Boolean
Main_SetObjdir(const char *path)
{
struct stat sb;
char *p = NULL;
char buf[MAXPATHLEN + 1];
Boolean rc = FALSE;
/* expand variable substitutions */
if (strchr(path, '$') != 0) {
snprintf(buf, MAXPATHLEN, "%s", path);
path = p = Var_Subst(NULL, buf, VAR_GLOBAL, 0);
}
if (path[0] != '/') {
snprintf(buf, MAXPATHLEN, "%s/%s", curdir, path);
path = buf;
}
/* look for the directory and try to chdir there */
if (stat(path, &sb) == 0 && S_ISDIR(sb.st_mode)) {
if (chdir(path)) {
(void)fprintf(stderr, "make warning: %s: %s.\n",
path, strerror(errno));
} else {
strncpy(objdir, path, MAXPATHLEN);
Var_Set(".OBJDIR", objdir, VAR_GLOBAL, 0);
setenv("PWD", objdir, 1);
Dir_InitDot();
rc = TRUE;
}
}
if (p)
free(p);
return rc;
}
/*-
* main --
* The main function, for obvious reasons. Initializes variables
* and a few modules, then parses the arguments give it in the
* environment and on the command line. Reads the system makefile
* followed by either Makefile, makefile or the file given by the
* -f argument. Sets the .MAKEFLAGS PMake variable based on all the
* flags it has received by then uses either the Make or the Compat
* module to create the initial list of targets.
*
* Results:
* If -q was given, exits -1 if anything was out-of-date. Else it exits
* 0.
*
* Side Effects:
* The program exits when done. Targets are created. etc. etc. etc.
*/
int
main(int argc, char **argv)
{
Lst targs; /* target nodes to create -- passed to Make_Init */
Boolean outOfDate = FALSE; /* FALSE if all targets up to date */
struct stat sb, sa;
char *p1, *path;
char mdpath[MAXPATHLEN];
#ifdef FORCE_MACHINE
const char *machine = FORCE_MACHINE;
#else
const char *machine = getenv("MACHINE");
#endif
const char *machine_arch = getenv("MACHINE_ARCH");
char *syspath = getenv("MAKESYSPATH");
Lst sysMkPath; /* Path of sys.mk */
char *cp = NULL, *start;
/* avoid faults on read-only strings */
static char defsyspath[] = _PATH_DEFSYSPATH;
char found_path[MAXPATHLEN + 1]; /* for searching for sys.mk */
struct timeval rightnow; /* to initialize random seed */
struct utsname utsname;
/* default to writing debug to stderr */
debug_file = stderr;
#ifdef SIGINFO
(void)bmake_signal(SIGINFO, siginfo);
#endif
/*
* Set the seed to produce a different random sequence
* on each program execution.
*/
gettimeofday(&rightnow, NULL);
srandom(rightnow.tv_sec + rightnow.tv_usec);
if ((progname = strrchr(argv[0], '/')) != NULL)
progname++;
else
progname = argv[0];
#if defined(MAKE_NATIVE) || (defined(HAVE_SETRLIMIT) && defined(RLIMIT_NOFILE))
/*
* get rid of resource limit on file descriptors
*/
{
struct rlimit rl;
if (getrlimit(RLIMIT_NOFILE, &rl) != -1 &&
rl.rlim_cur != rl.rlim_max) {
rl.rlim_cur = rl.rlim_max;
(void)setrlimit(RLIMIT_NOFILE, &rl);
}
}
#endif
if (uname(&utsname) == -1) {
(void)fprintf(stderr, "%s: uname failed (%s).\n", progname,
strerror(errno));
exit(2);
}
/*
* Get the name of this type of MACHINE from utsname
* so we can share an executable for similar machines.
* (i.e. m68k: amiga hp300, mac68k, sun3, ...)
*
* Note that both MACHINE and MACHINE_ARCH are decided at
* run-time.
*/
if (!machine) {
#ifdef MAKE_NATIVE
machine = utsname.machine;
#else
#ifdef MAKE_MACHINE
machine = MAKE_MACHINE;
#else
machine = "unknown";
#endif
#endif
}
if (!machine_arch) {
#if defined(MAKE_NATIVE) && defined(HAVE_SYSCTL) && defined(CTL_HW) && defined(HW_MACHINE_ARCH)
static char machine_arch_buf[sizeof(utsname.machine)];
int mib[2] = { CTL_HW, HW_MACHINE_ARCH };
size_t len = sizeof(machine_arch_buf);
if (sysctl(mib, __arraycount(mib), machine_arch_buf,
&len, NULL, 0) < 0) {
(void)fprintf(stderr, "%s: sysctl failed (%s).\n", progname,
strerror(errno));
exit(2);
}
machine_arch = machine_arch_buf;
#else
#ifndef MACHINE_ARCH
#ifdef MAKE_MACHINE_ARCH
machine_arch = MAKE_MACHINE_ARCH;
#else
machine_arch = "unknown";
#endif
#else
machine_arch = MACHINE_ARCH;
#endif
#endif
}
myPid = getpid(); /* remember this for vFork() */
/*
* Just in case MAKEOBJDIR wants us to do something tricky.
*/
Var_Init(); /* Initialize the lists of variables for
* parsing arguments */
Var_Set(".MAKE.OS", utsname.sysname, VAR_GLOBAL, 0);
Var_Set("MACHINE", machine, VAR_GLOBAL, 0);
Var_Set("MACHINE_ARCH", machine_arch, VAR_GLOBAL, 0);
#ifdef MAKE_VERSION
Var_Set("MAKE_VERSION", MAKE_VERSION, VAR_GLOBAL, 0);
#endif
Var_Set(".newline", "\n", VAR_GLOBAL, 0); /* handy for :@ loops */
/*
* This is the traditional preference for makefiles.
*/
#ifndef MAKEFILE_PREFERENCE_LIST
# define MAKEFILE_PREFERENCE_LIST "makefile Makefile"
#endif
Var_Set(MAKEFILE_PREFERENCE, MAKEFILE_PREFERENCE_LIST,
VAR_GLOBAL, 0);
Var_Set(MAKE_DEPENDFILE, ".depend", VAR_GLOBAL, 0);
create = Lst_Init(FALSE);
makefiles = Lst_Init(FALSE);
printVars = FALSE;
debugVflag = FALSE;
variables = Lst_Init(FALSE);
beSilent = FALSE; /* Print commands as executed */
ignoreErrors = FALSE; /* Pay attention to non-zero returns */
noExecute = FALSE; /* Execute all commands */
noRecursiveExecute = FALSE; /* Execute all .MAKE targets */
keepgoing = FALSE; /* Stop on error */
allPrecious = FALSE; /* Remove targets when interrupted */
queryFlag = FALSE; /* This is not just a check-run */
noBuiltins = FALSE; /* Read the built-in rules */
touchFlag = FALSE; /* Actually update targets */
debug = 0; /* No debug verbosity, please. */
jobsRunning = FALSE;
maxJobs = DEFMAXLOCAL; /* Set default local max concurrency */
maxJobTokens = maxJobs;
compatMake = FALSE; /* No compat mode */
ignorePWD = FALSE;
/*
* Initialize the parsing, directory and variable modules to prepare
* for the reading of inclusion paths and variable settings on the
* command line
*/
/*
* Initialize various variables.
* MAKE also gets this name, for compatibility
* .MAKEFLAGS gets set to the empty string just in case.
* MFLAGS also gets initialized empty, for compatibility.
*/
Parse_Init();
if (argv[0][0] == '/' || strchr(argv[0], '/') == NULL) {
/*
* Leave alone if it is an absolute path, or if it does
* not contain a '/' in which case we need to find it in
* the path, like execvp(3) and the shells do.
*/
p1 = argv[0];
} else {
/*
* A relative path, canonicalize it.
*/
p1 = cached_realpath(argv[0], mdpath);
if (!p1 || *p1 != '/' || stat(p1, &sb) < 0) {
p1 = argv[0]; /* realpath failed */
}
}
Var_Set("MAKE", p1, VAR_GLOBAL, 0);
Var_Set(".MAKE", p1, VAR_GLOBAL, 0);
Var_Set(MAKEFLAGS, "", VAR_GLOBAL, 0);
Var_Set(MAKEOVERRIDES, "", VAR_GLOBAL, 0);
Var_Set("MFLAGS", "", VAR_GLOBAL, 0);
Var_Set(".ALLTARGETS", "", VAR_GLOBAL, 0);
/* some makefiles need to know this */
Var_Set(MAKE_LEVEL ".ENV", MAKE_LEVEL_ENV, VAR_CMD, 0);
/*
* Set some other useful macros
*/
{
char tmp[64], *ep;
makelevel = ((ep = getenv(MAKE_LEVEL_ENV)) && *ep) ? atoi(ep) : 0;
if (makelevel < 0)
makelevel = 0;
snprintf(tmp, sizeof(tmp), "%d", makelevel);
Var_Set(MAKE_LEVEL, tmp, VAR_GLOBAL, 0);
snprintf(tmp, sizeof(tmp), "%u", myPid);
Var_Set(".MAKE.PID", tmp, VAR_GLOBAL, 0);
snprintf(tmp, sizeof(tmp), "%u", getppid());
Var_Set(".MAKE.PPID", tmp, VAR_GLOBAL, 0);
}
if (makelevel > 0) {
char pn[1024];
snprintf(pn, sizeof(pn), "%s[%d]", progname, makelevel);
progname = bmake_strdup(pn);
}
#ifdef USE_META
meta_init();
#endif
/*
* First snag any flags out of the MAKE environment variable.
* (Note this is *not* MAKEFLAGS since /bin/make uses that and it's
* in a different format).
*/
#ifdef POSIX
p1 = explode(getenv("MAKEFLAGS"));
Main_ParseArgLine(p1);
free(p1);
#else
Main_ParseArgLine(getenv("MAKE"));
#endif
/*
* Find where we are (now).
* We take care of PWD for the automounter below...
*/
if (getcwd(curdir, MAXPATHLEN) == NULL) {
(void)fprintf(stderr, "%s: getcwd: %s.\n",
progname, strerror(errno));
exit(2);
}
MainParseArgs(argc, argv);
if (enterFlag)
printf("%s: Entering directory `%s'\n", progname, curdir);
/*
* Verify that cwd is sane.
*/
if (stat(curdir, &sa) == -1) {
(void)fprintf(stderr, "%s: %s: %s.\n",
progname, curdir, strerror(errno));
exit(2);
}
/*
* All this code is so that we know where we are when we start up
* on a different machine with pmake.
* Overriding getcwd() with $PWD totally breaks MAKEOBJDIRPREFIX
* since the value of curdir can vary depending on how we got
* here. Ie sitting at a shell prompt (shell that provides $PWD)
* or via subdir.mk in which case its likely a shell which does
* not provide it.
* So, to stop it breaking this case only, we ignore PWD if
* MAKEOBJDIRPREFIX is set or MAKEOBJDIR contains a transform.
*/
#ifndef NO_PWD_OVERRIDE
if (!ignorePWD) {
char *pwd, *ptmp1 = NULL, *ptmp2 = NULL;
if ((pwd = getenv("PWD")) != NULL &&
Var_Value("MAKEOBJDIRPREFIX", VAR_CMD, &ptmp1) == NULL) {
const char *makeobjdir = Var_Value("MAKEOBJDIR",
VAR_CMD, &ptmp2);
if (makeobjdir == NULL || !strchr(makeobjdir, '$')) {
if (stat(pwd, &sb) == 0 &&
sa.st_ino == sb.st_ino &&
sa.st_dev == sb.st_dev)
(void)strncpy(curdir, pwd, MAXPATHLEN);
}
}
free(ptmp1);
free(ptmp2);
}
#endif
Var_Set(".CURDIR", curdir, VAR_GLOBAL, 0);
/*
* Find the .OBJDIR. If MAKEOBJDIRPREFIX, or failing that,
* MAKEOBJDIR is set in the environment, try only that value
* and fall back to .CURDIR if it does not exist.
*
* Otherwise, try _PATH_OBJDIR.MACHINE, _PATH_OBJDIR, and
* finally _PATH_OBJDIRPREFIX`pwd`, in that order. If none
* of these paths exist, just use .CURDIR.
*/
Dir_Init(curdir);
(void)Main_SetObjdir(curdir);
if ((path = Var_Value("MAKEOBJDIRPREFIX", VAR_CMD, &p1)) != NULL) {
(void)snprintf(mdpath, MAXPATHLEN, "%s%s", path, curdir);
(void)Main_SetObjdir(mdpath);
free(p1);
} else if ((path = Var_Value("MAKEOBJDIR", VAR_CMD, &p1)) != NULL) {
(void)Main_SetObjdir(path);
free(p1);
} else {
(void)snprintf(mdpath, MAXPATHLEN, "%s.%s", _PATH_OBJDIR, machine);
if (!Main_SetObjdir(mdpath) && !Main_SetObjdir(_PATH_OBJDIR)) {
(void)snprintf(mdpath, MAXPATHLEN, "%s%s",
_PATH_OBJDIRPREFIX, curdir);
(void)Main_SetObjdir(mdpath);
}
}
/*
* Initialize archive, target and suffix modules in preparation for
* parsing the makefile(s)
*/
Arch_Init();
Targ_Init();
Suff_Init();
Trace_Init(tracefile);
DEFAULT = NULL;
(void)time(&now);
Trace_Log(MAKESTART, NULL);
/*
* Set up the .TARGETS variable to contain the list of targets to be
* created. If none specified, make the variable empty -- the parser
* will fill the thing in with the default or .MAIN target.
*/
if (!Lst_IsEmpty(create)) {
LstNode ln;
for (ln = Lst_First(create); ln != NULL;
ln = Lst_Succ(ln)) {
char *name = (char *)Lst_Datum(ln);
Var_Append(".TARGETS", name, VAR_GLOBAL);
}
} else
Var_Set(".TARGETS", "", VAR_GLOBAL, 0);
/*
* If no user-supplied system path was given (through the -m option)
* add the directories from the DEFSYSPATH (more than one may be given
* as dir1:...:dirn) to the system include path.
*/
if (syspath == NULL || *syspath == '\0')
syspath = defsyspath;
else
syspath = bmake_strdup(syspath);
for (start = syspath; *start != '\0'; start = cp) {
for (cp = start; *cp != '\0' && *cp != ':'; cp++)
continue;
if (*cp == ':') {
*cp++ = '\0';
}
/* look for magic parent directory search string */
if (strncmp(".../", start, 4) != 0) {
(void)Dir_AddDir(defIncPath, start);
} else {
if (Dir_FindHereOrAbove(curdir, start+4,
found_path, sizeof(found_path))) {
(void)Dir_AddDir(defIncPath, found_path);
}
}
}
if (syspath != defsyspath)
free(syspath);
/*
* Read in the built-in rules first, followed by the specified
* makefile, if it was (makefile != NULL), or the default
* makefile and Makefile, in that order, if it wasn't.
*/
if (!noBuiltins) {
LstNode ln;
sysMkPath = Lst_Init(FALSE);
Dir_Expand(_PATH_DEFSYSMK,
Lst_IsEmpty(sysIncPath) ? defIncPath : sysIncPath,
sysMkPath);
if (Lst_IsEmpty(sysMkPath))
Fatal("%s: no system rules (%s).", progname,
_PATH_DEFSYSMK);
ln = Lst_Find(sysMkPath, NULL, ReadMakefile);
if (ln == NULL)
Fatal("%s: cannot open %s.", progname,
(char *)Lst_Datum(ln));
}
if (!Lst_IsEmpty(makefiles)) {
LstNode ln;
ln = Lst_Find(makefiles, NULL, ReadAllMakefiles);
if (ln != NULL)
Fatal("%s: cannot open %s.", progname,
(char *)Lst_Datum(ln));
} else {
p1 = Var_Subst(NULL, "${" MAKEFILE_PREFERENCE "}",
VAR_CMD, VARF_WANTRES);
if (p1) {
(void)str2Lst_Append(makefiles, p1, NULL);
(void)Lst_Find(makefiles, NULL, ReadMakefile);
free(p1);
}
}
/* In particular suppress .depend for '-r -V .OBJDIR -f /dev/null' */
if (!noBuiltins || !printVars) {
makeDependfile = Var_Subst(NULL, "${.MAKE.DEPENDFILE:T}",
VAR_CMD, VARF_WANTRES);
doing_depend = TRUE;
(void)ReadMakefile(makeDependfile, NULL);
doing_depend = FALSE;
}
if (enterFlagObj)
printf("%s: Entering directory `%s'\n", progname, objdir);
MakeMode(NULL);
Var_Append("MFLAGS", Var_Value(MAKEFLAGS, VAR_GLOBAL, &p1), VAR_GLOBAL);
free(p1);
if (!forceJobs && !compatMake &&
Var_Exists(".MAKE.JOBS", VAR_GLOBAL)) {
char *value;
int n;
value = Var_Subst(NULL, "${.MAKE.JOBS}", VAR_GLOBAL, VARF_WANTRES);
n = strtol(value, NULL, 0);
if (n < 1) {
(void)fprintf(stderr, "%s: illegal value for .MAKE.JOBS -- must be positive integer!\n",
progname);
exit(1);
}
if (n != maxJobs) {
Var_Append(MAKEFLAGS, "-j", VAR_GLOBAL);
Var_Append(MAKEFLAGS, value, VAR_GLOBAL);
}
maxJobs = n;
maxJobTokens = maxJobs;
forceJobs = TRUE;
free(value);
}
/*
* Be compatible if user did not specify -j and did not explicitly
* turned compatibility on
*/
if (!compatMake && !forceJobs) {
compatMake = TRUE;
}
if (!compatMake)
Job_ServerStart(maxJobTokens, jp_0, jp_1);
if (DEBUG(JOB))
fprintf(debug_file, "job_pipe %d %d, maxjobs %d, tokens %d, compat %d\n",
jp_0, jp_1, maxJobs, maxJobTokens, compatMake);
Main_ExportMAKEFLAGS(TRUE); /* initial export */
/*
* For compatibility, look at the directories in the VPATH variable
* and add them to the search path, if the variable is defined. The
* variable's value is in the same format as the PATH envariable, i.e.
* <directory>:<directory>:<directory>...
*/
if (Var_Exists("VPATH", VAR_CMD)) {
char *vpath, savec;
/*
* GCC stores string constants in read-only memory, but
* Var_Subst will want to write this thing, so store it
* in an array
*/
static char VPATH[] = "${VPATH}";
vpath = Var_Subst(NULL, VPATH, VAR_CMD, VARF_WANTRES);
path = vpath;
do {
/* skip to end of directory */
for (cp = path; *cp != ':' && *cp != '\0'; cp++)
continue;
/* Save terminator character so know when to stop */
savec = *cp;
*cp = '\0';
/* Add directory to search path */
(void)Dir_AddDir(dirSearchPath, path);
*cp = savec;
path = cp + 1;
} while (savec == ':');
free(vpath);
}
/*
* Now that all search paths have been read for suffixes et al, it's
* time to add the default search path to their lists...
*/
Suff_DoPaths();
/*
* Propagate attributes through :: dependency lists.
*/
Targ_Propagate();
/* print the initial graph, if the user requested it */
if (DEBUG(GRAPH1))
Targ_PrintGraph(1);
/* print the values of any variables requested by the user */
if (printVars) {
LstNode ln;
Boolean expandVars;
if (debugVflag)
expandVars = FALSE;
else
expandVars = getBoolean(".MAKE.EXPAND_VARIABLES", FALSE);
for (ln = Lst_First(variables); ln != NULL;
ln = Lst_Succ(ln)) {
char *var = (char *)Lst_Datum(ln);
char *value;
if (strchr(var, '$')) {
value = p1 = Var_Subst(NULL, var, VAR_GLOBAL,
VARF_WANTRES);
} else if (expandVars) {
char tmp[128];
if (snprintf(tmp, sizeof(tmp), "${%s}", var) >= (int)(sizeof(tmp)))
Fatal("%s: variable name too big: %s",
progname, var);
value = p1 = Var_Subst(NULL, tmp, VAR_GLOBAL,
VARF_WANTRES);
} else {
value = Var_Value(var, VAR_GLOBAL, &p1);
}
printf("%s\n", value ? value : "");
free(p1);
}
} else {
/*
* Have now read the entire graph and need to make a list of
* targets to create. If none was given on the command line,
* we consult the parsing module to find the main target(s)
* to create.
*/
if (Lst_IsEmpty(create))
targs = Parse_MainName();
else
targs = Targ_FindList(create, TARG_CREATE);
if (!compatMake) {
/*
* Initialize job module before traversing the graph
* now that any .BEGIN and .END targets have been read.
* This is done only if the -q flag wasn't given
* (to prevent the .BEGIN from being executed should
* it exist).
*/
if (!queryFlag) {
Job_Init();
jobsRunning = TRUE;
}
/* Traverse the graph, checking on all the targets */
outOfDate = Make_Run(targs);
} else {
/*
* Compat_Init will take care of creating all the
* targets as well as initializing the module.
*/
Compat_Run(targs);
}
}
#ifdef CLEANUP
Lst_Destroy(targs, NULL);
Lst_Destroy(variables, NULL);
Lst_Destroy(makefiles, NULL);
Lst_Destroy(create, (FreeProc *)free);
#endif
/* print the graph now it's been processed if the user requested it */
if (DEBUG(GRAPH2))
Targ_PrintGraph(2);
Trace_Log(MAKEEND, 0);
if (enterFlagObj)
printf("%s: Leaving directory `%s'\n", progname, objdir);
if (enterFlag)
printf("%s: Leaving directory `%s'\n", progname, curdir);
#ifdef USE_META
meta_finish();
#endif
Suff_End();
Targ_End();
Arch_End();
Var_End();
Parse_End();
Dir_End();
Job_End();
Trace_End();
return outOfDate ? 1 : 0;
}
Boolean
meta_oodate(GNode *gn, Boolean oodate)
{
static char *tmpdir = NULL;
static char cwd[MAXPATHLEN];
char ldir_vname[64];
char latestdir[MAXPATHLEN];
char fname[MAXPATHLEN];
char fname1[MAXPATHLEN];
char fname2[MAXPATHLEN];
char *p;
char *cp;
static size_t cwdlen = 0;
static size_t tmplen = 0;
FILE *fp;
Boolean ignoreOODATE = FALSE;
Lst missingFiles;
if (oodate)
return oodate; /* we're done */
missingFiles = Lst_Init(FALSE);
/*
* We need to check if the target is out-of-date. This includes
* checking if the expanded command has changed. This in turn
* requires that all variables are set in the same way that they
* would be if the target needs to be re-built.
*/
Make_DoAllVar(gn);
meta_name(gn, fname, sizeof(fname), NULL, NULL);
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "meta_oodate: %s\n", fname);
#endif
if ((fp = fopen(fname, "r")) != NULL) {
static char *buf = NULL;
static size_t bufsz;
int lineno = 0;
int lastpid = 0;
int pid;
int f = 0;
int x;
LstNode ln;
struct stat fs;
if (!buf) {
bufsz = 8 * BUFSIZ;
buf = bmake_malloc(bufsz);
}
if (!cwdlen) {
if (getcwd(cwd, sizeof(cwd)) == NULL)
err(1, "Could not get current working directory");
cwdlen = strlen(cwd);
}
if (!tmpdir) {
tmpdir = getTmpdir();
tmplen = strlen(tmpdir);
}
/* we want to track all the .meta we read */
Var_Append(".MAKE.META.FILES", fname, VAR_GLOBAL);
ln = Lst_First(gn->commands);
while (!oodate && (x = fgetLine(&buf, &bufsz, 0, fp)) > 0) {
lineno++;
if (buf[x - 1] == '\n')
buf[x - 1] = '\0';
else {
warnx("%s: %d: line truncated at %u", fname, lineno, x);
oodate = TRUE;
break;
}
/* Find the start of the build monitor section. */
if (!f) {
if (strncmp(buf, "-- filemon", 10) == 0) {
f = 1;
continue;
}
if (strncmp(buf, "# buildmon", 10) == 0) {
f = 1;
continue;
}
}
/* Delimit the record type. */
p = buf;
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: %s\n", fname, lineno, buf);
#endif
strsep(&p, " ");
if (f) {
/*
* We are in the 'filemon' output section.
* Each record from filemon follows the general form:
*
* <key> <pid> <data>
*
* Where:
* <key> is a single letter, denoting the syscall.
* <pid> is the process that made the syscall.
* <data> is the arguments (of interest).
*/
switch(buf[0]) {
case '#': /* comment */
case 'V': /* version */
break;
default:
/*
* We need to track pathnames per-process.
*
* Each process run by make, starts off in the 'CWD'
* recorded in the .meta file, if it chdirs ('C')
* elsewhere we need to track that - but only for
* that process. If it forks ('F'), we initialize
* the child to have the same cwd as its parent.
*
* We also need to track the 'latestdir' of
* interest. This is usually the same as cwd, but
* not if a process is reading directories.
*
* Each time we spot a different process ('pid')
* we save the current value of 'latestdir' in a
* variable qualified by 'lastpid', and
* re-initialize 'latestdir' to any pre-saved
* value for the current 'pid' and 'CWD' if none.
*/
CHECK_VALID_META(p);
pid = atoi(p);
if (pid > 0 && pid != lastpid) {
char *ldir;
char *tp;
if (lastpid > 0) {
/* We need to remember this. */
Var_Set(ldir_vname, latestdir, VAR_GLOBAL, 0);
}
snprintf(ldir_vname, sizeof(ldir_vname), LDIR_VNAME_FMT, pid);
lastpid = pid;
ldir = Var_Value(ldir_vname, VAR_GLOBAL, &tp);
if (ldir) {
strlcpy(latestdir, ldir, sizeof(latestdir));
if (tp)
free(tp);
} else
strlcpy(latestdir, cwd, sizeof(latestdir));
}
/* Skip past the pid. */
if (strsep(&p, " ") == NULL)
continue;
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: cwd=%s ldir=%s\n", fname, lineno, cwd, latestdir);
#endif
break;
}
CHECK_VALID_META(p);
/* Process according to record type. */
switch (buf[0]) {
case 'X': /* eXit */
Var_Delete(ldir_vname, VAR_GLOBAL);
lastpid = 0; /* no need to save ldir_vname */
break;
case 'F': /* [v]Fork */
{
char cldir[64];
int child;
child = atoi(p);
if (child > 0) {
snprintf(cldir, sizeof(cldir), LDIR_VNAME_FMT, child);
Var_Set(cldir, latestdir, VAR_GLOBAL, 0);
}
}
break;
case 'C': /* Chdir */
/* Update the latest directory. */
strlcpy(latestdir, p, sizeof(latestdir));
break;
case 'M': /* renaMe */
if (Lst_IsEmpty(missingFiles))
break;
/* 'L' and 'M' put single quotes around the args */
if (*p == '\'') {
char *ep;
p++;
if ((ep = strchr(p, '\'')))
*ep = '\0';
}
/* FALLTHROUGH */
case 'D': /* unlink */
if (*p == '/' && !Lst_IsEmpty(missingFiles)) {
/* remove p from the missingFiles list if present */
if ((ln = Lst_Find(missingFiles, p, string_match)) != NULL) {
char *tp = Lst_Datum(ln);
Lst_Remove(missingFiles, ln);
free(tp);
}
}
break;
case 'L': /* Link */
/* we want the target */
if (strsep(&p, " ") == NULL)
continue;
CHECK_VALID_META(p);
/* 'L' and 'M' put single quotes around the args */
if (*p == '\'') {
char *ep;
p++;
if ((ep = strchr(p, '\'')))
*ep = '\0';
}
/* FALLTHROUGH */
case 'W': /* Write */
/*
* If a file we generated within our bailiwick
* but outside of .OBJDIR is missing,
* we need to do it again.
*/
/* ignore non-absolute paths */
if (*p != '/')
break;
if (Lst_IsEmpty(metaBailiwick))
break;
/* ignore cwd - normal dependencies handle those */
if (strncmp(p, cwd, cwdlen) == 0)
break;
if (!Lst_ForEach(metaBailiwick, prefix_match, p))
break;
/* tmpdir might be within */
if (tmplen > 0 && strncmp(p, tmpdir, tmplen) == 0)
break;
/* ignore anything containing the string "tmp" */
if ((strstr("tmp", p)))
break;
if (stat(p, &fs) < 0) {
Lst_AtEnd(missingFiles, bmake_strdup(p));
}
break;
case 'R': /* Read */
case 'E': /* Exec */
/*
* Check for runtime files that can't
* be part of the dependencies because
* they are _expected_ to change.
*/
if (strncmp(p, "/tmp/", 5) == 0 ||
(tmplen > 0 && strncmp(p, tmpdir, tmplen) == 0))
break;
if (strncmp(p, "/var/", 5) == 0)
break;
/* Ignore device files. */
if (strncmp(p, "/dev/", 5) == 0)
break;
/* Ignore /etc/ files. */
if (strncmp(p, "/etc/", 5) == 0)
break;
if ((cp = strrchr(p, '/'))) {
cp++;
/*
* We don't normally expect to see this,
* but we do expect it to change.
*/
if (strcmp(cp, makeDependfile) == 0)
break;
}
/*
* The rest of the record is the file name.
* Check if it's not an absolute path.
*/
{
char *sdirs[4];
char **sdp;
int sdx = 0;
int found = 0;
if (*p == '/') {
sdirs[sdx++] = p; /* done */
} else {
if (strcmp(".", p) == 0)
continue; /* no point */
/* Check vs latestdir */
snprintf(fname1, sizeof(fname1), "%s/%s", latestdir, p);
sdirs[sdx++] = fname1;
if (strcmp(latestdir, cwd) != 0) {
/* Check vs cwd */
snprintf(fname2, sizeof(fname2), "%s/%s", cwd, p);
sdirs[sdx++] = fname2;
}
}
sdirs[sdx++] = NULL;
for (sdp = sdirs; *sdp && !found; sdp++) {
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: looking for: %s\n", fname, lineno, *sdp);
#endif
if (stat(*sdp, &fs) == 0) {
found = 1;
p = *sdp;
}
}
if (found) {
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: found: %s\n", fname, lineno, p);
#endif
if (!S_ISDIR(fs.st_mode) &&
fs.st_mtime > gn->mtime) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: file '%s' is newer than the target...\n", fname, lineno, p);
oodate = TRUE;
} else if (S_ISDIR(fs.st_mode)) {
/* Update the latest directory. */
realpath(p, latestdir);
}
} else if (errno == ENOENT && *p == '/' &&
strncmp(p, cwd, cwdlen) != 0) {
/*
* A referenced file outside of CWD is missing.
* We cannot catch every eventuality here...
*/
if (DEBUG(META))
fprintf(debug_file, "%s: %d: file '%s' may have moved?...\n", fname, lineno, p);
oodate = TRUE;
}
}
break;
default:
break;
}
} else if (strcmp(buf, "CMD") == 0) {
/*
* Compare the current command with the one in the
* meta data file.
*/
if (ln == NULL) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: there were more build commands in the meta data file than there are now...\n", fname, lineno);
oodate = TRUE;
} else {
char *cmd = (char *)Lst_Datum(ln);
if (!ignoreOODATE) {
if (strstr(cmd, "$?"))
ignoreOODATE = TRUE;
else if ((cp = strstr(cmd, ".OODATE"))) {
/* check for $[{(].OODATE[)}] */
if (cp > cmd + 2 && cp[-2] == '$')
ignoreOODATE = TRUE;
}
if (ignoreOODATE && DEBUG(META))
fprintf(debug_file, "%s: %d: cannot compare commands using .OODATE\n", fname, lineno);
}
cmd = Var_Subst(NULL, cmd, gn, TRUE);
if ((cp = strchr(cmd, '\n'))) {
int n;
/*
* This command contains newlines, we need to
* fetch more from the .meta file before we
* attempt a comparison.
*/
/* first put the newline back at buf[x - 1] */
buf[x - 1] = '\n';
do {
/* now fetch the next line */
if ((n = fgetLine(&buf, &bufsz, x, fp)) <= 0)
break;
x = n;
lineno++;
if (buf[x - 1] != '\n') {
warnx("%s: %d: line truncated at %u", fname, lineno, x);
break;
}
cp = strchr(++cp, '\n');
} while (cp);
if (buf[x - 1] == '\n')
buf[x - 1] = '\0';
}
if (!ignoreOODATE &&
!(gn->type & OP_NOMETA_CMP) &&
strcmp(p, cmd) != 0) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: a build command has changed\n%s\nvs\n%s\n", fname, lineno, p, cmd);
if (!metaIgnoreCMDs)
oodate = TRUE;
}
free(cmd);
ln = Lst_Succ(ln);
}
} else if (strcmp(buf, "CWD") == 0) {
/*
* Check if there are extra commands now
* that weren't in the meta data file.
*/
if (!oodate && ln != NULL) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: there are extra build commands now that weren't in the meta data file\n", fname, lineno);
oodate = TRUE;
}
if (strcmp(p, cwd) != 0) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: the current working directory has changed from '%s' to '%s'\n", fname, lineno, p, curdir);
oodate = TRUE;
}
}
}
fclose(fp);
if (!Lst_IsEmpty(missingFiles)) {
if (DEBUG(META))
fprintf(debug_file, "%s: missing files: %s...\n",
fname, (char *)Lst_Datum(Lst_First(missingFiles)));
oodate = TRUE;
Lst_Destroy(missingFiles, (FreeProc *)free);
}
} else {
if ((gn->type & OP_META)) {
if (DEBUG(META))
fprintf(debug_file, "%s: required but missing\n", fname);
oodate = TRUE;
}
}
if (oodate && ignoreOODATE) {
/*
* Target uses .OODATE, so we need to re-compute it.
* We need to clean up what Make_DoAllVar() did.
*/
Var_Delete(ALLSRC, gn);
Var_Delete(OODATE, gn);
gn->flags &= ~DONE_ALLSRC;
}
return oodate;
}
static FILE *
meta_create(BuildMon *pbm, GNode *gn)
{
meta_file_t mf;
char buf[MAXPATHLEN];
char objdir[MAXPATHLEN];
char **ptr;
const char *dname;
const char *tname;
char *fname;
const char *cp;
char *p[4]; /* >= possible uses */
int i;
struct stat fs;
/* This may be a phony node which we don't want meta data for... */
/* Skip .meta for .BEGIN, .END, .ERROR etc as well. */
/* Or it may be explicitly flagged as .NOMETA */
SKIP_META_TYPE(NOMETA);
/* Unless it is explicitly flagged as .META */
if (!(gn->type & OP_META)) {
SKIP_META_TYPE(PHONY);
SKIP_META_TYPE(SPECIAL);
SKIP_META_TYPE(MAKE);
}
mf.fp = NULL;
i = 0;
dname = Var_Value(".OBJDIR", gn, &p[i++]);
tname = Var_Value(TARGET, gn, &p[i++]);
/* The object directory may not exist. Check it.. */
if (stat(dname, &fs) != 0) {
if (DEBUG(META))
fprintf(debug_file, "Skipping meta for %s: no .OBJDIR\n",
gn->name);
goto out;
}
/* Check if there are no commands to execute. */
if (Lst_IsEmpty(gn->commands)) {
if (DEBUG(META))
fprintf(debug_file, "Skipping meta for %s: no commands\n",
gn->name);
goto out;
}
/* make sure these are canonical */
if (realpath(dname, objdir))
dname = objdir;
/* If we aren't in the object directory, don't create a meta file. */
if (!metaCurdirOk && strcmp(curdir, dname) == 0) {
if (DEBUG(META))
fprintf(debug_file, "Skipping meta for %s: .OBJDIR == .CURDIR\n",
gn->name);
goto out;
}
if (!(gn->type & OP_META)) {
/* We do not generate .meta files for sub-makes */
if (Lst_ForEach(gn->commands, is_submake, gn)) {
if (DEBUG(META))
fprintf(debug_file, "Skipping meta for %s: .MAKE\n",
gn->name);
goto out;
}
}
if (metaVerbose) {
char *mp;
/* Describe the target we are building */
mp = Var_Subst(NULL, "${" MAKE_META_PREFIX "}", gn, 0);
if (*mp)
fprintf(stdout, "%s\n", mp);
free(mp);
}
/* Get the basename of the target */
if ((cp = strrchr(tname, '/')) == NULL) {
cp = tname;
} else {
cp++;
}
fflush(stdout);
if (strcmp(cp, makeDependfile) == 0)
goto out;
if (!writeMeta)
/* Don't create meta data. */
goto out;
fname = meta_name(gn, pbm->meta_fname, sizeof(pbm->meta_fname),
dname, tname);
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "meta_create: %s\n", fname);
#endif
if ((mf.fp = fopen(fname, "w")) == NULL)
err(1, "Could not open meta file '%s'", fname);
fprintf(mf.fp, "# Meta data file %s\n", fname);
mf.gn = gn;
Lst_ForEach(gn->commands, printCMD, &mf);
fprintf(mf.fp, "CWD %s\n", getcwd(buf, sizeof(buf)));
fprintf(mf.fp, "TARGET %s\n", tname);
if (metaEnv) {
for (ptr = environ; *ptr != NULL; ptr++)
fprintf(mf.fp, "ENV %s\n", *ptr);
}
fprintf(mf.fp, "-- command output --\n");
fflush(mf.fp);
Var_Append(".MAKE.META.FILES", fname, VAR_GLOBAL);
Var_Append(".MAKE.META.CREATED", fname, VAR_GLOBAL);
gn->type |= OP_META; /* in case anyone wants to know */
if (metaSilent) {
gn->type |= OP_SILENT;
}
out:
for (i--; i >= 0; i--) {
if (p[i])
free(p[i]);
}
return (mf.fp);
}
static bool
parse_variable_assignment(const char *line, int ctxt)
{
const char *arg;
char *res1 = NULL, *res2 = NULL;
#define VAR_INVALID -1
#define VAR_NORMAL 0
#define VAR_SUBST 1
#define VAR_APPEND 2
#define VAR_SHELL 4
#define VAR_OPT 8
int type;
struct Name name;
arg = VarName_Get(line, &name, NULL, true,
FEATURES(FEATURE_SUNSHCMD) ? find_op1 : find_op2);
while (isspace(*arg))
arg++;
type = VAR_NORMAL;
while (*arg != '=') {
/* Check operator type. */
switch (*arg++) {
case '+':
if (type & (VAR_OPT|VAR_APPEND))
type = VAR_INVALID;
else
type |= VAR_APPEND;
break;
case '?':
if (type & (VAR_OPT|VAR_APPEND))
type = VAR_INVALID;
else
type |= VAR_OPT;
break;
case ':':
if (FEATURES(FEATURE_SUNSHCMD) &&
strncmp(arg, "sh", 2) == 0) {
type = VAR_SHELL;
arg += 2;
while (*arg != '=' && *arg != '\0')
arg++;
} else {
if (type & VAR_SUBST)
type = VAR_INVALID;
else
type |= VAR_SUBST;
}
break;
case '!':
if (type & VAR_SHELL)
type = VAR_INVALID;
else
type |= VAR_SHELL;
break;
default:
type = VAR_INVALID;
break;
}
if (type == VAR_INVALID) {
VarName_Free(&name);
return false;
}
}
arg++;
while (isspace(*arg))
arg++;
/* If the variable already has a value, we don't do anything. */
if ((type & VAR_OPT) && Var_Definedi(name.s, name.e)) {
VarName_Free(&name);
return true;
}
if (type & VAR_SHELL) {
char *err;
if (strchr(arg, '$') != NULL) {
char *sub;
/* There's a dollar sign in the command, so perform
* variable expansion on the whole thing. */
sub = Var_Subst(arg, NULL, true);
res1 = Cmd_Exec(sub, &err);
free(sub);
} else
res1 = Cmd_Exec(arg, &err);
if (err)
Parse_Error(PARSE_WARNING, err, arg);
arg = res1;
}
if (type & VAR_SUBST) {
/*
* Allow variables in the old value to be undefined, but leave
* their invocation alone -- this is done by forcing
* errorIsOkay to be false.
* XXX: This can cause recursive variables, but that's not
* hard to do, and this allows someone to do something like
*
* CFLAGS = $(.INCLUDES)
* CFLAGS := -I.. $(CFLAGS)
*
* And not get an error.
*/
bool saved = errorIsOkay;
errorIsOkay = false;
/* ensure the variable is set to something to avoid `variable
* is recursive' errors. */
if (!Var_Definedi(name.s, name.e))
Var_Seti_with_ctxt(name.s, name.e, "", ctxt);
res2 = Var_Subst(arg, NULL, false);
errorIsOkay = saved;
arg = res2;
}
if (type & VAR_APPEND)
Var_Appendi_with_ctxt(name.s, name.e, arg, ctxt);
else
Var_Seti_with_ctxt(name.s, name.e, arg, ctxt);
VarName_Free(&name);
free(res2);
free(res1);
return true;
}
/*-
*-----------------------------------------------------------------------
* Make_HandleUse --
* Function called by Make_Run and SuffApplyTransform on the downward
* pass to handle .USE and transformation nodes. It implements the
* .USE and transformation functionality by copying the node's commands,
* type flags and children to the parent node.
*
* A .USE node is much like an explicit transformation rule, except
* its commands are always added to the target node, even if the
* target already has commands.
*
* Input:
* cgn The .USE node
* pgn The target of the .USE node
*
* Results:
* none
*
* Side Effects:
* Children and commands may be added to the parent and the parent's
* type may be changed.
*
*-----------------------------------------------------------------------
*/
void
Make_HandleUse(GNode *cgn, GNode *pgn)
{
LstNode ln; /* An element in the children list */
#ifdef DEBUG_SRC
if ((cgn->type & (OP_USE|OP_USEBEFORE|OP_TRANSFORM)) == 0) {
fprintf(debug_file, "Make_HandleUse: called for plain node %s\n", cgn->name);
return;
}
#endif
if ((cgn->type & (OP_USE|OP_USEBEFORE)) || Lst_IsEmpty(pgn->commands)) {
if (cgn->type & OP_USEBEFORE) {
/*
* .USEBEFORE --
* prepend the child's commands to the parent.
*/
Lst cmds = pgn->commands;
pgn->commands = Lst_Duplicate(cgn->commands, NULL);
(void)Lst_Concat(pgn->commands, cmds, LST_CONCNEW);
Lst_Destroy(cmds, NULL);
} else {
/*
* .USE or target has no commands --
* append the child's commands to the parent.
*/
(void)Lst_Concat(pgn->commands, cgn->commands, LST_CONCNEW);
}
}
if (Lst_Open(cgn->children) == SUCCESS) {
while ((ln = Lst_Next(cgn->children)) != NULL) {
GNode *tgn, *gn = (GNode *)Lst_Datum(ln);
/*
* Expand variables in the .USE node's name
* and save the unexpanded form.
* We don't need to do this for commands.
* They get expanded properly when we execute.
*/
if (gn->uname == NULL) {
gn->uname = gn->name;
} else {
free(gn->name);
}
gn->name = Var_Subst(NULL, gn->uname, pgn, VARF_WANTRES);
if (gn->name && gn->uname && strcmp(gn->name, gn->uname) != 0) {
/* See if we have a target for this node. */
tgn = Targ_FindNode(gn->name, TARG_NOCREATE);
if (tgn != NULL)
gn = tgn;
}
(void)Lst_AtEnd(pgn->children, gn);
(void)Lst_AtEnd(gn->parents, pgn);
pgn->unmade += 1;
}
Lst_Close(cgn->children);
}
pgn->type |= cgn->type & ~(OP_OPMASK|OP_USE|OP_USEBEFORE|OP_TRANSFORM);
}
/*-
* main --
* The main function, for obvious reasons. Initializes variables
* and a few modules, then parses the arguments give it in the
* environment and on the command line. Reads the system makefile
* followed by either Makefile, makefile or the file given by the
* -f argument. Sets the MAKEFLAGS PMake variable based on all the
* flags it has received by then uses either the Make or the Compat
* module to create the initial list of targets.
*
* Results:
* If -q was given, exits -1 if anything was out-of-date. Else it exits
* 0.
*
* Side Effects:
* The program exits when done. Targets are created. etc. etc. etc.
*/
int
main(int argc, char **argv)
{
Lst targs; /* target nodes to create -- passed to Make_Init */
Boolean outOfDate; /* FALSE if all targets up to date */
Boolean hadErrors; /* TRUE if we had errors */
const char *p;
create = Lst_Init();
makefiles = Lst_Init();
beSilent = FALSE; /* Print commands as executed */
ignoreErrors = FALSE; /* Pay attention to non-zero returns */
noExecute = FALSE; /* Execute all commands */
keepgoing = FALSE; /* Stop on error */
allPrecious = FALSE; /* Remove targets when interrupted */
queryFlag = FALSE; /* This is not just a check-run */
noBuiltins = FALSE; /* Read the built-in rules */
touchFlag = FALSE; /* Actually update targets */
debug = 0; /* No debug verbosity, please. */
jobsRunning = FALSE;
noisy = FALSE;
maxJobs = 0; /* Set default max concurrency */
maxLocal = -1; /* Set default local max concurrency */
/*
* create internal commonly used strings
*/
string_init();
sNULL = string_create("");
sDOT = string_create(".");
sTARGET = string_create("@");
sOODATE = string_create("?");
sALLSRC = string_create(">");
sIMPSRC = string_create("<");
sPREFIX = string_create("*");
sARCHIVE = string_create("!");
sMEMBER = string_create("%");
s_TARGET = string_create(".TARGET");
s_OODATE = string_create(".OODATE");
s_ALLSRC = string_create(".ALLSRC");
s_IMPSRC = string_create(".IMPSRC");
s_PREFIX = string_create(".PREFIX");
s_ARCHIVE = string_create(".ARCHIVE");
s_MEMBER = string_create(".MEMBER");
s_TARGETS = string_create(".TARGETS");
s_INCLUDES = string_create(".INCLUDES");
s_LIBS = string_create(".LIBS");
sMAKE = string_create("MAKE");
sMAKEFLAGS = string_create("MAKEFLAGS");
sMFLAGS = string_create("MFLAGS");
sMACHINE = string_create("MACHINE");
sNPROC = string_create("NPROC");
sVPATH = string_create("VPATH");
sMAKEFILE = string_create("MAKEFILE");
sLIBSUFF = string_create(LIBSUFF);
sMAKEOBJDIR = string_create("MAKEOBJDIR");
sMAKESRCDIRPATH = string_create("MAKESRCDIRPATH");
sMAKEDIR = string_create("MAKEDIR");
sMAKETOP = string_create("MAKETOP");
sMAKESUB = string_create("MAKESUB");
s_DEFAULT = string_create(".DEFAULT");
s_INTERRUPT = string_create(".INTERRUPT");
s_BEGIN = string_create(".BEGIN");
s_END = string_create(".END");
s_ERROR = string_create(".ERROR");
s_EXIT = string_create(".EXIT");
/*
* Initialize the parsing, directory and variable modules to prepare
* for the reading of inclusion paths and variable settings on the
* command line
*/
Dir_Init(); /* Initialize directory structures so -I flags
* can be processed correctly */
Parse_Init(); /* Need to initialize the paths of #include
* directories */
Var_Init(); /* As well as the lists of variables for
* parsing arguments */
/*
* Initialize various variables.
* MAKE also gets this name, for compatibility
* MAKEFLAGS gets set to the empty string just in case.
* MFLAGS also gets initialized empty, for compatibility.
*/
Var_Set(sMAKE, string_create(argv[0]), VAR_GLOBAL);
Var_Set(sMAKEFLAGS, sNULL, VAR_GLOBAL);
Var_Set(sMFLAGS, sNULL, VAR_GLOBAL);
Var_Set(sMACHINE, string_create(MACHINE), VAR_GLOBAL);
Var_Set(sNPROC, string_create((p = getenv("NPROC")) ? p : "1"),
VAR_GLOBAL);
/*
* First snag any flags out of the MAKE environment variable.
* (Note this is *not* MAKEFLAGS since /bin/make uses that and it's
* in a different format).
*/
Main_ParseArgLine(getenv("MAKEFLAGS"));
MainParseArgs(argc, argv);
Cond_Setup();
/*
* Now make sure that maxJobs and maxLocal are positive. If
* not, use the value of NPROC (or 1 if NPROC is not positive)
*/
{
int nproc = atoi(Var_Value(sNPROC, VAR_GLOBAL));
if (nproc < 1)
nproc = 1;
if (maxJobs < 1)
maxJobs = nproc;
}
/*
* Initialize archive, target and suffix modules in preparation for
* parsing the makefile(s)
*/
Arch_Init();
Targ_Init();
Suff_Init();
DEFAULT = NILGNODE;
(void)time(&now);
/*
* Set up the .TARGETS variable to contain the list of targets to be
* created. If none specified, make the variable empty -- the parser
* will fill the thing in with the default or .MAIN target.
*/
if (!Lst_IsEmpty(create)) {
LstNode ln;
for (ln = Lst_First(create); ln != NILLNODE;
ln = Lst_Succ(ln)) {
string_t name = (string_t)Lst_Datum(ln);
Var_Append(s_TARGETS, name, VAR_GLOBAL);
}
} else
Var_Set(s_TARGETS, sNULL, VAR_GLOBAL);
/*
* Locate the correct working directory for make. Adjust for any
* movement taken from the directory of our parent if we are a
* sub-make.
*/
MakeSetWorkingDir("Makeconf");
/*
* Read in the built-in rules first, followed by the specified
* makefile, if it was (makefile != (char *) NULL), or the default
* Makefile and makefile, in that order, if it wasn't.
*/
if (!noBuiltins && !ReadMakefile(_PATH_DEFSYSMK, TRUE))
Fatal("make: no system rules (%s).", _PATH_DEFSYSMK);
if (!Lst_IsEmpty(makefiles)) {
LstNode ln;
ln = Lst_Find(makefiles, (ClientData)FALSE, ReadMakefileP);
if (ln != NILLNODE)
Fatal("make: cannot open %s.", (char *)Lst_Datum(ln));
} else if (!ReadMakefile("makefile", FALSE))
(void)ReadMakefile("Makefile", FALSE);
Var_Append(sMFLAGS, Var_StrValue(sMAKEFLAGS, VAR_GLOBAL), VAR_GLOBAL);
/* Install all the flags into the MAKEFLAGS envariable. */
if ((p = Var_Value(sMAKEFLAGS, VAR_GLOBAL)) && *p)
setenv("MAKEFLAGS", p, 1);
/*
* For compatibility, look at the directories in the VPATH variable
* and add them to the search path, if the variable is defined. The
* variable's value is in the same format as the PATH envariable, i.e.
* <directory>:<directory>:<directory>...
*/
if (Var_Exists(sVPATH, VAR_CMD)) {
char *vpath, *path, *cp, savec;
/*
* GCC stores string constants in read-only memory, but
* Var_Subst will want to write this thing, so store it
* in an array
*/
static char VPATH[] = "${VPATH}";
vpath = Var_Subst(VPATH, VAR_CMD, FALSE);
path = vpath;
do {
/* skip to end of directory */
for (cp = path; *cp != ':' && *cp != '\0'; cp++);
/* Save terminator character so know when to stop */
savec = *cp;
*cp = '\0';
/* Add directory to search path */
Dir_AddDir(dirSearchPath, string_create(path));
*cp = savec;
path = cp + 1;
} while (savec == ':');
(void)free((Address)vpath);
}
/*
* Now that all search paths have been read for suffixes et al, it's
* time to add the default search path to their lists...
*/
Suff_DoPaths();
/* print the initial graph, if the user requested it */
if (DEBUG(GRAPH1))
Targ_PrintGraph(1);
/*
* Have now read the entire graph and need to make a list of targets
* to create. If none was given on the command line, we consult the
* parsing module to find the main target(s) to create.
*/
if (Lst_IsEmpty(create))
targs = Parse_MainName();
else
targs = Targ_FindList(create, TARG_CREATE);
/*
* Initialize job module before traversing the graph, now that
* any .BEGIN and .END targets have been read. This is done
* only if the -q flag wasn't given (to prevent the .BEGIN from
* being executed should it exist).
*/
if (!queryFlag) {
if (maxLocal < 0 || maxLocal > maxJobs)
maxLocal = maxJobs;
Job_Init(maxJobs, maxLocal);
jobsRunning = TRUE;
}
/* Traverse the graph, checking on all the targets */
outOfDate = Make_Run(targs, &hadErrors);
/* print the graph now it's been processed if the user requested it */
if (DEBUG(GRAPH2))
Targ_PrintGraph(2);
return (hadErrors || (queryFlag && outOfDate));
}
/*-
*-----------------------------------------------------------------------
* Arch_ParseArchive --
* Parse the archive specification in the given line and find/create
* the nodes for the specified archive members, placing their nodes
* on the given list.
*
* Input:
* linePtr Pointer to start of specification
* nodeLst Lst on which to place the nodes
* ctxt Context in which to expand variables
*
* Results:
* SUCCESS if it was a valid specification. The linePtr is updated
* to point to the first non-space after the archive spec. The
* nodes for the members are placed on the given list.
*
* Side Effects:
* Some nodes may be created. The given list is extended.
*
*-----------------------------------------------------------------------
*/
ReturnStatus
Arch_ParseArchive(char **linePtr, Lst nodeLst, GNode *ctxt)
{
char *cp; /* Pointer into line */
GNode *gn; /* New node */
char *libName; /* Library-part of specification */
char *memName; /* Member-part of specification */
char *nameBuf; /* temporary place for node name */
char saveChar; /* Ending delimiter of member-name */
Boolean subLibName; /* TRUE if libName should have/had
* variable substitution performed on it */
libName = *linePtr;
subLibName = FALSE;
for (cp = libName; *cp != '(' && *cp != '\0'; cp++) {
if (*cp == '$') {
/*
* Variable spec, so call the Var module to parse the puppy
* so we can safely advance beyond it...
*/
int length;
void *freeIt;
char *result;
result = Var_Parse(cp, ctxt, VARF_UNDEFERR|VARF_WANTRES,
&length, &freeIt);
free(freeIt);
if (result == var_Error) {
return(FAILURE);
} else {
subLibName = TRUE;
}
cp += length-1;
}
}
*cp++ = '\0';
if (subLibName) {
libName = Var_Subst(NULL, libName, ctxt, VARF_UNDEFERR|VARF_WANTRES);
}
for (;;) {
/*
* First skip to the start of the member's name, mark that
* place and skip to the end of it (either white-space or
* a close paren).
*/
Boolean doSubst = FALSE; /* TRUE if need to substitute in memName */
while (*cp != '\0' && *cp != ')' && isspace ((unsigned char)*cp)) {
cp++;
}
memName = cp;
while (*cp != '\0' && *cp != ')' && !isspace ((unsigned char)*cp)) {
if (*cp == '$') {
/*
* Variable spec, so call the Var module to parse the puppy
* so we can safely advance beyond it...
*/
int length;
void *freeIt;
char *result;
result = Var_Parse(cp, ctxt, VARF_UNDEFERR|VARF_WANTRES,
&length, &freeIt);
free(freeIt);
if (result == var_Error) {
return(FAILURE);
} else {
doSubst = TRUE;
}
cp += length;
} else {
cp++;
}
}
/*
* If the specification ends without a closing parenthesis,
* chances are there's something wrong (like a missing backslash),
* so it's better to return failure than allow such things to happen
*/
if (*cp == '\0') {
printf("No closing parenthesis in archive specification\n");
return (FAILURE);
}
/*
* If we didn't move anywhere, we must be done
*/
if (cp == memName) {
break;
}
saveChar = *cp;
*cp = '\0';
/*
* XXX: This should be taken care of intelligently by
* SuffExpandChildren, both for the archive and the member portions.
*/
/*
* If member contains variables, try and substitute for them.
* This will slow down archive specs with dynamic sources, of course,
* since we'll be (non-)substituting them three times, but them's
* the breaks -- we need to do this since SuffExpandChildren calls
* us, otherwise we could assume the thing would be taken care of
* later.
*/
if (doSubst) {
char *buf;
char *sacrifice;
char *oldMemName = memName;
size_t sz;
memName = Var_Subst(NULL, memName, ctxt,
VARF_UNDEFERR|VARF_WANTRES);
/*
* Now form an archive spec and recurse to deal with nested
* variables and multi-word variable values.... The results
* are just placed at the end of the nodeLst we're returning.
*/
sz = strlen(memName)+strlen(libName)+3;
buf = sacrifice = bmake_malloc(sz);
snprintf(buf, sz, "%s(%s)", libName, memName);
if (strchr(memName, '$') && strcmp(memName, oldMemName) == 0) {
/*
* Must contain dynamic sources, so we can't deal with it now.
* Just create an ARCHV node for the thing and let
* SuffExpandChildren handle it...
*/
gn = Targ_FindNode(buf, TARG_CREATE);
if (gn == NULL) {
free(buf);
return(FAILURE);
} else {
gn->type |= OP_ARCHV;
(void)Lst_AtEnd(nodeLst, gn);
}
} else if (Arch_ParseArchive(&sacrifice, nodeLst, ctxt)!=SUCCESS) {
/*
* Error in nested call -- free buffer and return FAILURE
* ourselves.
*/
free(buf);
return(FAILURE);
}
/*
* Free buffer and continue with our work.
*/
free(buf);
} else if (Dir_HasWildcards(memName)) {
Lst members = Lst_Init(FALSE);
char *member;
size_t sz = MAXPATHLEN, nsz;
nameBuf = bmake_malloc(sz);
Dir_Expand(memName, dirSearchPath, members);
while (!Lst_IsEmpty(members)) {
member = (char *)Lst_DeQueue(members);
nsz = strlen(libName) + strlen(member) + 3;
if (sz > nsz)
nameBuf = bmake_realloc(nameBuf, sz = nsz * 2);
snprintf(nameBuf, sz, "%s(%s)", libName, member);
free(member);
gn = Targ_FindNode(nameBuf, TARG_CREATE);
if (gn == NULL) {
free(nameBuf);
return (FAILURE);
} else {
/*
* We've found the node, but have to make sure the rest of
* the world knows it's an archive member, without having
* to constantly check for parentheses, so we type the
* thing with the OP_ARCHV bit before we place it on the
* end of the provided list.
*/
gn->type |= OP_ARCHV;
(void)Lst_AtEnd(nodeLst, gn);
}
}
Lst_Destroy(members, NULL);
free(nameBuf);
} else {
size_t sz = strlen(libName) + strlen(memName) + 3;
nameBuf = bmake_malloc(sz);
snprintf(nameBuf, sz, "%s(%s)", libName, memName);
gn = Targ_FindNode(nameBuf, TARG_CREATE);
free(nameBuf);
if (gn == NULL) {
return (FAILURE);
} else {
/*
* We've found the node, but have to make sure the rest of the
* world knows it's an archive member, without having to
* constantly check for parentheses, so we type the thing with
* the OP_ARCHV bit before we place it on the end of the
* provided list.
*/
gn->type |= OP_ARCHV;
(void)Lst_AtEnd(nodeLst, gn);
}
}
if (doSubst) {
free(memName);
}
*cp = saveChar;
}
/*
* If substituted libName, free it now, since we need it no longer.
*/
if (subLibName) {
free(libName);
}
/*
* We promised the pointer would be set up at the next non-space, so
* we must advance cp there before setting *linePtr... (note that on
* entrance to the loop, cp is guaranteed to point at a ')')
*/
do {
cp++;
} while (*cp != '\0' && isspace ((unsigned char)*cp));
*linePtr = cp;
return (SUCCESS);
}
/*-
*-----------------------------------------------------------------------
* CompatRunCommand --
* Execute the next command for a target. If the command returns an
* error, the node's made field is set to ERROR and creation stops.
*
* Input:
* cmdp Command to execute
* gnp Node from which the command came
*
* Results:
* 0 if the command succeeded, 1 if an error occurred.
*
* Side Effects:
* The node's 'made' field may be set to ERROR.
*
*-----------------------------------------------------------------------
*/
int
CompatRunCommand(void *cmdp, void *gnp)
{
char *cmdStart; /* Start of expanded command */
char *cp, *bp;
Boolean silent, /* Don't print command */
doIt; /* Execute even if -n */
volatile Boolean errCheck; /* Check errors */
WAIT_T reason; /* Reason for child's death */
int status; /* Description of child's death */
pid_t cpid; /* Child actually found */
pid_t retstat; /* Result of wait */
LstNode cmdNode; /* Node where current command is located */
const char ** volatile av; /* Argument vector for thing to exec */
char ** volatile mav;/* Copy of the argument vector for freeing */
int argc; /* Number of arguments in av or 0 if not
* dynamically allocated */
Boolean local; /* TRUE if command should be executed
* locally */
Boolean useShell; /* TRUE if command should be executed
* using a shell */
char * volatile cmd = (char *)cmdp;
GNode *gn = (GNode *)gnp;
silent = gn->type & OP_SILENT;
errCheck = !(gn->type & OP_IGNORE);
doIt = FALSE;
cmdNode = Lst_Member(gn->commands, cmd);
cmdStart = Var_Subst(NULL, cmd, gn, FALSE);
/*
* brk_string will return an argv with a NULL in av[0], thus causing
* execvp to choke and die horribly. Besides, how can we execute a null
* command? In any case, we warn the user that the command expanded to
* nothing (is this the right thing to do?).
*/
if (*cmdStart == '\0') {
free(cmdStart);
Error("%s expands to empty string", cmd);
return(0);
}
cmd = cmdStart;
Lst_Replace(cmdNode, cmdStart);
if ((gn->type & OP_SAVE_CMDS) && (gn != ENDNode)) {
(void)Lst_AtEnd(ENDNode->commands, cmdStart);
return(0);
}
if (strcmp(cmdStart, "...") == 0) {
gn->type |= OP_SAVE_CMDS;
return(0);
}
while ((*cmd == '@') || (*cmd == '-') || (*cmd == '+')) {
switch (*cmd) {
case '@':
silent = DEBUG(LOUD) ? FALSE : TRUE;
break;
case '-':
errCheck = FALSE;
break;
case '+':
doIt = TRUE;
if (!meta[0]) /* we came here from jobs */
Compat_Init();
break;
}
cmd++;
}
while (isspace((unsigned char)*cmd))
cmd++;
#if !defined(MAKE_NATIVE)
/*
* In a non-native build, the host environment might be weird enough
* that it's necessary to go through a shell to get the correct
* behaviour. Or perhaps the shell has been replaced with something
* that does extra logging, and that should not be bypassed.
*/
useShell = TRUE;
#else
/*
* Search for meta characters in the command. If there are no meta
* characters, there's no need to execute a shell to execute the
* command.
*/
for (cp = cmd; !meta[(unsigned char)*cp]; cp++) {
continue;
}
useShell = (*cp != '\0');
#endif
/*
* Print the command before echoing if we're not supposed to be quiet for
* this one. We also print the command if -n given.
*/
if (!silent || NoExecute(gn)) {
printf("%s\n", cmd);
fflush(stdout);
}
/*
* If we're not supposed to execute any commands, this is as far as
* we go...
*/
if (!doIt && NoExecute(gn)) {
return (0);
}
if (DEBUG(JOB))
fprintf(debug_file, "Execute: '%s'\n", cmd);
again:
if (useShell) {
/*
* We need to pass the command off to the shell, typically
* because the command contains a "meta" character.
*/
static const char *shargv[4];
shargv[0] = shellPath;
/*
* The following work for any of the builtin shell specs.
*/
if (DEBUG(SHELL))
shargv[1] = "-xc";
else
shargv[1] = "-c";
shargv[2] = cmd;
shargv[3] = NULL;
av = shargv;
argc = 0;
bp = NULL;
mav = NULL;
} else {
/*
* No meta-characters, so no need to exec a shell. Break the command
* into words to form an argument vector we can execute.
*/
mav = brk_string(cmd, &argc, TRUE, &bp);
if (mav == NULL) {
useShell = 1;
goto again;
}
av = (const char **)mav;
}
local = TRUE;
#ifdef USE_META
if (useMeta) {
meta_compat_start();
}
#endif
/*
* Fork and execute the single command. If the fork fails, we abort.
*/
cpid = vFork();
if (cpid < 0) {
Fatal("Could not fork");
}
if (cpid == 0) {
Check_Cwd(av);
Var_ExportVars();
#ifdef USE_META
if (useMeta) {
meta_compat_child();
}
#endif
if (local)
(void)execvp(av[0], (char *const *)UNCONST(av));
else
(void)execv(av[0], (char *const *)UNCONST(av));
execError("exec", av[0]);
_exit(1);
}
if (mav)
free(mav);
if (bp)
free(bp);
Lst_Replace(cmdNode, NULL);
#ifdef USE_META
if (useMeta) {
meta_compat_parent();
}
#endif
/*
* The child is off and running. Now all we can do is wait...
*/
while (1) {
while ((retstat = wait(&reason)) != cpid) {
if (retstat > 0)
JobReapChild(retstat, reason, FALSE); /* not ours? */
if (retstat == -1 && errno != EINTR) {
break;
}
}
if (retstat > -1) {
if (WIFSTOPPED(reason)) {
status = WSTOPSIG(reason); /* stopped */
} else if (WIFEXITED(reason)) {
status = WEXITSTATUS(reason); /* exited */
#if defined(USE_META) && defined(USE_FILEMON_ONCE)
if (useMeta) {
meta_cmd_finish(NULL);
}
#endif
if (status != 0) {
if (DEBUG(ERROR)) {
fprintf(debug_file, "\n*** Failed target: %s\n*** Failed command: ",
gn->name);
for (cp = cmd; *cp; ) {
if (isspace((unsigned char)*cp)) {
fprintf(debug_file, " ");
while (isspace((unsigned char)*cp))
cp++;
} else {
fprintf(debug_file, "%c", *cp);
cp++;
}
}
fprintf(debug_file, "\n");
}
printf("*** Error code %d", status);
}
} else {
status = WTERMSIG(reason); /* signaled */
printf("*** Signal %d", status);
}
if (!WIFEXITED(reason) || (status != 0)) {
if (errCheck) {
#ifdef USE_META
if (useMeta) {
meta_job_error(NULL, gn, 0, status);
}
#endif
gn->made = ERROR;
if (keepgoing) {
/*
* Abort the current target, but let others
* continue.
*/
printf(" (continuing)\n");
}
} else {
/*
* Continue executing commands for this target.
* If we return 0, this will happen...
*/
printf(" (ignored)\n");
status = 0;
}
}
break;
} else {
Fatal("error in wait: %d: %s", retstat, strerror(errno));
/*NOTREACHED*/
}
}
free(cmdStart);
return (status);
}
/*
* Initialization we need after reading makefiles.
*/
void
meta_mode_init(const char *make_mode)
{
static int once = 0;
char *cp;
useMeta = TRUE;
useFilemon = TRUE;
writeMeta = TRUE;
if (make_mode) {
if (strstr(make_mode, "env"))
metaEnv = TRUE;
if (strstr(make_mode, "verb"))
metaVerbose = TRUE;
if (strstr(make_mode, "read"))
writeMeta = FALSE;
if (strstr(make_mode, "nofilemon"))
useFilemon = FALSE;
if (strstr(make_mode, "ignore-cmd"))
metaIgnoreCMDs = TRUE;
if (useFilemon)
get_mode_bf(filemonMissing, "missing-filemon=");
get_mode_bf(metaCurdirOk, "curdirok=");
get_mode_bf(metaMissing, "missing-meta=");
get_mode_bf(metaSilent, "silent=");
}
if (metaVerbose && !Var_Exists(MAKE_META_PREFIX, VAR_GLOBAL)) {
/*
* The default value for MAKE_META_PREFIX
* prints the absolute path of the target.
* This works be cause :H will generate '.' if there is no /
* and :tA will resolve that to cwd.
*/
Var_Set(MAKE_META_PREFIX, "Building ${.TARGET:H:tA}/${.TARGET:T}", VAR_GLOBAL, 0);
}
if (once)
return;
once = 1;
memset(&Mybm, 0, sizeof(Mybm));
/*
* We consider ourselves master of all within ${.MAKE.META.BAILIWICK}
*/
metaBailiwick = Lst_Init(FALSE);
metaBailiwickStr = Var_Subst(NULL, "${.MAKE.META.BAILIWICK:O:u:tA}",
VAR_GLOBAL, VARF_WANTRES);
if (metaBailiwickStr) {
str2Lst_Append(metaBailiwick, metaBailiwickStr, NULL);
}
/*
* We ignore any paths that start with ${.MAKE.META.IGNORE_PATHS}
*/
metaIgnorePaths = Lst_Init(FALSE);
Var_Append(MAKE_META_IGNORE_PATHS,
"/dev /etc /proc /tmp /var/run /var/tmp ${TMPDIR}", VAR_GLOBAL);
metaIgnorePathsStr = Var_Subst(NULL,
"${" MAKE_META_IGNORE_PATHS ":O:u:tA}", VAR_GLOBAL,
VARF_WANTRES);
if (metaIgnorePathsStr) {
str2Lst_Append(metaIgnorePaths, metaIgnorePathsStr, NULL);
}
/*
* We ignore any paths that match ${.MAKE.META.IGNORE_PATTERNS}
*/
cp = NULL;
if (Var_Value(MAKE_META_IGNORE_PATTERNS, VAR_GLOBAL, &cp)) {
metaIgnorePatterns = TRUE;
free(cp);
}
cp = NULL;
if (Var_Value(MAKE_META_IGNORE_FILTER, VAR_GLOBAL, &cp)) {
metaIgnoreFilter = TRUE;
free(cp);
}
}
static FILE *
meta_create(BuildMon *pbm, GNode *gn)
{
meta_file_t mf;
char buf[MAXPATHLEN];
char objdir[MAXPATHLEN];
char **ptr;
const char *dname;
const char *tname;
char *fname;
const char *cp;
char *p[4]; /* >= possible uses */
int i;
mf.fp = NULL;
i = 0;
dname = Var_Value(".OBJDIR", gn, &p[i++]);
tname = Var_Value(TARGET, gn, &p[i++]);
/* if this succeeds objdir is realpath of dname */
if (!meta_needed(gn, dname, tname, objdir, TRUE))
goto out;
dname = objdir;
if (metaVerbose) {
char *mp;
/* Describe the target we are building */
mp = Var_Subst(NULL, "${" MAKE_META_PREFIX "}", gn, VARF_WANTRES);
if (*mp)
fprintf(stdout, "%s\n", mp);
free(mp);
}
/* Get the basename of the target */
if ((cp = strrchr(tname, '/')) == NULL) {
cp = tname;
} else {
cp++;
}
fflush(stdout);
if (!writeMeta)
/* Don't create meta data. */
goto out;
fname = meta_name(gn, pbm->meta_fname, sizeof(pbm->meta_fname),
dname, tname, objdir);
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "meta_create: %s\n", fname);
#endif
if ((mf.fp = fopen(fname, "w")) == NULL)
err(1, "Could not open meta file '%s'", fname);
fprintf(mf.fp, "# Meta data file %s\n", fname);
mf.gn = gn;
Lst_ForEach(gn->commands, printCMD, &mf);
fprintf(mf.fp, "CWD %s\n", getcwd(buf, sizeof(buf)));
fprintf(mf.fp, "TARGET %s\n", tname);
if (metaEnv) {
for (ptr = environ; *ptr != NULL; ptr++)
fprintf(mf.fp, "ENV %s\n", *ptr);
}
fprintf(mf.fp, "-- command output --\n");
fflush(mf.fp);
Var_Append(".MAKE.META.FILES", fname, VAR_GLOBAL);
Var_Append(".MAKE.META.CREATED", fname, VAR_GLOBAL);
gn->type |= OP_META; /* in case anyone wants to know */
if (metaSilent) {
gn->type |= OP_SILENT;
}
out:
for (i--; i >= 0; i--) {
free(p[i]);
}
return (mf.fp);
}
Boolean
meta_oodate(GNode *gn, Boolean oodate)
{
static char *tmpdir = NULL;
static char cwd[MAXPATHLEN];
char lcwd_vname[64];
char ldir_vname[64];
char lcwd[MAXPATHLEN];
char latestdir[MAXPATHLEN];
char fname[MAXPATHLEN];
char fname1[MAXPATHLEN];
char fname2[MAXPATHLEN];
char fname3[MAXPATHLEN];
const char *dname;
const char *tname;
char *p;
char *cp;
char *link_src;
char *move_target;
static size_t cwdlen = 0;
static size_t tmplen = 0;
FILE *fp;
Boolean needOODATE = FALSE;
Lst missingFiles;
char *pa[4]; /* >= possible uses */
int i;
int have_filemon = FALSE;
if (oodate)
return oodate; /* we're done */
i = 0;
dname = Var_Value(".OBJDIR", gn, &pa[i++]);
tname = Var_Value(TARGET, gn, &pa[i++]);
/* if this succeeds fname3 is realpath of dname */
if (!meta_needed(gn, dname, tname, fname3, FALSE))
goto oodate_out;
dname = fname3;
missingFiles = Lst_Init(FALSE);
/*
* We need to check if the target is out-of-date. This includes
* checking if the expanded command has changed. This in turn
* requires that all variables are set in the same way that they
* would be if the target needs to be re-built.
*/
Make_DoAllVar(gn);
meta_name(gn, fname, sizeof(fname), dname, tname, dname);
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "meta_oodate: %s\n", fname);
#endif
if ((fp = fopen(fname, "r")) != NULL) {
static char *buf = NULL;
static size_t bufsz;
int lineno = 0;
int lastpid = 0;
int pid;
int x;
LstNode ln;
struct stat fs;
if (!buf) {
bufsz = 8 * BUFSIZ;
buf = bmake_malloc(bufsz);
}
if (!cwdlen) {
if (getcwd(cwd, sizeof(cwd)) == NULL)
err(1, "Could not get current working directory");
cwdlen = strlen(cwd);
}
strlcpy(lcwd, cwd, sizeof(lcwd));
strlcpy(latestdir, cwd, sizeof(latestdir));
if (!tmpdir) {
tmpdir = getTmpdir();
tmplen = strlen(tmpdir);
}
/* we want to track all the .meta we read */
Var_Append(".MAKE.META.FILES", fname, VAR_GLOBAL);
ln = Lst_First(gn->commands);
while (!oodate && (x = fgetLine(&buf, &bufsz, 0, fp)) > 0) {
lineno++;
if (buf[x - 1] == '\n')
buf[x - 1] = '\0';
else {
warnx("%s: %d: line truncated at %u", fname, lineno, x);
oodate = TRUE;
break;
}
link_src = NULL;
move_target = NULL;
/* Find the start of the build monitor section. */
if (!have_filemon) {
if (strncmp(buf, "-- filemon", 10) == 0) {
have_filemon = TRUE;
continue;
}
if (strncmp(buf, "# buildmon", 10) == 0) {
have_filemon = TRUE;
continue;
}
}
/* Delimit the record type. */
p = buf;
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: %s\n", fname, lineno, buf);
#endif
strsep(&p, " ");
if (have_filemon) {
/*
* We are in the 'filemon' output section.
* Each record from filemon follows the general form:
*
* <key> <pid> <data>
*
* Where:
* <key> is a single letter, denoting the syscall.
* <pid> is the process that made the syscall.
* <data> is the arguments (of interest).
*/
switch(buf[0]) {
case '#': /* comment */
case 'V': /* version */
break;
default:
/*
* We need to track pathnames per-process.
*
* Each process run by make, starts off in the 'CWD'
* recorded in the .meta file, if it chdirs ('C')
* elsewhere we need to track that - but only for
* that process. If it forks ('F'), we initialize
* the child to have the same cwd as its parent.
*
* We also need to track the 'latestdir' of
* interest. This is usually the same as cwd, but
* not if a process is reading directories.
*
* Each time we spot a different process ('pid')
* we save the current value of 'latestdir' in a
* variable qualified by 'lastpid', and
* re-initialize 'latestdir' to any pre-saved
* value for the current 'pid' and 'CWD' if none.
*/
CHECK_VALID_META(p);
pid = atoi(p);
if (pid > 0 && pid != lastpid) {
char *ldir;
char *tp;
if (lastpid > 0) {
/* We need to remember these. */
Var_Set(lcwd_vname, lcwd, VAR_GLOBAL, 0);
Var_Set(ldir_vname, latestdir, VAR_GLOBAL, 0);
}
snprintf(lcwd_vname, sizeof(lcwd_vname), LCWD_VNAME_FMT, pid);
snprintf(ldir_vname, sizeof(ldir_vname), LDIR_VNAME_FMT, pid);
lastpid = pid;
ldir = Var_Value(ldir_vname, VAR_GLOBAL, &tp);
if (ldir) {
strlcpy(latestdir, ldir, sizeof(latestdir));
free(tp);
}
ldir = Var_Value(lcwd_vname, VAR_GLOBAL, &tp);
if (ldir) {
strlcpy(lcwd, ldir, sizeof(lcwd));
free(tp);
}
}
/* Skip past the pid. */
if (strsep(&p, " ") == NULL)
continue;
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: %d: %c: cwd=%s lcwd=%s ldir=%s\n",
fname, lineno,
pid, buf[0], cwd, lcwd, latestdir);
#endif
break;
}
CHECK_VALID_META(p);
/* Process according to record type. */
switch (buf[0]) {
case 'X': /* eXit */
Var_Delete(lcwd_vname, VAR_GLOBAL);
Var_Delete(ldir_vname, VAR_GLOBAL);
lastpid = 0; /* no need to save ldir_vname */
break;
case 'F': /* [v]Fork */
{
char cldir[64];
int child;
child = atoi(p);
if (child > 0) {
snprintf(cldir, sizeof(cldir), LCWD_VNAME_FMT, child);
Var_Set(cldir, lcwd, VAR_GLOBAL, 0);
snprintf(cldir, sizeof(cldir), LDIR_VNAME_FMT, child);
Var_Set(cldir, latestdir, VAR_GLOBAL, 0);
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: %d: cwd=%s lcwd=%s ldir=%s\n",
fname, lineno,
child, cwd, lcwd, latestdir);
#endif
}
}
break;
case 'C': /* Chdir */
/* Update lcwd and latest directory. */
strlcpy(latestdir, p, sizeof(latestdir));
strlcpy(lcwd, p, sizeof(lcwd));
Var_Set(lcwd_vname, lcwd, VAR_GLOBAL, 0);
Var_Set(ldir_vname, lcwd, VAR_GLOBAL, 0);
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: cwd=%s ldir=%s\n", fname, lineno, cwd, lcwd);
#endif
break;
case 'M': /* renaMe */
/*
* For 'M'oves we want to check
* the src as for 'R'ead
* and the target as for 'W'rite.
*/
cp = p; /* save this for a second */
/* now get target */
if (strsep(&p, " ") == NULL)
continue;
CHECK_VALID_META(p);
move_target = p;
p = cp;
/* 'L' and 'M' put single quotes around the args */
DEQUOTE(p);
DEQUOTE(move_target);
/* FALLTHROUGH */
case 'D': /* unlink */
if (*p == '/' && !Lst_IsEmpty(missingFiles)) {
/* remove any missingFiles entries that match p */
if ((ln = Lst_Find(missingFiles, p,
path_match)) != NULL) {
LstNode nln;
char *tp;
do {
nln = Lst_FindFrom(missingFiles, Lst_Succ(ln),
p, path_match);
tp = Lst_Datum(ln);
Lst_Remove(missingFiles, ln);
free(tp);
} while ((ln = nln) != NULL);
}
}
if (buf[0] == 'M') {
/* the target of the mv is a file 'W'ritten */
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "meta_oodate: M %s -> %s\n",
p, move_target);
#endif
p = move_target;
goto check_write;
}
break;
case 'L': /* Link */
/*
* For 'L'inks check
* the src as for 'R'ead
* and the target as for 'W'rite.
*/
link_src = p;
/* now get target */
if (strsep(&p, " ") == NULL)
continue;
CHECK_VALID_META(p);
/* 'L' and 'M' put single quotes around the args */
DEQUOTE(p);
DEQUOTE(link_src);
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "meta_oodate: L %s -> %s\n",
link_src, p);
#endif
/* FALLTHROUGH */
case 'W': /* Write */
check_write:
/*
* If a file we generated within our bailiwick
* but outside of .OBJDIR is missing,
* we need to do it again.
*/
/* ignore non-absolute paths */
if (*p != '/')
break;
if (Lst_IsEmpty(metaBailiwick))
break;
/* ignore cwd - normal dependencies handle those */
if (strncmp(p, cwd, cwdlen) == 0)
break;
if (!Lst_ForEach(metaBailiwick, prefix_match, p))
break;
/* tmpdir might be within */
if (tmplen > 0 && strncmp(p, tmpdir, tmplen) == 0)
break;
/* ignore anything containing the string "tmp" */
if ((strstr("tmp", p)))
break;
if ((link_src != NULL && cached_lstat(p, &fs) < 0) ||
(link_src == NULL && cached_stat(p, &fs) < 0)) {
if (!meta_ignore(gn, p)) {
if (Lst_Find(missingFiles, p, string_match) == NULL)
Lst_AtEnd(missingFiles, bmake_strdup(p));
}
}
break;
check_link_src:
p = link_src;
link_src = NULL;
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "meta_oodate: L src %s\n", p);
#endif
/* FALLTHROUGH */
case 'R': /* Read */
case 'E': /* Exec */
/*
* Check for runtime files that can't
* be part of the dependencies because
* they are _expected_ to change.
*/
if (meta_ignore(gn, p))
break;
/*
* The rest of the record is the file name.
* Check if it's not an absolute path.
*/
{
char *sdirs[4];
char **sdp;
int sdx = 0;
int found = 0;
if (*p == '/') {
sdirs[sdx++] = p; /* done */
} else {
if (strcmp(".", p) == 0)
continue; /* no point */
/* Check vs latestdir */
snprintf(fname1, sizeof(fname1), "%s/%s", latestdir, p);
sdirs[sdx++] = fname1;
if (strcmp(latestdir, lcwd) != 0) {
/* Check vs lcwd */
snprintf(fname2, sizeof(fname2), "%s/%s", lcwd, p);
sdirs[sdx++] = fname2;
}
if (strcmp(lcwd, cwd) != 0) {
/* Check vs cwd */
snprintf(fname3, sizeof(fname3), "%s/%s", cwd, p);
sdirs[sdx++] = fname3;
}
}
sdirs[sdx++] = NULL;
for (sdp = sdirs; *sdp && !found; sdp++) {
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: looking for: %s\n", fname, lineno, *sdp);
#endif
if (cached_stat(*sdp, &fs) == 0) {
found = 1;
p = *sdp;
}
}
if (found) {
#ifdef DEBUG_META_MODE
if (DEBUG(META))
fprintf(debug_file, "%s: %d: found: %s\n", fname, lineno, p);
#endif
if (!S_ISDIR(fs.st_mode) &&
fs.st_mtime > gn->mtime) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: file '%s' is newer than the target...\n", fname, lineno, p);
oodate = TRUE;
} else if (S_ISDIR(fs.st_mode)) {
/* Update the latest directory. */
cached_realpath(p, latestdir);
}
} else if (errno == ENOENT && *p == '/' &&
strncmp(p, cwd, cwdlen) != 0) {
/*
* A referenced file outside of CWD is missing.
* We cannot catch every eventuality here...
*/
if (Lst_Find(missingFiles, p, string_match) == NULL)
Lst_AtEnd(missingFiles, bmake_strdup(p));
}
}
if (buf[0] == 'E') {
/* previous latestdir is no longer relevant */
strlcpy(latestdir, lcwd, sizeof(latestdir));
}
break;
default:
break;
}
if (!oodate && buf[0] == 'L' && link_src != NULL)
goto check_link_src;
} else if (strcmp(buf, "CMD") == 0) {
/*
* Compare the current command with the one in the
* meta data file.
*/
if (ln == NULL) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: there were more build commands in the meta data file than there are now...\n", fname, lineno);
oodate = TRUE;
} else {
char *cmd = (char *)Lst_Datum(ln);
Boolean hasOODATE = FALSE;
if (strstr(cmd, "$?"))
hasOODATE = TRUE;
else if ((cp = strstr(cmd, ".OODATE"))) {
/* check for $[{(].OODATE[:)}] */
if (cp > cmd + 2 && cp[-2] == '$')
hasOODATE = TRUE;
}
if (hasOODATE) {
needOODATE = TRUE;
if (DEBUG(META))
fprintf(debug_file, "%s: %d: cannot compare command using .OODATE\n", fname, lineno);
}
cmd = Var_Subst(NULL, cmd, gn, VARF_WANTRES|VARF_UNDEFERR);
if ((cp = strchr(cmd, '\n'))) {
int n;
/*
* This command contains newlines, we need to
* fetch more from the .meta file before we
* attempt a comparison.
*/
/* first put the newline back at buf[x - 1] */
buf[x - 1] = '\n';
do {
/* now fetch the next line */
if ((n = fgetLine(&buf, &bufsz, x, fp)) <= 0)
break;
x = n;
lineno++;
if (buf[x - 1] != '\n') {
warnx("%s: %d: line truncated at %u", fname, lineno, x);
break;
}
cp = strchr(++cp, '\n');
} while (cp);
if (buf[x - 1] == '\n')
buf[x - 1] = '\0';
}
if (!hasOODATE &&
!(gn->type & OP_NOMETA_CMP) &&
strcmp(p, cmd) != 0) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: a build command has changed\n%s\nvs\n%s\n", fname, lineno, p, cmd);
if (!metaIgnoreCMDs)
oodate = TRUE;
}
free(cmd);
ln = Lst_Succ(ln);
}
} else if (strcmp(buf, "CWD") == 0) {
/*
* Check if there are extra commands now
* that weren't in the meta data file.
*/
if (!oodate && ln != NULL) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: there are extra build commands now that weren't in the meta data file\n", fname, lineno);
oodate = TRUE;
}
if (strcmp(p, cwd) != 0) {
if (DEBUG(META))
fprintf(debug_file, "%s: %d: the current working directory has changed from '%s' to '%s'\n", fname, lineno, p, curdir);
oodate = TRUE;
}
}
}
fclose(fp);
if (!Lst_IsEmpty(missingFiles)) {
if (DEBUG(META))
fprintf(debug_file, "%s: missing files: %s...\n",
fname, (char *)Lst_Datum(Lst_First(missingFiles)));
oodate = TRUE;
}
if (!oodate && !have_filemon && filemonMissing) {
if (DEBUG(META))
fprintf(debug_file, "%s: missing filemon data\n", fname);
oodate = TRUE;
}
} else {
if (writeMeta && metaMissing) {
cp = NULL;
/* if target is in .CURDIR we do not need a meta file */
if (gn->path && (cp = strrchr(gn->path, '/')) && cp > gn->path) {
if (strncmp(curdir, gn->path, (cp - gn->path)) != 0) {
cp = NULL; /* not in .CURDIR */
}
}
if (!cp) {
if (DEBUG(META))
fprintf(debug_file, "%s: required but missing\n", fname);
oodate = TRUE;
needOODATE = TRUE; /* assume the worst */
}
}
}
Lst_Destroy(missingFiles, (FreeProc *)free);
if (oodate && needOODATE) {
/*
* Target uses .OODATE which is empty; or we wouldn't be here.
* We have decided it is oodate, so .OODATE needs to be set.
* All we can sanely do is set it to .ALLSRC.
*/
Var_Delete(OODATE, gn);
Var_Set(OODATE, Var_Value(ALLSRC, gn, &cp), gn, 0);
free(cp);
}
oodate_out:
for (i--; i >= 0; i--) {
free(pa[i]);
}
return oodate;
}
For *
For_Eval(const char *line)
{
const char *ptr = line;
const char *wrd;
char *sub;
const char *endVar;
For *arg;
unsigned long n;
while (ISSPACE(*ptr))
ptr++;
/* Parse loop. */
arg = emalloc(sizeof(*arg));
arg->nvars = 0;
Lst_Init(&arg->vars);
for (;;) {
/* Grab the variables. */
for (wrd = ptr; *ptr && !ISSPACE(*ptr); ptr++)
continue;
if (ptr - wrd == 0) {
Parse_Error(PARSE_FATAL, "Syntax error in for");
return 0;
}
endVar = ptr++;
while (ISSPACE(*ptr))
ptr++;
/* End of variable list ? */
if (endVar - wrd == 2 && wrd[0] == 'i' && wrd[1] == 'n')
break;
Lst_AtEnd(&arg->vars, Var_NewLoopVar(wrd, endVar));
arg->nvars++;
}
if (arg->nvars == 0) {
Parse_Error(PARSE_FATAL, "Missing variable in for");
return 0;
}
/* Make a list with the remaining words. */
sub = Var_Subst(ptr, NULL, false);
if (DEBUG(FOR)) {
LstNode ln;
(void)fprintf(stderr, "For: Iterator ");
for (ln = Lst_First(&arg->vars); ln != NULL; ln = Lst_Adv(ln))
(void)fprintf(stderr, "%s ",
Var_LoopVarName(Lst_Datum(ln)));
(void)fprintf(stderr, "List %s\n", sub);
}
Lst_Init(&arg->lst);
n = build_words_list(&arg->lst, sub);
free(sub);
if (arg->nvars != 1 && n % arg->nvars != 0) {
LstNode ln;
Parse_Error(PARSE_FATAL, "Wrong number of items in for loop");
(void)fprintf(stderr, "%lu items for %d variables:",
n, arg->nvars);
for (ln = Lst_First(&arg->lst); ln != NULL; ln = Lst_Adv(ln)) {
char *p = Lst_Datum(ln);
(void)fprintf(stderr, " %s", p);
}
(void)fprintf(stderr, "\n");
return 0;
}
arg->lineno = Parse_Getlineno();
arg->level = 1;
Buf_Init(&arg->buf, 0);
return arg;
}
/*-
* main --
* The main function, for obvious reasons. Initializes variables
* and a few modules, then parses the arguments give it in the
* environment and on the command line. Reads the system makefile
* followed by either Makefile, makefile or the file given by the
* -f argument. Sets the .MAKEFLAGS PMake variable based on all the
* flags it has received by then uses either the Make or the Compat
* module to create the initial list of targets.
*
* Results:
* If -q was given, exits -1 if anything was out-of-date. Else it exits
* 0.
*
* Side Effects:
* The program exits when done. Targets are created. etc. etc. etc.
*/
int
main(int argc, char **argv)
{
Lst targs; /* target nodes to create -- passed to Make_Init */
Boolean outOfDate = TRUE; /* FALSE if all targets up to date */
struct stat sb, sa;
char *p1, *path, *pwd;
char mdpath[MAXPATHLEN];
#ifdef FORCE_MACHINE
char *machine = FORCE_MACHINE;
#else
char *machine = getenv("MACHINE");
#endif
const char *machine_arch = getenv("MACHINE_ARCH");
char *syspath = getenv("MAKESYSPATH");
Lst sysMkPath; /* Path of sys.mk */
char *cp = NULL, *start;
/* avoid faults on read-only strings */
static char defsyspath[] = DEFAULT_SYS_PATH;
char found_path[MAXPATHLEN + 1]; /* for searching for sys.mk */
struct timeval rightnow; /* to initialize random seed */
/*
* Set the seed to produce a different random sequences
* on each program execution.
*/
gettimeofday(&rightnow, NULL);
srandom(rightnow.tv_sec + rightnow.tv_usec);
if ((progname = strrchr(argv[0], '/')) != NULL)
progname++;
else
progname = argv[0];
#ifdef RLIMIT_NOFILE
/*
* get rid of resource limit on file descriptors
*/
{
struct rlimit rl;
if (getrlimit(RLIMIT_NOFILE, &rl) != -1 &&
rl.rlim_cur != rl.rlim_max) {
rl.rlim_cur = rl.rlim_max;
(void)setrlimit(RLIMIT_NOFILE, &rl);
}
}
#endif
/*
* Find where we are and take care of PWD for the automounter...
* All this code is so that we know where we are when we start up
* on a different machine with pmake.
*/
if (getcwd(curdir, MAXPATHLEN) == NULL) {
(void)fprintf(stderr, "%s: %s.\n", progname, strerror(errno));
exit(2);
}
if (stat(curdir, &sa) == -1) {
(void)fprintf(stderr, "%s: %s: %s.\n",
progname, curdir, strerror(errno));
exit(2);
}
/*
* Overriding getcwd() with $PWD totally breaks MAKEOBJDIRPREFIX
* since the value of curdir can very depending on how we got
* here. Ie sitting at a shell prompt (shell that provides $PWD)
* or via subdir.mk in which case its likely a shell which does
* not provide it.
* So, to stop it breaking this case only, we ignore PWD if
* MAKEOBJDIRPREFIX is set or MAKEOBJDIR contains a transform.
*/
#ifndef NO_PWD_OVERRIDE
if ((pwd = getenv("PWD")) != NULL && getenv("MAKEOBJDIRPREFIX") == NULL) {
const char *makeobjdir = getenv("MAKEOBJDIR");
if (makeobjdir == NULL || !strchr(makeobjdir, '$')) {
if (stat(pwd, &sb) == 0 && sa.st_ino == sb.st_ino &&
sa.st_dev == sb.st_dev)
(void)strncpy(curdir, pwd, MAXPATHLEN);
}
}
#endif
/*
* Get the name of this type of MACHINE from utsname
* so we can share an executable for similar machines.
* (i.e. m68k: amiga hp300, mac68k, sun3, ...)
*
* Note that both MACHINE and MACHINE_ARCH are decided at
* run-time.
*/
if (!machine) {
#ifdef MAKE_NATIVE
struct utsname utsname;
if (uname(&utsname) == -1) {
(void)fprintf(stderr, "%s: uname failed (%s).\n", progname,
strerror(errno));
exit(2);
}
machine = utsname.machine;
#else
#ifdef MAKE_MACHINE
machine = MAKE_MACHINE;
#else
machine = "unknown";
#endif
#endif
}
if (!machine_arch) {
#ifndef MACHINE_ARCH
#ifdef MAKE_MACHINE_ARCH
machine_arch = MAKE_MACHINE_ARCH;
#else
machine_arch = "unknown";
#endif
#else
machine_arch = MACHINE_ARCH;
#endif
}
/*
* Just in case MAKEOBJDIR wants us to do something tricky.
*/
Var_Init(); /* Initialize the lists of variables for
* parsing arguments */
Var_Set(".CURDIR", curdir, VAR_GLOBAL, 0);
Var_Set("MACHINE", machine, VAR_GLOBAL, 0);
Var_Set("MACHINE_ARCH", machine_arch, VAR_GLOBAL, 0);
#ifdef MAKE_VERSION
Var_Set("MAKE_VERSION", MAKE_VERSION, VAR_GLOBAL, 0);
#endif
Var_Set(".newline", "\n", VAR_GLOBAL, 0); /* handy for :@ loops */
/*
* Find the .OBJDIR. If MAKEOBJDIRPREFIX, or failing that,
* MAKEOBJDIR is set in the environment, try only that value
* and fall back to .CURDIR if it does not exist.
*
* Otherwise, try _PATH_OBJDIR.MACHINE, _PATH_OBJDIR, and
* finally _PATH_OBJDIRPREFIX`pwd`, in that order. If none
* of these paths exist, just use .CURDIR.
*/
Dir_Init(curdir);
(void)Main_SetObjdir(curdir);
if ((path = getenv("MAKEOBJDIRPREFIX")) != NULL) {
(void)snprintf(mdpath, MAXPATHLEN, "%s%s", path, curdir);
(void)Main_SetObjdir(mdpath);
} else if ((path = getenv("MAKEOBJDIR")) != NULL) {
(void)Main_SetObjdir(path);
} else {
(void)snprintf(mdpath, MAXPATHLEN, "%s.%s", _PATH_OBJDIR, machine);
if (!Main_SetObjdir(mdpath) && !Main_SetObjdir(_PATH_OBJDIR)) {
(void)snprintf(mdpath, MAXPATHLEN, "%s%s",
_PATH_OBJDIRPREFIX, curdir);
(void)Main_SetObjdir(mdpath);
}
}
create = Lst_Init(FALSE);
makefiles = Lst_Init(FALSE);
printVars = FALSE;
variables = Lst_Init(FALSE);
beSilent = FALSE; /* Print commands as executed */
ignoreErrors = FALSE; /* Pay attention to non-zero returns */
noExecute = FALSE; /* Execute all commands */
noRecursiveExecute = FALSE; /* Execute all .MAKE targets */
keepgoing = FALSE; /* Stop on error */
allPrecious = FALSE; /* Remove targets when interrupted */
queryFlag = FALSE; /* This is not just a check-run */
noBuiltins = FALSE; /* Read the built-in rules */
touchFlag = FALSE; /* Actually update targets */
usePipes = TRUE; /* Catch child output in pipes */
debug = 0; /* No debug verbosity, please. */
jobsRunning = FALSE;
maxLocal = DEFMAXLOCAL; /* Set default local max concurrency */
#ifdef REMOTE
maxJobs = DEFMAXJOBS; /* Set default max concurrency */
#else
maxJobs = maxLocal;
#endif
compatMake = FALSE; /* No compat mode */
/*
* Initialize the parsing, directory and variable modules to prepare
* for the reading of inclusion paths and variable settings on the
* command line
*/
/*
* Initialize various variables.
* MAKE also gets this name, for compatibility
* .MAKEFLAGS gets set to the empty string just in case.
* MFLAGS also gets initialized empty, for compatibility.
*/
Parse_Init();
Var_Set("MAKE", argv[0], VAR_GLOBAL, 0);
Var_Set(".MAKE", argv[0], VAR_GLOBAL, 0);
Var_Set(MAKEFLAGS, "", VAR_GLOBAL, 0);
Var_Set(MAKEOVERRIDES, "", VAR_GLOBAL, 0);
Var_Set("MFLAGS", "", VAR_GLOBAL, 0);
Var_Set(".ALLTARGETS", "", VAR_GLOBAL, 0);
/*
* First snag any flags out of the MAKE environment variable.
* (Note this is *not* MAKEFLAGS since /bin/make uses that and it's
* in a different format).
*/
#ifdef POSIX
Main_ParseArgLine(getenv("MAKEFLAGS"));
#else
Main_ParseArgLine(getenv("MAKE"));
#endif
MainParseArgs(argc, argv);
/*
* Be compatible if user did not specify -j and did not explicitly
* turned compatibility on
*/
if (!compatMake && !forceJobs) {
compatMake = TRUE;
}
/*
* Initialize archive, target and suffix modules in preparation for
* parsing the makefile(s)
*/
Arch_Init();
Targ_Init();
Suff_Init();
Trace_Init(tracefile);
DEFAULT = NILGNODE;
(void)time(&now);
Trace_Log(MAKESTART, NULL);
/*
* Set up the .TARGETS variable to contain the list of targets to be
* created. If none specified, make the variable empty -- the parser
* will fill the thing in with the default or .MAIN target.
*/
if (!Lst_IsEmpty(create)) {
LstNode ln;
for (ln = Lst_First(create); ln != NILLNODE;
ln = Lst_Succ(ln)) {
char *name = (char *)Lst_Datum(ln);
Var_Append(".TARGETS", name, VAR_GLOBAL);
}
} else
Var_Set(".TARGETS", "", VAR_GLOBAL, 0);
/*
* If no user-supplied system path was given (through the -m option)
* add the directories from the DEFSYSPATH (more than one may be given
* as dir1:...:dirn) to the system include path.
*/
if (syspath == NULL || *syspath == '\0')
syspath = defsyspath;
else
syspath = strdup(syspath);
for (start = syspath; *start != '\0'; start = cp) {
for (cp = start; *cp != '\0' && *cp != ':'; cp++)
continue;
if (*cp == ':') {
*cp++ = '\0';
}
/* look for magic parent directory search string */
if (strncmp(".../", start, 4) != 0) {
(void)Dir_AddDir(defIncPath, start);
} else {
if (Dir_FindHereOrAbove(curdir, start+4,
found_path, sizeof(found_path))) {
(void)Dir_AddDir(defIncPath, found_path);
}
}
}
if (syspath != defsyspath)
free(syspath);
/*
* Read in the built-in rules first, followed by the specified
* makefile, if it was (makefile != NULL), or the default
* makefile and Makefile, in that order, if it wasn't.
*/
if (!noBuiltins) {
LstNode ln;
sysMkPath = Lst_Init(FALSE);
Dir_Expand(_PATH_DEFSYSMK,
Lst_IsEmpty(sysIncPath) ? defIncPath : sysIncPath,
sysMkPath);
if (Lst_IsEmpty(sysMkPath))
Fatal("%s: no system rules (%s).", progname,
_PATH_DEFSYSMK);
ln = Lst_Find(sysMkPath, (ClientData)NULL, ReadMakefile);
if (ln != NILLNODE)
Fatal("%s: cannot open %s.", progname,
(char *)Lst_Datum(ln));
}
if (!Lst_IsEmpty(makefiles)) {
LstNode ln;
ln = Lst_Find(makefiles, (ClientData)NULL, ReadMakefile);
if (ln != NILLNODE)
Fatal("%s: cannot open %s.", progname,
(char *)Lst_Datum(ln));
} else if (!ReadMakefile(UNCONST("makefile"), NULL))
(void)ReadMakefile(UNCONST("Makefile"), NULL);
(void)ReadMakefile(UNCONST(".depend"), NULL);
Var_Append("MFLAGS", Var_Value(MAKEFLAGS, VAR_GLOBAL, &p1), VAR_GLOBAL);
if (p1)
free(p1);
if (!jobServer && !compatMake)
Job_ServerStart(maxJobs);
if (DEBUG(JOB))
printf("job_pipe %d %d, maxjobs %d maxlocal %d compat %d\n", job_pipe[0], job_pipe[1], maxJobs,
maxLocal, compatMake);
Main_ExportMAKEFLAGS(TRUE); /* initial export */
#ifndef NO_CHECK_MAKE_CHDIR
Check_Cwd_av(0, NULL, 0); /* initialize it */
#endif
/*
* For compatibility, look at the directories in the VPATH variable
* and add them to the search path, if the variable is defined. The
* variable's value is in the same format as the PATH envariable, i.e.
* <directory>:<directory>:<directory>...
*/
if (Var_Exists("VPATH", VAR_CMD)) {
char *vpath, savec;
/*
* GCC stores string constants in read-only memory, but
* Var_Subst will want to write this thing, so store it
* in an array
*/
static char VPATH[] = "${VPATH}";
vpath = Var_Subst(NULL, VPATH, VAR_CMD, FALSE);
path = vpath;
do {
/* skip to end of directory */
for (cp = path; *cp != ':' && *cp != '\0'; cp++)
continue;
/* Save terminator character so know when to stop */
savec = *cp;
*cp = '\0';
/* Add directory to search path */
(void)Dir_AddDir(dirSearchPath, path);
*cp = savec;
path = cp + 1;
} while (savec == ':');
free(vpath);
}
/*
* Now that all search paths have been read for suffixes et al, it's
* time to add the default search path to their lists...
*/
Suff_DoPaths();
/*
* Propagate attributes through :: dependency lists.
*/
Targ_Propagate();
/* print the initial graph, if the user requested it */
if (DEBUG(GRAPH1))
Targ_PrintGraph(1);
/* print the values of any variables requested by the user */
if (printVars) {
LstNode ln;
for (ln = Lst_First(variables); ln != NILLNODE;
ln = Lst_Succ(ln)) {
char *var = (char *)Lst_Datum(ln);
char *value;
if (strchr(var, '$')) {
value = p1 = Var_Subst(NULL, var, VAR_GLOBAL, 0);
} else {
value = Var_Value(var, VAR_GLOBAL, &p1);
}
printf("%s\n", value ? value : "");
if (p1)
free(p1);
}
}
/*
* Have now read the entire graph and need to make a list of targets
* to create. If none was given on the command line, we consult the
* parsing module to find the main target(s) to create.
*/
if (Lst_IsEmpty(create))
targs = Parse_MainName();
else
targs = Targ_FindList(create, TARG_CREATE);
if (!compatMake && !printVars) {
/*
* Initialize job module before traversing the graph, now that
* any .BEGIN and .END targets have been read. This is done
* only if the -q flag wasn't given (to prevent the .BEGIN from
* being executed should it exist).
*/
if (!queryFlag) {
if (maxLocal == -1)
maxLocal = maxJobs;
Job_Init(maxJobs, maxLocal);
jobsRunning = TRUE;
}
/* Traverse the graph, checking on all the targets */
outOfDate = Make_Run(targs);
} else if (!printVars) {
/*
* Compat_Init will take care of creating all the targets as
* well as initializing the module.
*/
Compat_Run(targs);
}
#ifdef CLEANUP
Lst_Destroy(targs, NOFREE);
Lst_Destroy(variables, NOFREE);
Lst_Destroy(makefiles, NOFREE);
Lst_Destroy(create, (FreeProc *)free);
#endif
/* print the graph now it's been processed if the user requested it */
if (DEBUG(GRAPH2))
Targ_PrintGraph(2);
Trace_Log(MAKEEND, 0);
Suff_End();
Targ_End();
Arch_End();
Var_End();
Parse_End();
Dir_End();
Job_End();
Trace_End();
if (queryFlag && outOfDate)
return(1);
else
return(0);
}