int main()
{
int fd1;
fd1 = creat("file1", S_IREAD|S_IWRITE);
close (fd1);
fd1 = creat("file3", S_IREAD|S_IWRITE);
close (fd1);
mkdir("dir1", S_IREAD|S_IWRITE|S_IEXEC);
mkdir("dir3", S_IREAD|S_IWRITE|S_IEXEC);
mkdir("dir5", S_IREAD|S_IWRITE|S_IEXEC);
fd1 = creat("dir3/file", S_IREAD|S_IWRITE);
close (fd1);
rename("file1", "file2");
//staptest// [[[[rename ("file1", "file2"!!!!renameat (AT_FDCWD, "file1", AT_FDCWD, "file2"]]]]) = 0
rename("dir1", "dir2");
//staptest// [[[[rename ("dir1", "dir2"!!!!renameat (AT_FDCWD, "dir1", AT_FDCWD, "dir2"]]]]) = 0
// This will fail since the target isn't empty.
rename("dir2", "dir3");
//staptest// [[[[rename ("dir2", "dir3"!!!!renameat (AT_FDCWD, "dir2", AT_FDCWD, "dir3"]]]]) = -NNNN (ENOTEMPTY!!!!EEXIST)
// This will fail since you can't rename a file to a directory.
rename("file2", "dir2");
//staptest// [[[[rename ("file2", "dir2"!!!!renameat (AT_FDCWD, "file2", AT_FDCWD, "dir2"]]]]) = -NNNN (EISDIR)
// You can't rename a directory to a subdirectory of itself.
rename("dir2", "dir2/dir4");
//staptest// [[[[rename ("dir2", "dir2/dir4"!!!!renameat (AT_FDCWD, "dir2", AT_FDCWD, "dir2/dir4"]]]]) = -NNNN (EINVAL)
// You can't rename a directory to a file.
rename("dir2", "file2");
//staptest// [[[[rename ("dir2", "file2"!!!!renameat (AT_FDCWD, "dir2", AT_FDCWD, "file2"]]]]) = -NNNN (ENOTDIR)
rename("file2", (char *)-1);
#ifdef __s390__
//staptest// rename ("file2", 0x[7]?[f]+) = -NNNN (EFAULT)
#else
//staptest// [[[[rename ("file2", 0x[f]+!!!!renameat (AT_FDCWD, "file2", AT_FDCWD, 0x[f]+]]]]) = -NNNN (EFAULT)
#endif
rename((char *)-1, "file2");
#ifdef __s390__
//staptest// rename (0x[7]?[f]+, "file2") = -NNNN (EFAULT)
#else
//staptest// [[[[rename (0x[f]+, "file2"!!!!renameat (AT_FDCWD, 0x[f]+, AT_FDCWD, "file2"]]]]) = -NNNN (EFAULT)
#endif
#if GLIBC_SUPPORT
renameat(AT_FDCWD, "file2", AT_FDCWD, "file1");
//staptest// renameat (AT_FDCWD, "file2", AT_FDCWD, "file1") = 0
renameat(AT_FDCWD, "dir2", AT_FDCWD, "dir1");
//staptest// renameat (AT_FDCWD, "dir2", AT_FDCWD, "dir1") = 0
// This will fail since the target isn't empty.
renameat(AT_FDCWD, "dir1", AT_FDCWD, "dir3");
//staptest// renameat (AT_FDCWD, "dir1", AT_FDCWD, "dir3") = -NNNN (ENOTEMPTY!!!!EEXIST)
// This will fail since you can't rename a file to a directory.
renameat(AT_FDCWD, "file1", AT_FDCWD, "dir1");
//staptest// renameat (AT_FDCWD, "file1", AT_FDCWD, "dir1") = -NNNN (EISDIR)
// You can't rename a directory to a subdirectory of itself.
renameat(AT_FDCWD, "dir1", AT_FDCWD, "dir1/dir4");
//staptest// renameat (AT_FDCWD, "dir1", AT_FDCWD, "dir1/dir4") = -NNNN (EINVAL)
// You can't rename a directory to a file.
renameat(AT_FDCWD, "dir1", AT_FDCWD, "file1");
//staptest// renameat (AT_FDCWD, "dir1", AT_FDCWD, "file1") = -NNNN (ENOTDIR)
renameat(-1, "dir1", AT_FDCWD, "file1");
//staptest// renameat (-1, "dir1", AT_FDCWD, "file1") = -NNNN
renameat(AT_FDCWD, (char *)-1, AT_FDCWD, "file1");
#ifdef __s390__
//staptest// renameat (AT_FDCWD, 0x[7]?[f]+, AT_FDCWD, "file1") = -NNNN
#else
//staptest// renameat (AT_FDCWD, 0x[f]+, AT_FDCWD, "file1") = -NNNN
#endif
renameat(AT_FDCWD, "dir1", -1, "file1");
//staptest// renameat (AT_FDCWD, "dir1", -1, "file1") = -NNNN
renameat(AT_FDCWD, "file1", AT_FDCWD, (char *)-1);
#ifdef __s390__
//staptest// renameat (AT_FDCWD, "file1", AT_FDCWD, 0x[7]?[f]+) = -NNNN (EFAULT)
#else
//staptest// renameat (AT_FDCWD, "file1", AT_FDCWD, 0x[f]+) = -NNNN (EFAULT)
#endif
#endif
#if defined(SYS_renameat2)
// the renameat2 syscall is not implemented on ppc64le (kernel-3.10.0-294).
// arch/powerpc/include/asm/systbl.h has 'SYSCALL(ni_syscall) /* sys_renameat2 */'
__renameat2(AT_FDCWD, "file3", AT_FDCWD, "file4", 0);
//staptest// [[[[renameat2 (AT_FDCWD, "file3", AT_FDCWD, "file4", 0x0) = 0!!!!ni_syscall () = -NNNN]]]]
__renameat2(AT_FDCWD, "dir5", AT_FDCWD, "dir6", 0);
//staptest// [[[[renameat2 (AT_FDCWD, "dir5", AT_FDCWD, "dir6", 0x0) = 0!!!!ni_syscall () = -NNNN]]]]
// This should fail since the target exists (when using RENAME_NOREPLACE).
#ifdef RENAME_NOREPLACE
__renameat2(AT_FDCWD, "file4", AT_FDCWD, "file2", RENAME_NOREPLACE);
//staptest// [[[[renameat2 (AT_FDCWD, "file4", AT_FDCWD, "file2", RENAME_NOREPLACE)!!!!ni_syscall ()]]]] = NNNN
#endif
// This will fail since the target isn't empty.
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "dir3", 0);
//staptest// [[[[renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "dir3", 0x0)!!!!ni_syscall ()]]]] = -NNNN (ENOTEMPTY!!!!EEXIST!!!!ENOSYS)
// This will fail since you can't rename a file to a directory.
__renameat2(AT_FDCWD, "file4", AT_FDCWD, "dir6", 0);
//staptest// [[[[renameat2 (AT_FDCWD, "file4", AT_FDCWD, "dir6", 0x0)!!!!ni_syscall ()]]]] = -NNNN (EISDIR!!!!ENOENT!!!!ENOSYS)
// Normally, this would fail since you can't rename a file to a
// directory. But with RENAME_EXCHANGE, the kernel will atomically
// exchange them. Note that since NFS filesystem's don't support
// RENAME_EXCHANGE, this call can fail.
#ifdef RENAME_EXCHANGE
__renameat2(AT_FDCWD, "file2", AT_FDCWD, "dir1", RENAME_EXCHANGE);
//staptest// [[[[renameat2 (AT_FDCWD, "file2", AT_FDCWD, "dir1", RENAME_EXCHANGE) = NNNN!!!!ni_syscall () = -NNNN]]]]
#endif
// You can't rename a directory to a subdirectory of itself.
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "dir6/dir4", 0);
//staptest// [[[[renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "dir6/dir4", 0x0)!!!!ni_syscall ()]]]] = -NNNN (EINVAL!!!!ENOSYS)
// You can't rename a directory to a file without RENAME_EXCHANGE.
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "file4", 0);
#ifdef RENAME_EXCHANGE
//staptest// [[[[renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "file4", 0x0)!!!!ni_syscall ()]]]] = NNNN
#else
//staptest// [[[[renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "file4", 0x0)!!!!ni_syscall ()]]]] = -NNNN (ENOTDIR!!!!ENOSYS)
#endif
__renameat2(-1, "dir6", AT_FDCWD, "file4", 0);
//staptest// [[[[renameat2 (-1, "dir6", AT_FDCWD, "file4", 0x0)!!!!ni_syscall ()]]]] = -NNNN
__renameat2(AT_FDCWD, (char *)-1, AT_FDCWD, "file4", 0);
#ifdef __s390__
//staptest// renameat2 (AT_FDCWD, 0x[7]?[f]+, AT_FDCWD, "file4", 0x0) = -NNNN
#else
//staptest// [[[[renameat2 (AT_FDCWD, 0x[f]+, AT_FDCWD, "file4", 0x0)!!!!ni_syscall ()]]]] = -NNNN
#endif
__renameat2(AT_FDCWD, "dir6", -1, "file4", 0);
//staptest// [[[[renameat2 (AT_FDCWD, "dir6", -1, "file4", 0x0)!!!!ni_syscall ()]]]] = -NNNN
__renameat2(AT_FDCWD, "file4", AT_FDCWD, (char *)-1, 0);
#ifdef __s390__
//staptest// renameat2 (AT_FDCWD, "file4", AT_FDCWD, 0x[7]?[f]+, 0x0) = -NNNN (EFAULT)
#else
//staptest// [[[[renameat2 (AT_FDCWD, "file4", AT_FDCWD, 0x[f]+, 0x0)!!!!ni_syscall ()]]]] = -NNNN (EFAULT!!!!ENOSYS)
#endif
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "file4", -1);
//staptest// [[[[renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "file4", RENAME_[^ ]+|XXXX)!!!!ni_syscall ()]]]] = -NNNN
#endif
return 0;
}
int main()
{
int fd1;
fd1 = creat("file1", S_IREAD|S_IWRITE);
close (fd1);
fd1 = creat("file3", S_IREAD|S_IWRITE);
close (fd1);
mkdir("dir1", S_IREAD|S_IWRITE|S_IEXEC);
mkdir("dir3", S_IREAD|S_IWRITE|S_IEXEC);
mkdir("dir5", S_IREAD|S_IWRITE|S_IEXEC);
fd1 = creat("dir3/file", S_IREAD|S_IWRITE);
close (fd1);
rename("file1", "file2");
//staptest// [[[[rename ("file1", "file2"!!!!renameat (AT_FDCWD, "file1", AT_FDCWD, "file2"]]]]) = 0
rename("dir1", "dir2");
//staptest// [[[[rename ("dir1", "dir2"!!!!renameat (AT_FDCWD, "dir1", AT_FDCWD, "dir2"]]]]) = 0
// This will fail since the target isn't empty.
rename("dir2", "dir3");
//staptest// [[[[rename ("dir2", "dir3"!!!!renameat (AT_FDCWD, "dir2", AT_FDCWD, "dir3"]]]]) = -NNNN (ENOTEMPTY!!!!EEXIST)
// This will fail since you can't rename a file to a directory.
rename("file2", "dir2");
//staptest// [[[[rename ("file2", "dir2"!!!!renameat (AT_FDCWD, "file2", AT_FDCWD, "dir2"]]]]) = -NNNN (EISDIR)
// You can't rename a directory to a subdirectory of itself.
rename("dir2", "dir2/dir4");
//staptest// [[[[rename ("dir2", "dir2/dir4"!!!!renameat (AT_FDCWD, "dir2", AT_FDCWD, "dir2/dir4"]]]]) = -NNNN (EINVAL)
// You can't rename a directory to a file.
rename("dir2", "file2");
//staptest// [[[[rename ("dir2", "file2"!!!!renameat (AT_FDCWD, "dir2", AT_FDCWD, "file2"]]]]) = -NNNN (ENOTDIR)
rename("file2", (char *)-1);
#ifdef __s390__
//staptest// rename ("file2", [7]?[f]+) = -NNNN (EFAULT)
#else
//staptest// [[[[rename ("file2", [f]+!!!!renameat (AT_FDCWD, "file2", AT_FDCWD, [f]+]]]]) = -NNNN (EFAULT)
#endif
rename((char *)-1, "file2");
#ifdef __s390__
//staptest// rename ([7]?[f]+, "file2") = -NNNN (EFAULT)
#else
//staptest// [[[[rename ([f]+, "file2"!!!!renameat (AT_FDCWD, [f]+, AT_FDCWD, "file2"]]]]) = -NNNN (EFAULT)
#endif
#if GLIBC_SUPPORT
renameat(AT_FDCWD, "file2", AT_FDCWD, "file1");
//staptest// renameat (AT_FDCWD, "file2", AT_FDCWD, "file1") = 0
renameat(AT_FDCWD, "dir2", AT_FDCWD, "dir1");
//staptest// renameat (AT_FDCWD, "dir2", AT_FDCWD, "dir1") = 0
// This will fail since the target isn't empty.
renameat(AT_FDCWD, "dir1", AT_FDCWD, "dir3");
//staptest// renameat (AT_FDCWD, "dir1", AT_FDCWD, "dir3") = -NNNN (ENOTEMPTY!!!!EEXIST)
// This will fail since you can't rename a file to a directory.
renameat(AT_FDCWD, "file1", AT_FDCWD, "dir1");
//staptest// renameat (AT_FDCWD, "file1", AT_FDCWD, "dir1") = -NNNN (EISDIR)
// You can't rename a directory to a subdirectory of itself.
renameat(AT_FDCWD, "dir1", AT_FDCWD, "dir1/dir4");
//staptest// renameat (AT_FDCWD, "dir1", AT_FDCWD, "dir1/dir4") = -NNNN (EINVAL)
// You can't rename a directory to a file.
renameat(AT_FDCWD, "dir1", AT_FDCWD, "file1");
//staptest// renameat (AT_FDCWD, "dir1", AT_FDCWD, "file1") = -NNNN (ENOTDIR)
renameat(-1, "dir1", AT_FDCWD, "file1");
//staptest// renameat (-1, "dir1", AT_FDCWD, "file1") = -NNNN
renameat(AT_FDCWD, (char *)-1, AT_FDCWD, "file1");
#ifdef __s390__
//staptest// renameat (AT_FDCWD, [7]?[f]+, AT_FDCWD, "file1") = -NNNN
#else
//staptest// renameat (AT_FDCWD, [f]+, AT_FDCWD, "file1") = -NNNN
#endif
renameat(AT_FDCWD, "dir1", -1, "file1");
//staptest// renameat (AT_FDCWD, "dir1", -1, "file1") = -NNNN
renameat(AT_FDCWD, "file1", AT_FDCWD, (char *)-1);
#ifdef __s390__
//staptest// renameat (AT_FDCWD, "file1", AT_FDCWD, [7]?[f]+) = -NNNN (EFAULT)
#else
//staptest// renameat (AT_FDCWD, "file1", AT_FDCWD, [f]+) = -NNNN (EFAULT)
#endif
#endif
#if defined(SYS_renameat2)
__renameat2(AT_FDCWD, "file3", AT_FDCWD, "file4", 0);
//staptest// renameat2 (AT_FDCWD, "file3", AT_FDCWD, "file4", 0x0) = 0
__renameat2(AT_FDCWD, "dir5", AT_FDCWD, "dir6", 0);
//staptest// renameat2 (AT_FDCWD, "dir5", AT_FDCWD, "dir6", 0x0) = 0
// This should fail since the target exists (when using RENAME_NOREPLACE).
#ifdef RENAME_NOREPLACE
__renameat2(AT_FDCWD, "file4", AT_FDCWD, "file2", RENAME_NOREPLACE);
//staptest// renameat2 (AT_FDCWD, "file4", AT_FDCWD, "file2", RENAME_NOREPLACE) = -NNNN
#endif
// This will fail since the target isn't empty.
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "dir3", 0);
//staptest// renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "dir3", 0x0) = -NNNN (ENOTEMPTY!!!!EEXIST)
// This will fail since you can't rename a file to a directory.
__renameat2(AT_FDCWD, "file4", AT_FDCWD, "dir6", 0);
//staptest// renameat2 (AT_FDCWD, "file4", AT_FDCWD, "dir6", 0x0) = -NNNN (EISDIR)
// Normally, this would fail since you can't rename a file to a
// directory. But with RENAME_EXCHANGE, the kernel will atomically
// exchange them. Note that since NFS filesystem's don't support
// RENAME_EXCHANGE, this call can fail.
#ifdef RENAME_EXCHANGE
__renameat2(AT_FDCWD, "file2", AT_FDCWD, "dir1", RENAME_EXCHANGE);
//staptest// renameat2 (AT_FDCWD, "file2", AT_FDCWD, "dir1", RENAME_EXCHANGE) = NNNN
#endif
// You can't rename a directory to a subdirectory of itself.
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "dir6/dir4", 0);
//staptest// renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "dir6/dir4", 0x0) = -NNNN (EINVAL)
// You can't rename a directory to a file.
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "file4", 0);
//staptest// renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "file4", 0x0) = -NNNN (ENOTDIR)
__renameat2(-1, "dir6", AT_FDCWD, "file4", 0);
//staptest// renameat2 (-1, "dir6", AT_FDCWD, "file4", 0x0) = -NNNN
__renameat2(AT_FDCWD, (char *)-1, AT_FDCWD, "file4", 0);
#ifdef __s390__
//staptest// renameat2 (AT_FDCWD, [7]?[f]+, AT_FDCWD, "file4", 0x0) = -NNNN
#else
//staptest// renameat2 (AT_FDCWD, [f]+, AT_FDCWD, "file4", 0x0) = -NNNN
#endif
__renameat2(AT_FDCWD, "dir6", -1, "file4", 0);
//staptest// renameat2 (AT_FDCWD, "dir6", -1, "file4", 0x0) = -NNNN
__renameat2(AT_FDCWD, "file4", AT_FDCWD, (char *)-1, 0);
#ifdef __s390__
//staptest// renameat2 (AT_FDCWD, "file4", AT_FDCWD, [7]?[f]+, 0x0) = -NNNN (EFAULT)
#else
//staptest// renameat2 (AT_FDCWD, "file4", AT_FDCWD, [f]+, 0x0) = -NNNN (EFAULT)
#endif
__renameat2(AT_FDCWD, "dir6", AT_FDCWD, "file4", -1);
//staptest// renameat2 (AT_FDCWD, "dir6", AT_FDCWD, "file4", RENAME_[^ ]+|XXXX) = -NNNN
#endif
return 0;
}