mod_export void
countprompt(char *str, int *wp, int *hp, int overf)
{
int w = 0, h = 1;
int s = 1;
#ifdef MULTIBYTE_SUPPORT
int wcw, multi = 0;
char inchar;
mbstate_t mbs;
wchar_t wc;
memset(&mbs, 0, sizeof(mbs));
#endif
for (; *str; str++) {
if (w >= zterm_columns && overf >= 0) {
w = 0;
h++;
}
/*
* Input string should be metafied, so tokens in it should
* be real tokens, even if there are multibyte characters.
*/
if (*str == Inpar)
s = 0;
else if (*str == Outpar)
s = 1;
else if (*str == Nularg)
w++;
else if (s) {
if (*str == Meta) {
#ifdef MULTIBYTE_SUPPORT
inchar = *++str ^ 32;
#else
str++;
#endif
} else {
#ifdef MULTIBYTE_SUPPORT
/*
* Don't look for tab or newline in the middle
* of a multibyte character. Otherwise, we are
* relying on the character set being an extension
* of ASCII so it's safe to test a single byte.
*/
if (!multi) {
#endif
if (*str == '\t') {
w = (w | 7) + 1;
continue;
} else if (*str == '\n') {
w = 0;
h++;
continue;
}
#ifdef MULTIBYTE_SUPPORT
}
inchar = *str;
#endif
}
#ifdef MULTIBYTE_SUPPORT
switch (mbrtowc(&wc, &inchar, 1, &mbs)) {
case MB_INCOMPLETE:
/* Character is incomplete -- keep looking. */
multi = 1;
break;
case MB_INVALID:
memset(&mbs, 0, sizeof mbs);
/* Invalid character: assume single width. */
multi = 0;
w++;
break;
case 0:
multi = 0;
break;
default:
/*
* If the character isn't printable, WCWIDTH() returns
* -1. We assume width 1.
*/
wcw = WCWIDTH(wc);
if (wcw >= 0)
w += wcw;
else
w++;
multi = 0;
break;
}
#else
w++;
#endif
}
}
/*
* multi may still be set if we were in the middle of the character.
* This isn't easy to handle generally; just assume there's no
* output.
*/
if(w >= zterm_columns && overf >= 0) {
if (!overf || w > zterm_columns) {
w = 0;
h++;
}
}
if(wp)
*wp = w;
if(hp)
*hp = h;
}
static int
prompttrunc(int arg, int truncchar, int doprint, int endchar,
unsigned int *txtchangep)
{
if (arg > 0) {
char ch = *bv->fm, *ptr, *truncstr;
int truncatleft = ch == '<';
int w = bv->bp - bv->buf;
/*
* If there is already a truncation active, return so that
* can be finished, backing up so that the new truncation
* can be started afterwards.
*/
if (bv->truncwidth) {
while (*--bv->fm != '%')
;
bv->fm--;
return 0;
}
bv->truncwidth = arg;
if (*bv->fm != ']')
bv->fm++;
while (*bv->fm && *bv->fm != truncchar) {
if (*bv->fm == '\\' && bv->fm[1])
++bv->fm;
addbufspc(1);
*bv->bp++ = *bv->fm++;
}
if (!*bv->fm)
return 0;
if (bv->bp - bv->buf == w && truncchar == ']') {
addbufspc(1);
*bv->bp++ = '<';
}
ptr = bv->buf + w; /* addbufspc() may have realloc()'d bv->buf */
/*
* Now:
* bv->buf is the start of the output prompt buffer
* ptr is the start of the truncation string
* bv->bp is the end of the truncation string
*/
truncstr = ztrduppfx(ptr, bv->bp - ptr);
bv->bp = ptr;
w = bv->bp - bv->buf;
bv->fm++;
bv->trunccount = bv->dontcount;
putpromptchar(doprint, endchar, txtchangep);
bv->trunccount = 0;
ptr = bv->buf + w; /* putpromptchar() may have realloc()'d */
*bv->bp = '\0';
/*
* Now:
* ptr is the start of the truncation string and also
* where we need to start putting any truncated output
* bv->bp is the end of the string we have just added, which
* may need truncating.
*/
/*
* w below is screen width if multibyte support is enabled
* (note that above it was a raw string pointer difference).
* It's the full width of the string we may need to truncate.
*
* bv->truncwidth has come from the user, so we interpret this
* as a screen width, too.
*/
countprompt(ptr, &w, 0, -1);
if (w > bv->truncwidth) {
/*
* We need to truncate. t points to the truncation string
* -- which is inserted literally, without nice
* representation. twidth is its printing width, and maxwidth
* is the amount of the main string that we want to keep.
* Note that if the truncation string is longer than the
* truncation length (twidth > bv->truncwidth), the truncation
* string is used in full.
*/
char *t = truncstr;
int fullen = bv->bp - ptr;
int twidth, maxwidth;
int ntrunc = strlen(t);
twidth = MB_METASTRWIDTH(t);
if (twidth < bv->truncwidth) {
maxwidth = bv->truncwidth - twidth;
/*
* It's not safe to assume there are no invisible substrings
* just because the width is less than the full string
* length since there may be multibyte characters.
*/
addbufspc(ntrunc+1);
/* may have realloc'd */
ptr = bv->bp - fullen;
if (truncatleft) {
/*
* To truncate at the left, selectively copy
* maxwidth bytes from the main prompt, preceded
* by the truncation string in full.
*
* We're overwriting the string containing the
* text to be truncated, so copy it. We've
* just ensured there's sufficient space at the
* end of the prompt string.
*
* Pointer into text to be truncated.
*/
char *fulltextptr, *fulltext;
int remw;
#ifdef MULTIBYTE_SUPPORT
mbstate_t mbs;
memset(&mbs, 0, sizeof mbs);
#endif
fulltextptr = fulltext = ptr + ntrunc;
memmove(fulltext, ptr, fullen);
fulltext[fullen] = '\0';
/* Copy the truncstr into place. */
while (*t)
*ptr++ = *t++;
/*
* Find the point in the text at which we should
* start copying, i.e. when the remaining width
* is less than or equal to the maximum width.
*/
remw = w;
while (remw > maxwidth && *fulltextptr) {
if (*fulltextptr == Inpar) {
/*
* Text marked as invisible: copy
* regardless, since we don't know what
* this does. It only affects the width
* if there are Nularg's present.
* However, even in that case we
* can't break the sequence down, so
* we still loop over the entire group.
*/
for (;;) {
*ptr++ = *fulltextptr;
if (*fulltextptr == '\0' ||
*fulltextptr++ == Outpar)
break;
if (fulltextptr[-1] == Nularg)
remw--;
}
} else {
#ifdef MULTIBYTE_SUPPORT
/*
* Normal text: build up a multibyte character.
*/
char inchar;
wchar_t cc;
int wcw;
/*
* careful: string is still metafied (we
* need that because we don't know a
* priori when to stop and the resulting
* string must be metafied).
*/
if (*fulltextptr == Meta)
inchar = *++fulltextptr ^ 32;
else
inchar = *fulltextptr;
fulltextptr++;
switch (mbrtowc(&cc, &inchar, 1, &mbs)) {
case MB_INCOMPLETE:
/* Incomplete multibyte character. */
break;
case MB_INVALID:
/* Reset invalid state. */
memset(&mbs, 0, sizeof mbs);
/* FALL THROUGH */
case 0:
/* Assume a single-byte character. */
remw--;
break;
default:
wcw = WCWIDTH(cc);
if (wcw >= 0)
remw -= wcw;
else
remw--;
break;
}
#else
/* Single byte character */
if (*fulltextptr == Meta)
fulltextptr++;
fulltextptr++;
remw--;
#endif
}
}
/*
* Now simply copy the rest of the text. Still
* metafied, so this is easy.
*/
while (*fulltextptr)
*ptr++ = *fulltextptr++;
/* Mark the end of copying */
bv->bp = ptr;
} else {
/*
* Truncating at the right is easier: just leave
* enough characters until we have reached the
* maximum width.
*/
char *skiptext = ptr;
#ifdef MULTIBYTE_SUPPORT
mbstate_t mbs;
memset(&mbs, 0, sizeof mbs);
#endif
while (maxwidth > 0 && *skiptext) {
if (*skiptext == Inpar) {
/* see comment on left truncation above */
for (;;) {
if (*skiptext == '\0' ||
*skiptext++ == Outpar)
break;
if (skiptext[-1] == Nularg)
maxwidth--;
}
} else {
#ifdef MULTIBYTE_SUPPORT
char inchar;
wchar_t cc;
int wcw;
if (*skiptext == Meta)
inchar = *++skiptext ^ 32;
else
inchar = *skiptext;
skiptext++;
switch (mbrtowc(&cc, &inchar, 1, &mbs)) {
case MB_INCOMPLETE:
/* Incomplete character. */
break;
case MB_INVALID:
/* Reset invalid state. */
memset(&mbs, 0, sizeof mbs);
/* FALL THROUGH */
case 0:
/* Assume a single-byte character. */
maxwidth--;
break;
default:
wcw = WCWIDTH(cc);
if (wcw >= 0)
maxwidth -= wcw;
else
maxwidth--;
break;
}
#else
if (*skiptext == Meta)
skiptext++;
skiptext++;
maxwidth--;
#endif
}
}
/*
* We don't need the visible text from now on,
* but we'd better copy any invisible bits.
* History dictates that these go after the
* truncation string. This is sensible since
* they may, for example, turn off an effect which
* should apply to all text at this point.
*
* Copy the truncstr.
*/
ptr = skiptext;
while (*t)
*ptr++ = *t++;
bv->bp = ptr;
if (*skiptext) {
/* Move remaining text so we don't overwrite it */
memmove(bv->bp, skiptext, strlen(skiptext)+1);
skiptext = bv->bp;
/*
* Copy anything we want, updating bv->bp
*/
while (*skiptext) {
if (*skiptext == Inpar) {
for (;;) {
*bv->bp++ = *skiptext;
if (*skiptext == Outpar ||
*skiptext == '\0')
break;
skiptext++;
}
}
else
skiptext++;
}
}
}
} else {
/* Just copy truncstr; no other text appears. */
while (*t)
*ptr++ = *t++;
bv->bp = ptr;
}
*bv->bp = '\0';
}
zsfree(truncstr);
bv->truncwidth = 0;
/*
* We may have returned early from the previous putpromptchar *
* because we found another truncation following this one. *
* In that case we need to do the rest now. *
*/
if (!*bv->fm)
return 0;
if (*bv->fm != endchar) {
bv->fm++;
/*
* With bv->truncwidth set to zero, we always reach endchar *
* (or the terminating NULL) this time round. *
*/
if (!putpromptchar(doprint, endchar, txtchangep))
return 0;
}
/* Now we have to trick it into matching endchar again */
bv->fm--;
} else {
if (*bv->fm != endchar)
bv->fm++;
while(*bv->fm && *bv->fm != truncchar) {
if (*bv->fm == '\\' && bv->fm[1])
bv->fm++;
bv->fm++;
}
if (bv->truncwidth || !*bv->fm)
return 0;
}
return 1;
}
int
display(BUFFER * cur, BUFFER * prev, reverse_mode_t reverse)
{
int i, val, screen_x, screen_y, cw, line, rl;
char *ct;
erase();
move(0, 0);
if ((int)strlen(cmdstr) > COLS - 47)
printw("\"%-.*s..\" ", COLS - 49, cmdstr);
else
printw("\"%s\" ", cmdstr);
if (pause_status)
printw("--PAUSE--");
else if (opt_interval.tv_sec == 1 && opt_interval.tv_usec == 0)
printw("on every second");
else if (opt_interval.tv_usec == 0)
printw("on every %d seconds", (int)opt_interval.tv_sec);
else {
for (i = NUM_FRAQ_DIGITS_USEC, val = opt_interval.tv_usec;
val % 10 == 0; val /= 10)
i--;
printw("on every %d.%0*d seconds",
(int)opt_interval.tv_sec, i, val);
}
ct = ctime(&lastupdate);
ct[24] = '\0';
move(0, COLS - strlen(ct));
addstr(ct);
#define MODELINE(HOTKEY,SWITCH,MODE) \
do { \
printw(HOTKEY); \
if (reverse == SWITCH) attron(style); \
printw(MODE); \
if (reverse == SWITCH) attrset(A_NORMAL); \
} while (0/* CONSTCOND */)
move(1, COLS - 47);
printw("Reverse mode:");
MODELINE(" [w]", REVERSE_WORD, "word");
MODELINE(" [e]", REVERSE_LINE, "line");
MODELINE(" [r]", REVERSE_CHAR, "char");
printw(" [t]toggle");
move(1, 1);
if (prefix >= 0) {
if (decimal_point > 0) {
int power10;
for (i = 0, power10 = 1; i < decimal_point; i++)
power10 *= 10;
printw("%d.%0*d", prefix / power10, decimal_point,
prefix % power10);
} else if (decimal_point == 0)
printw("%d. ", prefix);
else
printw("%d ", prefix);
}
if (start_line != 0 || start_column != 0)
printw("(%d, %d)", start_line, start_column);
if (!prev || (cur == prev))
reverse = REVERSE_NONE;
for (line = start_line, screen_y = 2;
screen_y < LINES && line < MAXLINE && (*cur)[line][0];
line++, screen_y++) {
wchar_t *cur_line, *prev_line, *p, *pp;
rl = 0; /* reversing line */
cur_line = (*cur)[line];
prev_line = (*prev)[line];
for (p = cur_line, cw = 0; cw < start_column; p++)
cw += WCWIDTH(*p);
screen_x = cw - start_column;
for (pp = prev_line, cw = 0; cw < start_column; pp++)
cw += WCWIDTH(*pp);
switch (reverse) {
case REVERSE_LINE:
if (wcscmp(cur_line, prev_line)) {
attron(style);
rl = 1;
for (i = 0; i < screen_x; i++) {
move(screen_y, i);
addch(' ');
}
}
/* FALLTHROUGH */
case REVERSE_NONE:
move(screen_y, screen_x);
while (screen_x < COLS) {
if (*p && *p != L'\n') {
cw = wcwidth(*p);
if (screen_x + cw >= COLS)
break;
addwch(*p++);
pp++;
screen_x += cw;
} else if (rl) {
addch(' ');
screen_x++;
} else
break;
}
attrset(A_NORMAL);
break;
case REVERSE_WORD:
case REVERSE_CHAR:
move(screen_y, screen_x);
while (*p && screen_x < COLS) {
cw = wcwidth(*p);
if (screen_x + cw >= COLS)
break;
if (*p == *pp) {
addwch(*p++);
pp++;
screen_x += cw;
continue;
}
/*
* This method to reverse by word unit is not
* very fancy but it was easy to implement. If
* you are urged to rewrite this algorithm, it
* is right thing and don't hesitate to do so!
*/
/*
* If the word reverse option is specified and
* the current character is not a space, track
* back to the beginning of the word.
*/
if (reverse == REVERSE_WORD && !iswspace(*p)) {
while (cur_line + start_column < p &&
!iswspace(*(p - 1))) {
p--;
pp--;
screen_x -= wcwidth(*p);
}
move(screen_y, screen_x);
}
attron(style);
/* Print character itself. */
cw = wcwidth(*p);
addwch(*p++);
pp++;
screen_x += cw;
/*
* If the word reverse option is specified, and
* the current character is not a space, print
* the whole word which includes current
* character.
*/
if (reverse == REVERSE_WORD) {
while (*p && !iswspace(*p) &&
screen_x < COLS) {
cw = wcwidth(*p);
addwch(*p++);
pp++;
screen_x += cw;
}
}
attrset(A_NORMAL);
}
break;
}
}
move(1, 0);
refresh();
return (1);
}
