コード例 #1
0
static void
tftp_test(struct bootp *bp)
{
    int res;
    int server1_id = 0;
    int server2_id = 0;
    int server3_id = 0;

    extern struct tftpd_fileops dummy_fileops;

    server1_id = tftpd_start(0, &dummy_fileops);
    if (server1_id > 0) {
      diag_printf("TFTP server created - id: %x\n", server1_id);
    } else {
      diag_printf("Couldn't create first server!\n");
    }

#ifdef CYGSEM_NET_TFTPD_MULTITHREADED
    server2_id = tftpd_start(0, &dummy_fileops);
    if (server2_id > 0) {
      diag_printf("Second TFTP server created - id: %x\n", server2_id);
    } else {
      diag_printf("Couldn't create a second server!\n");
    }
#if CYGNUM_NET_TFTPD_MULTITHREADED_PORTS > 1
    server3_id = tftpd_start(1025, &dummy_fileops);
    if (server3_id > 0) {
      diag_printf("Third TFTP server created - id: %x\n", server3_id);
    } else {
      diag_printf("Couldn't create a third server!\n");
    }
#endif //CYGNUM_NET_TFTPD_MULTITHREADED_PORTS > 1
#else  //CYGSEM_NET_TFTPD_MULTITHREADED
    server2_id = tftpd_start(1025, &dummy_fileops);
    if (server2_id > 0) {
      diag_printf("Second TFTP server created - id: %x\n", server2_id);
    } else {
      diag_printf("Couldn't create a second server!\n");
    }
#endif //!CYGSEM_NET_TFTPD_MULTITHREADED
    
    // Only let the server run for 5 minutes
    cyg_thread_delay(2*100); // let the tftpd start up first
    TNR_ON();
    cyg_thread_delay(5*60*100);
    TNR_OFF();
    
    if (server1_id > 0) {
      res = tftpd_stop(server1_id);
      diag_printf("TFTP server - id: %x stopped - res: %d\n", server1_id, res);
    }
    if (server2_id > 0) {
      res = tftpd_stop(server2_id);
      diag_printf("TFTP server - id: %x stopped - res: %d\n", server2_id, res);
    }
    if (server3_id > 0) {
      res = tftpd_stop(server2_id);
      diag_printf("TFTP server - id: %x stopped - res: %d\n", server2_id, res);
    }
} 
コード例 #2
0
ファイル: tcp_echo.c プロジェクト: LucidOne/Rovio
void
pexit(char *s)
{
    TNR_OFF();
    perror(s);
    cyg_test_exit();
}
コード例 #3
0
ファイル: snmpmulti.c プロジェクト: Palantir555/ecos-mars-zx3
void
net_test(cyg_addrword_t param)
{
    extern void cyg_net_snmp_init(void);

    CYG_TEST_INIT();
    CYG_TEST_INFO("Start multiple SNMP server test");
    init_all_network_interfaces();

    autohost_init();

    cyg_net_snmp_init();

    TNR_INIT();
    
    // Now command the host to do ping to us...
#ifdef CYGHWR_NET_DRIVER_ETH0
    if (eth0_up) {
        do_snmp_tests(&eth0_bootp_data, 3, TESTTIME);
    }
#endif
#ifdef CYGHWR_NET_DRIVER_ETH1
    if (eth1_up) {
        do_snmp_tests(&eth1_bootp_data, 3, TESTTIME);
    }
#endif
    // Let the server run for 5 minutes
    cyg_thread_delay(2*100); // let the stuff start up first
    TNR_ON();
    cyg_thread_delay(TESTTIME*100); // FIXME - assume cS clock.
    // Additional delay 'cos host may be slower than us - and it has to
    // complete a transfer anyway:
    cyg_thread_delay(  30    *100); // FIXME - assume cS clock.
    TNR_OFF();

    autohost_end( 3 * (0
#ifdef CYGHWR_NET_DRIVER_ETH0
                  + eth0_up
#endif
#ifdef CYGHWR_NET_DRIVER_ETH1
                  + eth1_up
#endif
        ) ); // check for N pass messages from hosts

    TNR_PRINT_ACTIVITY();
    CYG_TEST_EXIT("Done");
}
コード例 #4
0
ファイル: tftp_server_test.c プロジェクト: LucidOne/Rovio
static void
tftp_test(struct bootp *bp)
{
    int server_id, res;
    extern struct tftpd_fileops dummy_fileops;
    server_id = tftpd_start(0, &dummy_fileops);
    if (server_id > 0) {
        diag_printf("TFTP server created - id: %x\n", server_id);
        // Only let the server run for 5 minutes
        cyg_thread_delay(2*100); // let the tftpd start up first
        TNR_ON();
        cyg_thread_delay(5*60*100);
        TNR_OFF();
        res = tftpd_stop(server_id);
        diag_printf("TFTP server stopped - res: %d\n", res);
    } else {
        diag_printf("Couldn't create a server!\n");
    }
}
コード例 #5
0
ファイル: host_echo.c プロジェクト: Palantir555/ecos-mars-zx3
static void
echo_test(void * p)
{
    int s_source, s_sink, e_source, e_sink;
    struct sockaddr_in e_source_addr, e_sink_addr, local;
    int one = 1;
    fd_set in_fds;
    int i, num, len;
    struct test_params params,nparams;
    struct test_status status,nstatus;

    s_source = socket(AF_INET, SOCK_STREAM, 0);
    if (s_source < 0) {
        pexit("stream socket");
    }
    if (setsockopt(s_source, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one))) {
        pexit("setsockopt /source/ SO_REUSEADDR");
    }
    memset(&local, 0, sizeof(local));
    local.sin_family = AF_INET;
//    local.sin_len = sizeof(local);
    local.sin_port = ntohs(SOURCE_PORT);
    local.sin_addr.s_addr = INADDR_ANY;
    if(bind(s_source, (struct sockaddr *) &local, sizeof(local)) < 0) {
        pexit("bind /source/ error");
    }
    listen(s_source, SOMAXCONN);

    s_sink = socket(AF_INET, SOCK_STREAM, 0);
    if (s_sink < 0) {
        pexit("stream socket");
    }
    memset(&local, 0, sizeof(local));
    local.sin_family = AF_INET;
//    local.sin_len = sizeof(local);
    local.sin_port = ntohs(SINK_PORT);
    local.sin_addr.s_addr = INADDR_ANY;
    if(bind(s_sink, (struct sockaddr *) &local, sizeof(local)) < 0) {
        pexit("bind /sink/ error");
    }
    if (setsockopt(s_sink, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one))) {
        pexit("setsockopt /sink/ SO_REUSEADDR");
    }
    listen(s_sink, SOMAXCONN);

    e_source = 0;  e_sink = 0;
    while (true) {
        // Wait for a connection on either of the ports
        FD_ZERO(&in_fds);
        FD_SET(s_source, &in_fds);
        FD_SET(s_sink, &in_fds);
        num = select(max(s_sink,s_source)+1, &in_fds, 0, 0, 0);
        if (FD_ISSET(s_source, &in_fds)) {
            len = sizeof(e_source_addr);
            if ((e_source = accept(s_source, (struct sockaddr *)&e_source_addr, &len)) < 0) {
                pexit("accept /source/");
            }
            diag_printf("SOURCE connection from %s:%d\n", 
                        inet_ntoa(e_source_addr.sin_addr), ntohs(e_source_addr.sin_port));
        }
        if (FD_ISSET(s_sink, &in_fds)) {
            len = sizeof(e_sink_addr);
            if ((e_sink = accept(s_sink, (struct sockaddr *)&e_sink_addr, &len)) < 0) {
                pexit("accept /sink/");
            }
            diag_printf("SINK connection from %s:%d\n", 
                        inet_ntoa(e_sink_addr.sin_addr), ntohs(e_sink_addr.sin_port));
        }
        // Continue with test once a connection is established in both directions
        if ((e_source != 0) && (e_sink != 0)) {
            break;
        }
    }

    // Wait for "source" to tell us the testing paramters
    if (do_read(e_source, &nparams, sizeof(nparams)) != sizeof(nparams)) {
        pexit("Can't read initialization parameters");
    }
  
    params.nbufs = ntohl(nparams.nbufs);
    params.bufsize = ntohl(nparams.bufsize);
    params.load = ntohl(nparams.load);
  
    diag_printf("Using %d buffers of %d bytes each, %d%% background load\n", 
                params.nbufs, params.bufsize, params.load);

    // Tell the sink what the parameters are
    if (do_write(e_sink, &nparams, sizeof(nparams)) != sizeof(nparams)) {
        pexit("Can't write initialization parameters");
    }

    status.ok = 1;
    nstatus.ok = htonl(status.ok);
  
    // Tell the "source" to start - we're all connected and ready to go!
    if (do_write(e_source, &nstatus, sizeof(nstatus)) != sizeof(nstatus)) {
        pexit("Can't send ACK to 'source' host");
    }

    TNR_ON();

    // Echo the data from the source to the sink hosts
    for (i = 0;  i < params.nbufs;  i++) {
        if ((len = do_read(e_source, data_buf, params.bufsize)) != params.bufsize) {
            TNR_OFF();
            diag_printf("Can't read buf #%d: ", i+1);
            if (len < 0) {
                perror("I/O error");
            } else {
                diag_printf("short read - only %d bytes\n", len);
            }
            TNR_ON();
        }
        if ((len = do_write(e_sink, data_buf, params.bufsize)) != params.bufsize) {
            TNR_OFF();
            diag_printf("Can't write buf #%d: ", i+1);
            if (len < 0) {
                perror("I/O error");
            } else {
                diag_printf("short write - only %d bytes\n", len);
            }
            TNR_ON();
        }
    }

    TNR_OFF();

    // Wait for the data to drain and the "sink" to tell us all is OK.
    if (do_read(e_sink, &status, sizeof(status)) != sizeof(status)) {
        pexit("Can't receive ACK from 'sink' host");
    }

}
コード例 #6
0
ファイル: tcp_echo.c プロジェクト: LucidOne/Rovio
static void
echo_test(cyg_addrword_t p)
{
    int s_source, s_sink, e_source, e_sink;
    struct sockaddr_in e_source_addr, e_sink_addr, local;
    int one = 1;
    fd_set in_fds;
    int i, num, len;
    struct test_params params,nparams;
    struct test_status status,nstatus;

    cyg_tick_count_t starttime, stoptime;

    s_source = socket(AF_INET, SOCK_STREAM, 0);
    if (s_source < 0) {
        pexit("stream socket");
    }
    if (setsockopt(s_source, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one))) {
        pexit("setsockopt /source/ SO_REUSEADDR");
    }
    if (setsockopt(s_source, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one))) {
        pexit("setsockopt /source/ SO_REUSEPORT");
    }
    memset(&local, 0, sizeof(local));
    local.sin_family = AF_INET;
    local.sin_len = sizeof(local);
    local.sin_port = ntohs(SOURCE_PORT);
    local.sin_addr.s_addr = INADDR_ANY;
    if(bind(s_source, (struct sockaddr *) &local, sizeof(local)) < 0) {
        pexit("bind /source/ error");
    }
    listen(s_source, SOMAXCONN);

    s_sink = socket(AF_INET, SOCK_STREAM, 0);
    if (s_sink < 0) {
        pexit("stream socket");
    }
    memset(&local, 0, sizeof(local));
    local.sin_family = AF_INET;
    local.sin_len = sizeof(local);
    local.sin_port = ntohs(SINK_PORT);
    local.sin_addr.s_addr = INADDR_ANY;
    if(bind(s_sink, (struct sockaddr *) &local, sizeof(local)) < 0) {
        pexit("bind /sink/ error");
    }
    if (setsockopt(s_sink, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one))) {
        pexit("setsockopt /sink/ SO_REUSEADDR");
    }
    if (setsockopt(s_sink, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one))) {
        pexit("setsockopt /sink/ SO_REUSEPORT");
    }
    listen(s_sink, SOMAXCONN);

    e_source = 0;  e_sink = 0;
    while (true) {
        // Wait for a connection on either of the ports
        FD_ZERO(&in_fds);
        FD_SET(s_source, &in_fds);
        FD_SET(s_sink, &in_fds);
        num = select(max(s_sink,s_source)+1, &in_fds, 0, 0, 0);
        if (FD_ISSET(s_source, &in_fds)) {
            len = sizeof(e_source_addr);
            if ((e_source = accept(s_source, (struct sockaddr *)&e_source_addr, &len)) < 0) {
                pexit("accept /source/");
            }
            diag_printf("SOURCE connection from %s:%d\n", 
                        inet_ntoa(e_source_addr.sin_addr), ntohs(e_source_addr.sin_port));
        }
        if (FD_ISSET(s_sink, &in_fds)) {
            len = sizeof(e_sink_addr);
            if ((e_sink = accept(s_sink, (struct sockaddr *)&e_sink_addr, &len)) < 0) {
                pexit("accept /sink/");
            }
            diag_printf("SINK connection from %s:%d\n", 
                        inet_ntoa(e_sink_addr.sin_addr), ntohs(e_sink_addr.sin_port));
        }
        // Continue with test once a connection is established in both directions
        if ((e_source != 0) && (e_sink != 0)) {
            break;
        }
    }

    // Wait for "source" to tell us the testing paramters
    if (do_read(e_source, &nparams, sizeof(nparams)) != sizeof(nparams)) {
        pexit("Can't read initialization parameters");
    }
  
    params.nbufs = ntohl(nparams.nbufs);
    params.bufsize = ntohl(nparams.bufsize);
    params.load = ntohl(nparams.load);
  
    diag_printf("Using %d buffers of %d bytes each, %d%% background load\n", 
                params.nbufs, params.bufsize, params.load);

    // Tell the sink what the parameters are
    if (do_write(e_sink, &nparams, sizeof(nparams)) != sizeof(nparams)) {
        pexit("Can't write initialization parameters");
    }

    status.ok = 1;
    nstatus.ok = htonl(status.ok);
  
    // Tell the "source" to start - we're all connected and ready to go!
    if (do_write(e_source, &nstatus, sizeof(nstatus)) != sizeof(nstatus)) {
        pexit("Can't send ACK to 'source' host");
    }

    idle_thread_count = 0;
    cyg_semaphore_post(&idle_thread_sem);  // Start idle thread
    starttime = cyg_current_time();
    start_load(params.load);

    TNR_ON();

    // Echo the data from the source to the sink hosts
    for (i = 0;  i < params.nbufs;  i++) {
        if ((len = do_read(e_source, data_buf, params.bufsize)) != params.bufsize) {
            TNR_OFF();
            diag_printf("Can't read buf #%d: ", i+1);
            if (len < 0) {
                perror("I/O error");
            } else {
                diag_printf("short read - only %d bytes\n", len);
            }
            TNR_ON();
        }
        if ((len = do_write(e_sink, data_buf, params.bufsize)) != params.bufsize) {
            TNR_OFF();
            diag_printf("Can't write buf #%d: ", i+1);
            if (len < 0) {
                perror("I/O error");
            } else {
                diag_printf("short write - only %d bytes\n", len);
            }
            TNR_ON();
        }
    }

    TNR_OFF();

    // Wait for the data to drain and the "sink" to tell us all is OK.
    if (do_read(e_sink, &status, sizeof(status)) != sizeof(status)) {
        pexit("Can't receive ACK from 'sink' host");
    }

    start_load(0);
    cyg_semaphore_wait(&idle_thread_sem);  // Stop idle thread
    stoptime = cyg_current_time();
    stoptime -= starttime; // time taken in cS
    // expected idle loops in that time period for an idle system:
    starttime = no_load_idle_count_1_second * stoptime / 100;
    diag_printf( "%d ticks elapsed, %d kloops predicted for an idle system\n",
                 (int)stoptime, (int)(starttime/1000) );
    diag_printf( "actual kloops %d, CPU was %d%% idle during transfer\n",
                 (int)(idle_thread_count/1000),
                 (int)(idle_thread_count * 100 / starttime) );

    // Now examine how close that loading actually was:
    start_load(params.load);              // Start up a given load
    idle_thread_count = 0;
    cyg_semaphore_post(&idle_thread_sem);  // Start idle thread
    cyg_thread_delay(1*100);               // Pause for one second
    cyg_semaphore_wait(&idle_thread_sem);  // Stop idle thread
    start_load(0);                         // Shut down background load
    i = 100 - ((idle_thread_count * 100) / no_load_idle_count_1_second );
    diag_printf("Final load[%d] = %d => %d%%\n", load_thread_level, 
                (int)idle_thread_count, i);

//#ifdef CYGDBG_USE_ASSERTS
#ifdef CYGDBG_NET_TIMING_STATS 
    {
        extern void show_net_times(void);
        show_net_times();
    }
#endif
//#endif
}