static int acpi_processor_start(struct acpi_device *device)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_processor *pr;
ACPI_FUNCTION_TRACE("acpi_processor_start");
pr = acpi_driver_data(device);
result = acpi_processor_get_info(pr);
if (result) {
/* Processor is physically not present */
return_VALUE(0);
}
BUG_ON((pr->id >= NR_CPUS) || (pr->id < 0));
/*
* Buggy BIOS check
* ACPI id of processors can be reported wrongly by the BIOS.
* Don't trust it blindly
*/
if (processor_device_array[pr->id] != NULL &&
processor_device_array[pr->id] != (void *)device) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "BIOS reporting wrong ACPI id"
"for the processor\n"));
return_VALUE(-ENODEV);
}
processor_device_array[pr->id] = (void *)device;
processors[pr->id] = pr;
result = acpi_processor_add_fs(device);
if (result)
goto end;
status = acpi_install_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify, pr);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Error installing device notify handler\n"));
}
acpi_processor_power_init(pr, device);
if (pr->flags.throttling) {
printk(KERN_INFO PREFIX "%s [%s] (supports",
acpi_device_name(device), acpi_device_bid(device));
printk(" %d throttling states", pr->throttling.state_count);
printk(")\n");
}
end:
return_VALUE(result);
}
static int __cpuinit acpi_processor_start(struct acpi_device *device)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_processor *pr;
pr = acpi_driver_data(device);
result = acpi_processor_get_info(pr);
if (result) {
/* Processor is physically not present */
return 0;
}
BUG_ON((pr->id >= NR_CPUS) || (pr->id < 0));
/*
* Buggy BIOS check
* ACPI id of processors can be reported wrongly by the BIOS.
* Don't trust it blindly
*/
if (processor_device_array[pr->id] != NULL &&
processor_device_array[pr->id] != device) {
printk(KERN_WARNING "BIOS reported wrong ACPI id"
"for the processor\n");
return -ENODEV;
}
processor_device_array[pr->id] = device;
processors[pr->id] = pr;
result = acpi_processor_add_fs(device);
if (result)
goto end;
status = acpi_install_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify, pr);
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
acpi_processor_power_init(pr, device);
if (pr->flags.throttling) {
printk(KERN_INFO PREFIX "%s [%s] (supports",
acpi_device_name(device), acpi_device_bid(device));
printk(" %d throttling states", pr->throttling.state_count);
printk(")\n");
}
end:
return result;
}
static int __cpuinit acpi_processor_add(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
int result = 0;
struct sys_device *sysdev;
pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
if (!pr)
return -ENOMEM;
if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
kfree(pr);
return -ENOMEM;
}
pr->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
device->driver_data = pr;
result = acpi_processor_get_info(device);
if (result) {
/* Processor is physically not present */
return 0;
}
BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
/*
* Buggy BIOS check
* ACPI id of processors can be reported wrongly by the BIOS.
* Don't trust it blindly
*/
if (per_cpu(processor_device_array, pr->id) != NULL &&
per_cpu(processor_device_array, pr->id) != device) {
printk(KERN_WARNING "BIOS reported wrong ACPI id "
"for the processor\n");
result = -ENODEV;
goto err_free_cpumask;
}
per_cpu(processor_device_array, pr->id) = device;
per_cpu(processors, pr->id) = pr;
result = acpi_processor_add_fs(device);
if (result)
goto err_free_cpumask;
sysdev = get_cpu_sysdev(pr->id);
if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
result = -EFAULT;
goto err_remove_fs;
}
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
arch_acpi_processor_cleanup_pdc(pr);
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr);
#endif
acpi_processor_get_throttling_info(pr);
acpi_processor_get_limit_info(pr);
acpi_processor_power_init(pr, device);
pr->cdev = thermal_cooling_device_register("Processor", device,
&processor_cooling_ops);
if (IS_ERR(pr->cdev)) {
result = PTR_ERR(pr->cdev);
goto err_power_exit;
}
dev_info(&device->dev, "registered as cooling_device%d\n",
pr->cdev->id);
result = sysfs_create_link(&device->dev.kobj,
&pr->cdev->device.kobj,
"thermal_cooling");
if (result) {
printk(KERN_ERR PREFIX "Create sysfs link\n");
goto err_thermal_unregister;
}
result = sysfs_create_link(&pr->cdev->device.kobj,
&device->dev.kobj,
"device");
if (result) {
printk(KERN_ERR PREFIX "Create sysfs link\n");
goto err_remove_sysfs;
}
return 0;
err_remove_sysfs:
sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
err_thermal_unregister:
thermal_cooling_device_unregister(pr->cdev);
err_power_exit:
acpi_processor_power_exit(pr, device);
err_remove_fs:
acpi_processor_remove_fs(device);
err_free_cpumask:
free_cpumask_var(pr->throttling.shared_cpu_map);
return result;
}
static int __cpuinit acpi_processor_start(struct acpi_device *device)
{
int result = 0;
struct acpi_processor *pr;
struct sys_device *sysdev;
pr = acpi_driver_data(device);
result = acpi_processor_get_info(device);
if (result) {
/* Processor is physically not present */
return 0;
}
BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
/*
* Buggy BIOS check
* ACPI id of processors can be reported wrongly by the BIOS.
* Don't trust it blindly
*/
if (per_cpu(processor_device_array, pr->id) != NULL &&
per_cpu(processor_device_array, pr->id) != device) {
printk(KERN_WARNING "BIOS reported wrong ACPI id "
"for the processor\n");
return -ENODEV;
}
per_cpu(processor_device_array, pr->id) = device;
per_cpu(processors, pr->id) = pr;
result = acpi_processor_add_fs(device);
if (result)
goto end;
sysdev = get_cpu_sysdev(pr->id);
if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev"))
return -EFAULT;
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr);
#endif
acpi_processor_get_throttling_info(pr);
acpi_processor_get_limit_info(pr);
acpi_processor_power_init(pr, device);
pr->cdev = thermal_cooling_device_register("Processor", device,
&processor_cooling_ops);
if (IS_ERR(pr->cdev)) {
result = PTR_ERR(pr->cdev);
goto end;
}
dev_info(&device->dev, "registered as cooling_device%d\n",
pr->cdev->id);
result = sysfs_create_link(&device->dev.kobj,
&pr->cdev->device.kobj,
"thermal_cooling");
if (result)
printk(KERN_ERR PREFIX "Create sysfs link\n");
result = sysfs_create_link(&pr->cdev->device.kobj,
&device->dev.kobj,
"device");
if (result)
printk(KERN_ERR PREFIX "Create sysfs link\n");
if (pr->flags.throttling) {
printk(KERN_INFO PREFIX "%s [%s] (supports",
acpi_device_name(device), acpi_device_bid(device));
printk(" %d throttling states", pr->throttling.state_count);
printk(")\n");
}
end:
return result;
}
static int __cpuinit acpi_processor_add(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
int result = 0;
struct sys_device *sysdev;
pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
if (!pr)
return -ENOMEM;
if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
kfree(pr);
return -ENOMEM;
}
pr->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
device->driver_data = pr;
processor_extcntl_init();
result = acpi_processor_get_info(device);
if (result ||
((pr->id == -1) && !processor_cntl_external())) {
/* Processor is physically not present */
return 0;
}
BUG_ON(!processor_cntl_external() &&
((pr->id >= nr_cpu_ids) || (pr->id < 0)));
/*
* Buggy BIOS check
* ACPI id of processors can be reported wrongly by the BIOS.
* Don't trust it blindly
*/
#ifndef CONFIG_XEN
if (per_cpu(processor_device_array, pr->id) != NULL &&
per_cpu(processor_device_array, pr->id) != device) {
#else
BUG_ON(pr->acpi_id >= NR_ACPI_CPUS);
if (processor_device_array[pr->acpi_id] != NULL &&
processor_device_array[pr->acpi_id] != device) {
#endif
printk(KERN_WARNING "BIOS reported wrong ACPI id "
"for the processor\n");
result = -ENODEV;
goto err_free_cpumask;
}
#ifndef CONFIG_XEN
per_cpu(processor_device_array, pr->id) = device;
per_cpu(processors, pr->id) = pr;
#else
processor_device_array[pr->acpi_id] = device;
if (pr->id != -1)
per_cpu(processors, pr->id) = pr;
#endif
result = acpi_processor_add_fs(device);
if (result)
goto err_free_cpumask;
if (pr->id != -1) {
sysdev = get_cpu_sysdev(pr->id);
if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
result = -EFAULT;
goto err_remove_fs;
}
}
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
arch_acpi_processor_cleanup_pdc(pr);
#if defined(CONFIG_CPU_FREQ) || defined(CONFIG_PROCESSOR_EXTERNAL_CONTROL)
acpi_processor_ppc_has_changed(pr);
#endif
/*
* pr->id may equal to -1 while processor_cntl_external enabled.
* throttle and thermal module don't support this case.
* Tx only works when dom0 vcpu == pcpu num by far, as we give
* control to dom0.
*/
if (pr->id != -1) {
acpi_processor_get_throttling_info(pr);
acpi_processor_get_limit_info(pr);
}
acpi_processor_power_init(pr, device);
result = processor_extcntl_prepare(pr);
if (result)
goto err_power_exit;
pr->cdev = thermal_cooling_device_register("Processor", device,
&processor_cooling_ops);
if (IS_ERR(pr->cdev)) {
result = PTR_ERR(pr->cdev);
goto err_power_exit;
}
dev_info(&device->dev, "registered as cooling_device%d\n",
pr->cdev->id);
result = sysfs_create_link(&device->dev.kobj,
&pr->cdev->device.kobj,
"thermal_cooling");
if (result) {
printk(KERN_ERR PREFIX "Create sysfs link\n");
goto err_thermal_unregister;
}
result = sysfs_create_link(&pr->cdev->device.kobj,
&device->dev.kobj,
"device");
if (result) {
printk(KERN_ERR PREFIX "Create sysfs link\n");
goto err_remove_sysfs;
}
return 0;
err_remove_sysfs:
sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
err_thermal_unregister:
thermal_cooling_device_unregister(pr->cdev);
err_power_exit:
acpi_processor_power_exit(pr, device);
err_remove_fs:
acpi_processor_remove_fs(device);
err_free_cpumask:
free_cpumask_var(pr->throttling.shared_cpu_map);
return result;
}
static int acpi_processor_remove(struct acpi_device *device, int type)
{
struct acpi_processor *pr = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
pr = acpi_driver_data(device);
if (!processor_cntl_external() && pr->id >= nr_cpu_ids)
goto free;
if (type == ACPI_BUS_REMOVAL_EJECT) {
if (acpi_processor_handle_eject(pr))
return -EINVAL;
}
acpi_processor_power_exit(pr, device);
if (pr->id != -1)
sysfs_remove_link(&device->dev.kobj, "sysdev");
acpi_processor_remove_fs(device);
if (pr->cdev) {
sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
sysfs_remove_link(&pr->cdev->device.kobj, "device");
thermal_cooling_device_unregister(pr->cdev);
pr->cdev = NULL;
}
#ifndef CONFIG_XEN
per_cpu(processors, pr->id) = NULL;
per_cpu(processor_device_array, pr->id) = NULL;
#else
if (pr->id != -1)
per_cpu(processors, pr->id) = NULL;
processor_device_array[pr->acpi_id] = NULL;
#endif
free:
free_cpumask_var(pr->throttling.shared_cpu_map);
kfree(pr);
return 0;
}
#ifdef CONFIG_ACPI_HOTPLUG_CPU
/****************************************************************************
* Acpi processor hotplug support *
****************************************************************************/
static int is_processor_present(acpi_handle handle)
{
acpi_status status;
unsigned long long sta = 0;
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
return 1;
/*
* _STA is mandatory for a processor that supports hot plug
*/
if (status == AE_NOT_FOUND)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Processor does not support hot plug\n"));
else
ACPI_EXCEPTION((AE_INFO, status,
"Processor Device is not present"));
return 0;
}
static int acpi_processor_start(struct acpi_device *device)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_processor *pr;
processor_extcntl_init();
pr = acpi_driver_data(device);
result = acpi_processor_get_info(pr);
if (result ||
((pr->id == -1) && !processor_cntl_external())) {
/* Processor is physically not present */
return 0;
}
BUG_ON(!processor_cntl_external() &&
((pr->id >= NR_CPUS) || (pr->id < 0)));
/*
* Buggy BIOS check
* ACPI id of processors can be reported wrongly by the BIOS.
* Don't trust it blindly
*/
#ifdef CONFIG_XEN
BUG_ON(pr->acpi_id >= NR_ACPI_CPUS);
if (processor_device_array[pr->acpi_id] != NULL &&
processor_device_array[pr->acpi_id] != (void *)device) {
#else
if (processor_device_array[pr->id] != NULL &&
processor_device_array[pr->id] != (void *)device) {
#endif /* CONFIG_XEN */
printk(KERN_WARNING "BIOS reported wrong ACPI id"
"for the processor\n");
return -ENODEV;
}
#ifdef CONFIG_XEN
processor_device_array[pr->acpi_id] = (void *)device;
if (pr->id != -1)
processors[pr->id] = pr;
#else
processor_device_array[pr->id] = (void *)device;
processors[pr->id] = pr;
#endif /* CONFIG_XEN */
result = acpi_processor_add_fs(device);
if (result)
goto end;
status = acpi_install_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify, pr);
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
#if defined(CONFIG_CPU_FREQ) || defined(CONFIG_PROCESSOR_EXTERNAL_CONTROL)
acpi_processor_ppc_has_changed(pr);
#endif
/*
* pr->id may equal to -1 while processor_cntl_external enabled.
* throttle and thermal module don't support this case.
* Tx only works when dom0 vcpu == pcpu num by far, as we give
* control to dom0.
*/
if (pr->id != -1) {
acpi_processor_get_throttling_info(pr);
acpi_processor_get_limit_info(pr);
}
acpi_processor_power_init(pr, device);
result = processor_extcntl_prepare(pr);
if (result)
goto end;
if (pr->flags.throttling) {
printk(KERN_INFO PREFIX "%s [%s] (supports",
acpi_device_name(device), acpi_device_bid(device));
printk(" %d throttling states", pr->throttling.state_count);
printk(")\n");
}
end:
return result;
}
static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
{
struct acpi_processor *pr = (struct acpi_processor *)data;
struct acpi_device *device = NULL;
if (!pr)
return;
if (acpi_bus_get_device(pr->handle, &device))
return;
switch (event) {
case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
acpi_processor_ppc_has_changed(pr);
acpi_bus_generate_event(device, event,
pr->performance_platform_limit);
break;
case ACPI_PROCESSOR_NOTIFY_POWER:
acpi_processor_cst_has_changed(pr);
acpi_bus_generate_event(device, event, 0);
break;
case ACPI_PROCESSOR_NOTIFY_THROTTLING:
acpi_processor_tstate_has_changed(pr);
acpi_bus_generate_event(device, event, 0);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
return;
}
static int acpi_processor_add(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
if (!device)
return -EINVAL;
pr = kmalloc(sizeof(struct acpi_processor), GFP_KERNEL);
if (!pr)
return -ENOMEM;
memset(pr, 0, sizeof(struct acpi_processor));
pr->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
acpi_driver_data(device) = pr;
return 0;
}
static int acpi_processor_remove(struct acpi_device *device, int type)
{
acpi_status status = AE_OK;
struct acpi_processor *pr = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
pr = (struct acpi_processor *)acpi_driver_data(device);
if (!processor_cntl_external() && pr->id >= NR_CPUS) {
kfree(pr);
return 0;
}
if (type == ACPI_BUS_REMOVAL_EJECT) {
if (acpi_processor_handle_eject(pr))
return -EINVAL;
}
acpi_processor_power_exit(pr, device);
status = acpi_remove_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY,
acpi_processor_notify);
acpi_processor_remove_fs(device);
#ifdef CONFIG_XEN
if (pr->id != -1)
processors[pr->id] = NULL;
#else
processors[pr->id] = NULL;
#endif /* CONFIG_XEN */
kfree(pr);
return 0;
}