int
pthread_sigmask (int how, const sigset_t *newmask, sigset_t *oldmask)
{
sigset_t local_newmask;
/* The only thing we have to make sure here is that SIGCANCEL and
SIGSETXID is not blocked. */
if (newmask != NULL
&& (__builtin_expect (__sigismember (newmask, SIGCANCEL), 0)
|| __builtin_expect (__sigismember (newmask, SIGSETXID), 0)))
{
local_newmask = *newmask;
__sigdelset (&local_newmask, SIGCANCEL);
__sigdelset (&local_newmask, SIGSETXID);
newmask = &local_newmask;
}
#ifdef INTERNAL_SYSCALL
/* We know that realtime signals are available if NPTL is used. */
INTERNAL_SYSCALL_DECL (err);
int result = INTERNAL_SYSCALL (rt_sigprocmask, err, 4, how, newmask,
oldmask, _NSIG / 8);
return (INTERNAL_SYSCALL_ERROR_P (result, err)
? INTERNAL_SYSCALL_ERRNO (result, err)
: 0);
#else
return sigprocmask (how, newmask, oldmask) == -1 ? errno : 0;
#endif
}
int sigprocmask(int how, const sigset_t * set, sigset_t * oldset)
{
#ifdef SIGCANCEL
sigset_t local_newmask;
/*
* The only thing we have to make sure here is that SIGCANCEL and
* SIGSETXID are not blocked.
*/
if (set != NULL && (__builtin_expect (__sigismember (set, SIGCANCEL), 0)
# ifdef SIGSETXID
|| __builtin_expect (__sigismember (set, SIGSETXID), 0)
# endif
))
{
local_newmask = *set;
__sigdelset (&local_newmask, SIGCANCEL);
# ifdef SIGSETXID
__sigdelset (&local_newmask, SIGSETXID);
# endif
set = &local_newmask;
}
#endif
return (__syscall_sigprocmask(how, set, oldset));
}
/* Return any pending signal or wait for one for the given time. */
static int
do_sigwait (const sigset_t *set, int *sig)
{
int ret;
#ifdef SIGCANCEL
sigset_t tmpset;
if (set != NULL
&& (__builtin_expect (__sigismember (set, SIGCANCEL), 0)
# ifdef SIGSETXID
|| __builtin_expect (__sigismember (set, SIGSETXID), 0)
# endif
))
{
/* Create a temporary mask without the bit for SIGCANCEL set. */
// We are not copying more than we have to.
memcpy (&tmpset, set, _NSIG / 8);
__sigdelset (&tmpset, SIGCANCEL);
# ifdef SIGSETXID
__sigdelset (&tmpset, SIGSETXID);
# endif
set = &tmpset;
}
#endif
/* XXX The size argument hopefully will have to be changed to the
real size of the user-level sigset_t. */
#ifdef INTERNAL_SYSCALL
INTERNAL_SYSCALL_DECL (err);
do
ret = INTERNAL_SYSCALL (rt_sigtimedwait, err, 4, set,
NULL, NULL, _NSIG / 8);
while (INTERNAL_SYSCALL_ERROR_P (ret, err)
&& INTERNAL_SYSCALL_ERRNO (ret, err) == EINTR);
if (! INTERNAL_SYSCALL_ERROR_P (ret, err))
{
*sig = ret;
ret = 0;
}
else
ret = INTERNAL_SYSCALL_ERRNO (ret, err);
#else
do
ret = INLINE_SYSCALL (rt_sigtimedwait, 4, set, NULL, NULL, _NSIG / 8);
while (ret == -1 && errno == EINTR);
if (ret != -1)
{
*sig = ret;
ret = 0;
}
else
ret = errno;
#endif
return ret;
}
/* Clear a pending signal and return the associated detailed
signal information. SS must be locked, and must have signal SIGNO
pending, either directly or through the global sigstate. */
static struct hurd_signal_detail
sigstate_clear_pending (struct hurd_sigstate *ss, int signo)
{
if (sigstate_is_global_rcv (ss)
&& __sigismember (&_hurd_global_sigstate->pending, signo))
{
__sigdelset (&_hurd_global_sigstate->pending, signo);
return _hurd_global_sigstate->pending_data[signo];
}
assert (__sigismember (&ss->pending, signo));
__sigdelset (&ss->pending, signo);
return ss->pending_data[signo];
}
static int __NC(sigwait)(const sigset_t *set, int *sig)
{
sigset_t tmp_mask;
struct sigaction saved[NSIG];
struct sigaction action;
int save_errno;
int this;
/* Prepare set. */
__sigfillset (&tmp_mask);
/* Unblock all signals in the SET and register our nice handler. */
action.sa_handler = ignore_signal;
action.sa_flags = 0;
__sigfillset (&action.sa_mask); /* Block all signals for handler. */
/* Make sure we recognize error conditions by setting WAS_SIG to a
value which does not describe a legal signal number. */
was_sig = -1;
for (this = 1; this < NSIG; ++this)
if (__sigismember (set, this))
{
/* Unblock this signal. */
__sigdelset (&tmp_mask, this);
/* Register temporary action handler. */
/* In Linux (as of 2.6.25), fails only if sig is SIGKILL or SIGSTOP */
/* (so, will it work correctly if set has, say, SIGSTOP?) */
if (sigaction (this, &action, &saved[this]) != 0)
goto restore_handler;
}
/* Now we can wait for signals. */
__NC(sigsuspend)(&tmp_mask);
restore_handler:
save_errno = errno;
while (--this >= 1)
if (__sigismember (set, this))
/* We ignore errors here since we must restore all handlers. */
sigaction (this, &saved[this], NULL);
__set_errno (save_errno);
/* Store the result and return. */
*sig = was_sig;
return was_sig == -1 ? -1 : 0;
}
void __handle_signal (shim_tcb_t * tcb, int sig, ucontext_t * uc)
{
struct shim_thread * thread = (struct shim_thread *) tcb->tp;
int begin_sig = 1, end_sig = NUM_KNOWN_SIGS;
if (sig)
end_sig = (begin_sig = sig) + 1;
sig = begin_sig;
if (!thread->has_signal.counter)
return;
while (atomic_read(&thread->has_signal)) {
struct shim_signal * signal = NULL;
for ( ; sig < end_sig ; sig++)
if (!__sigismember(&thread->signal_mask, sig) &&
(signal = fetch_signal_log(tcb, thread, sig)))
break;
if (!signal)
break;
if (!signal->context_stored)
__store_context(tcb, NULL, signal);
__handle_one_signal(tcb, sig, signal);
free(signal);
DkThreadYieldExecution();
}
tcb->context.preempt &= ~SIGNAL_DELAYED;
}
error_t
_hurd_ctty_output (io_t port, io_t ctty, error_t (*rpc) (io_t))
{
if (ctty == MACH_PORT_NULL)
return (*rpc) (port);
else
{
struct hurd_sigstate *ss = _hurd_self_sigstate ();
error_t err;
do
{
/* Don't use the ctty io port if we are blocking or ignoring
SIGTTOU. We redo this check at the top of the loop in case
the signal handler changed the state. */
__spin_lock (&ss->lock);
if (__sigismember (&ss->blocked, SIGTTOU) ||
ss->actions[SIGTTOU].sa_handler == SIG_IGN)
err = EIO;
else
err = 0;
__spin_unlock (&ss->lock);
if (err)
return (*rpc) (port);
err = (*rpc) (ctty);
if (err == EBACKGROUND)
{
if (_hurd_orphaned)
/* Our process group is orphaned, so we never generate a
signal; we just fail. */
err = EIO;
else
{
/* Send a SIGTTOU signal to our process group.
We must remember here not to clobber ERR, since
the loop condition below uses it to recall that
we should retry after a stop. */
__USEPORT (CTTYID, _hurd_sig_post (0, SIGTTOU, port));
/* XXX what to do if error here? */
/* At this point we should have just run the handler for
SIGTTOU or resumed after being stopped. Now this is
still a "system call", so check to see if we should
restart it. */
__spin_lock (&ss->lock);
if (!(ss->actions[SIGTTOU].sa_flags & SA_RESTART))
err = EINTR;
__spin_unlock (&ss->lock);
}
}
/* If the last RPC generated a SIGTTOU, loop to try it again. */
} while (err == EBACKGROUND);
return err;
}
}
int sigismember(__const sigset_t *__set, int __signo)
{
if (__signo == 0 || __signo >= _NSIG) {
errno = EINVAL;
return -1;
}
__sigismember(__set, __signo);
return 0;
}
/* Return 1 if SIGNO is in SET, 0 if not. */
int sigismember (const sigset_t *set, int signo)
{
if (set == NULL || signo <= 0 || signo >= NSIG)
{
__set_errno (EINVAL);
return -1;
}
return __sigismember (set, signo);
}
error_t
_hurd_ctty_input (io_t port, io_t ctty, error_t (*rpc) (io_t))
{
error_t err;
if (ctty == MACH_PORT_NULL)
return (*rpc) (port);
do
{
err = (*rpc) (ctty);
if (err == EBACKGROUND)
{
/* We are a background job and tried to read from the tty.
We should probably get a SIGTTIN signal. */
if (_hurd_orphaned)
/* Our process group is orphaned. Don't stop; just fail. */
err = EIO;
else
{
struct hurd_sigstate *ss = _hurd_self_sigstate ();
__spin_lock (&ss->lock);
if (__sigismember (&ss->blocked, SIGTTIN) ||
ss->actions[SIGTTIN].sa_handler == SIG_IGN)
/* We are blocking or ignoring SIGTTIN. Just fail. */
err = EIO;
__spin_unlock (&ss->lock);
if (err == EBACKGROUND)
{
/* Send a SIGTTIN signal to our process group.
We must remember here not to clobber ERR, since
the loop condition below uses it to recall that
we should retry after a stop. */
__USEPORT (CTTYID, _hurd_sig_post (0, SIGTTIN, port));
/* XXX what to do if error here? */
/* At this point we should have just run the handler for
SIGTTIN or resumed after being stopped. Now this is
still a "system call", so check to see if we should
restart it. */
__spin_lock (&ss->lock);
if (!(ss->actions[SIGTTIN].sa_flags & SA_RESTART))
err = EINTR;
__spin_unlock (&ss->lock);
}
}
}
/* If the last RPC generated a SIGTTIN, loop to try it again. */
} while (err == EBACKGROUND);
return err;
}
/* Run through all pending sighandlers and trigger them with a NULL info field.
* These handlers are triggered as the result of a pthread_kill(), and thus
* don't require individual 'info' structs. */
static void __run_pending_sighandlers()
{
struct pthread_tcb *me = pthread_self();
sigset_t andset = me->sigpending & (~me->sigmask);
for (int i = 1; i < _NSIG; i++) {
if (__sigismember(&andset, i)) {
__sigdelset(&me->sigpending, i);
trigger_posix_signal(i, NULL, &me->sigdata->u_ctx);
}
}
uthread_yield(FALSE, __exit_sighandler_cb, 0);
}
static int
do_sigtimedwait (const sigset_t *set, siginfo_t *info,
const struct timespec *timeout)
{
#ifdef SIGCANCEL
sigset_t tmpset;
if (set != NULL
&& (__builtin_expect (__sigismember (set, SIGCANCEL), 0)
# ifdef SIGSETXID
|| __builtin_expect (__sigismember (set, SIGSETXID), 0)
# endif
))
{
/* Create a temporary mask without the bit for SIGCANCEL set. */
// We are not copying more than we have to.
memcpy (&tmpset, set, _NSIG / 8);
__sigdelset (&tmpset, SIGCANCEL);
# ifdef SIGSETXID
__sigdelset (&tmpset, SIGSETXID);
# endif
set = &tmpset;
}
#endif
/* XXX The size argument hopefully will have to be changed to the
real size of the user-level sigset_t. */
int result = INLINE_SYSCALL (rt_sigtimedwait, 4, set,
info, timeout, _NSIG / 8);
/* The kernel generates a SI_TKILL code in si_code in case tkill is
used. tkill is transparently used in raise(). Since having
SI_TKILL as a code is useful in general we fold the results
here. */
if (result != -1 && info != NULL && info->si_code == SI_TKILL)
info->si_code = SI_USER;
return result;
}
static kern_return_t
set_int (int which, int value)
{
switch (which)
{
case INIT_UMASK:
_hurd_umask = value;
return 0;
/* These are pretty odd things to do. But you asked for it. */
case INIT_SIGMASK:
{
struct hurd_sigstate *ss = _hurd_thread_sigstate (_hurd_sigthread);
__spin_lock (&ss->lock);
ss->blocked = value;
__spin_unlock (&ss->lock);
return 0;
}
case INIT_SIGPENDING:
{
struct hurd_sigstate *ss = _hurd_thread_sigstate (_hurd_sigthread);
__spin_lock (&ss->lock);
ss->pending = value;
__spin_unlock (&ss->lock);
return 0;
}
case INIT_SIGIGN:
{
struct hurd_sigstate *ss = _hurd_thread_sigstate (_hurd_sigthread);
int sig;
const sigset_t ign = value;
__spin_lock (&ss->lock);
for (sig = 1; sig < NSIG; ++sig)
{
if (__sigismember (&ign, sig))
ss->actions[sig].sa_handler = SIG_IGN;
else if (ss->actions[sig].sa_handler == SIG_IGN)
ss->actions[sig].sa_handler = SIG_DFL;
}
__spin_unlock (&ss->lock);
return 0;
case INIT_TRACEMASK:
_hurdsig_traced = value;
return 0;
}
default:
return EINVAL;
}
}
/* If the given signal is unmasked, prep the pthread to run it's signal
* handler, but don't run it yet. In either case, make the pthread runnable
* again. Once the signal handler is complete, the original context will be
* restored and restarted. */
static void __pthread_signal_and_restart(struct pthread_tcb *pthread,
int signo, int code, void *addr)
{
if (!__sigismember(&pthread->sigmask, signo)) {
if (pthread->sigdata) {
printf("Pthread sighandler faulted, signal: %d\n", signo);
/* uthread.c already copied out the faulting ctx into the uth */
print_user_context(&pthread->uthread.u_ctx);
exit(-1);
}
struct siginfo info = {0};
info.si_signo = signo;
info.si_code = code;
info.si_addr = addr;
__pthread_prep_sighandler(pthread, __run_sighandler, &info);
}
pth_thread_runnable(&pthread->uthread);
}
void deliver_signal (siginfo_t * info, PAL_CONTEXT * context)
{
shim_tcb_t * tcb = SHIM_GET_TLS();
struct shim_thread * cur_thread = (struct shim_thread *) tcb->tp;
int sig = info->si_signo;
__disable_preempt(tcb);
struct shim_signal * signal = __alloca(sizeof(struct shim_signal));
/* save in signal */
memset(signal, 0, sizeof(struct shim_signal));
__store_info(info, signal);
__store_context(tcb, context, signal);
if ((tcb->context.preempt & ~SIGNAL_DELAYED) > 1)
goto delay;
if (__sigismember(&cur_thread->signal_mask, sig))
goto delay;
__handle_signal(tcb, sig, &signal->context);
__handle_one_signal(tcb, sig, signal);
goto out;
delay:
{
if (!(signal = remalloc(signal,sizeof(struct shim_signal))))
goto out;
struct shim_signal ** signal_log = allocate_signal_log(cur_thread, sig);
if (!signal_log) {
sys_printf("signal queue is full (TID = %u, SIG = %d)\n",
tcb->tid, sig);
free(signal);
goto out;
}
*signal_log = signal;
}
out:
__enable_preempt(tcb);
}
/* Select any of pending signals from SET or wait for any to arrive. */
int
__sigwait (const sigset_t *set, int *sig)
{
struct hurd_sigstate *ss;
sigset_t mask, ready;
int signo = 0;
struct hurd_signal_preemptor preemptor;
jmp_buf buf;
mach_port_t wait;
mach_msg_header_t msg;
sighandler_t
preempt_fun (struct hurd_signal_preemptor *pe,
struct hurd_sigstate *ss,
int *sigp,
struct hurd_signal_detail *detail)
{
if (signo)
/* We've already been run; don't interfere. */
return SIG_ERR;
signo = *sigp;
/* Make sure this is all kosher */
assert (__sigismember (&mask, signo));
/* Make sure this signal is unblocked */
__sigdelset (&ss->blocked, signo);
return pe->handler;
}
void
handler (int sig)
{
assert (sig == signo);
longjmp (buf, 1);
}
/* This is a quick and dirty, but not 100% compliant with
* the stupid SysV SIGCHLD vs. SIG_IGN behaviour. It is
* fine unless you are messing with SIGCHLD... */
unsigned int sleep (unsigned int sec)
{
unsigned int res;
struct timespec ts = { .tv_sec = (long int) seconds, .tv_nsec = 0 };
res = nanosleep(&ts, &ts);
if (res) res = (unsigned int) ts.tv_sec + (ts.tv_nsec >= 500000000L);
return res;
}
# else
/* We are going to use the `nanosleep' syscall of the kernel. But the
kernel does not implement the sstupid SysV SIGCHLD vs. SIG_IGN
behaviour for this syscall. Therefore we have to emulate it here. */
unsigned int sleep (unsigned int seconds)
{
struct timespec ts = { .tv_sec = (long int) seconds, .tv_nsec = 0 };
sigset_t set;
struct sigaction oact;
unsigned int result;
/* This is not necessary but some buggy programs depend on this. */
if (seconds == 0) {
# ifdef CANCELLATION_P
int cancelhandling;
CANCELLATION_P (THREAD_SELF);
# endif
return 0;
}
/* Linux will wake up the system call, nanosleep, when SIGCHLD
arrives even if SIGCHLD is ignored. We have to deal with it
in libc. */
__sigemptyset (&set);
__sigaddset (&set, SIGCHLD);
/* Is SIGCHLD set to SIG_IGN? */
sigaction (SIGCHLD, NULL, &oact); /* never fails */
if (oact.sa_handler == SIG_IGN) {
/* Yes. Block SIGCHLD, save old mask. */
sigprocmask (SIG_BLOCK, &set, &set); /* never fails */
}
/* Run nanosleep, with SIGCHLD blocked if SIGCHLD is SIG_IGNed. */
result = nanosleep (&ts, &ts);
if (result != 0) {
/* Got EINTR. Return remaining time. */
result = (unsigned int) ts.tv_sec + (ts.tv_nsec >= 500000000L);
}
if (!__sigismember (&set, SIGCHLD)) {
/* We did block SIGCHLD, and old mask had no SIGCHLD bit.
IOW: we need to unblock SIGCHLD now. Do it. */
/* this sigprocmask call never fails, thus never updates errno,
and therefore we don't need to save/restore it. */
sigprocmask (SIG_SETMASK, &set, NULL); /* never fails */
}
return result;
}
# endif
#else /* __UCLIBC_HAS_REALTIME__ */
/* no nanosleep, use signals and alarm() */
static void sleep_alarm_handler(int attribute_unused sig)
{
}
unsigned int sleep (unsigned int seconds)
{
struct sigaction act, oact;
sigset_t set, oset;
unsigned int result, remaining;
time_t before, after;
int old_errno = errno;
/* This is not necessary but some buggy programs depend on this. */
if (seconds == 0)
return 0;
/* block SIGALRM */
__sigemptyset (&set);
__sigaddset (&set, SIGALRM);
sigprocmask (SIG_BLOCK, &set, &oset); /* can't fail */
act.sa_handler = sleep_alarm_handler;
act.sa_flags = 0;
act.sa_mask = oset;
sigaction(SIGALRM, &act, &oact); /* never fails */
before = time(NULL);
remaining = alarm(seconds);
if (remaining && remaining > seconds) {
/* restore user's alarm */
sigaction(SIGALRM, &oact, NULL);
alarm(remaining); /* restore old alarm */
sigsuspend(&oset);
after = time(NULL);
} else {
sigsuspend (&oset);
after = time(NULL);
sigaction (SIGALRM, &oact, NULL);
}
result = after - before;
alarm(remaining > result ? remaining - result : 0);
sigprocmask (SIG_SETMASK, &oset, NULL);
__set_errno(old_errno);
return result > seconds ? 0 : seconds - result;
}
#endif /* __UCLIBC_HAS_REALTIME__ */
libc_hidden_def(sleep)
/* Set the disposition for SIG. */
__sighandler_t
sigset (int sig, __sighandler_t disp)
{
struct sigaction act;
struct sigaction oact;
sigset_t set;
sigset_t oset;
#ifdef SIG_HOLD
/* Handle SIG_HOLD first. */
if (disp == SIG_HOLD)
{
/* Create an empty signal set. */
if (__sigemptyset (&set) < 0)
return SIG_ERR;
/* Add the specified signal. */
if (__sigaddset (&set, sig) < 0)
return SIG_ERR;
/* Add the signal set to the current signal mask. */
if (__sigprocmask (SIG_BLOCK, &set, &oset) < 0)
return SIG_ERR;
/* If the signal was already blocked signal this to the caller. */
if (__sigismember (&oset, sig))
return SIG_HOLD;
/* We need to determine whether a specific handler is installed. */
if (__sigaction (sig, NULL, &oact) < 0)
return SIG_ERR;
return oact.sa_handler;
}
#endif /* SIG_HOLD */
/* Check signal extents to protect __sigismember. */
if (disp == SIG_ERR || sig < 1 || sig >= NSIG)
{
__set_errno (EINVAL);
return SIG_ERR;
}
act.sa_handler = disp;
if (__sigemptyset (&act.sa_mask) < 0)
return SIG_ERR;
act.sa_flags = 0;
if (__sigaction (sig, &act, &oact) < 0)
return SIG_ERR;
/* Create an empty signal set. */
if (__sigemptyset (&set) < 0)
return SIG_ERR;
/* Add the specified signal. */
if (__sigaddset (&set, sig) < 0)
return SIG_ERR;
/* Remove the signal set from the current signal mask. */
if (__sigprocmask (SIG_UNBLOCK, &set, &oset) < 0)
return SIG_ERR;
/* If the signal was already blocked return SIG_HOLD. */
return __sigismember (&oset, sig) ? SIG_HOLD : oact.sa_handler;
}
/* Spawn a new process executing PATH with the attributes describes in *ATTRP.
Before running the process perform the actions described in FILE-ACTIONS. */
int
__spawni (pid_t *pid, const char *file,
const posix_spawn_file_actions_t *file_actions,
const posix_spawnattr_t *attrp, char *const argv[],
char *const envp[], int xflags)
{
pid_t new_pid;
char *path, *p, *name;
size_t len;
size_t pathlen;
/* Do this once. */
short int flags = attrp == NULL ? 0 : attrp->__flags;
/* Generate the new process. */
if ((flags & POSIX_SPAWN_USEVFORK) != 0
/* If no major work is done, allow using vfork. Note that we
might perform the path searching. But this would be done by
a call to execvp(), too, and such a call must be OK according
to POSIX. */
|| ((flags & (POSIX_SPAWN_SETSIGMASK | POSIX_SPAWN_SETSIGDEF
| POSIX_SPAWN_SETSCHEDPARAM | POSIX_SPAWN_SETSCHEDULER
| POSIX_SPAWN_SETPGROUP | POSIX_SPAWN_RESETIDS)) == 0
&& file_actions == NULL))
new_pid = __vfork ();
else
new_pid = __fork ();
if (new_pid != 0)
{
if (new_pid < 0)
return errno;
/* The call was successful. Store the PID if necessary. */
if (pid != NULL)
*pid = new_pid;
return 0;
}
/* Set signal mask. */
if ((flags & POSIX_SPAWN_SETSIGMASK) != 0
&& __sigprocmask (SIG_SETMASK, &attrp->__ss, NULL) != 0)
_exit (SPAWN_ERROR);
/* Set signal default action. */
if ((flags & POSIX_SPAWN_SETSIGDEF) != 0)
{
/* We have to iterate over all signals. This could possibly be
done better but it requires system specific solutions since
the sigset_t data type can be very different on different
architectures. */
int sig;
struct sigaction sa;
memset (&sa, '\0', sizeof (sa));
sa.sa_handler = SIG_DFL;
for (sig = 1; sig <= _NSIG; ++sig)
if (__sigismember (&attrp->__sd, sig) != 0
&& __sigaction (sig, &sa, NULL) != 0)
_exit (SPAWN_ERROR);
}
#ifdef _POSIX_PRIORITY_SCHEDULING
/* Set the scheduling algorithm and parameters. */
if ((flags & (POSIX_SPAWN_SETSCHEDPARAM | POSIX_SPAWN_SETSCHEDULER))
== POSIX_SPAWN_SETSCHEDPARAM)
{
if (__sched_setparam (0, &attrp->__sp) == -1)
_exit (SPAWN_ERROR);
}
else if ((flags & POSIX_SPAWN_SETSCHEDULER) != 0)
{
if (__sched_setscheduler (0, attrp->__policy, &attrp->__sp) == -1)
_exit (SPAWN_ERROR);
}
#endif
/* Set the process group ID. */
if ((flags & POSIX_SPAWN_SETPGROUP) != 0
&& __setpgid (0, attrp->__pgrp) != 0)
_exit (SPAWN_ERROR);
/* Set the effective user and group IDs. */
if ((flags & POSIX_SPAWN_RESETIDS) != 0
&& (local_seteuid (__getuid ()) != 0
|| local_setegid (__getgid ()) != 0))
_exit (SPAWN_ERROR);
/* Execute the file actions. */
if (file_actions != NULL)
{
int cnt;
struct rlimit64 fdlimit;
bool have_fdlimit = false;
for (cnt = 0; cnt < file_actions->__used; ++cnt)
{
struct __spawn_action *action = &file_actions->__actions[cnt];
switch (action->tag)
{
case spawn_do_close:
if (close_not_cancel (action->action.close_action.fd) != 0)
{
if (! have_fdlimit)
{
getrlimit64 (RLIMIT_NOFILE, &fdlimit);
have_fdlimit = true;
}
/* Only signal errors for file descriptors out of range. */
if (action->action.close_action.fd < 0
|| action->action.close_action.fd >= fdlimit.rlim_cur)
/* Signal the error. */
_exit (SPAWN_ERROR);
}
break;
case spawn_do_open:
{
int new_fd = open_not_cancel (action->action.open_action.path,
action->action.open_action.oflag
| O_LARGEFILE,
action->action.open_action.mode);
if (new_fd == -1)
/* The `open' call failed. */
_exit (SPAWN_ERROR);
/* Make sure the desired file descriptor is used. */
if (new_fd != action->action.open_action.fd)
{
if (__dup2 (new_fd, action->action.open_action.fd)
!= action->action.open_action.fd)
/* The `dup2' call failed. */
_exit (SPAWN_ERROR);
if (close_not_cancel (new_fd) != 0)
/* The `close' call failed. */
_exit (SPAWN_ERROR);
}
}
break;
case spawn_do_dup2:
if (__dup2 (action->action.dup2_action.fd,
action->action.dup2_action.newfd)
!= action->action.dup2_action.newfd)
/* The `dup2' call failed. */
_exit (SPAWN_ERROR);
break;
}
}
}
if ((xflags & SPAWN_XFLAGS_USE_PATH) == 0 || strchr (file, '/') != NULL)
{
/* The FILE parameter is actually a path. */
__execve (file, argv, envp);
maybe_script_execute (file, argv, envp, xflags);
/* Oh, oh. `execve' returns. This is bad. */
_exit (SPAWN_ERROR);
}
/* We have to search for FILE on the path. */
path = getenv ("PATH");
if (path == NULL)
{
/* There is no `PATH' in the environment.
The default search path is the current directory
followed by the path `confstr' returns for `_CS_PATH'. */
len = confstr (_CS_PATH, (char *) NULL, 0);
path = (char *) __alloca (1 + len);
path[0] = ':';
(void) confstr (_CS_PATH, path + 1, len);
}
len = strlen (file) + 1;
pathlen = strlen (path);
name = __alloca (pathlen + len + 1);
/* Copy the file name at the top. */
name = (char *) memcpy (name + pathlen + 1, file, len);
/* And add the slash. */
*--name = '/';
p = path;
do
{
char *startp;
path = p;
p = __strchrnul (path, ':');
if (p == path)
/* Two adjacent colons, or a colon at the beginning or the end
of `PATH' means to search the current directory. */
startp = name + 1;
else
startp = (char *) memcpy (name - (p - path), path, p - path);
/* Try to execute this name. If it works, execv will not return. */
__execve (startp, argv, envp);
maybe_script_execute (startp, argv, envp, xflags);
switch (errno)
{
case EACCES:
case ENOENT:
case ESTALE:
case ENOTDIR:
/* Those errors indicate the file is missing or not executable
by us, in which case we want to just try the next path
directory. */
break;
default:
/* Some other error means we found an executable file, but
something went wrong executing it; return the error to our
caller. */
_exit (SPAWN_ERROR);
}
}
while (*p++ != '\0');
/* Return with an error. */
_exit (SPAWN_ERROR);
}
/* We are going to use the `nanosleep' syscall of the kernel. But the
kernel does not implement the stupid SysV SIGCHLD vs. SIG_IGN
behaviour for this syscall. Therefore we have to emulate it here. */
unsigned int
__sleep (unsigned int seconds)
{
const unsigned int max
= (unsigned int) (((unsigned long int) (~((time_t) 0))) >> 1);
struct timespec ts;
sigset_t set, oset;
unsigned int result;
/* This is not necessary but some buggy programs depend on this. */
if (__glibc_unlikely (seconds == 0))
{
#ifdef CANCELLATION_P
CANCELLATION_P (THREAD_SELF);
#endif
return 0;
}
ts.tv_sec = 0;
ts.tv_nsec = 0;
again:
if (sizeof (ts.tv_sec) <= sizeof (seconds))
{
/* Since SECONDS is unsigned assigning the value to .tv_sec can
overflow it. In this case we have to wait in steps. */
ts.tv_sec += MIN (seconds, max);
seconds -= (unsigned int) ts.tv_sec;
}
else
{
ts.tv_sec = (time_t) seconds;
seconds = 0;
}
/* Linux will wake up the system call, nanosleep, when SIGCHLD
arrives even if SIGCHLD is ignored. We have to deal with it
in libc. We block SIGCHLD first. */
__sigemptyset (&set);
__sigaddset (&set, SIGCHLD);
if (__sigprocmask (SIG_BLOCK, &set, &oset))
return -1;
/* If SIGCHLD is already blocked, we don't have to do anything. */
if (!__sigismember (&oset, SIGCHLD))
{
int saved_errno;
struct sigaction oact;
__sigemptyset (&set);
__sigaddset (&set, SIGCHLD);
/* We get the signal handler for SIGCHLD. */
if (__sigaction (SIGCHLD, (struct sigaction *) NULL, &oact) < 0)
{
saved_errno = errno;
/* Restore the original signal mask. */
(void) __sigprocmask (SIG_SETMASK, &oset, (sigset_t *) NULL);
__set_errno (saved_errno);
return -1;
}
/* Note the sleep() is a cancellation point. But since we call
nanosleep() which itself is a cancellation point we do not
have to do anything here. */
if (oact.sa_handler == SIG_IGN)
{
//__libc_cleanup_push (cl, &oset);
/* We should leave SIGCHLD blocked. */
while (1)
{
result = __nanosleep (&ts, &ts);
if (result != 0 || seconds == 0)
break;
if (sizeof (ts.tv_sec) <= sizeof (seconds))
{
ts.tv_sec = MIN (seconds, max);
seconds -= (unsigned int) ts.tv_nsec;
}
}
//__libc_cleanup_pop (0);
saved_errno = errno;
/* Restore the original signal mask. */
(void) __sigprocmask (SIG_SETMASK, &oset, (sigset_t *) NULL);
__set_errno (saved_errno);
goto out;
}
/* We should unblock SIGCHLD. Restore the original signal mask. */
(void) __sigprocmask (SIG_SETMASK, &oset, (sigset_t *) NULL);
}
result = __nanosleep (&ts, &ts);
if (result == 0 && seconds != 0)
goto again;
out:
if (result != 0)
/* Round remaining time. */
result = seconds + (unsigned int) ts.tv_sec + (ts.tv_nsec >= 500000000L);
return result;
}
/* We are going to use the `nanosleep' syscall of the kernel. But the
kernel does not implement the sstupid SysV SIGCHLD vs. SIG_IGN
behaviour for this syscall. Therefore we have to emulate it here. */
unsigned int sleep (unsigned int seconds)
{
struct timespec ts = { tv_sec: (long int) seconds, tv_nsec: 0 };
sigset_t set, oset;
unsigned int result;
/* This is not necessary but some buggy programs depend on this. */
if (seconds == 0)
return 0;
/* Linux will wake up the system call, nanosleep, when SIGCHLD
arrives even if SIGCHLD is ignored. We have to deal with it
in libc. We block SIGCHLD first. */
if (__sigemptyset (&set) < 0
|| __sigaddset (&set, SIGCHLD) < 0
|| sigprocmask (SIG_BLOCK, &set, &oset))
return -1;
/* If SIGCHLD is already blocked, we don't have to do anything. */
if (!__sigismember (&oset, SIGCHLD))
{
int saved_errno;
struct sigaction oact;
if (__sigemptyset (&set) < 0 || __sigaddset (&set, SIGCHLD) < 0)
return -1;
/* We get the signal handler for SIGCHLD. */
if (sigaction (SIGCHLD, (struct sigaction *) NULL, &oact) < 0)
{
saved_errno = errno;
/* Restore the original signal mask. */
(void) sigprocmask (SIG_SETMASK, &oset, (sigset_t *) NULL);
__set_errno (saved_errno);
return -1;
}
if (oact.sa_handler == SIG_IGN)
{
/* We should leave SIGCHLD blocked. */
result = nanosleep (&ts, &ts);
saved_errno = errno;
/* Restore the original signal mask. */
(void) sigprocmask (SIG_SETMASK, &oset, (sigset_t *) NULL);
__set_errno (saved_errno);
}
else
{
/* We should unblock SIGCHLD. Restore the original signal mask. */
(void) sigprocmask (SIG_SETMASK, &oset, (sigset_t *) NULL);
result = nanosleep (&ts, &ts);
}
}
else
result = nanosleep (&ts, &ts);
if (result != 0)
/* Round remaining time. */
result = (unsigned int) ts.tv_sec + (ts.tv_nsec >= 500000000L);
return result;
}