コード例 #1
0
ファイル: uthread_poll.c プロジェクト: AhmadTux/DragonFlyBSD
int 
_poll(struct pollfd *fds, unsigned int nfds, int timeout)
{
	struct pthread	*curthread = _get_curthread();
	struct timespec	ts;
	int		numfds = nfds;
	int             i, ret = 0;
	struct pthread_poll_data data;

	if (numfds > _thread_dtablesize) {
		numfds = _thread_dtablesize;
	}
	/* Check if a timeout was specified: */
	if (timeout == INFTIM) {
		/* Wait for ever: */
		_thread_kern_set_timeout(NULL);
	} else if (timeout > 0) {
		/* Convert the timeout in msec to a timespec: */
		ts.tv_sec = timeout / 1000;
		ts.tv_nsec = (timeout % 1000) * 1000000;

		/* Set the wake up time: */
		_thread_kern_set_timeout(&ts);
	} else if (timeout < 0) {
		/* a timeout less than zero but not == INFTIM is invalid */
		errno = EINVAL;
		return (-1);
	}

	if (((ret = __sys_poll(fds, numfds, 0)) == 0) && (timeout != 0)) {
		data.nfds = numfds;
		data.fds = fds;

		/*
		 * Clear revents in case of a timeout which leaves fds
		 * unchanged:
		 */
		for (i = 0; i < numfds; i++) {
			fds[i].revents = 0;
		}

		curthread->data.poll_data = &data;
		curthread->interrupted = 0;
		_thread_kern_sched_state(PS_POLL_WAIT, __FILE__, __LINE__);
		if (curthread->interrupted) {
			errno = EINTR;
			ret = -1;
		} else {
			ret = data.nfds;
		}
	}

	return (ret);
}
コード例 #2
0
ファイル: uthread_sendmsg.c プロジェクト: 5432935/crossbridge
ssize_t
_sendmsg(int fd, const struct msghdr *msg, int flags)
{
	struct pthread	*curthread = _get_curthread();
	int             ret;

	if ((ret = _FD_LOCK(fd, FD_WRITE, NULL)) == 0) {
		while ((ret = __sys_sendmsg(fd, msg, flags)) < 0) {
			if (!(_thread_fd_getflags(fd) & O_NONBLOCK)
			    && ((errno == EWOULDBLOCK) || (errno == EAGAIN))) {
				curthread->data.fd.fd = fd;

				/* Set the timeout: */
				_thread_kern_set_timeout(NULL);
				curthread->interrupted = 0;
				_thread_kern_sched_state(PS_FDW_WAIT, __FILE__, __LINE__);

				/* Check if the operation was interrupted: */
				if (curthread->interrupted) {
					errno = EINTR;
					ret = -1;
					break;
				}
			} else {
				ret = -1;
				break;
			}
		}
		_FD_UNLOCK(fd, FD_WRITE);
	}
	return (ret);
}
コード例 #3
0
ファイル: uthread_recvfrom.c プロジェクト: sofuture/bitrig
ssize_t
recvfrom(int fd, void *buf, size_t len, int flags, struct sockaddr * from, socklen_t *from_len)
{
	struct pthread	*curthread = _get_curthread();
	ssize_t		ret;

	/* This is a cancellation point: */
	_thread_enter_cancellation_point();

	if ((ret = _FD_LOCK(fd, FD_READ, NULL)) == 0) {
		while ((ret = _thread_sys_recvfrom(fd, buf, len, flags, from, from_len)) < 0) {
			if (!(_thread_fd_table[fd]->status_flags->flags & O_NONBLOCK) &&
			    !(flags & MSG_DONTWAIT) &&
			    ((errno == EWOULDBLOCK) || (errno == EAGAIN))) {
				curthread->data.fd.fd = fd;

				/* Set the timeout: */
				_thread_kern_set_timeout(_FD_RCVTIMEO(fd));
				curthread->interrupted = 0;
				curthread->closing_fd = 0;
				curthread->timeout = 0;
				_thread_kern_sched_state(PS_FDR_WAIT, __FILE__, __LINE__);

				/* Check if the wait was interrupted: */
				if (curthread->interrupted) {
					/* Return an error status: */
					errno = EINTR;
					ret = -1;
					break;
				} else if (curthread->closing_fd) {
					/* Return an error status: */
					errno = EBADF;
					ret = -1;
					break;
				} else if (curthread->timeout) {
					/* Return an error status: */
					errno = EWOULDBLOCK;
					ret = -1;
					break;
				}
			} else {
				ret = -1;
				break;
			}
		}
		_FD_UNLOCK(fd, FD_READ);
	}

	/* No longer in a cancellation point: */
	_thread_leave_cancellation_point();

	return (ret);
}
コード例 #4
0
ssize_t
read(int fd, void *buf, size_t nbytes)
{
    struct pthread	*curthread = _get_curthread();
    ssize_t	ret;
    int	type;

    /* This is a cancellation point: */
    _thread_enter_cancellation_point();

    /* POSIX says to do just this: */
    if (nbytes == 0)
        ret = 0;

    /* Lock the file descriptor for read: */
    else if ((ret = _FD_LOCK(fd, FD_READ, NULL)) == 0) {
        /* Get the read/write mode type: */
        type = _thread_fd_table[fd]->status_flags->flags & O_ACCMODE;

        /* Check if the file is not open for read: */
        if (type != O_RDONLY && type != O_RDWR) {
            /* File is not open for read: */
            errno = EBADF;
            ret = -1;
        }

        /* Perform a non-blocking read syscall: */
        else while ((ret = _thread_sys_read(fd, buf, nbytes)) < 0) {
                if ((_thread_fd_table[fd]->status_flags->flags & O_NONBLOCK) == 0 &&
                        (errno == EWOULDBLOCK || errno == EAGAIN)) {
                    curthread->data.fd.fd = fd;
                    _thread_kern_set_timeout(NULL);

                    /* Reset the interrupted operation flag: */
                    curthread->interrupted = 0;
                    curthread->closing_fd = 0;

                    _thread_kern_sched_state(PS_FDR_WAIT,
                                             __FILE__, __LINE__);

                    /*
                     * Check if the operation was
                     * interrupted by a signal or
                     * a closing fd.
                     */
                    if (curthread->interrupted) {
                        errno = EINTR;
                        ret = -1;
                        break;
                    } else if (curthread->closing_fd) {
                        errno = EBADF;
                        ret = -1;
                        break;
                    }
                } else {
                    break;
                }
            }
        _FD_UNLOCK(fd, FD_READ);
    }

    /* No longer in a cancellation point: */
    _thread_leave_cancellation_point();

    return (ret);
}
コード例 #5
0
ファイル: uthread_writev.c プロジェクト: mikekmv/aeriebsd-src
ssize_t
writev(int fd, const struct iovec * iov, int iovcnt)
{
	struct pthread	*curthread = _get_curthread();
	int	blocking;
	int	idx = 0;
	int	type;
	ssize_t num = 0;
	size_t cnt;
	ssize_t n;
	ssize_t	ret;
	struct iovec liov[20];
	struct iovec *p_iov = liov;

	/* This is a cancellation point: */
	_thread_enter_cancellation_point();

	/* Check if the array size exceeds to compiled in size: */
	if (iovcnt > (int) (sizeof(liov) / sizeof(struct iovec))) {
		/* Allocate memory for the local array: */
		if ((p_iov = (struct iovec *)
		    malloc((size_t)iovcnt * sizeof(struct iovec))) == NULL) {
			/* Insufficient memory: */
			errno = ENOMEM;
			_thread_leave_cancellation_point();
			return (-1);
		}
	} else if (iovcnt <= 0) {
		errno = EINVAL;
		_thread_leave_cancellation_point();
		return (-1);
	}

	/* Copy the caller's array so that it can be modified locally: */
	memcpy(p_iov,iov,(size_t)iovcnt * sizeof(struct iovec));

	/* Lock the file descriptor for write: */
	if ((ret = _FD_LOCK(fd, FD_WRITE, NULL)) == 0) {
		/* Get the read/write mode type: */
		type = _thread_fd_table[fd]->status_flags->flags & O_ACCMODE;

		/* Check if the file is not open for write: */
		if (type != O_WRONLY && type != O_RDWR) {
			/* File is not open for write: */
			errno = EBADF;
			_FD_UNLOCK(fd, FD_WRITE);
			if (p_iov != liov)
				free(p_iov);
			_thread_leave_cancellation_point();
			return (-1);
		}

		/* Check if file operations are to block */
		blocking = ((_thread_fd_table[fd]->status_flags->flags & O_NONBLOCK) == 0);

		/*
		 * Loop while no error occurs and until the expected number
		 * of bytes are written if performing a blocking write:
		 */
		while (ret == 0) {
			/* Perform a non-blocking write syscall: */
			n = _thread_sys_writev(fd, &p_iov[idx], iovcnt - idx);

			/* Check if one or more bytes were written: */
			if (n > 0) {
				/*
				 * Keep a count of the number of bytes
				 * written:
				 */
				num += n;

				/*
				 * Enter a loop to check if a short write
				 * occurred and move the index to the
				 * array entry where the short write
				 * ended:
				 */
				cnt = (size_t)n;
				while (cnt > 0 && idx < iovcnt) {
					/*
					 * If the residual count exceeds
					 * the size of this vector, then
					 * it was completely written:
					 */
					if (cnt >= p_iov[idx].iov_len)
						/*
						 * Decrement the residual
						 * count and increment the
						 * index to the next array
						 * entry:
						 */
						cnt -= p_iov[idx++].iov_len;
					else {
						/*
						 * This entry was only
						 * partially written, so
						 * adjust it's length
						 * and base pointer ready
						 * for the next write:
						 */
						p_iov[idx].iov_len -= cnt;
						p_iov[idx].iov_base =
						    (char *)p_iov[idx].iov_base
						    + (ptrdiff_t)cnt;
						cnt = 0;
					}
				}
			} else if (n == 0) {
				/*
				 * Avoid an infinite loop if the last iov_len is
				 * 0.
				 */
				while (idx < iovcnt && p_iov[idx].iov_len == 0)
					idx++;

				if (idx == iovcnt) {
					ret = num;
					break;
				}
			}

			/*
			 * If performing a blocking write, check if the
			 * write would have blocked or if some bytes
			 * were written but there are still more to
			 * write:
			 */
			if (blocking && ((n < 0 && (errno == EWOULDBLOCK ||
			    errno == EAGAIN)) || (n >= 0 && idx < iovcnt))) {
				curthread->data.fd.fd = fd;
				_thread_kern_set_timeout(NULL);

				/* Reset the interrupted operation flag: */
				curthread->interrupted = 0;
				curthread->closing_fd = 0;

				_thread_kern_sched_state(PS_FDW_WAIT,
				    __FILE__, __LINE__);

				/*
				 * Check if the operation was
				 * interrupted by a signal
				 */
				if (curthread->interrupted || curthread->closing_fd) {
					if (num > 0) {
						/* Return partial success: */
						ret = num;
					} else {
						/* Return an error: */
						if (curthread->closing_fd)
							errno = EBADF;
						else
							errno = EINTR;
						ret = -1;
					}
				}

			/*
			 * If performing a non-blocking write,
			 * just return whatever the write syscall did:
			 */
			} else if (!blocking) {
				/* A non-blocking call might return zero: */
				ret = n;
				break;

			/*
			 * If there was an error, return partial success
			 * (if any bytes were written) or else the error:
			 */
			} else if (n < 0) {
				if (num > 0)
					ret = num;
				else
					ret = n;

			/* Check if the write has completed: */
			} else if (idx == iovcnt)
				/* Return the number of bytes written: */
				ret = num;
		}
		_FD_UNLOCK(fd, FD_WRITE);
	}

	/* If memory was allocated for the array, free it: */
	if (p_iov != liov)
		free(p_iov);

	/* No longer in a cancellation point: */
	_thread_leave_cancellation_point();

	return (ret);
}
コード例 #6
0
ファイル: uthread_accept.c プロジェクト: sofuture/bitrig
int
accept(int fd, struct sockaddr * name, socklen_t *namelen)
{
	struct pthread	*curthread = _get_curthread();
	int             ret;
	int		newfd;
	enum fd_entry_mode init_mode;

	/* This is a cancellation point: */
	_thread_enter_cancellation_point();

	/* Lock the file descriptor: */
	if ((ret = _FD_LOCK(fd, FD_RDWR, NULL)) == 0) {
		/* Enter a loop to wait for a connection request: */
		while ((ret = _thread_sys_accept(fd, name, namelen)) < 0) {
			/* Check if the socket is to block: */
			if ((_thread_fd_table[fd]->status_flags->flags & O_NONBLOCK) == 0 &&
			    (errno == EWOULDBLOCK || errno == EAGAIN)) {
				/* Save the socket file descriptor: */
				curthread->data.fd.fd = fd;
				curthread->data.fd.fname = __FILE__;
				curthread->data.fd.branch = __LINE__;

				/* Set the timeout: */
				_thread_kern_set_timeout(NULL);
				curthread->interrupted = 0;
				curthread->closing_fd = 0;

				/* Schedule the next thread: */
				_thread_kern_sched_state(PS_FDR_WAIT, __FILE__,
							 __LINE__);

				/* Check if the wait was interrupted: */
				if (curthread->interrupted) {
					/* Return an error status: */
					errno = EINTR;
					ret = -1;
					break;
				} else if (curthread->closing_fd) {
					/* Return an error status: */
					errno = EBADF;
					ret = -1;
					break;
				}
			} else {
				/*
				 * Another error has occurred, so exit the
				 * loop here: 
				 */
				break;
			}
		}

		/*
		 * If no errors initialize the file descriptor table
		 * for the new socket. If the client's view of the
		 * status_flags for fd is blocking, then force newfd
		 * to be viewed as blocking too.
		 */
		if (ret != -1) {
			newfd = ret;

			if ((_thread_fd_table[fd]->status_flags->flags & O_NONBLOCK) == 0)
				init_mode = FD_INIT_BLOCKING;
			else
				init_mode = FD_INIT_NEW;
			if((ret = _thread_fd_table_init(newfd, init_mode, NULL)) != -1)
				ret = newfd;
			else {
				/* quitely close the fd */
				_thread_sys_close(ret);
			}
		}

		/* Unlock the file descriptor: */
		_FD_UNLOCK(fd, FD_RDWR);
	}

	/* No longer in a cancellation point: */
	_thread_leave_cancellation_point();

	/* Return the socket file descriptor or -1 on error: */
	return (ret);
}
コード例 #7
0
int
connect(int fd, const struct sockaddr * name, socklen_t namelen)
{
	struct pthread	*curthread = _get_curthread();
	struct sockaddr tmpname;
	socklen_t	errnolen, tmpnamelen;
	int             ret;

	/* This is a cancellation point: */
	_thread_enter_cancellation_point();

	if ((ret = _FD_LOCK(fd, FD_RDWR, NULL)) == 0) {
		if ((ret = _thread_sys_connect(fd, name, namelen)) < 0) {
			if (!(_thread_fd_table[fd]->status_flags->flags & O_NONBLOCK) &&
			((errno == EWOULDBLOCK) || (errno == EINPROGRESS) ||
			 (errno == EALREADY) || (errno == EAGAIN))) {
				curthread->data.fd.fd = fd;

				/* Reset the interrupted operation flag: */
				curthread->interrupted = 0;
				curthread->closing_fd = 0;

				/* Set the timeout: */
				_thread_kern_set_timeout(NULL);
				_thread_kern_sched_state(PS_FDW_WAIT, __FILE__, __LINE__);

				/*
				 * Check if the operation was
				 * interrupted by a signal or
				 * a closing fd.
				 */
				if (curthread->interrupted) {
					errno = EINTR;
					ret = -1;
				} else if (curthread->closing_fd) {
					errno = EBADF;
					ret = -1;
				} else {
					tmpnamelen = sizeof(tmpname);
					/* 0 now lets see if it really worked */
					if (((ret = _thread_sys_getpeername(fd, &tmpname, &tmpnamelen)) < 0) &&
					    (errno == ENOTCONN)) {

						/*
						 * Get the error, this function
						 * should not fail 
						 */
						errnolen = sizeof(errno);
						_thread_sys_getsockopt(fd, SOL_SOCKET, SO_ERROR, &errno, &errnolen);
					}
				}
			} else {
				ret = -1;
			}
		}
		_FD_UNLOCK(fd, FD_RDWR);
	}

	/* No longer in a cancellation point: */
	_thread_leave_cancellation_point();

	return (ret);
}