/**
* @brief Changes the Audio Out Configuration.
* @param AudioOutOption: specifies the audio out new configuration
* This parameter can be any value of @ref BSP_Audio_Out_Option
* @note This API should be called after the BSP_AUDIO_OUT_Init() to adjust the
* audio out configuration.
* @retval None
*/
void BSP_AUDIO_OUT_ChangeAudioConfig(uint32_t AudioOutOption)
{
/********** Playback Buffer circular/normal mode **********/
if(AudioOutOption & BSP_AUDIO_OUT_CIRCULARMODE)
{
/* Deinitialize the Stream to update DMA mode */
HAL_DMA_DeInit(BSP_AUDIO_hSai.hdmatx);
/* Update the SAI audio Transfer DMA mode */
BSP_AUDIO_hSai.hdmatx->Init.Mode = DMA_CIRCULAR;
/* Configure the DMA Stream with new Transfer DMA mode */
HAL_DMA_Init(BSP_AUDIO_hSai.hdmatx);
}
else /* BSP_AUDIO_OUT_NORMALMODE */
{
/* Deinitialize the Stream to update DMA mode */
HAL_DMA_DeInit(BSP_AUDIO_hSai.hdmatx);
/* Update the SAI audio Transfer DMA mode */
BSP_AUDIO_hSai.hdmatx->Init.Mode = DMA_NORMAL;
/* Configure the DMA Stream with new Transfer DMA mode */
HAL_DMA_Init(BSP_AUDIO_hSai.hdmatx);
}
/********** Playback Buffer stereo/mono mode **********/
if(AudioOutOption & BSP_AUDIO_OUT_STEREOMODE)
{
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
/* Update the SAI audio frame slot configuration */
BSP_AUDIO_hSai.Init.MonoStereoMode = SAI_STEREOMODE;
HAL_SAI_Init(&BSP_AUDIO_hSai);
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
}
else /* BSP_AUDIO_OUT_MONOMODE */
{
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
/* Update the SAI audio frame slot configuration */
BSP_AUDIO_hSai.Init.MonoStereoMode = SAI_MONOMODE;
HAL_SAI_Init(&BSP_AUDIO_hSai);
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
}
}
/**
* @brief Deinitializes SAI MSP.
* @param hsai: SAI handle
* @param Params
* @retval None
*/
__weak void BSP_AUDIO_OUT_MspDeInit(SAI_HandleTypeDef *hsai, void *Params)
{
GPIO_InitTypeDef gpio_init_structure;
/* SAI DMA IRQ Channel deactivation */
HAL_NVIC_DisableIRQ(AUDIO_OUT_SAIx_DMAx_IRQ);
if(hsai->Instance == AUDIO_OUT_SAIx)
{
/* Deinitialize the DMA stream */
HAL_DMA_DeInit(hsai->hdmatx);
}
/* Disable SAI peripheral */
__HAL_SAI_DISABLE(hsai);
/* Deactives CODEC_SAI pins FS, SCK, MCK and SD by putting them in input mode */
gpio_init_structure.Pin = AUDIO_OUT_SAIx_FS_PIN;
HAL_GPIO_DeInit(AUDIO_OUT_SAIx_FS_GPIO_PORT, gpio_init_structure.Pin);
gpio_init_structure.Pin = AUDIO_OUT_SAIx_SCK_PIN;
HAL_GPIO_DeInit(AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT, gpio_init_structure.Pin);
gpio_init_structure.Pin = AUDIO_OUT_SAIx_SD_PIN;
HAL_GPIO_DeInit(AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT, gpio_init_structure.Pin);
gpio_init_structure.Pin = AUDIO_OUT_SAIx_MCLK_PIN;
HAL_GPIO_DeInit(AUDIO_OUT_SAIx_MCLK_GPIO_PORT, gpio_init_structure.Pin);
/* Disable SAI clock */
AUDIO_OUT_SAIx_CLK_DISABLE();
/* GPIO pins clock and DMA clock can be shut down in the application
by surcharging this __weak function */
}
/**
* @brief DeInitializes BSP_AUDIO_IN MSP.
* @param hsai: SAI handle
* @param Params
* @retval None
*/
__weak void BSP_AUDIO_IN_MspDeInit(SAI_HandleTypeDef *hsai, void *Params)
{
GPIO_InitTypeDef gpio_init_structure;
static DMA_HandleTypeDef hdma_sai_rx;
/* SAI IN DMA IRQ Channel deactivation */
HAL_NVIC_DisableIRQ(AUDIO_IN_SAIx_DMAx_IRQ);
if(hsai->Instance == AUDIO_IN_SAIx)
{
/* Deinitialize the Stream for new transfer */
HAL_DMA_DeInit(&hdma_sai_rx);
}
/* Disable SAI block */
__HAL_SAI_DISABLE(hsai);
/* Disable pin: SD pin */
gpio_init_structure.Pin = AUDIO_IN_SAIx_SD_PIN;
HAL_GPIO_DeInit(AUDIO_IN_SAIx_SD_GPIO_PORT, gpio_init_structure.Pin);
/* Disable SAI clock */
AUDIO_IN_SAIx_CLK_DISABLE();
/* GPIO pins clock and DMA clock can be shut down in the application
by surcharging this __weak function */
}
/**
* @brief Deinitializes the output Audio Codec audio interface (SAI).
* @retval None
*/
static void SAIx_Out_DeInit(void)
{
/* Initialize the haudio_out_sai Instance parameter */
haudio_out_sai.Instance = AUDIO_OUT_SAIx;
/* Disable SAI peripheral */
__HAL_SAI_DISABLE(&haudio_out_sai);
HAL_SAI_DeInit(&haudio_out_sai);
}
/**
* @brief Updates the Audio frame slot configuration.
* @param AudioFrameSlot: specifies the audio Frame slot
* This parameter can be one of the following values
* @arg CODEC_AUDIOFRAME_SLOT_0123
* @arg CODEC_AUDIOFRAME_SLOT_02
* @arg CODEC_AUDIOFRAME_SLOT_13
* @note This API should be called after the BSP_AUDIO_OUT_Init() to adjust the
* audio frame slot.
* @retval None
*/
void BSP_AUDIO_OUT_SetAudioFrameSlot(uint32_t AudioFrameSlot)
{
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&haudio_out_sai);
/* Update the SAI audio frame slot configuration */
haudio_out_sai.SlotInit.SlotActive = AudioFrameSlot;
HAL_SAI_Init(&haudio_out_sai);
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&haudio_out_sai);
}
/**
* @brief Updates the audio frequency.
* @param AudioFreq: Audio frequency used to play the audio stream.
* @note This API should be called after the BSP_AUDIO_OUT_Init() to adjust the
* audio frequency.
* @retval None
*/
void BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq)
{
/* PLL clock is set depending by the AudioFreq (44.1khz vs 48khz groups) */
BSP_AUDIO_OUT_ClockConfig(&haudio_out_sai, AudioFreq, NULL);
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&haudio_out_sai);
/* Update the SAI audio frequency configuration */
haudio_out_sai.Init.AudioFrequency = AudioFreq;
HAL_SAI_Init(&haudio_out_sai);
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&haudio_out_sai);
}
/**
* @brief De-initializes the Audio Codec audio interface (SAI).
* @retval BSP AUDIO status
*/
static uint8_t AUDIO_SAIx_DeInit(void)
{
/* Disable the SAI audio block */
__HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
/* De-initializes the SAI peripheral */
if (HAL_SAI_DeInit(&BSP_AUDIO_hSai) != HAL_OK)
{
return AUDIO_ERROR;
}
/* Disable SAIx PLL */
if (AUDIO_SAIx_PLL_DISABLE() != AUDIO_OK)
{
return AUDIO_ERROR;
}
return AUDIO_OK;
}
/**
* @brief Updates the audio frequency.
* @param AudioFreq: Audio frequency used to play the audio stream.
* @note The SAI PLL input clock must be configure in the user application.
* The SAI PLL configuration done within this function assumes that
* the SAI PLL input clock runs at 8 MHz.
* @retval BSP AUDIO status
*/
uint8_t BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq)
{
/* Configure the SAI PLL according to the requested audio frequency */
if (AUDIO_SAIPLLConfig(AudioFreq) != AUDIO_OK)
{
return AUDIO_ERROR;
}
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
/* Update the SAI audio frequency configuration */
BSP_AUDIO_hSai.Init.Mckdiv = SAIClockDivider(AudioFreq);
HAL_SAI_Init(&BSP_AUDIO_hSai);
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
return AUDIO_OK;
}
/**
* @brief Playback initialization
* @param None
* @retval None
*/
static void Playback_Init(void)
{
RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct;
/* Configure PLLSAI prescalers */
/* PLLSAI_VCO: VCO_429M
SAI_CLK(first level) = PLLSAI_VCO/PLLSAIQ = 429/2 = 214.5 Mhz
SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ = 214.5/19 = 11.289 Mhz */
RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SAI2;
RCC_PeriphCLKInitStruct.Sai2ClockSelection = RCC_SAI2CLKSOURCE_PLLSAI;
RCC_PeriphCLKInitStruct.PLLSAI.PLLSAIM = 8;
RCC_PeriphCLKInitStruct.PLLSAI.PLLSAIN = 429;
RCC_PeriphCLKInitStruct.PLLSAI.PLLSAIQ = 2;
RCC_PeriphCLKInitStruct.PLLSAIDivQ = 19;
if(HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct) != HAL_OK)
{
Error_Handler();
}
/* Initialize SAI */
__HAL_SAI_RESET_HANDLE_STATE(&SaiHandle);
SaiHandle.Instance = AUDIO_SAIx;
__HAL_SAI_DISABLE(&SaiHandle);
SaiHandle.Init.AudioMode = SAI_MODEMASTER_TX;
SaiHandle.Init.Synchro = SAI_ASYNCHRONOUS;
SaiHandle.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLE;
SaiHandle.Init.NoDivider = SAI_MASTERDIVIDER_ENABLE;
SaiHandle.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
SaiHandle.Init.ClockSource = SAI_CLKSOURCE_PLLSAI;
SaiHandle.Init.AudioFrequency = SAI_AUDIO_FREQUENCY_22K;
SaiHandle.Init.Protocol = SAI_FREE_PROTOCOL;
SaiHandle.Init.DataSize = SAI_DATASIZE_16;
SaiHandle.Init.FirstBit = SAI_FIRSTBIT_MSB;
SaiHandle.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
SaiHandle.FrameInit.FrameLength = 32;
SaiHandle.FrameInit.ActiveFrameLength = 16;
SaiHandle.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
SaiHandle.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
SaiHandle.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
SaiHandle.SlotInit.FirstBitOffset = 0;
SaiHandle.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
SaiHandle.SlotInit.SlotNumber = 2;
SaiHandle.SlotInit.SlotActive = (SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_1);
if(HAL_OK != HAL_SAI_Init(&SaiHandle))
{
Error_Handler();
}
/* Enable SAI to generate clock used by audio driver */
__HAL_SAI_ENABLE(&SaiHandle);
/* Initialize audio driver */
if(WM8994_ID != wm8994_drv.ReadID(AUDIO_I2C_ADDRESS))
{
Error_Handler();
}
audio_drv = &wm8994_drv;
audio_drv->Reset(AUDIO_I2C_ADDRESS);
if(0 != audio_drv->Init(AUDIO_I2C_ADDRESS, OUTPUT_DEVICE_HEADPHONE, 20, AUDIO_FREQUENCY_22K))
{
Error_Handler();
}
}
/**
* @brief Initializes the Audio Codec audio interface (SAI).
* @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
* @note The default SlotActive configuration is set to CODEC_AUDIOFRAME_SLOT_0123
* and user can update this configuration using
* @retval BSP AUDIO status
*/
static uint8_t AUDIO_SAIx_Init(uint32_t AudioFreq)
{
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&BSP_AUDIO_hSai);
/* Initialize the BSP_AUDIO_hSai Instance parameter */
BSP_AUDIO_hSai.Instance = AUDIO_SAIx;
/* Configure SAI_Block_x
LSBFirst: Disabled
DataSize: 16 */
BSP_AUDIO_hSai.Init.AudioMode = SAI_MODEMASTER_TX;
BSP_AUDIO_hSai.Init.Synchro = SAI_ASYNCHRONOUS;
BSP_AUDIO_hSai.Init.SynchroExt = SAI_SYNCEXT_DISABLE;
BSP_AUDIO_hSai.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLE;
BSP_AUDIO_hSai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLE;
BSP_AUDIO_hSai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
BSP_AUDIO_hSai.Init.AudioFrequency = SAI_AUDIO_FREQUENCY_MCKDIV;
BSP_AUDIO_hSai.Init.Mckdiv = SAIClockDivider(AudioFreq);
BSP_AUDIO_hSai.Init.MonoStereoMode = SAI_STEREOMODE;
BSP_AUDIO_hSai.Init.CompandingMode = SAI_NOCOMPANDING;
BSP_AUDIO_hSai.Init.TriState = SAI_OUTPUT_NOTRELEASED;
BSP_AUDIO_hSai.Init.Protocol = SAI_FREE_PROTOCOL;
BSP_AUDIO_hSai.Init.DataSize = SAI_DATASIZE_16;
BSP_AUDIO_hSai.Init.FirstBit = SAI_FIRSTBIT_MSB;
BSP_AUDIO_hSai.Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE;
/* Configure SAI_Block_x Frame
Frame Length: 32
Frame active Length: 16
FS Definition: Start frame + Channel Side identification
FS Polarity: FS active Low
FS Offset: FS asserted one bit before the first bit of slot 0 */
BSP_AUDIO_hSai.FrameInit.FrameLength = 32;
BSP_AUDIO_hSai.FrameInit.ActiveFrameLength = 16;
BSP_AUDIO_hSai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
BSP_AUDIO_hSai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
BSP_AUDIO_hSai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
/* Configure SAI Block_x Slot
Slot First Bit Offset: 0
Slot Size : 16
Slot Number: 2
Slot Active: Slots 0 and 1 actives */
BSP_AUDIO_hSai.SlotInit.FirstBitOffset = 0;
BSP_AUDIO_hSai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
BSP_AUDIO_hSai.SlotInit.SlotNumber = 2;
BSP_AUDIO_hSai.SlotInit.SlotActive = SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_1;
/* Initializes the SAI peripheral*/
if (HAL_SAI_Init(&BSP_AUDIO_hSai) != HAL_OK)
{
return AUDIO_ERROR;
}
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&BSP_AUDIO_hSai);
return AUDIO_OK;
}
/**
* @brief Initializes the output Audio Codec audio interface (SAI).
* @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
* @note The default SlotActive configuration is set to CODEC_AUDIOFRAME_SLOT_0123
* and user can update this configuration using
* @retval None
*/
static void SAIx_Out_Init(uint32_t AudioFreq)
{
/* Initialize the haudio_out_sai Instance parameter */
haudio_out_sai.Instance = AUDIO_OUT_SAIx;
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&haudio_out_sai);
/* Configure SAI_Block_x
LSBFirst: Disabled
DataSize: 16 */
haudio_out_sai.Init.AudioFrequency = AudioFreq;
haudio_out_sai.Init.AudioMode = SAI_MODEMASTER_TX;
haudio_out_sai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLED;
haudio_out_sai.Init.Protocol = SAI_FREE_PROTOCOL;
#ifdef AUDIO_FORMAT_32BITS
haudio_out_sai.Init.DataSize = SAI_DATASIZE_32;
#else
haudio_out_sai.Init.DataSize = SAI_DATASIZE_16;
#endif
haudio_out_sai.Init.FirstBit = SAI_FIRSTBIT_MSB;
// haudio_out_sai.Init.FirstBit = SAI_FIRSTBIT_LSB;
haudio_out_sai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
haudio_out_sai.Init.Synchro = SAI_ASYNCHRONOUS;
haudio_out_sai.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLED;
haudio_out_sai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
haudio_out_sai.Init.MonoStereoMode=SAI_STEREOMODE;
/* Configure SAI_Block_x Frame
Frame Length: 64
Frame active Length: 32
FS Definition: Start frame + Channel Side identification
FS Polarity: FS active Low
FS Offset: FS asserted one bit before the first bit of slot 0 */
#ifdef AUDIO_FORMAT_32BITS
haudio_out_sai.FrameInit.FrameLength = 64*2;
haudio_out_sai.FrameInit.ActiveFrameLength = 32*2;
#else
haudio_out_sai.FrameInit.FrameLength = 64;
haudio_out_sai.FrameInit.ActiveFrameLength = 32;
#endif
haudio_out_sai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
haudio_out_sai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
haudio_out_sai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
/* Configure SAI Block_x Slot
Slot First Bit Offset: 0
Slot Size : 16
Slot Number: 4
Slot Active: All slot actives */
haudio_out_sai.SlotInit.FirstBitOffset = 0;
#ifdef AUDIO_FORMAT_32BITS
haudio_out_sai.SlotInit.SlotSize = SAI_SLOTSIZE_32B;
#else
haudio_out_sai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
#endif
haudio_out_sai.SlotInit.SlotNumber = 4;
haudio_out_sai.SlotInit.SlotActive = CODEC_AUDIOFRAME_SLOT_0123;
HAL_SAI_Init(&haudio_out_sai);
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&haudio_out_sai);
}
/**
* @brief Initializes the input Audio Codec audio interface (SAI).
* @param SaiOutMode: SAI_MODEMASTER_TX (for record and playback in parallel)
* or SAI_MODEMASTER_RX (for record only).
* @param SlotActive: CODEC_AUDIOFRAME_SLOT_02 or CODEC_AUDIOFRAME_SLOT_13
* @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
* @retval None
*/
static void SAIx_In_Init(uint32_t SaiOutMode, uint32_t SlotActive, uint32_t AudioFreq)
{
/* Initialize SAI2 block A in MASTER RX */
/* Initialize the haudio_out_sai Instance parameter */
haudio_out_sai.Instance = AUDIO_OUT_SAIx;
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&haudio_out_sai);
/* Configure SAI_Block_x
LSBFirst: Disabled
DataSize: 16 */
haudio_out_sai.Init.AudioFrequency = AudioFreq;
haudio_out_sai.Init.AudioMode = SaiOutMode;
haudio_out_sai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLED;
haudio_out_sai.Init.Protocol = SAI_FREE_PROTOCOL;
haudio_out_sai.Init.DataSize = SAI_DATASIZE_16;
haudio_out_sai.Init.FirstBit = SAI_FIRSTBIT_MSB;
haudio_out_sai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
haudio_out_sai.Init.Synchro = SAI_ASYNCHRONOUS;
haudio_out_sai.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLED;
haudio_out_sai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
/* Configure SAI_Block_x Frame
Frame Length: 64
Frame active Length: 32
FS Definition: Start frame + Channel Side identification
FS Polarity: FS active Low
FS Offset: FS asserted one bit before the first bit of slot 0 */
haudio_out_sai.FrameInit.FrameLength = 64;
haudio_out_sai.FrameInit.ActiveFrameLength = 32;
haudio_out_sai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
haudio_out_sai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
haudio_out_sai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
/* Configure SAI Block_x Slot
Slot First Bit Offset: 0
Slot Size : 16
Slot Number: 4
Slot Active: All slot actives */
haudio_out_sai.SlotInit.FirstBitOffset = 0;
haudio_out_sai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
haudio_out_sai.SlotInit.SlotNumber = 4;
haudio_out_sai.SlotInit.SlotActive = SlotActive;
HAL_SAI_Init(&haudio_out_sai);
/* Initialize SAI2 block B in SLAVE RX synchronous from SAI2 block A */
/* Initialize the haudio_in_sai Instance parameter */
haudio_in_sai.Instance = AUDIO_IN_SAIx;
/* Disable SAI peripheral to allow access to SAI internal registers */
__HAL_SAI_DISABLE(&haudio_in_sai);
/* Configure SAI_Block_x
LSBFirst: Disabled
DataSize: 16 */
haudio_in_sai.Init.AudioFrequency = AudioFreq;
haudio_in_sai.Init.AudioMode = SAI_MODESLAVE_RX;
haudio_in_sai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLED;
haudio_in_sai.Init.Protocol = SAI_FREE_PROTOCOL;
haudio_in_sai.Init.DataSize = SAI_DATASIZE_16;
haudio_in_sai.Init.FirstBit = SAI_FIRSTBIT_MSB;
haudio_in_sai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
haudio_in_sai.Init.Synchro = SAI_SYNCHRONOUS;
haudio_in_sai.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLED;
haudio_in_sai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
/* Configure SAI_Block_x Frame
Frame Length: 64
Frame active Length: 32
FS Definition: Start frame + Channel Side identification
FS Polarity: FS active Low
FS Offset: FS asserted one bit before the first bit of slot 0 */
haudio_in_sai.FrameInit.FrameLength = 64;
haudio_in_sai.FrameInit.ActiveFrameLength = 32;
haudio_in_sai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
haudio_in_sai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
haudio_in_sai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
/* Configure SAI Block_x Slot
Slot First Bit Offset: 0
Slot Size : 16
Slot Number: 4
Slot Active: All slot active */
haudio_in_sai.SlotInit.FirstBitOffset = 0;
haudio_in_sai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
haudio_in_sai.SlotInit.SlotNumber = 4;
haudio_in_sai.SlotInit.SlotActive = SlotActive;
HAL_SAI_Init(&haudio_in_sai);
/* Enable SAI peripheral to generate MCLK */
__HAL_SAI_ENABLE(&haudio_out_sai);
/* Enable SAI peripheral */
__HAL_SAI_ENABLE(&haudio_in_sai);
}