_TIMER_TCK1, // 18 J3-10 RA4 SDO1, TCK1 SOSCO/RPA4/T1CK/CTED9/PMA1/RA4
};
/* ------------------------------------------------------------ */
/* This table maps from a digital pin number to the corresponding
** PPS register. This register is used to select the peripheral output
** connected to the pin. The register is set to 0 to disconnedt the
** pin from any peripheral so it can be used as GPIO.
** For PIC32MX1xx/2xx series devices, the PPS output select registers
** are arranged as a contiguous series of 32 bit registers. This table
** treats these registers as an array of DWORDs an stores the index
** to the register.
*/
const uint8_t digital_pin_to_pps_out_PGM[] = {
// Pins 0 through 18
_PPS_OUT(_PPS_RPB5R), // 0 J4-1 RB5 TMS/RPB5/USBID/RB5
_PPS_OUT(_PPS_RPB7R), // 1 J4-2 RB7 TDI/RPB7/CTED3/PMD5/INT0/RB7
_PPS_OUT(_PPS_RPB8R), // 2 J4-3 RB8 TCK/RPB8/SCL1/CTED10/PMD4/RB8
_PPS_OUT(_PPS_RPB9R), // 3 J4-4 RB9 TDO/RPB9/SDA1/CTED4/PMD3/RB9
_PPS_OUT(_PPS_RPB10R), // 4 J4-5 RB10 PGED2/RPB10/D+/CTED11/RB10
_PPS_OUT(_PPS_RPB11R), // 5 J4-6 RB11 PGEC2/RPB11/D-/RB11
_PPS_OUT(_PPS_RPB13R), // 6 J4-7 RB13 AN11/RPB13/CTPLS/PMRD/RB13
_PPS_OUT(_PPS_RPB14R), // 7 J4-8 RB14 CVREF/AN10/C3INB/RPB14/VBUSON/SCK1/CTED5/RB14
_PPS_OUT(_PPS_RPB15R), // 8 J4-9 RB15 AN9/C3INA/RPB15/SCK2/CTED6/PMCS1/RB15
_PPS_OUT(_PPS_RPA0R), // 9 J3-1 RA0 PGED3/VREF+/CVREF+/AN0/C3INC/RPA0/CTED1/PMD7/RA0
_PPS_OUT(_PPS_RPA1R), // 10 J3-2 RA1 PGEC3/VREF-/CVREF-/AN1/RPA1/CTED2/PMD6/RA1
_PPS_OUT(_PPS_RPB0R), // 11 J3-3 RB0 PGED1/AN2/C1IND/C2INB/C3IND/RPB0/PMD0/RB0
_PPS_OUT(_PPS_RPB1R), // 12 J3-4 RB1 PGEC1/AN3/C1INC/C2INA/RPB1/CTED12/PMD1/RB1
_PPS_OUT(_PPS_RPB2R), // 13 J3-5 RB2 AN4/C1INB/C2IND/RPB2/SDA2/CTED13/PMD2/RB2
_PPS_OUT(_PPS_RPB3R), // 14 J3-6 RB3 AN5/C1INA/C2INC/RTCC/RPB3/SCL2/PMWR/RB3
_PPS_OUT(_PPS_RPA2R), // 15 J3-7 RA2 OSC1/CLKI/RPA2/RA2
NOT_ON_TIMER , // 31 RB10
NOT_ON_TIMER , // 32 RB11
};
/* ------------------------------------------------------------ */
/* This table maps from a digital pin number to the corresponding
** PPS register. This register is used to select the peripheral output
** connected to the pin. The register is set to 0 to disconnedt the
** pin from any peripheral so it can be used as GPIO.
** For PIC32MX1xx/2xx series devices, the PPS output select registers
** are arranged as a contiguous series of 32 bit registers. This table
** treats these registers as an array of DWORDs an stores the index
** to the register.
*/
const uint8_t digital_pin_to_pps_out_PGM[] = {
_PPS_OUT(_PPS_RPB13R), // 0 RB13
NOT_PPS_PIN, // 1 RA10
NOT_PPS_PIN, // 2 RA7
_PPS_OUT(_PPS_RPB14R), // 3 RB14
_PPS_OUT(_PPS_RPB15R), // 4 RB15
_PPS_OUT(_PPS_RPA0R), // 5 RA0
_PPS_OUT(_PPS_RPA1R), // 6 RA1
_PPS_OUT(_PPS_RPB0R), // 7 RB0
_PPS_OUT(_PPS_RPB1R), // 8 RB1
_PPS_OUT(_PPS_RPB2R), // 9 RB2
_PPS_OUT(_PPS_RPB3R), // 10 RB3
_PPS_OUT(_PPS_RPC0R), // 11 RC0
_PPS_OUT(_PPS_RPC1R), // 12 RC1
_PPS_OUT(_PPS_RPC2R), // 13 RC2
_PPS_OUT(_PPS_RPA2R), // 14 RA2
_PPS_OUT(_PPS_RPA3R), // 15 RA3
NOT_ON_TIMER, // 19 RB6 PGC
};
/* ------------------------------------------------------------ */
/* This table maps from a digital pin number to the corresponding
** PPS register. This register is used to select the peripheral output
** connected to the pin. The register is set to 0 to disconnect the
** pin from any peripheral so it can be used as GPIO.
** For PIC32MX1xx/2xx series devices, the PPS output select registers
** are arranged as a contiguous series of 32 bit registers. This table
** treats these registers as an array of DWORDs an stores the index
** to the register.
*/
const uint8_t digital_pin_to_pps_out_PGM[] = {
// Click Header
_PPS_OUT(_PPS_RPA0R ), // 0 RA0 AN
NOT_PPS_PIN, // 1 RB12 RES
_PPS_OUT(_PPS_RPB10R), // 2 RB10 CS
_PPS_OUT(_PPS_RPB15R), // 3 RB15 SCK2
_PPS_OUT(_PPS_RPB13R), // 4 RB13 SDI2
_PPS_OUT(_PPS_RPB11R), // 5 RB11 SDO2
_PPS_OUT(_PPS_RPB2R ), // 6 RB9 SDA1
_PPS_OUT(_PPS_RPB3R ), // 7 RB8 SCL1
_PPS_OUT(_PPS_RPC0R ), // 8 RC0 U1TX
_PPS_OUT(_PPS_RPC1R ), // 9 RC1 U1RX
_PPS_OUT(_PPS_RPB7R ), // 10 RB7 INT0
_PPS_OUT(_PPS_RPB8R ), // 11 RB8 PWM (OC2)
// LED & Button
_PPS_OUT(_PPS_RPB9R ), // 12 RB9 Button
_PPS_OUT(_PPS_RPC3R ), // 13 RC3 LED
