int main(void) {
u32 stretch;
u32 samp_i;
/* Initialisation de plb_ac97 : */
XAC97_HardReset(PLB_AC97_BASEADDR);
XAC97_InitAudio(PLB_AC97_BASEADDR, 0);
XAC97_ClearFifos(PLB_AC97_BASEADDR);
/* Ajustement du volume audio : */
XAC97_WriteReg(PLB_AC97_BASEADDR, AC97_MasterVol, AC97_VOL_MAX);
XAC97_WriteReg(PLB_AC97_BASEADDR, AC97_AuxOutVol, AC97_VOL_ATTN_6_0_DB);
XAC97_WriteReg(PLB_AC97_BASEADDR, AC97_PCMOutVol, AC97_VOL_ATTN_6_0_DB);
/* Boucler : */
for (;;) {
for (samp_i = 0; samp_i < NUM_SAMPLES; ++samp_i) {
for (stretch = 0; stretch < STRETCH; ++stretch) {
XAC97_WriteFifo(PLB_AC97_BASEADDR, g_samples[samp_i]);
}
}
}
return 0;
}
int main() {
init_platform();
// Initialize the GPIO peripherals.
XGpio_Initialize(&gpPB, XPAR_PUSH_BUTTONS_5BITS_DEVICE_ID);
// Set the push button peripheral to be inputs.
XGpio_SetDataDirection(&gpPB, 1, 0x0000001F);
// Enable the global GPIO interrupt for push buttons.
XGpio_InterruptGlobalEnable(&gpPB);
// Enable all interrupts in the push button peripheral.
XGpio_InterruptEnable(&gpPB, 0xFFFFFFFF);
interrupts_init();
print("made it past interrupts_init\n\r");
// apparently we don't need to init it, just HardReset
XAC97_HardReset(XPAR_AXI_AC97_0_BASEADDR);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_ExtendedAudioStat, 1);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_PCM_DAC_Rate, AC97_PCM_RATE_11025_HZ);
XAC97_mSetControl(XPAR_AXI_AC97_0_BASEADDR, AC97_ENABLE_IN_FIFO_INTERRUPT);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_MasterVol, AC97_VOL_MAX);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_PCMOutVol, AC97_VOL_MAX);
while (1);
cleanup_platform();
return 0;
}
/* Audio Codec Intialization
\param[in] Xuint32 ac97
*/
void audio_init_ac97(Xuint32 ac97) {
XAC97_HardReset(ac97);
XAC97_WriteReg(ac97, AC97_MasterVol, AC97_VOL_ATTN_9_0_DB);
XAC97_WriteReg(ac97, AC97_AuxOutVol, AC97_VOL_ATTN_9_0_DB);
XAC97_WriteReg(ac97, AC97_PCMOutVol, AC97_VOL_ATTN_9_0_DB);
XAC97_WriteReg(ac97, AC97_ExtendedAudioStat,
AC97_EXTENDED_AUDIO_CONTROL_VRA);
XAC97_WriteReg(ac97, AC97_PCM_DAC_Rate, AC97_PCM_RATE_48000_HZ);
}
// Inits the AC97. Note: you must also enable interrupts by either calling
// sound_initInterupts, or create your own interrupt handler routine.
void sound_initAC97()
{
XAC97_HardReset(XPAR_AXI_AC97_0_BASEADDR);
XAC97_ClearFifos(XPAR_AXI_AC97_0_BASEADDR);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_ExtendedAudioStat, AC97_EXTENDED_AUDIO_CONTROL_VRA);
XAC97_AwaitCodecReady(XPAR_AXI_AC97_0_BASEADDR);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_PCM_DAC_Rate, AC97_PCM_RATE_11025_HZ);
XAC97_AwaitCodecReady(XPAR_AXI_AC97_0_BASEADDR);
XAC97_mSetControl(XPAR_AXI_AC97_0_BASEADDR, AC97_ENABLE_IN_FIFO_INTERRUPT);
XAC97_Delay(100000);
}
void sound_setVolume(int volume)
{
if(volume > MAX_VOLUME)
volume = MAX_VOLUME;
if(volume < MIN_VOLUME)
volume = MIN_VOLUME;
volumeLevel = volume;
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_PCMOutVol, sound_getAC97Attn(volume));
}
int main() {
init_platform();
print("Hello World\n\r");
// apparently we don't need to init it, just HardReset
XAC97_HardReset(XPAR_AXI_AC97_0_BASEADDR);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_ExtendedAudioStat, 1);
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_PCM_DAC_Rate, AC97_PCM_RATE_11025_HZ);
while (1) {
XAC97_PlayAudio(XPAR_AXI_AC97_0_BASEADDR, tankFireSound, &tankFireSound[tankFireSoundFrames]);
XAC97_Delay(1000000);
}
cleanup_platform();
return 0;
}
/* Ac97 Volume
Volume has been divided into 8 levels to
correspond to 8 leds
\param[in] Xuint32 volume
*/
void audio_set_volume(Xuint32 address, int volume) {
Xuint32 v = 0;
#define VOL(val, def) case val: v = def; break;
switch(volume)
{
VOL(0, AC97_VOL_ATTN_44_5_DB);
VOL(1, AC97_VOL_ATTN_41_5_DB);
VOL(2, AC97_VOL_ATTN_35_5_DB);
VOL(3, AC97_VOL_ATTN_29_5_DB);
VOL(4, AC97_VOL_ATTN_23_5_DB);
VOL(5, AC97_VOL_ATTN_17_5_DB);
VOL(6, AC97_VOL_ATTN_11_5_DB);
VOL(7, AC97_VOL_ATTN_6_0_DB);
VOL(8, AC97_VOL_ATTN_0_DB);
default: break;
}
XAC97_WriteReg(address, AC97_PCMOutVol, v);
XAC97_WriteReg(address, AC97_MasterVol, AC97_VOL_MAX );
XAC97_WriteReg(address, AC97_AuxOutVol, AC97_VOL_MAX);
XAC97_WriteReg(address, AC97_MasterVolMono, AC97_VOL_MAX);
}
void audio_mute(Xuint32 address) {
XAC97_WriteReg(address, AC97_MasterVol, AC97_VOL_MUTE );
XAC97_WriteReg(address, AC97_MasterVol, AC97_VOL_MUTE );
XAC97_WriteReg(address, AC97_AuxOutVol, AC97_VOL_MUTE);
XAC97_WriteReg(address, AC97_MasterVolMono, AC97_VOL_MUTE);
}
void audio_set_sampling(Xuint32 address, Xuint32 freq) {
XAC97_WriteReg(address, AC97_PCM_DAC_Rate, freq);
}
void volume_up(){
vol_level = (vol_level==0) ? vol_level : --vol_level; // don't dec if maxed out
uint32_t vol = AC97_VOL_MAX + volumes[vol_level];
XAC97_WriteReg(XPAR_AXI_AC97_0_BASEADDR, AC97_PCMOutVol, vol);
}
void Foliage::SoundManager::init()
{
// hard reset & initialization
XAC97_HardReset(XPAR_AUDIO_CODEC_BASEADDR);
XAC97_InitAudio(XPAR_AUDIO_CODEC_BASEADDR, AC97_ANALOG_LOOPBACK);
XAC97_DisableInput(XPAR_AUDIO_CODEC_BASEADDR, AC97_MIC_INPUT);
XAC97_DisableInput(XPAR_AUDIO_CODEC_BASEADDR, AC97_LINE_INPUT);
XAC97_AwaitCodecReady(XPAR_AUDIO_CODEC_BASEADDR);
// volume settings
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_MasterVol, AC97_VOL_MAX);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_AuxOutVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_MasterVolMono, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_PCBeepVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_PhoneInVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_MicVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_LineInVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_CDVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_VideoVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_AuxInVol, AC97_VOL_MUTE);
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_PCMOutVol, AC97_VOL_MAX);
XAC97_AwaitCodecReady(XPAR_AUDIO_CODEC_BASEADDR);
// VRA mode OFF
XAC97_WriteReg(XPAR_AUDIO_CODEC_BASEADDR, AC97_ExtendedAudioStat, 0);
// clear FIFOs
XAC97_ClearFifos(XPAR_AUDIO_CODEC_BASEADDR);
// interrupt
XIntc_RegisterHandler(XPAR_OPB_INTC_0_BASEADDR,
XPAR_OPB_INTC_0_AUDIO_CODEC_INTERRUPT_INTR,
(XInterruptHandler)Foliage::SoundManager::AC97_Callback,
NULL);
XAC97_mSetControl(XPAR_AUDIO_CODEC_BASEADDR, AC97_ENABLE_IN_FIFO_INTERRUPT);
std::cout << " * sound manager initialized" << std::endl;
}