//
// Main application entry point.
//
int main(void)
{
#if defined(HOST_CM_TEST)
DWORD t1 = 0;
char st[80];
BOOL host_scan = FALSE;
UINT16 scan_count = 0;
#endif
static IPV4_ADDR dwLastIP[sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION)];
int i, nNets;
#if defined(SYS_USERIO_ENABLE)
static SYS_TICK startTick = 0;
int32_t LEDstate=SYS_USERIO_LED_DEASSERTED;
#endif // defined(SYS_USERIO_ENABLE)
TCPIP_NET_HANDLE netH;
const char *netName=0;
const char *netBiosName;
#if defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
char mDNSServiceName[] = "MyWebServiceNameX "; // base name of the service Must not exceed 16 bytes long
// the last digit will be incremented by interface
#endif // defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
// perform system initialization
if(!SYS_Initialize())
{
return 0;
}
SYS_CONSOLE_MESSAGE("\r\n\n\n --- TCPIP Demo Starts! --- \r\n");
SYS_OUT_MESSAGE("TCPIPStack " TCPIP_STACK_VERSION " "" ");
// Initialize the TCPIP stack
if (!TCPIP_STACK_Init(TCPIP_HOSTS_CONFIGURATION, sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION),
TCPIP_STACK_MODULE_CONFIG_TBL, sizeof (TCPIP_STACK_MODULE_CONFIG_TBL) / sizeof (*TCPIP_STACK_MODULE_CONFIG_TBL)))
{
return 0;
}
// Display the names associated with each interface
// Perform mDNS registration if mDNS is enabled
nNets = TCPIP_STACK_NetworksNo();
for(i = 0; i < nNets; i++)
{
netH = TCPIP_STACK_IxToNet(i);
netName = TCPIP_STACK_NetName(netH);
netBiosName = TCPIP_STACK_NetBIOSName(netH);
#if defined(TCPIP_STACK_USE_NBNS)
SYS_CONSOLE_PRINT(" Interface %s on host %s - NBNS enabled\r\n", netName, netBiosName);
#else
SYS_CONSOLE_PRINT(" Interface %s on host %s - NBNS disabled\r\n", netName, netBiosName);
#endif // defined(TCPIP_STACK_USE_NBNS)
#if defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
mDNSServiceName[sizeof(mDNSServiceName) - 2] = '1' + i;
mDNSServiceRegister( netH
, mDNSServiceName // name of the service
,"_http._tcp.local" // type of the service
,80 // TCP or UDP port, at which this service is available
,((const BYTE *)"path=/index.htm") // TXT info
,1 // auto rename the service when if needed
,NULL // no callback function
,NULL); // no application context
#endif //TCPIP_STACK_USE_ZEROCONF_MDNS_SD
}
#if defined (TCPIP_STACK_USE_IPV6)
TCPIP_ICMPV6_RegisterCallback(ICMPv6Callback);
#endif
#if defined(TCPIP_STACK_USE_ICMP_CLIENT)
ICMPRegisterCallback(PingProcessIPv4);
#endif
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
TCPIP_NET_HANDLE hWiFi = TCPIP_STACK_NetHandle("MRF24W");
if (hWiFi)
{
TCPIP_STACK_RegisterHandler(hWiFi, TCPIP_EV_RX_ALL | TCPIP_EV_TX_ALL | TCPIP_EV_RXTX_ERRORS, StackNotification, 0);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
#if defined(WF_UPDATE_FIRMWARE_UART_24G)
extern bool WF_FirmwareUpdate_Uart_24G(void);
WF_FirmwareUpdate_Uart_24G();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while (1)
{
SYS_Tasks();
#if defined(SYS_USERIO_ENABLE)
// Blink LED0 (right most one) every second.
if (SYS_TICK_Get() - startTick >= SYS_TICK_TicksPerSecondGet() / 2ul)
{
startTick = SYS_TICK_Get();
LEDstate ^= SYS_USERIO_LED_ASSERTED;
SYS_USERIO_SetLED(SYS_USERIO_LED_0, LEDstate);
}
#endif // defined(SYS_USERIO_ENABLE)
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
TCPIP_STACK_Task();
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(TCPIP_STACK_USE_TCP) && defined(APP_USE_FTP_CLIENT_DEMO)
FTPClient();
#endif
#if defined(TCPIP_STACK_USE_TCP) && defined(APP_USE_GENERIC_TCP_CLIENT_DEMO)
GenericTCPClient();
#endif
#if defined(TCPIP_STACK_USE_TCP) && defined(APP_USE_GENERIC_TCP_SERVER_DEMO)
GenericTCPServer();
#endif
#if defined(TCPIP_STACK_USE_SMTP_CLIENT) && defined(APP_USE_SMTP_CLIENT_DEMO)
SMTPDemo();
#endif
#if (defined(TCPIP_STACK_USE_ICMP_CLIENT) || defined (TCPIP_STACK_USE_IPV6)) && defined(APP_USE_PING_DEMO)
// use ping on the default interface
PingDemoTask();
#endif
#if defined(TCPIP_STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
// User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
//SNMPTrapDemo(); //This function sends the both SNMP trap version1 and 2 type of notifications
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
SNMPV2TrapDemo(); //This function sends the SNMP trap version 2 type of notifications
#endif
/*
SNMPSendTrap() is used to send trap notification to previously configured ip address if trap notification is enabled.
There are different trap notification code. The current implementation sends trap for authentication failure (4).
PreCondition: If application defined event occurs to send the trap. Declare a notification flag and update as the event occurs.
Uncomment the below function if the application requires.
if(notification flag is updated by the application as a predefined event occured)
{
SNMPSendTrap();
}
*/
#endif
#if defined(TCPIP_STACK_USE_BERKELEY_API) && defined(APP_USE_BERKELEY_API_DEMO)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo(0);
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the console display, UART, and Announce
// service
// We use the default interface
for (i = 0; i < sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION); i++)
{
netH = TCPIP_STACK_NetHandle(TCPIP_HOSTS_CONFIGURATION[i].interface);
if ((uint32_t) dwLastIP[i].Val != TCPIP_STACK_NetAddress(netH))
{
dwLastIP[i].Val = TCPIP_STACK_NetAddress(netH);
SYS_CONSOLE_PRINT("Interface Name is: %s\r\n", TCPIP_HOSTS_CONFIGURATION[i].interface);
SYS_CONSOLE_MESSAGE("New IP Address is: "); DisplayIPValue(dwLastIP[i]);
SYS_CONSOLE_MESSAGE("\r\n");
}
}
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
if (stackNotifyCnt)
{
stackNotifyCnt = 0;
ProcessNotification(stackNotifyHandle);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
#if defined(WF_UPDATE_FIRMWARE_TCPCLIENT_24G)
void WF_FirmwareUpdate_TcpClient_24G(void);
WF_FirmwareUpdate_TcpClient_24G();
#endif //defined(WF_UPDATE_FIRMWARE_TCPCLIENT_24G)
#if defined(HOST_CM_TEST)
switch (g_event)
{
case WF_EVENT_CONNECTION_PERMANENTLY_LOST:
case WF_EVENT_CONNECTION_FAILED:
g_event = 0xff; // clear current event
// if host scan is active, it can be forced inactive by connection/re-connection process
// so just reset host scan state to inactive.
host_scan = FALSE; // host scan inactive
SYS_CONSOLE_MESSAGE("Reconnecting....\r\n");
WF_Connect();
break;
case WF_EVENT_CONNECTION_SUCCESSFUL:
g_event = 0xff; // clear current event
// if host scan is active, it can be forced inactive by connection/re-connection process
// so just reset host scan state to inactive.
host_scan = FALSE; // host scan inactive
break;
case WF_EVENT_SCAN_RESULTS_READY:
g_event = 0xff; // clear current event
host_scan = FALSE; // host scan inactive
// Scan results are valid - OK to retrieve
if (SCANCXT.numScanResults > 0)
{
SCAN_SET_DISPLAY(SCANCXT.scanState);
SCANCXT.displayIdx = 0;
while (IS_SCAN_STATE_DISPLAY(SCANCXT.scanState))
WFDisplayScanMgr();
}
break;
case WF_EVENT_CONNECTION_TEMPORARILY_LOST:
// This event can happened when CM in module is enabled.
g_event = 0xff; // clear current event
// if host scan is active, it can be forced inactive by connection/re-connection process
// so just reset host scan state to inactive.
host_scan = FALSE; // host scan inactive
break;
default:
//sprintf(st,"skip event = %d\r\n",g_event);
//SYS_CONSOLE_MESSAGE(st);
break;
}
if (g_DhcpSuccessful)
{
/* Send and Receive UDP packets */
if(UDPIsOpened(socket1))
{
// UDP TX every 10 msec
if(SYS_TICK_Get() - timeudp >= SYS_TICK_TicksPerSecondGet() / 100)
{
timeudp = SYS_TICK_Get();
tx_number++;
LED0_IO ^= 1;
sprintf(str,"rem=%12lu",tx_number);
for(cntstr=16;cntstr<999;cntstr++)
str[cntstr]=cntstr;
str[999]=0;
// Send tx_number (formatted in a string)
if(UDPIsTxPutReady(socket1,1000)!=0)
{
UDPPutString(socket1,(BYTE *)str);
UDPFlush(socket1);
SYS_CONSOLE_MESSAGE(".");
}
}
// UDP RX tx_number of remote board
if(UDPIsGetReady(socket1)!=0)
{
LED1_IO ^= 1;
UDPGetArray(socket1,(BYTE *)str,1000);
str[16]=0;
//sprintf((char*)LCDText,"%sloc=%12lu",str,tx_number); // Write on EXP16 LCD local and remote TX number
//strcpypgm2ram(LCDText,str);
//LCDUpdate();
SYS_CONSOLE_MESSAGE("Rx");
}
}
// Do host scan
if((SYS_TICK_Get() - t1) >= SYS_TICK_TicksPerSecondGet() * 20)
{
t1 = SYS_TICK_Get();
if (!host_scan) // allow host scan if currently inactive
{
sprintf(st,"%d Scanning ..... event = %d\r\n",++scan_count, g_event);
SYS_CONSOLE_MESSAGE(st);
host_scan = TRUE; // host scan active
WF_Scan(0xff); // scan on all channels
}
}
} // DHCP status
#endif //HOST_CM_TEST
}
}
//
// Main application entry point.
//
int main(void)
{
static SYS_TICK startTick = 0;
static IPV4_ADDR dwLastIP[2] = { {-1}, {-1} };
IPV4_ADDR ipAddr;
SYS_USERIO_LED_STATE LEDstate = SYS_USERIO_LED_DEASSERTED;
int i, nNets;
TCPIP_NET_HANDLE netH;
const char *netName, *netBiosName;
#if defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
char mDNSServiceName[] = "MyWebServiceNameX "; // base name of the service Must not exceed 16 bytes long
// the last digit will be incremented by interface
#endif // defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
// perform system initialization
SYS_Initialize(0);
SYS_CONSOLE_MESSAGE("\r\n\n\n --- TCPIP Demo Starts! --- \r\n");
SYS_OUT_MESSAGE("TCPIPStack " TCPIP_STACK_VERSION " "" ");
// Display the names associated with each interface
nNets = TCPIP_STACK_NumberOfNetworksGet();
for(i = 0; i < nNets; i++)
{
netH = TCPIP_STACK_IndexToNet(i);
netName = TCPIP_STACK_NetNameGet(netH);
netBiosName = TCPIP_STACK_NetBIOSName(netH);
#if defined(TCPIP_STACK_USE_NBNS)
SYS_CONSOLE_PRINT(" Interface %s on host %s - NBNS enabled\r\n", netName, netBiosName);
#else
SYS_CONSOLE_PRINT(" Interface %s on host %s - NBNS disabled\r\n", netName, netBiosName);
#endif // defined(TCPIP_STACK_USE_NBNS)
#if defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
mDNSServiceName[sizeof(mDNSServiceName) - 2] = '1' + i;
TCPIP_MDNS_ServiceRegister( netH
, mDNSServiceName // name of the service
,"_http._tcp.local" // type of the service
,80 // TCP or UDP port, at which this service is available
,((const uint8_t *)"path=/index.htm") // TXT info
,1 // auto rename the service when if needed
,NULL // no callback function
,NULL); // no application context
#endif //TCPIP_STACK_USE_ZEROCONF_MDNS_SD
}
#if defined(WF_UPDATE_FIRMWARE_UART_24G)
extern bool WF_FirmwareUpdate_Uart_24G(void);
WF_FirmwareUpdate_Uart_24G();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while (1)
{
SYS_Tasks();
// Blink LED0 every second.
if (SYS_TICK_Get() - startTick >= SYS_TICK_TicksPerSecondGet() / 2ul)
{
startTick = SYS_TICK_Get();
LEDstate ^= SYS_USERIO_LED_ASSERTED;
SYS_USERIO_SetLED(SYS_USERIO_LED_0, LEDstate);
}
// if the IP address of an interface has changed
// display the new value on the system console
nNets = TCPIP_STACK_NumberOfNetworksGet();
for (i = 0; i < nNets; i++)
{
netH = TCPIP_STACK_IndexToNet(i);
ipAddr.Val = TCPIP_STACK_NetAddress(netH);
if(dwLastIP[i].Val != ipAddr.Val)
{
dwLastIP[i].Val = ipAddr.Val;
SYS_CONSOLE_MESSAGE(TCPIP_STACK_NetNameGet(netH));
SYS_CONSOLE_MESSAGE(" IP Address: ");
SYS_CONSOLE_PRINT("%d.%d.%d.%d \r\n", ipAddr.v[0], ipAddr.v[1], ipAddr.v[2], ipAddr.v[3]);
}
}
#if (WF_DEFAULT_NETWORK_TYPE == WF_NETWORK_TYPE_SOFT_AP)
if (g_scan_done) {
if (g_prescan_waiting) {
SYS_CONSOLE_MESSAGE((const char*)"\n SoftAP prescan results ........ \r\n\n");
SCANCXT.displayIdx = 0;
extern void WFDisplayScanMgr(void);
while (IS_SCAN_STATE_DISPLAY(SCANCXT.scanState)) {
WFDisplayScanMgr();
}
SYS_CONSOLE_MESSAGE((const char*)"\r\n ");
#if defined(WF_CS_TRIS)
Demo_Wifi_Connect();
#endif
g_scan_done = 0;
g_prescan_waiting = 0;
}
}
#endif // (WF_DEFAULT_NETWORK_TYPE == WF_NETWORK_TYPE_SOFT_AP)
#if defined(WF_UPDATE_FIRMWARE_UART_24G)
WF_FirmwareUpdate_Uart_24G();
#endif
#if defined(WF_UPDATE_FIRMWARE_TCPCLIENT_24G)
WF_FirmwareUpdate_TcpClient_24G();
#endif
}
}