int main()
{
Clr_BUFFER_FLAG();
alt_video_display Display;
TOUCH_HANDLE *pTouch;
printf("Hi There !\n");
// Write 0x3C on LED[6:0] through the dedicated custom IP
IOWR(LED_CTRL_BASE, 0x0, 0x3C);
// TOUCH INITIALIZATION
pTouch = Touch_Init(LT24_TOUCH_SPI_BASE, LT24_TOUCH_PENIRQ_N_BASE, LT24_TOUCH_PENIRQ_N_IRQ);
if (!pTouch){
printf("Failed to init touch\r\n");
}else{
printf("Init touch successfully\r\n");
}
// LCD INITIALIZATION
LCD_Init();
// my_GUI
Clr_BUFFER_FLAG();
Display.interlace = 0;
Display.bytes_per_pixel = 2;
Display.color_depth = 16;
Display.height = SCREEN_HEIGHT;
Display.width = SCREEN_WIDTH;
my_GUI(&Display, pTouch);
return 0;
}
void Sys_Init(void)
{
hostInitialized = true;
aptHook(&sysAptCookie, sysAptHook, NULL);
Touch_Init();
Touch_DrawOverlay();
}
/**
* @brief 主函数
* @param 无
* @retval 无
*/
int main(void)
{
/* LED 端口初始化 */
LED_GPIO_Config();
/* 初始化触屏 */
Touch_Init();
/* 初始化定时器 */
SysTick_Init();
/*CRC和emWin没有关系，只是他们为了库的保护而做的，这样STemWin的库只能用在ST的芯片上面，别的芯片是无法使用的。 */
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_CRC, ENABLE);
/* 初始化GUI */
GUI_Init();
/* 初始化串口*/
USART1_Config();
DEBUG("\r\n wildfire ISO board emWin test \r\n");
GUI_Delay (20);
/* 触摸校准demo */
Touch_MainTask();
}
/**
* @brief 主函数
* @param 无
* @retval 无
*/
int main(void)
{
/* 系统定时器 1us 定时初始化 */
SysTick_Init();
LCD_Init();
/* GRAM扫描方向为左下脚->右上角 */
Lcd_GramScan(2);
LCD_Clear(0, 0, 320, 240, BACKGROUND);
/*------------------------------------------------------------------------------------------------------*/
/* 触摸屏IO和中断初始化 */
Touch_Init();
/* 等待触摸屏校正完毕 */
while(Touch_Calibrate() !=0);
/* 触摸取色板初始化 */
Palette_Init();
while( 1 )
{
if(touch_flag == 1) /*如果触笔按下了*/
{
/*获取点的坐标*/
if(Get_touch_point(&display, Read_2046_2(), &touch_para ) !=DISABLE)
{
Palette_draw_point(display.x,display.y);
}
}
}
}
/*
* 初始化液晶，串口，触摸屏，flash及sd卡 *
*/
void ISO_Init(void)
{
uint8_t k;
/* 液晶初始化先于串口，不然会有bug，至于是什么原因我也不知道:( */
LCD_Init();
LCD_Clear(0,0,240,320,WHITE);
LCD_DispStr(20,150,"board init,please wait... ",RED);
USART1_Config();
/* 初始化sd卡文件系统，因为汉字的字库放在了sd卡里面 */
Sd_fs_init();
#ifdef WORD_MODE
/* 显示界面图片 */
Lcd_show_bmp(0, 0,"/boardtest/boardtest.bmp");
#else
/* 显示界面图片 */
Lcd_show_bmp(0, 0,"/boardtest/ISO/ui_boardtest.bmp");
#endif
Lcd_List(1);
/* 初始化外部FLASH */
SPI_FLASH_Init();
//SPI_FLASH_SectorErase(0);
/* 触摸屏IO和中断初始化 */
Touch_Init();
/*-------------------------------------------------------------------------------------------------------*/
#if 1
SPI_FLASH_BufferRead(&cal_flag, 0, 1);
if( cal_flag == 0x55 )
{
SPI_FLASH_BufferRead((void*)cal_p, 1, sizeof(cal_p));
SPI_FLASH_CS_HIGH();
for( k=0; k<6; k++ )
printf("\r\n rx = %LF \r\n",cal_p[k]);
}
else
{
/* 等待触摸屏校正完毕 */
while(Touch_Calibrate() !=0);
}
#elif 0
/* 等待触摸屏校正完毕 */
while(Touch_Calibrate() !=0);
#endif
}
void BSP_Init(void)
{
Key_Init();
LED_Init();
//MyLCD_Init();
Touch_Init();
SysTick_Init();
}
int main(void)
{
// unsigned long x, a, b, c, d;
// char cool[5];
//int i = 0;
SysTick_Init();
ADC_Init(1);
PORTG_Init(1);
PORTD_Init();
PORTA_Init();
PORTF_Init();
PORTB_Init();
PORTE_Init(1);
PORTH_Init();
LCD_Init();
Touch_Init();
Camera_Init();
/* while(1)
{
x = ADC_In();
a = x/1000;
x -= a * 1000;
b = x/100;
x -= b * 100;
c = x/10;
x -= c * 10;
d = x;
cool[0] = (char)(a + 48);
cool[1] = (char)(b + 48);
cool[2] = (char)(c + 48);
cool[3] = (char)(d + 48);
cool[4] = 0;
TFT_Fill(purple);
TFT_Text(&cool[0], 50, 50, 16, black, purple);
}
*/
while(1)
{
GPIO_PORTG_DATA_R ^= 0x04;
if(ADC_In() != 1023)
{
TFT_Fill(yellow);
} else {
TFT_Fill(purple);
}
}
//TFT_H_Line(50,150,50,black);
// return 1;
}
int main(void)
{
u8 key;
u8 i=0;
SystemInit();
delay_init(72); //延时初始化
NVIC_Configuration();
uart_init(9600);
LED_Init();
KEY_Init();
LCD_Init();
POINT_COLOR=RED;//设置字体为蓝色
LCD_ShowString(60,50,"Mini STM32");
LCD_ShowString(60,70,"TOUCH TEST");
LCD_ShowString(60,90,"ATOM@ALIENTEK");
LCD_ShowString(60,110,"2011/1/1");
LCD_ShowString(60,130,"Press KEY0 to Adjust");
Touch_Init();
delay_ms(1500);
Load_Drow_Dialog();
while(1)
{
key=KEY_Scan();
if(Pen_Point.Key_Sta==Key_Down)//触摸屏被按下
{
Pen_Int_Set(0);//关闭中断
do
{
Convert_Pos();
Pen_Point.Key_Sta=Key_Up;
if(Pen_Point.X0>216&&Pen_Point.Y0<16)Load_Drow_Dialog();//清除
else
{
Draw_Big_Point(Pen_Point.X0,Pen_Point.Y0);//画图
GPIOC->ODR|=1<<1; //PC1 上拉
}
}while(PEN==0);//如果PEN一直有效,则一直执行
Pen_Int_Set(1);//开启中断
}else delay_ms(10);
if(key==1)//KEY0按下,则执行校准程序
{
LCD_Clear(WHITE);//清屏
Touch_Adjust(); //屏幕校准
Save_Adjdata();
Load_Drow_Dialog();
}
i++;
if(i==20)
{
i=0;
LED0=!LED0;
}
};
}
int main()
{
Clr_BUFFER_FLAG();
alt_video_display Display;
TOUCH_HANDLE *pTouch;
printf("Hi There !\n");
// Write 0x3C on LED[6:0] through the dedicated custom IP
IOWR(LED_CTRL_BASE, 0x0, 0x3C);
// TOUCH INITIALIZATION
pTouch = Touch_Init(LT24_TOUCH_SPI_BASE, LT24_TOUCH_PENIRQ_N_BASE, LT24_TOUCH_PENIRQ_N_IRQ);
if (!pTouch){
printf("Failed to init touch\r\n");
}else{
printf("Init touch successfully\r\n");
}
// LCD INITIALIZATION
LCD_Init();
// Pattern example
//LCD_Pattern_Horizon();
// Sleep 3s
//usleep(3*1000*1000);
Set_BUFFER_FLAG();
unsigned int X, Y;
unsigned int posTamper =0;
while(1){
if(Touch_GetXY(pTouch, &X, &Y)){
//printf("X: %d Y: %d\n",X,Y);
LCD_WR_DATA(Y);
LCD_WR_REG(X);
//we can modify the character (the image become progressively red when we touch it), we might do the same for the background
IOWR_16DIRECT(PIC_MEM_BASE,posTamper,0xF800);
posTamper++;
}
}
// Painter demo
/*Clr_BUFFER_FLAG();
Display.interlace = 0;
Display.bytes_per_pixel = 2;
Display.color_depth = 16;
Display.height = SCREEN_HEIGHT;
Display.width = SCREEN_WIDTH;
GUI(&Display, pTouch);*/
return 0;
}
/*!
* @brief Initialisation thread. runs once.
*/
void InitThread(void *data)
{
for (;;)
{
OS_SemaphoreWait(InitSemaphore, 0);
Random_Init();
//Switches mate
Switch_Init(S1Callback, (void *) 0, S2Callback, (void *) 0);
Toggle_Init(ToggleModeFinished);
Game_Init(GameModeFinished);
Touch_Init();
//Initialize all the modules
LEDs_Init();
I2C_Init(100000, MODULE_CLOCK);
Accel_Init(&AccelSetup);
PIT_Init(MODULE_CLOCK, &PitCallback, (void *) 0);
PIT_Set(500000000, bFALSE);
PIT_Enable(bTRUE);
Packet_Init(BAUD_RATE, MODULE_CLOCK);
Flash_Init();
CMD_Init();
//Best to do this one last
//TODO: disabled for yellow
RTC_Init((void (*)(void*))OS_SemaphoreSignal, (void *) RtcSemaphore);
Timer_Init();
Timer_Set(&PacketTimer);
Timer_Set(&AccTimer);
CMD_SpecialGetStartupValues();
LEDs_On(LED_ORANGE);
}
}
void Hardware_::Init()
{
BOARD_INIT();
// Resetting because of a brownout power goes down.
// Stay down buddy
if (MCUSR == 4)
PowerOff(); // now in bootloader
Backlight_Init();
Timer_Init();
Accelerometer_Init();
ADC_Init();
USBInit();
Touch_Init();
sei();
// Attach stdout to usb serial
StdOutInit();
}
int main(void){
HeartBeat_Init();
DAC_Init(1024); // initialize with command: Vout = Vref
Timer0A_Init(dt[0]);
LCD_Init();
// Initialize RNG
Random_Init(121213);
// Initialize touchscreen GPIO
Touch_Init();
//lenPush = 1;
//for(i=0; i<50; i=i+1){
InitializeBars();
for(i=0; i<400; i=i+1){
MovingColorBars();
}
for(i=0; i<400; i=i+1){
DestabilizeBars();
}
for(i=0; i<350; i=i+1){
FinishBars();
}
for(i=0; i<1000; i=i+1){
Random4BPPTestSprite();
}
LCD_ColorFill(convertColor(0, 0, 0));
Buttons_Init();
play = 0;
while(1){
if (instrument == 0){
Music_Play(Wave[0], 64, strobePtr, 35);
}
if (instrument == 1){
Music_Play(Trumpet[0], 32, strobePtr, 35);
}
if (instrument == 2){
Music_Play(Flute[0], 32, strobePtr, 35);
}
}
}
/*************************************************************************************
* 函数名称：main()
* 参数 ：void
* 返回值 ：void
* 描述 ：程序主入口main函数
*************************************************************************************/
int main(void)
{
u16 i,j;
u16 t=0;
/*****************************初始化****************************************/ //初始化系统时钟，设置时钟为168Mhz
// LED_Init();
SysTick_Init(168);
TIM4_Init();
// TIM3_init();//pwm
TIM5_PWM_Init();
TIM5_PWM_OUTPUT(40,20,10,50);
COM6_Init(115200);//串口6初始化
bsp_InitDAC();//这样初始化adc和dac不会出问题
bsp_InitADC();
bsp_InitDAC();
TFTLCD_Init();
Touch_Init();
//EXTI_Configuration();
GUI_Init(); //GUI 初始化
GUI_Clear();
Timer2_Init(20); //初始化LED的GPIO配置
WaveTaskCreat();
while(1)
{
if(Wave_updat == 1)
{
Get_Signal();
//Clculate_Signal();
}
Updata_signal();
GUI_Exec();
}
}
/*********************************************************************
*
* LCD_X_DisplayDriver
*
* Function description:
* This function is called by the display driver for several purposes.
* To support the according task the routine needs to be adapted to
* the display controller. Please note that the commands marked with
* 'optional' are not cogently required and should only be adapted if
* the display controller supports these features.
*
* Parameter:
* LayerIndex - Index of layer to be configured
* Cmd - Please refer to the details in the switch statement below
* pData - Pointer to a LCD_X_DATA structure
*
* Return Value:
* < -1 - Error
* -1 - Command not handled
* 0 - Ok
*/
int LCD_X_DisplayDriver(unsigned LayerIndex, unsigned Cmd, void * pData) {
int r;
(void) LayerIndex;
(void) pData;
switch (Cmd) {
case LCD_X_INITCONTROLLER: {
//
// Called during the initialization process in order to set up the
// display controller and put it into operation. If the display
// controller is not initialized by any external routine this needs
// to be adapted by the customer...
//
// ...
Lcd_Init();
Touch_Init();
return 0;
}
default:
r = -1;
}
return r;
}
void AppTaskGUI(void *p_arg)
{
// uint8_t i;
GUI_COLOR Colorsback;
OS_ERR err;
OSTimeGet(&err);
(void) p_arg;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_CRC, ENABLE); // ¿ªÆôCRC ¹¦ÄÜ
Lcd_Init(); // LCD ³õʼ»¯
Touch_Init(); // ÏÔʾÆÁ³õʼ»¯
WM_SetCreateFlags(WM_CF_MEMDEV); // ¿ªÆô ´°¿Ú ÄÚ´æÔÊÐí
GUI_Init(); // £Ç£Õ£É¿ªÊ¼
GUI_Clear(); // ÇåÆÁ
// FistPageDrawLine();
// CPU_SR_ALLOC();
// CPU_CRITICAL_ENTER(); // ½ûÖ¹ÖжÏ
backWIn_init(); //µ÷ÓÃÏÔʾÆÁÏÔʾ½çÃæ
Draw_init();
// GUI_CURSOR_Show(); //ÏÔʾָÕë
pageChangFlag=0;
while(1)
{
if(pageChangFlag)
{
GUI_SelectLayer(1);
GUI_TOUCH_SetLayer(1);
Colorsback=GUI_GetBkColor();
GUI_SetBkColor(GUI_DARKBLUE);
GUI_SetFont(GUI_FONT_8X16);
GUI_DispStringAt("Station : ",10,10);
GUI_DispDec(pageChangFlag,1);
GUI_GotoXY(98,39);
GUI_DispFloat(getInformation[pageChangFlag-1].K_tmp,4);
GUI_GotoXY(98,58);
GUI_DispFloat(getInformation[pageChangFlag-1].K_hemo,4);
GUI_GotoXY(336,39);
GUI_DispFloat(getInformation[pageChangFlag-1].T_tmp,4);
GUI_GotoXY(336,58);
GUI_DispFloat(getInformation[pageChangFlag-1].T_hemp,4);
GUI_SetBkColor(Colorsback);
DrawingNewAnew(pageChangFlag);
COMAND=0x04; // ÏÔʾҳÃæ
DATA=1;
GUI_Delay(100);
}else
{
GUI_SelectLayer(0);
GUI_TOUCH_SetLayer(0);
COMAND=0x04; // ÏÔʾҳÃæ
DATA=0;
showShuJu();
}
GUI_Delay(300);
}
}
/**************************************************************/
//程 序 名： main()
//开 发 者： MingH
//入口参数： 无
//功能说明： 主函数
//**************************************************************/
int main(void)
{
unsigned char err_code;
RCC_Config(); // 时钟初始化配置
Beep_Init(); // 蜂鸣器初始化配置
Touch_Init();
Pcie_Gpio_Init();
Tim3_Init();
RGB_Init(); //RGB 初始化
RCC_GetClocksFreq(&RCC_ClockFreq);
SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK);
USB2Serial_Init(); // 串口初始化配置
Pwm_Init();
Adc_Init();
I2C_GPIO_Configuration();
err_code = LIS3DH_Init();
if (NO_ERROR == err_code)
{
printf("\r\nLIS3DH Init is succeed! \r\n");
}
else
{
printf("\r\nLIS3DH Init is failed! \r\n");
}
RTC_Init(); // RTC 初始化配置
if(SD_Init() == SD_OK) {
printf ("\r\n发现SD卡!\r\n");
}
else {
printf("\r\n没有发现 SD 卡设备! \r\n");
}
printf("\r\n\r\n");
save_sd_detect = SD_Detect(); //初始化SD卡插入状态
SysTick_Delay_ms(500);
TIM_Cmd(TIM1, DISABLE);
TIM_CtrlPWMOutputs(TIM1, DISABLE);
while (1)
{
if(read_sd_detect_flag){
if (save_sd_detect != SD_Detect()){
/* 蜂鸣器响 */
TIM_Cmd(TIM1, ENABLE);
TIM_CtrlPWMOutputs(TIM1, ENABLE);
sd_detect_change = 1; //SD卡插入状态有变
buzzer_delay = 0;
if (SD_Detect() != SD_NOT_PRESENT){
if(SD_Init() == SD_OK) {
printf ("\r\n发现SD卡!\r\n");
}
else {
printf("\r\n没有发现 SD 卡设备! \r\n");
}
printf("\r\n\r\n");
}
}
save_sd_detect = SD_Detect();
read_sd_detect_flag = 0;
}
Time_Show();
Test_Pcie_Gpio();
Touch_Key_Proc();
if (read_lis3dh_flag){
Collect_Data(ACCdata);
for (i=0; i<3; i++){
if (oldACCdata[i] < ACCdata[i]){
ACCdiff[i] = ACCdata[i] - oldACCdata[i];
}
else{
ACCdiff[i] = oldACCdata[i] - ACCdata[i];
}
}
RGB_Control(ACCdiff[0]<<1, ACCdiff[1]<<1, ACCdiff[2]<<1);
for (i=0; i<3; i++){
oldACCdata[i] = ACCdata[i];
}
read_lis3dh_flag = 0;
}
if (one_second_flag){
printf("X=%d, Y=%d, Z=%d\r\n\r\n", ACCdata[1], ACCdata[0], ACCdata[2]);
Adc_Proc();
one_second_flag = 0;
}
}
}
int main(void) {
char * s = "abcdefghijklmnopqrstuvwxyz";
char * s2 = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
char * s3 = "~!@#$%^&*()_+-=1234567890";
char adc_str[30];
unsigned int adc_data;
unsigned int last_adc = 0;
unsigned int dcolor = 0;
unsigned int adc_avg = 0;
int i = 0;
GraphicsInit();
drawScreen( BLACK );
drawBox( 30, 30, 80, 80, BLUE );
drawCircle( 100, 100, 10, YELLOW );
drawTriangle( 20, 150, 10, 290, 200, 200, ORANGE );
drawString( 0, 0, s, GREEN );
drawString( 0, 8, s2, YELLOW );
drawString( 0, 16, s3, RED );
Touch_Init();
//read adc5
// Power-up GPIO
LPC_SC->PCONP |= ( 1 << 12 );
//clk is at cclk/8 = 15MHz
LPC_SC->PCLKSEL0 |= (1 << 25);
LPC_SC->PCLKSEL0 |= (1 << 24);
//ADC mode
LPC_PINCON->PINSEL3 |= ( 1 << 31 );
LPC_PINCON->PINSEL3 |= ( 1 << 30 );
// 10 no pul up or pull down
LPC_PINCON->PINMODE3 |= ( 1 << 31 );
LPC_PINCON->PINMODE3 |= ( 0 << 30 );
while(1){
// start adc conversion
adc_avg = 0;
/*for( i = 0; i < 10; i++){
LPC_ADC->ADCR = ADC_START | ADC_WORK | ADC_AD5;
//wait for it to finish
while( (LPC_ADC->ADGDR & ADC_DONE) == 0 );
//stop conversion
LPC_ADC->ADCR = ~(ADC_START | ADC_WORK | ADC_AD5);
//get result
adc_data = (LPC_ADC->ADDR5 >> 4) & 0x0FFF;
adc_avg += adc_data;
}*/
//adc_data = adc_avg / 10;
adc_data = 2045;
if( (adc_data > last_adc + 20) || (adc_data < last_adc - 20) ){
last_adc = adc_data;
if( adc_data < 500 ){
dcolor = BLACK;
}else if( adc_data > 500 && adc_data < 1000 ){
dcolor = GREY;
}else if( adc_data > 100 && adc_data < 1500 ){
dcolor = BLUE;
}else if( adc_data > 1500 && adc_data < 2000 ){
dcolor = CYAN;
}else if( adc_data > 2000 && adc_data < 2500 ){
dcolor = GREEN;
}else if( adc_data > 2500 && adc_data < 3000 ){
dcolor = YELLOW;
}else if( adc_data > 3000 && adc_data < 3500 ){
dcolor = BROWN;
}else if( adc_data > 3500 && adc_data < 4000 ){
dcolor = ORANGE;
}else{
dcolor = RED;
}
drawScreen( dcolor );
itoa(adc_data, adc_str, 10);
drawString( 0, 0, adc_str, BLACK );
}
}
return 0 ;
}
/*
*********************************************************************************************************
* Description: Main function
* Arguments : None
* Returns : None
*********************************************************************************************************
*/
int main (void)
{
u8 key;
u8 x0,y0,x1,y1,x2,y2;
u8 r,a,b;
unsigned char flag;
tccolor=Blue;
SystemInit();
UART0_Init();
LCD_Init ();
LPC_GPIO0->FIODIR |= 0x00002C0; //P0.6 0.7 0.9 Output
LPC_GPIO2->FIODIR |= 0x00000FF; //P2.13 input P2.0...P2.7 Output
Touch_Init();
LCD_Color(0,0,239,239,White);
Load_Drow_Dialog();
LCD_Color(279,0,40,40,White);
while(1)
{
if(len==8)
{
len=0;
flag=data[6];
switch(flag)
{
case 0x01:
x0=data[0];y0=data[1];x1=data[2];y1=data[3];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawLine(x0,y0,x1,y1);
break;
case 0x02:
x0=data[0];y0=data[1];x1=data[2];y1=data[3];x2=data[4];y2=data[5];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawTriangle(x0,y0,x1,y1,x2,y2);
break;
case 0x03:
x0=data[0];y0=data[1];x1=data[2];y1=data[3];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawRectangle(x0,y0,x1,y1);
break;
case 0x04:
x0=data[0];y0=data[1];r=data[2];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawCircle(x0,y0,r);
break;
case 0x05:
x0=data[0];y0=data[1];a=data[2];b=data[3];
pencolor=colorchange(data[7]);
LCD_Color(0,0,239,239,pencolor);
LCD_DrawEllipse(x0,y0,a,b);
}
}
key = KEY_Scan();
if(Pen_Point.Key_Sta==Key_Down) //Touch screen is pressed
{
Pen_Int_Set(0); //Closed interrupt
do
{
Convert_Pos();
Pen_Point.Key_Sta=Key_Up;
// Draw_Big_Point(Pen_Point.X0,Pen_Point.Y0); //Drawing
if(Pen_Point.Y0>=240)
{
Load_Drow_Dialog();
switch(Pen_Point.X0/40)
{
case 0:LCD_Color(279,0,40,40,White);tccolor=Blue;break;
case 1:LCD_Color(279,40,40,40,White);tccolor=Yellow;break;
case 2:LCD_Color(279,80,40,40,White);tccolor=Green;break;
case 3:LCD_Color(279,120,40,40,White);tccolor=Red;break;
case 4:LCD_Color(279,160,40,40,White);tccolor=Purple;break;
case 5:LCD_Color(279,200,40,40,White);tccolor=Cyan;break;
}
}
/* else
{
LCD_Color(0,0,239,239,tccolor);
}*/
}while(PEN==0); //While the Touch screen is pressing
Pen_Int_Set(1); //Opene the interrupt
}
else
delay1ms(1);
}
}
int main (void)
{
int buf[318];
int x, x2;
int y, y2;
int r;
int i;
wiringPiSetup(); //设置树莓派GPIO
SetPinNU(0,1,2,3,4,5,6,7,8,10,9,11,15,16,14,12,13); //设置引脚（参考树莓派GPIO映射图）
SetLCDSize(LCD_28); //设置使用的LCD尺寸
Touch_Init(); //初始化触摸
setFont(8,12); //设置字体为8x12
setColor(0x07e0); //设置字体颜色
setBackColor(0xf800); //设置背景颜色
printf("Init is ok!\n");
while(1)
{
clrScr();
setColorRGB(255, 0, 0);
fillRect(0, 0, 319, 13);
setColorRGB(64, 64, 64);
fillRect(0, 226, 319, 239);
setColorRGB(255, 255, 255);
setBackColorRGB(255, 0, 0);
print("* Universal Color TFT Display Library *", CENTER,1,0);
setBackColorRGB(64, 64, 64);
setColorRGB(255,255,0);
print("<http://electronics.henningkarlsen.com>", CENTER,227,0);
setColorRGB(0, 0, 255);
drawRect(0, 14,319,225);
// Draw crosshairs
setColorRGB(0, 0, 255);
setBackColorRGB(0, 0, 0);
drawLine(159, 15, 159, 224);
drawLine(1, 119, 318, 119);
for (i=9; i<310; i+=10)
drawLine(i, 117, i, 121);
for (i=19; i<220; i+=10)
drawLine(157, i, 161, i);
// Draw sin-, cos- and tan-lines
setColorRGB(0,255,255);
print("Sin", 5, 15,0);
for (i=1; i<318; i++)
{
drawPixel(i,119+(sin(((i*1.13)*3.14)/180)*95));
}
setColorRGB(255,0,0);
print("Cos", 5, 27,0);
for (i=1; i<318; i++)
{
drawPixel(i,119+(cos(((i*1.13)*3.14)/180)*95));
}
setColorRGB(255,255,0);
print("Tan", 5, 39,0);
for (i=1; i<318; i++)
{
drawPixel(i,119+(tan(((i*1.13)*3.14)/180)));
}
delay(2000);
setColorRGB(0,0,0);
fillRect(1,15,318,224);
setColorRGB(0, 0, 255);
setBackColorRGB(0, 0, 0);
drawLine(159, 15, 159, 224);
drawLine(1, 119, 318, 119);
// Draw a moving sinewave
x=1;
for (i=1; i<(318*20); i++)
{
x++;
if (x==319)
x=1;
if (i>319)
{
if ((x==159)||(buf[x-1]==119))
setColorRGB(0,0,255);
else
setColorRGB(0,0,0);
drawPixel(x,buf[x-1]);
}
setColorRGB(0,255,255);
y=119+(sin(((i*1.1)*3.14)/180)*(90-(i / 100)));
drawPixel(x,y);
buf[x-1]=y;
}
delay(2000);
setColorRGB(0,0,0);
fillRect(1,15,318,224);
// Draw some filled rectangles
for (i=1; i<6; i++)
{
switch (i)
{
case 1:
setColorRGB(255,0,255);
break;
case 2:
setColorRGB(255,0,0);
break;
case 3:
setColorRGB(0,255,0);
break;
case 4:
setColorRGB(0,0,255);
break;
case 5:
setColorRGB(255,255,0);
break;
}
fillRect(70+(i*20), 30+(i*20), 130+(i*20), 90+(i*20));
}
delay(2000);
setColorRGB(0,0,0);
fillRect(1,15,318,224);
// Draw some filled, rounded rectangles
for (i=1; i<6; i++)
{
switch (i)
{
case 1:
setColorRGB(255,0,255);
break;
case 2:
setColorRGB(255,0,0);
break;
case 3:
setColorRGB(0,255,0);
break;
case 4:
setColorRGB(0,0,255);
break;
case 5:
setColorRGB(255,255,0);
break;
}
fillRoundRect(190-(i*20), 30+(i*20), 250-(i*20), 90+(i*20));
}
delay(2000);
setColorRGB(0,0,0);
fillRect(1,15,318,224);
// Draw some filled circles
for (i=1; i<6; i++)
{
switch (i)
{
case 1:
setColorRGB(255,0,255);
break;
case 2:
setColorRGB(255,0,0);
break;
case 3:
setColorRGB(0,255,0);
break;
case 4:
setColorRGB(0,0,255);
break;
case 5:
setColorRGB(255,255,0);
break;
}
fillCircle(100+(i*20),60+(i*20), 30);
}
delay(2000);
setColorRGB(0,0,0);
fillRect(1,15,318,224);
// Draw some lines in a pattern
setColorRGB(255,0,0);
for (i=15; i<224; i+=5)
{
drawLine(1, i, (i*1.44)-10, 224);
}
setColorRGB(255,0,0);
for (i=224; i>15; i-=5)
{
drawLine(318, i, (i*1.44)-11, 15);
}
setColorRGB(0,255,255);
for (i=224; i>15; i-=5)
{
drawLine(1, i, 331-(i*1.44), 15);
}
setColorRGB(0,255,255);
for (i=15; i<224; i+=5)
{
drawLine(318, i, 330-(i*1.44), 224);
}
delay(2000);
setColorRGB(0,0,0);
fillRect(1,15,318,224);
// Draw some random circle
fillScrRGB(0, 0, 255);
setColorRGB(255, 0, 0);
fillRoundRect(80, 70, 239, 169);
setColorRGB(255, 255, 255);
setBackColorRGB(255, 0, 0);
print("That's it!", CENTER, 93,0);
print("Restarting in a", CENTER, 119,0);
print("few seconds...", CENTER, 142,0);
setColorRGB(0, 255, 0);
setBackColorRGB(0, 0, 255);
print("Runtime: (msecs)", CENTER, 210,0);
printNumI(millis(), CENTER, 225,0,0);
delay (2000);
if(Touch_DataAvailable())
{
Touch_Read();
x=Touch_GetX();
y=Touch_GetY();
printf("%d,%d\n",x,y);
}
}
}
