/**
*
* This function transmits one packet non-blockingly through the DMA engine.
*
* @param AxiDmaInstPtr points to the DMA engine instance
*
* @return - XST_SUCCESS if the DMA accepts the packet successfully,
* - XST_FAILURE otherwise.
*
* @note None.
*
******************************************************************************/
static int SendPacket(XAxiDma * AxiDmaInstPtr,int c)
{
XAxiDma_BdRing *TxRingPtr; //TxRing
cplx_data_t *TxPacket; //PacketPointer
//cplx_data_t *RxClean; //CleanData Do in RxSetup
XAxiDma_Bd *BdPtr; //Start BDPointer
int Status;
int Index;
char str[30];
TxRingPtr = XAxiDma_GetTxRing(AxiDmaInstPtr);
TxPacket = (cplx_data_t *)stim_buf; //setPointerForPacket
/* Flush the SrcBuffer before the DMA transfer, in case the Data Cache
* is enabled
*/
Xil_DCacheFlushRange((u32)TxPacket, MAX_PKT_LEN*64); //8 point each packet
int FreeBdCount = XAxiDma_BdRingGetFreeCnt(TxRingPtr);
xil_printf("TxFreeBdCount %d", FreeBdCount);
/* Allocate a BD */
Status = XAxiDma_BdRingAlloc(TxRingPtr, 32, &BdPtr);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
xil_printf("check1");
XAxiDma_Bd *BdCurPtr;
u32 TxBufferPtr;
BdCurPtr = BdPtr; // Set Current BDptr
TxBufferPtr = (u32)stim_buf;
for (Index = 0; Index < 32; Index++) {
Status = XAxiDma_BdSetBufAddr(BdCurPtr, TxBufferPtr);
if (Status != XST_SUCCESS) {
xil_printf("Tx set buffer addr %x on BD %x failed %d\r\n",
(unsigned int)TxBufferPtr, (unsigned int)BdCurPtr, Status);
return XST_FAILURE;
}
Status = XAxiDma_BdSetLength(BdCurPtr, MAX_PKT_LEN*4,
TxRingPtr->MaxTransferLen);
if (Status != XST_SUCCESS) {
xil_printf("Tx set length %d on BD %x failed %d\r\n",
MAX_PKT_LEN*4, (unsigned int)BdCurPtr, Status);
return XST_FAILURE;
}
#if (XPAR_AXIDMA_0_SG_INCLUDE_STSCNTRL_STRM == 1)
Status = XAxiDma_BdSetAppWord(BdCurPtr,
XAXIDMA_LAST_APPWORD, MAX_PKT_LEN*2);
/* If Set app length failed, it is not fatal
*/
if (Status != XST_SUCCESS) {
xil_printf("Set app word failed with %d\r\n", Status);
}
#endif
/* For single packet, both SOF and EOF are to be set
*/
XAxiDma_BdSetCtrl(BdCurPtr, XAXIDMA_BD_CTRL_TXEOF_MASK |
XAXIDMA_BD_CTRL_TXSOF_MASK);
XAxiDma_BdSetId(BdCurPtr, (u32) TxBufferPtr);
TxBufferPtr += MAX_PKT_LEN*4;
BdCurPtr = XAxiDma_BdRingNext(TxRingPtr, BdCurPtr);
}
/* Give the BD to DMA to kick off the transmission. */
Status = XAxiDma_BdRingToHw(TxRingPtr, 32, BdPtr);
if (Status != XST_SUCCESS) {
xil_printf("to hw failed %d\r\n", Status);
return XST_FAILURE;
}
return XST_SUCCESS;
}
/**
*
* This function transmits one packet non-blockingly through the DMA engine.
*
* @param AxiDmaInstPtr points to the DMA engine instance
*
* @return - XST_SUCCESS if the DMA accepts the packet successfully,
* - XST_FAILURE otherwise.
*
* @note None.
*
******************************************************************************/
static int SendPacket(XAxiDma * AxiDmaInstPtr)
{
XAxiDma_BdRing *TxRingPtr;
u8 *TxPacket;
u8 Value;
XAxiDma_Bd *BdPtr;
int Status;
int Index;
TxRingPtr = XAxiDma_GetTxRing(AxiDmaInstPtr);
/* Create pattern in the packet to transmit */
TxPacket = (u8 *) Packet;
Value = TEST_START_VALUE;
for(Index = 0; Index < MAX_PKT_LEN; Index ++) {
TxPacket[Index] = Value;
Value = (Value + 1) & 0xFF;
}
/* Flush the SrcBuffer before the DMA transfer, in case the Data Cache
* is enabled
*/
Xil_DCacheFlushRange((u32)TxPacket, MAX_PKT_LEN);
/* Allocate a BD */
Status = XAxiDma_BdRingAlloc(TxRingPtr, 1, &BdPtr);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
/* Set up the BD using the information of the packet to transmit */
Status = XAxiDma_BdSetBufAddr(BdPtr, (u32) Packet);
if (Status != XST_SUCCESS) {
xil_printf("Tx set buffer addr %x on BD %x failed %d\r\n",
(unsigned int)Packet, (unsigned int)BdPtr, Status);
return XST_FAILURE;
}
Status = XAxiDma_BdSetLength(BdPtr, MAX_PKT_LEN,
TxRingPtr->MaxTransferLen);
if (Status != XST_SUCCESS) {
xil_printf("Tx set length %d on BD %x failed %d\r\n",
MAX_PKT_LEN, (unsigned int)BdPtr, Status);
return XST_FAILURE;
}
#if (XPAR_AXIDMA_0_SG_INCLUDE_STSCNTRL_STRM == 1)
Status = XAxiDma_BdSetAppWord(BdPtr,
XAXIDMA_LAST_APPWORD, MAX_PKT_LEN);
/* If Set app length failed, it is not fatal
*/
if (Status != XST_SUCCESS) {
xil_printf("Set app word failed with %d\r\n", Status);
}
#endif
/* For single packet, both SOF and EOF are to be set
*/
XAxiDma_BdSetCtrl(BdPtr, XAXIDMA_BD_CTRL_TXEOF_MASK |
XAXIDMA_BD_CTRL_TXSOF_MASK);
XAxiDma_BdSetId(BdPtr, (u32) Packet);
/* Give the BD to DMA to kick off the transmission. */
Status = XAxiDma_BdRingToHw(TxRingPtr, 1, BdPtr);
if (Status != XST_SUCCESS) {
xil_printf("to hw failed %d\r\n", Status);
return XST_FAILURE;
}
return XST_SUCCESS;
}
