コード例 #1
0
ファイル: font.c プロジェクト: XClouded/xielei
int FONT_Init(void)
{
#ifndef HW_RVL
  /* --- Game Cube --- disable Qoob before accessing IPL */
  ipl_set_config(6);
#endif

  /* read IPL font (ASCII) from Mask ROM */
  ipl_fontarea = memalign(32,131360);
  if (!ipl_fontarea)
    return 0;
  memset(ipl_fontarea,0,131360);
  __SYS_ReadROM(ipl_fontarea+119072,12288,0x1FCF00);

  /* YAY0 decompression */
  decode_szp(ipl_fontarea+119072,ipl_fontarea);

	/* retrieve IPL font data */
  fontHeader = (sys_fontheader*)ipl_fontarea;
  fontImage = (u8*)((((u32)ipl_fontarea+fontHeader->sheet_image)+31)&~31);
  
  /* expand to I4 format */
  expand_font((u8*)ipl_fontarea+fontHeader->sheet_image,fontImage);

  /* character width table */
  int i,c;
  for (i=0; i<256; ++i)
  {
    if ((i < fontHeader->first_char) || (i > fontHeader->last_char))
      c = fontHeader->inval_char;
    else
      c = i - fontHeader->first_char;

    font_size[i] = ((u8*)fontHeader)[fontHeader->width_table + c];
  }

  /* font height */
  fheight = fontHeader->cell_height;

  /* initialize texture data */
  fontTexture = memalign(32, fontHeader->cell_width * fontHeader->cell_height / 2);
  if (!fontTexture)
  {
    free(ipl_fontarea);
    return 0;
  }

  return 1;
}
コード例 #2
0
ファイル: main.c プロジェクト: KirovAir/swiss-gc
/* Initialise Video, PAD, DVD, Font */
void* Initialise (void)
{
	VIDEO_Init ();
	PAD_Init ();  
	DVD_Init(); 
	*(volatile unsigned long*)0xcc00643c = 0x00000000; //allow 32mhz exi bus
	
	// Disable IPL modchips to allow access to IPL ROM fonts
	ipl_set_config(6); 
	usleep(1000); //wait for modchip to disable (overkill)
	
	
	__SYS_ReadROM(IPLInfo,256,0);	// Read IPL tag

	// Wii has no IPL tags for "PAL" so let libOGC figure out the video mode
	if(!is_gamecube()) {
		vmode = VIDEO_GetPreferredMode(NULL); //Last mode used
	}
	else {	// Gamecube, determine based on IPL
		int retPAD = 0, retCnt = 10000;
		while(retPAD <= 0 && retCnt >= 0) { retPAD = PAD_ScanPads(); usleep(100); retCnt--; }
		// L Trigger held down ignores the fact that there's a component cable plugged in.
		if(VIDEO_HaveComponentCable() && !(PAD_ButtonsDown(0) & PAD_TRIGGER_L)) {
			if(strstr(IPLInfo,"MPAL")!=NULL) {
				swissSettings.sramVideo = 2;
				vmode = &TVMpal480Prog; //Progressive 480p
			}
			else if((strstr(IPLInfo,"PAL")!=NULL)) {
				swissSettings.sramVideo = 1;
				vmode = &TVPal576ProgScale; //Progressive 576p
			}
			else {
				swissSettings.sramVideo = 0;
				vmode = &TVNtsc480Prog; //Progressive 480p
			}
		}
		else {
			//try to use the IPL region
			if(strstr(IPLInfo,"MPAL")!=NULL) {
				swissSettings.sramVideo = 2;
				vmode = &TVMpal480IntDf;        //PAL-M
			}
			else if(strstr(IPLInfo,"PAL")!=NULL) {
				swissSettings.sramVideo = 1;
				vmode = &TVPal576IntDfScale;         //PAL
			}
			else {
				swissSettings.sramVideo = 0;
				vmode = &TVNtsc480IntDf;        //NTSC
			}
		}
	}
	initialise_video(vmode);
	populateVideoStr(vmode);

	init_font();
	init_textures();
	whichfb = 0;
	
	drive_version(&driveVersion[0]);
	swissSettings.hasDVDDrive = *(u32*)&driveVersion[0] ? 1 : 0;
	
	if(!driveVersion[0]) {
		// Reset DVD if there was a modchip
		DrawFrameStart();
		WriteFontStyled(640/2, 250, "Initialise DVD .. (HOLD B if NO DVD Drive)", 0.8f, true, defaultColor);
		DrawFrameFinish();
		dvd_reset();	// low-level, basic
		dvd_read_id();
		if(!(PAD_ButtonsHeld(0) & PAD_BUTTON_B)) {
			dvd_set_streaming(*(char*)0x80000008);
		}
		drive_version(&driveVersion[0]);
		swissSettings.hasDVDDrive = *(u32*)&driveVersion[0] ? 1 : 0;
		if(!swissSettings.hasDVDDrive) {
			DrawFrameStart();
			DrawMessageBox(D_INFO, "No DVD Drive Detected !!");
			DrawFrameFinish();
			sleep(2);
		}
	}
	
	return xfb[0];
}
コード例 #3
0
ファイル: main.c プロジェクト: volt72/Nintendont
int main(int argc, char **argv)
{
	// Exit after 10 seconds if there is an error
	__exception_setreload(10);
//	u64 timeout = 0;
	CheckForGecko();
	DCInvalidateRange(loader_stub, 0x1800);
	memcpy(loader_stub, (void*)0x80001800, 0x1800);

	RAMInit();

	//Meh, doesnt do anything anymore anyways
	//STM_RegisterEventHandler(HandleSTMEvent);

	Initialise();

	// Checking for storage devices...
	ShowMessageScreen("Checking storage devices...");

	u32 u;
	//Disables MEMPROT for patches
	write16(MEM_PROT, 0);
	//Patches FS access
	for( u = 0x93A00000; u < 0x94000000; u+=2 )
	{
		if( memcmp( (void*)(u), FSAccessPattern, sizeof(FSAccessPattern) ) == 0 )
		{
		//	gprintf("FSAccessPatch:%08X\r\n", u );
			memcpy( (void*)u, FSAccessPatch, sizeof(FSAccessPatch) );
			DCFlushRange((void*)u, sizeof(FSAccessPatch));
			break;
		}
	}

	//for BT.c
	CONF_GetPadDevices((conf_pads*)0x932C0000);
	DCFlushRange((void*)0x932C0000, sizeof(conf_pads));
	*(vu32*)0x932C0490 = CONF_GetIRSensitivity();
	*(vu32*)0x932C0494 = CONF_GetSensorBarPosition();
	DCFlushRange((void*)0x932C0490, 8);

	if(LoadKernel() < 0)
	{
		ClearScreen();
		gprintf("Failed to load kernel from NAND!\r\n");
		ShowMessageScreenAndExit("Failed to load kernel from NAND!", 1);
	}
	InsertModule((char*)kernel_bin, kernel_bin_size);

	memset( (void*)0x92f00000, 0, 0x100000 );
	DCFlushRange( (void*)0x92f00000, 0x100000 );

	DCInvalidateRange( (void*)0x939F02F0, 0x20 );

	memcpy( (void*)0x939F02F0, Boot2Patch, sizeof(Boot2Patch) );

	DCFlushRange( (void*)0x939F02F0, 0x20 );

	//libogc still has that, lets close it
	__ES_Close();
	s32 fd = IOS_Open( "/dev/es", 0 );

	memset( STATUS, 0xFFFFFFFF, 0x20  );
	DCFlushRange( STATUS, 0x20 );

	memset( (void*)0x91000000, 0xFFFFFFFF, 0x20  );
	DCFlushRange( (void*)0x91000000, 0x20 );

	*(vu32*)0xD3003420 = 0; //make sure kernel doesnt reload

	raw_irq_handler_t irq_handler = BeforeIOSReload();
	IOS_IoctlvAsync( fd, 0x1F, 0, 0, &IOCTL_Buf, NULL, NULL );
	AfterIOSReload( irq_handler, FoundVersion );

	while(1)
	{
		DCInvalidateRange( STATUS, 0x20 );
		if((STATUS_LOADING > 0 || abs(STATUS_LOADING) > 1) && STATUS_LOADING < 20)
		{
			gprintf("Kernel sent signal\n");
			break;
		}
	}

	/* For slow USB HDDs */
	time_t timeout = time(NULL);
	while(time(NULL) - timeout < 10)
	{
		if(__io_custom_usbstorage.startup() && __io_custom_usbstorage.isInserted())
			break;
		usleep(50000);
	}
	fatInitDefault();

	gprintf("Nintendont at your service!\r\n%s\r\n", NIN_BUILD_STRING);
	KernelLoaded = 1;

	char* first_slash = strrchr(argv[0], '/');
	if (first_slash != NULL) strncpy(launch_dir, argv[0], first_slash-argv[0]+1);
	gprintf("launch_dir = %s\r\n", launch_dir);

	FPAD_Init();
	FPAD_Update();

	/* Read IPL Font before doing any patches */
	void *fontbuffer = memalign(32, 0x50000);
	__SYS_ReadROM((void*)fontbuffer,0x50000,0x1AFF00);
	memcpy((void*)0xD3100000, fontbuffer, 0x50000);
	DCInvalidateRange( (void*)0x93100000, 0x50000 );
	free(fontbuffer);
	//gprintf("Font: 0x1AFF00 starts with %.4s, 0x1FCF00 with %.4s\n", (char*)0x93100000, (char*)0x93100000 + 0x4D000);

	// Simple code to autoupdate the meta.xml in Nintendont's folder
	FILE *meta = fopen("meta.xml", "w");
	if(meta != NULL)
	{
		fprintf(meta, "%s\r\n<app version=\"1\">\r\n\t<name>%s</name>\r\n", META_XML, META_NAME);
		fprintf(meta, "\t<coder>%s</coder>\r\n\t<version>%d.%d</version>\r\n", META_AUTHOR, NIN_VERSION>>16, NIN_VERSION&0xFFFF);
		fprintf(meta, "\t<release_date>20150531000000</release_date>\r\n");
		fprintf(meta, "\t<short_description>%s</short_description>\r\n", META_SHORT);
		fprintf(meta, "\t<long_description>%s\r\n\r\n%s</long_description>\r\n", META_LONG1, META_LONG2);
		fprintf(meta, "\t<ahb_access/>\r\n</app>");
		fclose(meta);
	}
コード例 #4
0
ファイル: main.c プロジェクト: emukidid/swiss-gc
/* Initialise Video, PAD, DVD, Font */
void Initialise (void)
{
	VIDEO_Init ();
	PAD_Init ();  
	DVD_Init(); 
	*(volatile unsigned long*)0xcc00643c = 0x00000000; //allow 32mhz exi bus
	
	// Disable IPL modchips to allow access to IPL ROM fonts
	ipl_set_config(6); 
	usleep(1000); //wait for modchip to disable (overkill)
	
	
	__SYS_ReadROM(IPLInfo,256,0);	// Read IPL tag

	// By default, let libOGC figure out the video mode
	GXRModeObj *vmode = VIDEO_GetPreferredMode(NULL); //Last mode used
	if(is_gamecube()) {	// Gamecube, determine based on IPL
		int retPAD = 0, retCnt = 10000;
		while(retPAD <= 0 && retCnt >= 0) { retPAD = PAD_ScanPads(); usleep(100); retCnt--; }
		// L Trigger held down ignores the fact that there's a component cable plugged in.
		if(VIDEO_HaveComponentCable() && !(PAD_ButtonsDown(0) & PAD_TRIGGER_L)) {
			if(strstr(IPLInfo,"MPAL")!=NULL) {
				swissSettings.sramVideo = 2;
				vmode = &TVMpal480Prog; //Progressive 480p
			}
			else if((strstr(IPLInfo,"PAL")!=NULL)) {
				swissSettings.sramVideo = 1;
				vmode = &TVPal576ProgScale; //Progressive 576p
			}
			else {
				swissSettings.sramVideo = 0;
				vmode = &TVNtsc480Prog; //Progressive 480p
			}
		}
		else {
			//try to use the IPL region
			if(strstr(IPLInfo,"MPAL")!=NULL) {
				swissSettings.sramVideo = 2;
				vmode = &TVMpal480IntDf;        //PAL-M
			}
			else if(strstr(IPLInfo,"PAL")!=NULL) {
				swissSettings.sramVideo = 1;
				vmode = &TVPal576IntDfScale;         //PAL
			}
			else {
				swissSettings.sramVideo = 0;
				vmode = &TVNtsc480IntDf;        //NTSC
			}
		}
	}
	setVideoMode(vmode);

	init_font();
	DrawInit();
	
	drive_version(&driveVersion[0]);
	swissSettings.hasDVDDrive = *(u32*)&driveVersion[0] ? 1 : 0;
	
	if(!driveVersion[0]) {
		// Reset DVD if there was a IPL replacement that hasn't done that for us yet
		uiDrawObj_t *progBox = DrawPublish(DrawProgressBar(true, 0, "Initialise DVD .. (HOLD B if NO DVD Drive)"));
		dvd_reset();	// low-level, basic
		dvd_read_id();
		if(!(PAD_ButtonsHeld(0) & PAD_BUTTON_B)) {
			dvd_set_streaming(*(char*)0x80000008);
		}
		drive_version(&driveVersion[0]);
		swissSettings.hasDVDDrive = *(u32*)&driveVersion[0] ? 2 : 0;
		if(!swissSettings.hasDVDDrive) {
			DrawDispose(progBox);
			progBox = DrawPublish(DrawMessageBox(D_INFO, "No DVD Drive Detected !!"));
			sleep(2);
		}
		DrawDispose(progBox);
	}
}