {
BIO_printf(bio_err, "connect:errno=%d\n", errno);
shutdown(s, SHUT_RD);
close(s);
goto end;
}
BIO_printf(bio_c_out, "CONNECTED(%08X)\n", s);
if (c_nbio) {
unsigned long l = 1;
BIO_printf(bio_c_out, "turning on non blocking io\n");
if (BIO_socket_ioctl(s, FIONBIO, &l) < 0) {
ERR_print_errors(bio_err);
goto end;
}
}
if (c_Pause & 0x01)
SSL_set_debug(con, 1);
if (SSL_version(con) == DTLS1_VERSION) {
sbio = BIO_new_dgram(s, BIO_NOCLOSE);
if (getsockname(s, &peer, (void *) &peerlen) < 0) {
BIO_printf(bio_err, "getsockname:errno=%d\n",
errno);
shutdown(s, SHUT_RD);
close(s);
goto end;
}
(void) BIO_ctrl_set_connected(sbio, 1, &peer);
if (enable_timeouts) {
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_RCV_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_SND_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
}
if (socket_mtu > 28) {
SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
SSL_set_mtu(con, socket_mtu - 28);
} else
/* want to do MTU discovery */
BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
} else
sbio = BIO_new_socket(s, BIO_NOCLOSE);
if (nbio_test) {
BIO *test;
test = BIO_new(BIO_f_nbio_test());
sbio = BIO_push(test, sbio);
}
if (c_debug) {
SSL_set_debug(con, 1);
BIO_set_callback(sbio, bio_dump_callback);
BIO_set_callback_arg(sbio, (char *) bio_c_out);
}
if (c_msg) {
SSL_set_msg_callback(con, msg_cb);
SSL_set_msg_callback_arg(con, bio_c_out);
}
#ifndef OPENSSL_NO_TLSEXT
if (c_tlsextdebug) {
SSL_set_tlsext_debug_callback(con, tlsext_cb);
SSL_set_tlsext_debug_arg(con, bio_c_out);
}
if (c_status_req) {
SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
}
#endif
SSL_set_bio(con, sbio, sbio);
SSL_set_connect_state(con);
/* ok, lets connect */
width = SSL_get_fd(con) + 1;
read_tty = 1;
write_tty = 0;
tty_on = 0;
read_ssl = 1;
write_ssl = 1;
cbuf_len = 0;
cbuf_off = 0;
sbuf_len = 0;
sbuf_off = 0;
/* This is an ugly hack that does a lot of assumptions */
/*
* We do have to handle multi-line responses which may come in a
* single packet or not. We therefore have to use BIO_gets() which
* does need a buffering BIO. So during the initial chitchat we do
* push a buffering BIO into the chain that is removed again later on
* to not disturb the rest of the s_client operation.
*/
if (starttls_proto == PROTO_SMTP || starttls_proto == PROTO_LMTP) {
int foundit = 0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from SMTP */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
}
while (mbuf_len > 3 && mbuf[3] == '-');
/* STARTTLS command requires EHLO... */
BIO_printf(fbio, "%cHLO openssl.client.net\r\n",
starttls_proto == PROTO_SMTP ? 'E' : 'L');
(void) BIO_flush(fbio);
/* wait for multi-line response to end EHLO SMTP response */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
if (strstr(mbuf, "STARTTLS"))
foundit = 1;
}
while (mbuf_len > 3 && mbuf[3] == '-');
(void) BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't found starttls in server response,"
" try anyway...\n");
BIO_printf(sbio, "STARTTLS\r\n");
BIO_read(sbio, sbuf, BUFSIZZ);
} else if (starttls_proto == PROTO_POP3) {
mbuf_len = BIO_read(sbio, mbuf, BUFSIZZ);
if (mbuf_len == -1) {
BIO_printf(bio_err, "BIO_read failed\n");
goto end;
}
BIO_printf(sbio, "STLS\r\n");
BIO_read(sbio, sbuf, BUFSIZZ);
} else if (starttls_proto == PROTO_IMAP) {
int foundit = 0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
BIO_gets(fbio, mbuf, BUFSIZZ);
/* STARTTLS command requires CAPABILITY... */
BIO_printf(fbio, ". CAPABILITY\r\n");
(void) BIO_flush(fbio);
/* wait for multi-line CAPABILITY response */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
if (strstr(mbuf, "STARTTLS"))
foundit = 1;
}
while (mbuf_len > 3 && mbuf[0] != '.');
(void) BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't found STARTTLS in server response,"
" try anyway...\n");
BIO_printf(sbio, ". STARTTLS\r\n");
BIO_read(sbio, sbuf, BUFSIZZ);
} else if (starttls_proto == PROTO_FTP) {
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from FTP */
do {
mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ);
}
while (mbuf_len > 3 && mbuf[3] == '-');
(void) BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
BIO_printf(sbio, "AUTH TLS\r\n");
BIO_read(sbio, sbuf, BUFSIZZ);
}
if (starttls_proto == PROTO_XMPP) {
int seen = 0;
BIO_printf(sbio, "<stream:stream "
"xmlns:stream='http://etherx.jabber.org/streams' "
"xmlns='jabber:client' to='%s' version='1.0'>", host);
seen = BIO_read(sbio, mbuf, BUFSIZZ);
mbuf[seen] = 0;
while (!strstr(mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'")) {
if (strstr(mbuf, "/stream:features>"))
goto shut;
seen = BIO_read(sbio, mbuf, BUFSIZZ);
mbuf[seen] = 0;
}
BIO_printf(sbio, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
seen = BIO_read(sbio, sbuf, BUFSIZZ);
sbuf[seen] = 0;
if (!strstr(sbuf, "<proceed"))
goto shut;
mbuf[0] = 0;
}
for (;;) {
FD_ZERO(&readfds);
FD_ZERO(&writefds);
if ((SSL_version(con) == DTLS1_VERSION) &&
DTLSv1_get_timeout(con, &timeout))
timeoutp = &timeout;
else
timeoutp = NULL;
if (SSL_in_init(con) && !SSL_total_renegotiations(con)) {
in_init = 1;
tty_on = 0;
} else {
tty_on = 1;
if (in_init) {
in_init = 0;
if (sess_out) {
BIO *stmp = BIO_new_file(sess_out, "w");
if (stmp) {
PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
BIO_free(stmp);
} else
BIO_printf(bio_err, "Error writing session file %s\n", sess_out);
}
print_stuff(bio_c_out, con, full_log);
if (full_log > 0)
full_log--;
if (starttls_proto) {
BIO_write(bio_err, mbuf, mbuf_len);
/* We don't need to know any more */
starttls_proto = PROTO_OFF;
}
if (reconnect) {
reconnect--;
BIO_printf(bio_c_out, "drop connection and then reconnect\n");
SSL_shutdown(con);
SSL_set_connect_state(con);
shutdown(SSL_get_fd(con), SHUT_RD);
close(SSL_get_fd(con));
goto re_start;
}
}
}
ssl_pending = read_ssl && SSL_pending(con);
/* XXX should add tests for fd_set overflow */
if (!ssl_pending) {
if (tty_on) {
if (read_tty)
FD_SET(fileno(stdin), &readfds);
if (write_tty)
FD_SET(fileno(stdout), &writefds);
}
if (read_ssl)
FD_SET(SSL_get_fd(con), &readfds);
if (write_ssl)
FD_SET(SSL_get_fd(con), &writefds);
/* printf("mode tty(%d %d%d) ssl(%d%d)\n",
tty_on,read_tty,write_tty,read_ssl,write_ssl);*/
i = select(width, &readfds, &writefds,
NULL, timeoutp);
if (i < 0) {
BIO_printf(bio_err, "bad select %d\n",
errno);
goto shut;
/* goto end; */
}
}
if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0) {
BIO_printf(bio_err, "TIMEOUT occured\n");
}
if (!ssl_pending && FD_ISSET(SSL_get_fd(con), &writefds)) {
k = SSL_write(con, &(cbuf[cbuf_off]),
(unsigned int) cbuf_len);
switch (SSL_get_error(con, k)) {
case SSL_ERROR_NONE:
cbuf_off += k;
cbuf_len -= k;
if (k <= 0)
goto end;
/* we have done a write(con,NULL,0); */
if (cbuf_len <= 0) {
read_tty = 1;
write_ssl = 0;
} else { /* if (cbuf_len > 0) */
read_tty = 0;
write_ssl = 1;
}
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out, "write W BLOCK\n");
write_ssl = 1;
read_tty = 0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out, "write R BLOCK\n");
write_tty = 0;
read_ssl = 1;
write_ssl = 0;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out, "write X BLOCK\n");
break;
case SSL_ERROR_ZERO_RETURN:
if (cbuf_len != 0) {
BIO_printf(bio_c_out, "shutdown\n");
ret = 0;
goto shut;
} else {
read_tty = 1;
write_ssl = 0;
break;
}
case SSL_ERROR_SYSCALL:
if ((k != 0) || (cbuf_len != 0)) {
BIO_printf(bio_err, "write:errno=%d\n",
errno);
goto shut;
} else {
read_tty = 1;
write_ssl = 0;
}
break;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
}
} else if (!ssl_pending && FD_ISSET(fileno(stdout), &writefds)) {
i = write(fileno(stdout), &(sbuf[sbuf_off]), sbuf_len);
if (i <= 0) {
BIO_printf(bio_c_out, "DONE\n");
ret = 0;
goto shut;
/* goto end; */
}
sbuf_len -= i;
sbuf_off += i;
if (sbuf_len <= 0) {
read_ssl = 1;
write_tty = 0;
}
} else if (ssl_pending || FD_ISSET(SSL_get_fd(con), &readfds)) {
#ifdef RENEG
{
static int iiii;
if (++iiii == 52) {
SSL_renegotiate(con);
iiii = 0;
}
}
#endif
k = SSL_read(con, sbuf, 1024 /* BUFSIZZ */ );
switch (SSL_get_error(con, k)) {
case SSL_ERROR_NONE:
if (k <= 0)
goto end;
sbuf_off = 0;
sbuf_len = k;
read_ssl = 0;
write_tty = 1;
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out, "read W BLOCK\n");
write_ssl = 1;
read_tty = 0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out, "read R BLOCK\n");
write_tty = 0;
read_ssl = 1;
if ((read_tty == 0) && (write_ssl == 0))
write_ssl = 1;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out, "read X BLOCK\n");
break;
case SSL_ERROR_SYSCALL:
ret = errno;
BIO_printf(bio_err, "read:errno=%d\n", ret);
goto shut;
case SSL_ERROR_ZERO_RETURN:
BIO_printf(bio_c_out, "closed\n");
ret = 0;
goto shut;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
/* break; */
}
} else if (FD_ISSET(fileno(stdin), &readfds)) {
if (crlf) {
int j, lf_num;
i = read(fileno(stdin), cbuf, BUFSIZZ / 2);
lf_num = 0;
/* both loops are skipped when i <= 0 */
for (j = 0; j < i; j++)
if (cbuf[j] == '\n')
lf_num++;
for (j = i - 1; j >= 0; j--) {
cbuf[j + lf_num] = cbuf[j];
if (cbuf[j] == '\n') {
lf_num--;
i++;
cbuf[j + lf_num] = '\r';
}
}
assert(lf_num == 0);
} else
i = read(fileno(stdin), cbuf, BUFSIZZ);
if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q'))) {
BIO_printf(bio_err, "DONE\n");
ret = 0;
goto shut;
}
if ((!c_ign_eof) && (cbuf[0] == 'R')) {
BIO_printf(bio_err, "RENEGOTIATING\n");
SSL_renegotiate(con);
cbuf_len = 0;
} else {
cbuf_len = i;
cbuf_off = 0;
}
write_ssl = 1;
read_tty = 0;
}
}
ret = 0;
shut:
if (in_init)
print_stuff(bio_c_out, con, full_log);
SSL_shutdown(con);
shutdown(SSL_get_fd(con), SHUT_RD);
close(SSL_get_fd(con));
end:
if (con != NULL) {
if (prexit != 0)
print_stuff(bio_c_out, con, 1);
SSL_free(con);
}
#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
free(next_proto.data);
#endif
if (ctx != NULL)
SSL_CTX_free(ctx);
if (cert)
X509_free(cert);
if (key)
EVP_PKEY_free(key);
free(pass);
if (vpm)
X509_VERIFY_PARAM_free(vpm);
if (cbuf != NULL) {
OPENSSL_cleanse(cbuf, BUFSIZZ);
free(cbuf);
}
if (sbuf != NULL) {
OPENSSL_cleanse(sbuf, BUFSIZZ);
free(sbuf);
}
if (mbuf != NULL) {
OPENSSL_cleanse(mbuf, BUFSIZZ);
free(mbuf);
}
if (bio_c_out != NULL) {
BIO_free(bio_c_out);
bio_c_out = NULL;
}
return (ret);
}
int callback_http(struct lws *wsi, enum lws_callback_reasons reason, void *user,
void *in, size_t len)
{
struct per_session_data__http *pss =
(struct per_session_data__http *)user;
unsigned char buffer[4096 + LWS_PRE];
unsigned long amount, file_len, sent;
char leaf_path[1024];
const char *mimetype;
char *other_headers;
unsigned char *end, *start;
struct timeval tv;
unsigned char *p;
#ifndef LWS_NO_CLIENT
struct per_session_data__http *pss1;
struct lws *wsi1;
#endif
char buf[256];
char b64[64];
int n, m;
#ifdef EXTERNAL_POLL
struct lws_pollargs *pa = (struct lws_pollargs *)in;
#endif
switch (reason) {
case LWS_CALLBACK_HTTP:
lwsl_info("lws_http_serve: %s\n",in);
if (debug_level & LLL_INFO) {
dump_handshake_info(wsi);
/* dump the individual URI Arg parameters */
n = 0;
while (lws_hdr_copy_fragment(wsi, buf, sizeof(buf),
WSI_TOKEN_HTTP_URI_ARGS, n) > 0) {
lwsl_notice("URI Arg %d: %s\n", ++n, buf);
}
}
{
lws_get_peer_simple(wsi, buf, sizeof(buf));
lwsl_info("HTTP connect from %s\n", buf);
}
if (len < 1) {
lws_return_http_status(wsi,
HTTP_STATUS_BAD_REQUEST, NULL);
goto try_to_reuse;
}
#ifndef LWS_NO_CLIENT
if (!strncmp(in, "/proxytest", 10)) {
struct lws_client_connect_info i;
char *rootpath = "/";
const char *p = (const char *)in;
if (lws_get_child(wsi))
break;
pss->client_finished = 0;
memset(&i,0, sizeof(i));
i.context = lws_get_context(wsi);
i.address = "git.libwebsockets.org";
i.port = 80;
i.ssl_connection = 0;
if (p[10])
i.path = (char *)in + 10;
else
i.path = rootpath;
i.host = "git.libwebsockets.org";
i.origin = NULL;
i.method = "GET";
i.parent_wsi = wsi;
i.uri_replace_from = "git.libwebsockets.org/";
i.uri_replace_to = "/proxytest/";
if (!lws_client_connect_via_info(&i)) {
lwsl_err("proxy connect fail\n");
break;
}
break;
}
#endif
#if 1
/* this example server has no concept of directories */
if (strchr((const char *)in + 1, '/')) {
lws_return_http_status(wsi, HTTP_STATUS_NOT_ACCEPTABLE, NULL);
goto try_to_reuse;
}
#endif
/* if a legal POST URL, let it continue and accept data */
if (lws_hdr_total_length(wsi, WSI_TOKEN_POST_URI))
return 0;
/* check for the "send a big file by hand" example case */
if (!strcmp((const char *)in, "/leaf.jpg")) {
if (strlen(resource_path) > sizeof(leaf_path) - 10)
return -1;
sprintf(leaf_path, "%s/leaf.jpg", resource_path);
/* well, let's demonstrate how to send the hard way */
p = buffer + LWS_PRE;
end = p + sizeof(buffer) - LWS_PRE;
pss->fd = lws_plat_file_open(wsi, leaf_path, &file_len,
LWS_O_RDONLY);
if (pss->fd == LWS_INVALID_FILE) {
lwsl_err("failed to open file %s\n", leaf_path);
return -1;
}
/*
* we will send a big jpeg file, but it could be
* anything. Set the Content-Type: appropriately
* so the browser knows what to do with it.
*
* Notice we use the APIs to build the header, which
* will do the right thing for HTTP 1/1.1 and HTTP2
* depending on what connection it happens to be working
* on
*/
if (lws_add_http_header_status(wsi, 200, &p, end))
return 1;
if (lws_add_http_header_by_token(wsi, WSI_TOKEN_HTTP_SERVER,
(unsigned char *)"libwebsockets",
13, &p, end))
return 1;
if (lws_add_http_header_by_token(wsi,
WSI_TOKEN_HTTP_CONTENT_TYPE,
(unsigned char *)"image/jpeg",
10, &p, end))
return 1;
if (lws_add_http_header_content_length(wsi,
file_len, &p,
end))
return 1;
if (lws_finalize_http_header(wsi, &p, end))
return 1;
/*
* send the http headers...
* this won't block since it's the first payload sent
* on the connection since it was established
* (too small for partial)
*
* Notice they are sent using LWS_WRITE_HTTP_HEADERS
* which also means you can't send body too in one step,
* this is mandated by changes in HTTP2
*/
*p = '\0';
lwsl_info("%s\n", buffer + LWS_PRE);
n = lws_write(wsi, buffer + LWS_PRE,
p - (buffer + LWS_PRE),
LWS_WRITE_HTTP_HEADERS);
if (n < 0) {
lws_plat_file_close(wsi, pss->fd);
return -1;
}
/*
* book us a LWS_CALLBACK_HTTP_WRITEABLE callback
*/
lws_callback_on_writable(wsi);
break;
}
/* if not, send a file the easy way */
if (!strncmp(in, "/cgit-data/", 11)) {
in = (char *)in + 11;
strcpy(buf, "/usr/share/cgit");
} else
strcpy(buf, resource_path);
if (strcmp(in, "/")) {
if (*((const char *)in) != '/')
strcat(buf, "/");
strncat(buf, in, sizeof(buf) - strlen(buf) - 1);
} else /* default file to serve */
strcat(buf, "/test.html");
buf[sizeof(buf) - 1] = '\0';
/* refuse to serve files we don't understand */
mimetype = get_mimetype(buf);
if (!mimetype) {
lwsl_err("Unknown mimetype for %s\n", buf);
lws_return_http_status(wsi,
HTTP_STATUS_UNSUPPORTED_MEDIA_TYPE, NULL);
return -1;
}
/* demonstrates how to set a cookie on / */
other_headers = leaf_path;
p = (unsigned char *)leaf_path;
if (!strcmp((const char *)in, "/") &&
!lws_hdr_total_length(wsi, WSI_TOKEN_HTTP_COOKIE)) {
/* this isn't very unguessable but it'll do for us */
gettimeofday(&tv, NULL);
n = sprintf(b64, "test=LWS_%u_%u_COOKIE;Max-Age=360000",
(unsigned int)tv.tv_sec,
(unsigned int)tv.tv_usec);
if (lws_add_http_header_by_name(wsi,
(unsigned char *)"set-cookie:",
(unsigned char *)b64, n, &p,
(unsigned char *)leaf_path + sizeof(leaf_path)))
return 1;
}
if (lws_is_ssl(wsi) && lws_add_http_header_by_name(wsi,
(unsigned char *)
"Strict-Transport-Security:",
(unsigned char *)
"max-age=15768000 ; "
"includeSubDomains", 36, &p,
(unsigned char *)leaf_path +
sizeof(leaf_path)))
return 1;
n = (char *)p - leaf_path;
n = lws_serve_http_file(wsi, buf, mimetype, other_headers, n);
if (n < 0 || ((n > 0) && lws_http_transaction_completed(wsi)))
return -1; /* error or can't reuse connection: close the socket */
/*
* notice that the sending of the file completes asynchronously,
* we'll get a LWS_CALLBACK_HTTP_FILE_COMPLETION callback when
* it's done
*/
break;
case LWS_CALLBACK_HTTP_BODY:
/* create the POST argument parser if not already existing */
if (!pss->spa) {
pss->spa = lws_spa_create(wsi, param_names,
ARRAY_SIZE(param_names), 1024,
file_upload_cb, pss);
if (!pss->spa)
return -1;
pss->filename[0] = '\0';
pss->file_length = 0;
}
/* let it parse the POST data */
if (lws_spa_process(pss->spa, in, len))
return -1;
break;
case LWS_CALLBACK_HTTP_BODY_COMPLETION:
lwsl_debug("LWS_CALLBACK_HTTP_BODY_COMPLETION\n");
/*
* the whole of the sent body arrived,
* respond to the client with a redirect to show the
* results
*/
/* call to inform no more payload data coming */
lws_spa_finalize(pss->spa);
p = (unsigned char *)pss->result + LWS_PRE;
end = p + sizeof(pss->result) - LWS_PRE - 1;
p += sprintf((char *)p,
"<html><body><h1>Form results (after urldecoding)</h1>"
"<table><tr><td>Name</td><td>Length</td><td>Value</td></tr>");
for (n = 0; n < ARRAY_SIZE(param_names); n++)
p += lws_snprintf((char *)p, end - p,
"<tr><td><b>%s</b></td><td>%d</td><td>%s</td></tr>",
param_names[n],
lws_spa_get_length(pss->spa, n),
lws_spa_get_string(pss->spa, n));
p += lws_snprintf((char *)p, end - p, "</table><br><b>filename:</b> %s, <b>length</b> %ld",
pss->filename, pss->file_length);
p += lws_snprintf((char *)p, end - p, "</body></html>");
pss->result_len = p - (unsigned char *)(pss->result + LWS_PRE);
p = buffer + LWS_PRE;
start = p;
end = p + sizeof(buffer) - LWS_PRE;
if (lws_add_http_header_status(wsi, 200, &p, end))
return 1;
if (lws_add_http_header_by_token(wsi, WSI_TOKEN_HTTP_CONTENT_TYPE,
(unsigned char *)"text/html", 9, &p, end))
return 1;
if (lws_add_http_header_content_length(wsi, pss->result_len, &p, end))
return 1;
if (lws_finalize_http_header(wsi, &p, end))
return 1;
n = lws_write(wsi, start, p - start, LWS_WRITE_HTTP_HEADERS);
if (n < 0)
return 1;
n = lws_write(wsi, (unsigned char *)pss->result + LWS_PRE,
pss->result_len, LWS_WRITE_HTTP);
if (n < 0)
return 1;
goto try_to_reuse;
case LWS_CALLBACK_HTTP_DROP_PROTOCOL:
lwsl_debug("LWS_CALLBACK_HTTP_DROP_PROTOCOL\n");
/* called when our wsi user_space is going to be destroyed */
if (pss->spa) {
lws_spa_destroy(pss->spa);
pss->spa = NULL;
}
break;
case LWS_CALLBACK_HTTP_FILE_COMPLETION:
goto try_to_reuse;
case LWS_CALLBACK_HTTP_WRITEABLE:
lwsl_info("LWS_CALLBACK_HTTP_WRITEABLE\n");
if (pss->client_finished)
return -1;
if (pss->fd == LWS_INVALID_FILE)
goto try_to_reuse;
#ifndef LWS_NO_CLIENT
if (pss->reason_bf & 2) {
char *px = buf + LWS_PRE;
int lenx = sizeof(buf) - LWS_PRE;
/*
* our sink is writeable and our source has something
* to read. So read a lump of source material of
* suitable size to send or what's available, whichever
* is the smaller.
*/
pss->reason_bf &= ~2;
wsi1 = lws_get_child(wsi);
if (!wsi1)
break;
if (lws_http_client_read(wsi1, &px, &lenx) < 0)
goto bail;
if (pss->client_finished)
return -1;
break;
}
#endif
/*
* we can send more of whatever it is we were sending
*/
sent = 0;
do {
/* we'd like the send this much */
n = sizeof(buffer) - LWS_PRE;
/* but if the peer told us he wants less, we can adapt */
m = lws_get_peer_write_allowance(wsi);
/* -1 means not using a protocol that has this info */
if (m == 0)
/* right now, peer can't handle anything */
goto later;
if (m != -1 && m < n)
/* he couldn't handle that much */
n = m;
n = lws_plat_file_read(wsi, pss->fd,
&amount, buffer + LWS_PRE, n);
/* problem reading, close conn */
if (n < 0) {
lwsl_err("problem reading file\n");
goto bail;
}
n = (int)amount;
/* sent it all, close conn */
if (n == 0)
goto penultimate;
/*
* To support HTTP2, must take care about preamble space
*
* identification of when we send the last payload frame
* is handled by the library itself if you sent a
* content-length header
*/
m = lws_write(wsi, buffer + LWS_PRE, n, LWS_WRITE_HTTP);
if (m < 0) {
lwsl_err("write failed\n");
/* write failed, close conn */
goto bail;
}
if (m) /* while still active, extend timeout */
lws_set_timeout(wsi, PENDING_TIMEOUT_HTTP_CONTENT, 5);
sent += m;
} while (!lws_send_pipe_choked(wsi) && (sent < 1024 * 1024));
later:
lws_callback_on_writable(wsi);
break;
penultimate:
lws_plat_file_close(wsi, pss->fd);
pss->fd = LWS_INVALID_FILE;
goto try_to_reuse;
bail:
lws_plat_file_close(wsi, pss->fd);
return -1;
/*
* callback for confirming to continue with client IP appear in
* protocol 0 callback since no websocket protocol has been agreed
* yet. You can just ignore this if you won't filter on client IP
* since the default unhandled callback return is 0 meaning let the
* connection continue.
*/
case LWS_CALLBACK_FILTER_NETWORK_CONNECTION:
/* if we returned non-zero from here, we kill the connection */
break;
#ifndef LWS_NO_CLIENT
case LWS_CALLBACK_ESTABLISHED_CLIENT_HTTP: {
char ctype[64], ctlen = 0;
lwsl_err("LWS_CALLBACK_ESTABLISHED_CLIENT_HTTP\n");
p = buffer + LWS_PRE;
end = p + sizeof(buffer) - LWS_PRE;
if (lws_add_http_header_status(lws_get_parent(wsi), 200, &p, end))
return 1;
if (lws_add_http_header_by_token(lws_get_parent(wsi),
WSI_TOKEN_HTTP_SERVER,
(unsigned char *)"libwebsockets",
13, &p, end))
return 1;
ctlen = lws_hdr_copy(wsi, ctype, sizeof(ctype), WSI_TOKEN_HTTP_CONTENT_TYPE);
if (ctlen > 0) {
if (lws_add_http_header_by_token(lws_get_parent(wsi),
WSI_TOKEN_HTTP_CONTENT_TYPE,
(unsigned char *)ctype, ctlen, &p, end))
return 1;
}
#if 0
if (lws_add_http_header_content_length(lws_get_parent(wsi),
file_len, &p, end))
return 1;
#endif
if (lws_finalize_http_header(lws_get_parent(wsi), &p, end))
return 1;
*p = '\0';
lwsl_info("%s\n", buffer + LWS_PRE);
n = lws_write(lws_get_parent(wsi), buffer + LWS_PRE,
p - (buffer + LWS_PRE),
LWS_WRITE_HTTP_HEADERS);
if (n < 0)
return -1;
break; }
case LWS_CALLBACK_CLOSED_CLIENT_HTTP:
//lwsl_err("LWS_CALLBACK_CLOSED_CLIENT_HTTP\n");
return -1;
break;
case LWS_CALLBACK_RECEIVE_CLIENT_HTTP:
//lwsl_err("LWS_CALLBACK_RECEIVE_CLIENT_HTTP: wsi %p\n", wsi);
assert(lws_get_parent(wsi));
if (!lws_get_parent(wsi))
break;
// lwsl_err("LWS_CALLBACK_RECEIVE_CLIENT_HTTP: wsi %p: sock: %d, parent_wsi: %p, parent_sock:%d, len %d\n",
// wsi, lws_get_socket_fd(wsi),
// lws_get_parent(wsi),
// lws_get_socket_fd(lws_get_parent(wsi)), len);
pss1 = lws_wsi_user(lws_get_parent(wsi));
pss1->reason_bf |= 2;
lws_callback_on_writable(lws_get_parent(wsi));
break;
case LWS_CALLBACK_RECEIVE_CLIENT_HTTP_READ:
//lwsl_err("LWS_CALLBACK_RECEIVE_CLIENT_HTTP_READ len %d\n", len);
assert(lws_get_parent(wsi));
m = lws_write(lws_get_parent(wsi), (unsigned char *)in,
len, LWS_WRITE_HTTP);
if (m < 0)
return -1;
break;
case LWS_CALLBACK_COMPLETED_CLIENT_HTTP:
//lwsl_err("LWS_CALLBACK_COMPLETED_CLIENT_HTTP\n");
assert(lws_get_parent(wsi));
if (!lws_get_parent(wsi))
break;
pss1 = lws_wsi_user(lws_get_parent(wsi));
pss1->client_finished = 1;
break;
#endif
/*
* callbacks for managing the external poll() array appear in
* protocol 0 callback
*/
case LWS_CALLBACK_LOCK_POLL:
/*
* lock mutex to protect pollfd state
* called before any other POLL related callback
* if protecting wsi lifecycle change, len == 1
*/
test_server_lock(len);
break;
case LWS_CALLBACK_UNLOCK_POLL:
/*
* unlock mutex to protect pollfd state when
* called after any other POLL related callback
* if protecting wsi lifecycle change, len == 1
*/
test_server_unlock(len);
break;
#ifdef EXTERNAL_POLL
case LWS_CALLBACK_ADD_POLL_FD:
if (count_pollfds >= max_poll_elements) {
lwsl_err("LWS_CALLBACK_ADD_POLL_FD: too many sockets to track\n");
return 1;
}
fd_lookup[pa->fd] = count_pollfds;
pollfds[count_pollfds].fd = pa->fd;
pollfds[count_pollfds].events = pa->events;
pollfds[count_pollfds++].revents = 0;
break;
case LWS_CALLBACK_DEL_POLL_FD:
if (!--count_pollfds)
break;
m = fd_lookup[pa->fd];
/* have the last guy take up the vacant slot */
pollfds[m] = pollfds[count_pollfds];
fd_lookup[pollfds[count_pollfds].fd] = m;
break;
case LWS_CALLBACK_CHANGE_MODE_POLL_FD:
pollfds[fd_lookup[pa->fd]].events = pa->events;
break;
#endif
case LWS_CALLBACK_GET_THREAD_ID:
/*
* if you will call "lws_callback_on_writable"
* from a different thread, return the caller thread ID
* here so lws can use this information to work out if it
* should signal the poll() loop to exit and restart early
*/
/* return pthread_getthreadid_np(); */
break;
#if defined(LWS_USE_POLARSSL)
#else
#if defined(LWS_USE_MBEDTLS)
#else
#if defined(LWS_OPENSSL_SUPPORT)
case LWS_CALLBACK_OPENSSL_PERFORM_CLIENT_CERT_VERIFICATION:
/* Verify the client certificate */
if (!len || (SSL_get_verify_result((SSL*)in) != X509_V_OK)) {
int err = X509_STORE_CTX_get_error((X509_STORE_CTX*)user);
int depth = X509_STORE_CTX_get_error_depth((X509_STORE_CTX*)user);
const char* msg = X509_verify_cert_error_string(err);
lwsl_err("LWS_CALLBACK_OPENSSL_PERFORM_CLIENT_CERT_VERIFICATION: SSL error: %s (%d), depth: %d\n", msg, err, depth);
return 1;
}
break;
#if defined(LWS_HAVE_SSL_CTX_set1_param)
case LWS_CALLBACK_OPENSSL_LOAD_EXTRA_SERVER_VERIFY_CERTS:
if (crl_path[0]) {
/* Enable CRL checking */
X509_VERIFY_PARAM *param = X509_VERIFY_PARAM_new();
X509_VERIFY_PARAM_set_flags(param, X509_V_FLAG_CRL_CHECK);
SSL_CTX_set1_param((SSL_CTX*)user, param);
X509_STORE *store = SSL_CTX_get_cert_store((SSL_CTX*)user);
X509_LOOKUP *lookup = X509_STORE_add_lookup(store, X509_LOOKUP_file());
n = X509_load_cert_crl_file(lookup, crl_path, X509_FILETYPE_PEM);
X509_VERIFY_PARAM_free(param);
if (n != 1) {
char errbuf[256];
n = ERR_get_error();
lwsl_err("LWS_CALLBACK_OPENSSL_LOAD_EXTRA_SERVER_VERIFY_CERTS: SSL error: %s (%d)\n", ERR_error_string(n, errbuf), n);
return 1;
}
}
break;
#endif
#endif
#endif
#endif
default:
break;
}
return 0;
/* if we're on HTTP1.1 or 2.0, will keep the idle connection alive */
try_to_reuse:
if (lws_http_transaction_completed(wsi))
return -1;
return 0;
}
MONO_API int
mono_btls_ssl_ctx_set_verify_param (MonoBtlsSslCtx *ctx, const MonoBtlsX509VerifyParam *param)
{
return SSL_CTX_set1_param (ctx->ctx, mono_btls_x509_verify_param_peek_param (param));
}
static int load_crl(SSL_CTX * ctx, char *crl_directory, int crl_check_all)
{
#if OPENSSL_VERSION_NUMBER >= 0x10000000L
DIR *d;
struct dirent *dir;
int crl_added = 0;
LM_DBG("Loading CRL from directory\n");
/*Get X509 store from SSL context*/
X509_STORE *store = SSL_CTX_get_cert_store(ctx);
if(!store) {
LM_ERR("Unable to get X509 store from ssl context\n");
return -1;
}
/*Parse directory*/
d = opendir(crl_directory);
if(!d) {
LM_ERR("Unable to open crl directory '%s'\n", crl_directory);
return -1;
}
while ((dir = readdir(d)) != NULL) {
/*Skip if not regular file*/
if (dir->d_type != DT_REG)
continue;
/*Create filename*/
char* filename = (char*) pkg_malloc(sizeof(char)*(strlen(crl_directory)+strlen(dir->d_name)+2));
if (!filename) {
LM_ERR("Unable to allocate crl filename\n");
closedir(d);
return -1;
}
strcpy(filename,crl_directory);
if(filename[strlen(filename)-1] != '/')
strcat(filename,"/");
strcat(filename,dir->d_name);
/*Get CRL content*/
FILE *fp = fopen(filename,"r");
pkg_free(filename);
if(!fp)
continue;
X509_CRL *crl = PEM_read_X509_CRL(fp, NULL, NULL, NULL);
fclose(fp);
if(!crl)
continue;
/*Add CRL to X509 store*/
if (X509_STORE_add_crl(store, crl) == 1)
crl_added++;
else
LM_ERR("Unable to add crl to ssl context\n");
X509_CRL_free(crl);
}
closedir(d);
if (!crl_added) {
LM_ERR("No suitable CRL files found in directory %s\n", crl_directory);
return -1;
}
/*Enable CRL checking*/
X509_VERIFY_PARAM *param;
param = X509_VERIFY_PARAM_new();
int flags = X509_V_FLAG_CRL_CHECK;
if(crl_check_all)
flags |= X509_V_FLAG_CRL_CHECK_ALL;
X509_VERIFY_PARAM_set_flags(param, flags);
SSL_CTX_set1_param(ctx, param);
X509_VERIFY_PARAM_free(param);
return 0;
#else
static int already_warned = 0;
if (!already_warned) {
LM_WARN("CRL not supported in %s\n", OPENSSL_VERSION_TEXT);
already_warned = 1;
}
return 0;
#endif
}
