/*
** ===================================================================
** Method : InterruptRx (component Serial_LDD)
**
** Description :
** The method services the receive interrupt of the selected
** peripheral(s) and eventually invokes the bean's event(s).
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
static void InterruptRx(ASerialLdd3_TDeviceDataPtr DeviceDataPrv)
{
register uint16_t Data; /* Temporary variable for data */
Data = (uint16_t)UART_PDD_GetChar8(UART1_BASE_PTR); /* Read an 8-bit character from the receiver */
if (DeviceDataPrv->InpDataNumReq != 0x00U) { /* Is the receive block operation pending? */
*(DeviceDataPrv->InpDataPtr++) = (uint8_t)Data; /* Put an 8-bit character to the receive buffer */
DeviceDataPrv->InpRecvDataNum++; /* Increment received char. counter */
if (DeviceDataPrv->InpRecvDataNum == DeviceDataPrv->InpDataNumReq) { /* Is the requested number of characters received? */
DeviceDataPrv->InpDataNumReq = 0x00U; /* If yes then clear number of requested characters to be received. */
ASerialLdd3_OnBlockReceived(DeviceDataPrv->UserDataPtr);
}
}
}
/* ===================================================================*/
void IO1_Main(LDD_TDeviceData *DeviceDataPtr)
{
IO1_TDeviceDataPtr DeviceDataPrv = (IO1_TDeviceDataPtr)DeviceDataPtr;
register uint32_t StatReg = UART_PDD_ReadInterruptStatusReg(UART1_BASE_PTR); /* Read status register */
if (StatReg & (UART_S1_NF_MASK | UART_S1_OR_MASK | UART_S1_FE_MASK | UART_S1_PF_MASK)) { /* Is any error flag set? */
(void)UART_PDD_GetChar8(UART1_BASE_PTR); /* Dummy read 8-bit character from receiver */
StatReg &= (uint32_t)(~(uint32_t)UART_S1_RDRF_MASK); /* Clear the receive data flag to discard the errorneous data */
}
if (StatReg & UART_S1_RDRF_MASK) { /* Is the receiver's interrupt flag set? */
InterruptRx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
if (DeviceDataPrv->SerFlag & ENABLED_TX_INT) { /* Is the transmitter interrupt enabled? */
if (StatReg & UART_S1_TDRE_MASK) { /* Is the transmitter empty? */
InterruptTx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
}
}
/*
** ===================================================================
** Method : MB_UART_Interrupt (component Serial_LDD)
**
** Description :
** The ISR function handling the device receive/transmit
** interrupt. Calls InterruptTX/InterruptRX methods.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void MB_UART_Interrupt(LDD_RTOS_TISRParameter _isrParameter)
{
/* {MQXLite RTOS Adapter} ISR parameter is passed as parameter from RTOS interrupt dispatcher */
MB_UART_TDeviceDataPtr DeviceDataPrv = (MB_UART_TDeviceDataPtr)_isrParameter;
register uint32_t StatReg = UART_PDD_ReadInterruptStatusReg(UART2_BASE_PTR); /* Read status register */
if (StatReg & (UART_S1_NF_MASK | UART_S1_OR_MASK | UART_S1_FE_MASK | UART_S1_PF_MASK)) { /* Is any error flag set? */
(void)UART_PDD_GetChar8(UART2_BASE_PTR); /* Dummy read 8-bit character from receiver */
StatReg &= (uint32_t)(~(uint32_t)UART_S1_RDRF_MASK); /* Clear the receive data flag to discard the errorneous data */
}
if (StatReg & UART_S1_RDRF_MASK) { /* Is the receiver's interrupt flag set? */
InterruptRx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
if (DeviceDataPrv->SerFlag & ENABLED_TX_INT) { /* Is the transmitter interrupt enabled? */
if (StatReg & UART_S1_TDRE_MASK) { /* Is the transmitter empty? */
InterruptTx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
}
}
/* ===================================================================*/
void ASerialLdd2_Main(LDD_TDeviceData *DeviceDataPtr)
{
ASerialLdd2_TDeviceDataPtr DeviceDataPrv = (ASerialLdd2_TDeviceDataPtr)DeviceDataPtr;
register uint32_t StatReg = UART_PDD_ReadInterruptStatusReg(UART0_BASE_PTR); /* Read status register */
register uint16_t OnErrorFlags = 0U; /* Temporary variable for flags */
register uint8_t OnBreakFlag = 0U; /* Temporary variable flag for OnBreak event */
register uint16_t Data; /* Temporary variable for data */
if (StatReg & (UART_S1_NF_MASK | UART_S1_OR_MASK | UART_S1_FE_MASK | UART_S1_PF_MASK)) { /* Is any error flag set? */
Data = (uint16_t)UART_PDD_GetChar8(UART0_BASE_PTR); /* Read an 8-bit character from receiver */
if ((StatReg & UART_S1_FE_MASK) != 0U) { /* Is the framing error detected? */
if (((StatReg & UART_S1_RDRF_MASK) != 0U) && (Data == 0U)) { /* Is the zero character in the receiver? */
OnBreakFlag++;
DeviceDataPrv->SerFlag |= BREAK_DETECTED; /* If yes then set the flag */
} else {
OnErrorFlags |= LDD_SERIAL_FRAMING_ERROR; /* If yes then set the flag */
}
}
if ((StatReg & UART_S1_OR_MASK) != 0U) { /* Is the overrun error flag set? */
OnErrorFlags |= LDD_SERIAL_RX_OVERRUN; /* If yes then set the flag */
}
if ((StatReg & UART_S1_PF_MASK) != 0U) { /* Is the parity error flag set? */
OnErrorFlags |= LDD_SERIAL_PARITY_ERROR; /* If yes then set the flag */
}
if ((StatReg & UART_S1_NF_MASK) != 0U) { /* Is the noise error flag set? */
OnErrorFlags |= LDD_SERIAL_NOISE_ERROR; /* If yes then set the flag */
}
DeviceDataPrv->ErrFlag |= OnErrorFlags; /* Copy flags status to ErrFlag status variable */
StatReg &= (uint32_t)(~(uint32_t)UART_S1_RDRF_MASK); /* Clear the receive data flag to discard the errorneous data */
if (OnBreakFlag != 0U) {
ASerialLdd2_OnBreak(DeviceDataPrv->UserDataPtr); /* If yes then invoke user event */
}
}
if (StatReg & UART_S1_RDRF_MASK) { /* Is the receiver's interrupt flag set? */
InterruptRx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
if (DeviceDataPrv->SerFlag & ENABLED_TX_INT) { /* Is the transmitter interrupt enabled? */
if (StatReg & UART_S1_TDRE_MASK) { /* Is the transmitter empty? */
InterruptTx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
}
}
/*
** ===================================================================
** Method : UART_A_Interrupt (component Serial_LDD)
**
** Description :
** The ISR function handling the device receive/transmit
** interrupt. Calls InterruptTX/InterruptRX methods.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void UART_A_Interrupt(LDD_RTOS_TISRParameter _isrParameter)
{
/* {MQXLite RTOS Adapter} ISR parameter is passed as parameter from RTOS interrupt dispatcher */
UART_A_TDeviceDataPtr DeviceDataPrv = (UART_A_TDeviceDataPtr)_isrParameter;
register uint32_t StatReg = UART_PDD_ReadInterruptStatusReg(UART3_BASE_PTR); /* Read status register */
if (StatReg & (UART_S1_NF_MASK | UART_S1_OR_MASK | UART_S1_FE_MASK | UART_S1_PF_MASK)) { /* Is any error flag set? */
(void)UART_PDD_GetChar8(UART3_BASE_PTR); /* Dummy read 8-bit character from receiver */
StatReg &= (uint32_t)(~(uint32_t)UART_S1_RDRF_MASK); /* Clear the receive data flag to discard the errorneous data */
}
if (StatReg & UART_S1_RDRF_MASK) { /* Is the receiver's interrupt flag set? */
InterruptRx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
if (DeviceDataPrv->SerFlag & ENABLED_TX_INT) { /* Is the transmitter interrupt enabled? */
if (StatReg & UART_S1_TDRE_MASK) { /* Is the transmitter empty? */
InterruptTx(DeviceDataPrv); /* If yes, then invoke the internal service routine. This routine is inlined. */
}
}
if ((UART_PDD_GetTxCompleteInterruptMask(UART3_BASE_PTR) != 0U) && (StatReg & UART_S1_TC_MASK)) { /* Is a transmission completed? */
UART_PDD_DisableInterrupt(UART3_BASE_PTR, UART_PDD_INTERRUPT_TRANSMITTER_COMPLETE); /* If yes then disable TX complete interrupt */
UART_A_OnTxComplete(DeviceDataPrv->UserDataPtr); /* If yes then invoke user event */
}
}
