C++ (Cpp) __HAL_UART_SEND_REQの例

コード例 #1

ファイル: serial_api.c プロジェクト: kqkq/mbed

void serial_clear(serial_t *obj) {
    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
    __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
    __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
}

コード例 #2

ファイル: stm32f0xx_hal_uart_ex.c プロジェクト: 0xBADCA7/lk

/**
  * @brief Handle UART interrupt request.
  * @param huart: UART handle.
  * @retval None
  */
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
{
  /* UART parity error interrupt occurred -------------------------------------*/
  if((__HAL_UART_GET_IT(huart, UART_IT_PE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE) != RESET))
  {
    __HAL_UART_CLEAR_IT(huart, UART_CLEAR_PEF);

    huart->ErrorCode |= HAL_UART_ERROR_PE;
    /* Set the UART state ready to be able to start again the process */
    huart->State = HAL_UART_STATE_READY;
  }

  /* UART frame error interrupt occurred --------------------------------------*/
  if((__HAL_UART_GET_IT(huart, UART_IT_FE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
  {
    __HAL_UART_CLEAR_IT(huart, UART_CLEAR_FEF);

    huart->ErrorCode |= HAL_UART_ERROR_FE;
    /* Set the UART state ready to be able to start again the process */
    huart->State = HAL_UART_STATE_READY;
  }

  /* UART noise error interrupt occurred --------------------------------------*/
  if((__HAL_UART_GET_IT(huart, UART_IT_NE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
  {
    __HAL_UART_CLEAR_IT(huart, UART_CLEAR_NEF);

    huart->ErrorCode |= HAL_UART_ERROR_NE;
    /* Set the UART state ready to be able to start again the process */
    huart->State = HAL_UART_STATE_READY;
  }

  /* UART Over-Run interrupt occurred -----------------------------------------*/
  if((__HAL_UART_GET_IT(huart, UART_IT_ORE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
  {
    __HAL_UART_CLEAR_IT(huart, UART_CLEAR_OREF);

    huart->ErrorCode |= HAL_UART_ERROR_ORE;
    /* Set the UART state ready to be able to start again the process */
    huart->State = HAL_UART_STATE_READY;
  }

   /* Call UART Error Call back function if need be --------------------------*/
  if(huart->ErrorCode != HAL_UART_ERROR_NONE)
  {
    HAL_UART_ErrorCallback(huart);
  }

#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
  /* UART wakeup from Stop mode interrupt occurred -------------------------------------*/
  if((__HAL_UART_GET_IT(huart, UART_IT_WUF) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_WUF) != RESET))
  {
    __HAL_UART_CLEAR_IT(huart, UART_CLEAR_WUF);
    /* Set the UART state ready to be able to start again the process */
    huart->State = HAL_UART_STATE_READY;
    HAL_UARTEx_WakeupCallback(huart);
  }
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */

  /* UART in mode Receiver ---------------------------------------------------*/
  if((__HAL_UART_GET_IT(huart, UART_IT_RXNE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE) != RESET))
  {
    UART_Receive_IT(huart);
    /* Clear RXNE interrupt flag */
    __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST);
  }


  /* UART in mode Transmitter ------------------------------------------------*/
 if((__HAL_UART_GET_IT(huart, UART_IT_TXE) != RESET) &&(__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE) != RESET))
  {
    UART_Transmit_IT(huart);
  }

  /* UART in mode Transmitter (transmission end) -----------------------------*/
 if((__HAL_UART_GET_IT(huart, UART_IT_TC) != RESET) &&(__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET))
  {
    UART_EndTransmit_IT(huart);
  }

}