static int __devexit pm8058_othc_remove(struct platform_device *pd)
{
struct pm8058_othc *dd = platform_get_drvdata(pd);
pm_runtime_set_suspended(&pd->dev);
pm_runtime_disable(&pd->dev);
if (dd->othc_pdata->micbias_capability == OTHC_MICBIAS_HSED) {
device_init_wakeup(&pd->dev, 0);
if (dd->othc_support_n_switch == true) {
adc_channel_close(dd->adc_handle);
cancel_work_sync(&dd->switch_work);
}
if (dd->accessory_support == true) {
int i;
for (i = 0; i < dd->num_accessories; i++) {
if (dd->accessory_info[i].detect_flags &
OTHC_GPIO_DETECT)
gpio_free(dd->accessory_info[i].gpio);
}
}
cancel_delayed_work_sync(&dd->detect_work);
free_irq(dd->othc_irq_sw, dd);
free_irq(dd->othc_irq_ir, dd);
input_unregister_device(dd->othc_ipd);
}
kfree(dd);
return 0;
}
static int __devexit pmic8058_tm_remove(struct platform_device *pdev)
{
struct pm8058_tm_device *tmdev = platform_get_drvdata(pdev);
thermal_zone_device_unregister(tmdev->tz_dev);
platform_set_drvdata(pdev, tmdev->pm_chip);
pm8058_tm_shutdown_override(tmdev->pm_chip, THERMAL_DEVICE_DISABLED);
adc_channel_close(tmdev->adc_handle);
free_irq(tmdev->irq, tmdev);
kfree(tmdev);
return 0;
}
static int isl_read_adc(int channel, int *mv_reading)
{
int ret;
void *h;
struct adc_chan_result adc_chan_result;
struct completion conv_complete_evt;
pr_debug("%s: called for %d\n", __func__, channel);
ret = adc_channel_open(channel, &h);
if (ret) {
pr_err("%s: couldnt open channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
init_completion(&conv_complete_evt);
ret = adc_channel_request_conv(h, &conv_complete_evt);
if (ret) {
pr_err("%s: couldnt request conv channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
ret = wait_for_completion_interruptible(&conv_complete_evt);
if (ret) {
pr_err("%s: wait interrupted channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
ret = adc_channel_read_result(h, &adc_chan_result);
if (ret) {
pr_err("%s: couldnt read result channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
ret = adc_channel_close(h);
if (ret)
pr_err("%s: couldnt close channel %d ret=%d\n",
__func__, channel, ret);
if (mv_reading)
*mv_reading = (int)adc_chan_result.measurement;
pr_debug("%s: done for %d\n", __func__, channel);
return adc_chan_result.physical;
out:
*mv_reading = 0;
pr_debug("%s: done with error for %d\n", __func__, channel);
return -EINVAL;
}
static int check_analog_mpp(int channel,int *mv_reading) // read adc value
{
int ret;
void *h;
struct adc_chan_result adc_chan_result;
struct completion conv_complete_evt;
dbg_func_in();
ret = adc_channel_open(channel, &h);
if (ret) {
pr_err("%s: couldnt open channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
init_completion(&conv_complete_evt);
ret = adc_channel_request_conv(h, &conv_complete_evt);
if (ret) {
pr_err("%s: couldnt request conv channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
wait_for_completion(&conv_complete_evt);
ret = adc_channel_read_result(h, &adc_chan_result);
if (ret) {
pr_err("%s: couldnt read result channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
ret = adc_channel_close(h);
if (ret) {
pr_err("%s: couldnt close channel %d ret=%d\n",
__func__, channel, ret);
}
if (mv_reading)
*mv_reading = adc_chan_result.measurement;
pr_debug("%s: done for %d\n", __func__, channel);
dbg_func_out();
return adc_chan_result.physical;
out:
pr_debug("%s: done for %d\n", __func__, channel);
return -EINVAL;
}
static int __devinit pmic8058_tm_probe(struct platform_device *pdev)
{
DECLARE_COMPLETION_ONSTACK(wait);
struct pm8058_tm_device *tmdev;
struct pm8058_chip *pm_chip;
unsigned int irq;
int rc;
pm_chip = platform_get_drvdata(pdev);
if (pm_chip == NULL) {
pr_err("%s: no driver data passed in.\n", __func__);
return -EFAULT;
}
irq = platform_get_irq(pdev, 0);
if (!irq) {
pr_err("%s: no IRQ passed in.\n", __func__);
return -EFAULT;
}
tmdev = kzalloc(sizeof *tmdev, GFP_KERNEL);
if (tmdev == NULL) {
pr_err("%s: kzalloc() failed.\n", __func__);
return -ENOMEM;
}
rc = adc_channel_open(PM8058_TEMP_ADC_CH, &(tmdev->adc_handle));
if (rc < 0) {
pr_err("%s: adc_channel_open() failed.\n", __func__);
kfree(tmdev);
return rc;
}
/* calibrate the die temperature sensor */
if (adc_calib_request(tmdev->adc_handle, &wait) == CALIB_STARTED)
wait_for_completion(&wait);
tmdev->pm_chip = pm_chip;
tmdev->tz_dev = thermal_zone_device_register("pm8058_tz",
PM8058_TRIP_NUM, tmdev,
&pm8058_thermal_zone_ops,
0, 0, 0, 0);
if (tmdev->tz_dev == NULL) {
pr_err("%s: thermal_zone_device_register() failed.\n",
__func__);
adc_channel_close(tmdev->adc_handle);
kfree(tmdev);
return -ENODEV;
}
rc = pm8058_tm_init_reg(tmdev);
pm8058_tm_shutdown_override(tmdev->pm_chip, SOFTWARE_OVERRIDE_DISABLED);
if (rc < 0) {
thermal_zone_device_unregister(tmdev->tz_dev);
adc_channel_close(tmdev->adc_handle);
kfree(tmdev);
return rc;
}
/* start in HW control, switch to SW control when user changes mode */
tmdev->mode = THERMAL_DEVICE_DISABLED;
thermal_zone_device_update(tmdev->tz_dev);
platform_set_drvdata(pdev, tmdev);
rc = request_threaded_irq(irq, NULL, pm8058_tm_isr,
IRQF_TRIGGER_RISING | IRQF_DISABLED,
"pm8058-tm-irq", tmdev);
if (rc < 0) {
pr_err("%s: request_irq(%d) FAIL: %d\n", __func__, irq, rc);
thermal_zone_device_unregister(tmdev->tz_dev);
platform_set_drvdata(pdev, tmdev->pm_chip);
adc_channel_close(tmdev->adc_handle);
kfree(tmdev);
return rc;
}
tmdev->irq = irq;
pr_notice("%s: OK\n", __func__);
return 0;
}
static int pm8xxx_tz_get_temp_pm8058_adc(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
DECLARE_COMPLETION_ONSTACK(wait);
struct adc_chan_result adc_result = {
.physical = 0lu,
};
int rc;
if (!chip || !temp)
return -EINVAL;
*temp = chip->temp;
rc = adc_channel_request_conv(chip->adc_handle, &wait);
if (rc < 0) {
pr_err("%s: adc_channel_request_conv() failed, rc = %d\n",
__func__, rc);
return rc;
}
wait_for_completion(&wait);
rc = adc_channel_read_result(chip->adc_handle, &adc_result);
if (rc < 0) {
pr_err("%s: adc_channel_read_result() failed, rc = %d\n",
__func__, rc);
return rc;
}
*temp = adc_result.physical;
chip->temp = adc_result.physical;
return 0;
}
static int pm8xxx_tz_get_temp_pm8xxx_adc(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
struct pm8xxx_adc_chan_result result = {
.physical = 0lu,
};
int rc;
if (!chip || !temp)
return -EINVAL;
*temp = chip->temp;
rc = pm8xxx_adc_read(chip->cdata.adc_channel, &result);
if (rc < 0) {
pr_err("%s: adc_channel_read_result() failed, rc = %d\n",
chip->cdata.tm_name, rc);
return rc;
}
*temp = result.physical;
chip->temp = result.physical;
return 0;
}
static int pm8xxx_tz_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
if (!chip || !mode)
return -EINVAL;
*mode = chip->mode;
return 0;
}
static int pm8xxx_tz_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
if (!chip)
return -EINVAL;
/* Mask software override requests if they are not allowed. */
if (!chip->cdata.allow_software_override)
mode = THERMAL_DEVICE_DISABLED;
if (mode != chip->mode) {
if (mode == THERMAL_DEVICE_ENABLED)
pm8xxx_tm_shutdown_override(chip,
SOFTWARE_OVERRIDE_ENABLED);
else
pm8xxx_tm_shutdown_override(chip,
SOFTWARE_OVERRIDE_DISABLED);
}
chip->mode = mode;
return 0;
}
static int pm8xxx_tz_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
{
if (trip < 0 || !type)
return -EINVAL;
switch (trip) {
case TRIP_STAGE3:
*type = THERMAL_TRIP_CRITICAL;
break;
case TRIP_STAGE2:
*type = THERMAL_TRIP_HOT;
break;
case TRIP_STAGE1:
*type = THERMAL_TRIP_HOT;
break;
default:
return -EINVAL;
}
return 0;
}
static int pm8xxx_tz_get_trip_temp(struct thermal_zone_device *thermal,
int trip, unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
int thresh_temp;
if (!chip || trip < 0 || !temp)
return -EINVAL;
thresh_temp = chip->thresh * TEMP_THRESH_STEP +
TEMP_THRESH_MIN;
switch (trip) {
case TRIP_STAGE3:
thresh_temp += 2 * TEMP_STAGE_STEP;
break;
case TRIP_STAGE2:
thresh_temp += TEMP_STAGE_STEP;
break;
case TRIP_STAGE1:
break;
default:
return -EINVAL;
}
*temp = thresh_temp;
return 0;
}
static int pm8xxx_tz_get_crit_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
if (!chip || !temp)
return -EINVAL;
*temp = chip->thresh * TEMP_THRESH_STEP + TEMP_THRESH_MIN +
2 * TEMP_STAGE_STEP;
return 0;
}
static struct thermal_zone_device_ops pm8xxx_thermal_zone_ops_no_adc = {
.get_temp = pm8xxx_tz_get_temp_no_adc,
.get_mode = pm8xxx_tz_get_mode,
.set_mode = pm8xxx_tz_set_mode,
.get_trip_type = pm8xxx_tz_get_trip_type,
.get_trip_temp = pm8xxx_tz_get_trip_temp,
.get_crit_temp = pm8xxx_tz_get_crit_temp,
};
static struct thermal_zone_device_ops pm8xxx_thermal_zone_ops_pm8xxx_adc = {
.get_temp = pm8xxx_tz_get_temp_pm8xxx_adc,
.get_mode = pm8xxx_tz_get_mode,
.set_mode = pm8xxx_tz_set_mode,
.get_trip_type = pm8xxx_tz_get_trip_type,
.get_trip_temp = pm8xxx_tz_get_trip_temp,
.get_crit_temp = pm8xxx_tz_get_crit_temp,
};
static struct thermal_zone_device_ops pm8xxx_thermal_zone_ops_pm8058_adc = {
.get_temp = pm8xxx_tz_get_temp_pm8058_adc,
.get_mode = pm8xxx_tz_get_mode,
.set_mode = pm8xxx_tz_set_mode,
.get_trip_type = pm8xxx_tz_get_trip_type,
.get_trip_temp = pm8xxx_tz_get_trip_temp,
.get_crit_temp = pm8xxx_tz_get_crit_temp,
};
static void pm8xxx_tm_work(struct work_struct *work)
{
struct delayed_work *dwork
= container_of(work, struct delayed_work, work);
struct pm8xxx_tm_chip *chip
= container_of(dwork, struct pm8xxx_tm_chip, irq_work);
unsigned long temp = 0;
int rc, stage, thresh;
u8 reg;
rc = pm8xxx_tm_read_ctrl(chip, ®);
if (rc < 0)
goto bail;
/* Clear status bits. */
if (reg & (TEMP_ALARM_CTRL_ST2_SD | TEMP_ALARM_CTRL_ST3_SD)) {
reg &= ~(TEMP_ALARM_CTRL_ST2_SD | TEMP_ALARM_CTRL_ST3_SD
| TEMP_ALARM_CTRL_STATUS_MASK);
pm8xxx_tm_write_ctrl(chip, reg);
}
stage = (reg & TEMP_ALARM_CTRL_STATUS_MASK)
>> TEMP_ALARM_CTRL_STATUS_SHIFT;
thresh = (reg & TEMP_ALARM_CTRL_THRESH_MASK)
>> TEMP_ALARM_CTRL_THRESH_SHIFT;
thermal_zone_device_update(chip->tz_dev);
if (stage != chip->prev_stage) {
chip->prev_stage = stage;
switch (chip->cdata.adc_type) {
case PM8XXX_TM_ADC_NONE:
rc = pm8xxx_tz_get_temp_no_adc(chip->tz_dev, &temp);
break;
case PM8XXX_TM_ADC_PM8058_ADC:
rc = pm8xxx_tz_get_temp_pm8058_adc(chip->tz_dev, &temp);
break;
case PM8XXX_TM_ADC_PM8XXX_ADC:
rc = pm8xxx_tz_get_temp_pm8xxx_adc(chip->tz_dev, &temp);
break;
}
if (rc < 0)
goto bail;
pr_crit("%s: PMIC Temp Alarm - stage=%u, threshold=%u, temp=%lu mC\n",
chip->cdata.tm_name, stage, thresh, temp);
/* Notify user space */
sysfs_notify(&chip->tz_dev->device.kobj, NULL, "type");
}
bail:
return;
}
static irqreturn_t pm8xxx_tm_isr(int irq, void *data)
{
struct pm8xxx_tm_chip *chip = data;
schedule_delayed_work(&chip->irq_work,
msecs_to_jiffies(STATUS_REGISTER_DELAY_MS) + 1);
return IRQ_HANDLED;
}
static int pm8xxx_tm_init_reg(struct pm8xxx_tm_chip *chip)
{
int rc;
u8 reg;
rc = pm8xxx_tm_read_ctrl(chip, ®);
if (rc < 0)
return rc;
chip->stage = (reg & TEMP_ALARM_CTRL_STATUS_MASK)
>> TEMP_ALARM_CTRL_STATUS_SHIFT;
chip->temp = 0;
/* Use temperature threshold set 0: (105, 125, 145) */
chip->thresh = 0;
reg = (chip->thresh << TEMP_ALARM_CTRL_THRESH_SHIFT)
& TEMP_ALARM_CTRL_THRESH_MASK;
rc = pm8xxx_tm_write_ctrl(chip, reg);
if (rc < 0)
return rc;
/*
* Set the PMIC temperature alarm module to be always on. This ensures
* that die temperature monitoring is active even if CXO is disabled
* (i.e. when sleep_b is low). This is necessary since CXO can be
* disabled while the system is still heavily loaded. Also, using
* the alway-on instead of PWM-enabled configurations ensures that the
* die temperature can be measured by the PMIC ADC without reconfiguring
* the temperature alarm module first.
*/
rc = pm8xxx_tm_write_pwm(chip, TEMP_ALARM_PWM_EN_ALWAYS);
return rc;
}
static int pm8xxx_init_adc(struct pm8xxx_tm_chip *chip, bool enable)
{
int rc = 0;
if (chip->cdata.adc_type == PM8XXX_TM_ADC_PM8058_ADC) {
if (enable) {
rc = adc_channel_open(chip->cdata.adc_channel,
&(chip->adc_handle));
if (rc < 0)
pr_err("adc_channel_open() failed.\n");
} else {
adc_channel_close(chip->adc_handle);
}
}
return rc;
}
static int batt_read_adc(int channel, int *mv_reading)
{
int ret;
void *h;
struct adc_chan_result adc_chan_result;
struct completion conv_complete_evt;
#ifdef CONFIG_LGE_PM
int wait_ret;
#endif
pr_debug("%s: called for %d\n", __func__, channel);
ret = adc_channel_open(channel, &h);
if (ret) {
pr_err("%s: couldnt open channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
init_completion(&conv_complete_evt);
ret = adc_channel_request_conv(h, &conv_complete_evt);
if (ret) {
pr_err("%s: couldnt request conv channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
#ifdef CONFIG_LGE_PM
wait_ret = wait_for_completion_timeout(&conv_complete_evt, msecs_to_jiffies(MSM_PMIC_ADC_READ_TIMEOUT));
if(wait_ret <= 0)
{
printk(KERN_ERR "===%s: failed to adc wait for completion!===\n",__func__);
goto sanity_out;
}
#else
wait_for_completion(&conv_complete_evt);
#endif
ret = adc_channel_read_result(h, &adc_chan_result);
if (ret) {
pr_err("%s: couldnt read result channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
ret = adc_channel_close(h);
if (ret) {
pr_err("%s: couldnt close channel %d ret=%d\n",
__func__, channel, ret);
}
if (mv_reading)
*mv_reading = adc_chan_result.measurement;
pr_debug("%s: done for %d\n", __func__, channel);
return adc_chan_result.physical;
out:
pr_debug("%s: done for %d\n", __func__, channel);
return -EINVAL;
#ifdef CONFIG_LGE_PM
sanity_out:
pm8058_xoadc_clear_recentQ();
ret = adc_channel_close(h);
if (ret) {
pr_err("%s: couldnt close channel %d ret=%d\n",
__func__, channel, ret);
}
if(channel == CHANNEL_ADC_BATT_THERM)
{
printk(KERN_ERR "============== batt temp adc read fail so default temp ===============\n");
if (mv_reading)
*mv_reading = MSM_CHARGER_GAUGE_MISSING_TEMP_ADC;
return MSM_CHARGER_GAUGE_MISSING_TEMP;
}
else if(channel == CHANNEL_ADC_ACC)
{
printk(KERN_ERR "============== ACC adc read fail so default usb ===============\n");
return CHANNEL_ADC_ACC_MISSING;
}
else
{
printk(KERN_ERR "============== adc read fail ===============\n");
return -EINVAL;
}
#endif
}
u32 lightsensor_get_adc(int channel)
{
int ret;
void *h;
struct adc_chan_result adc_chan_result;
struct completion conv_complete_evt;
#ifdef CONFIG_SEC_DEBUG_PM8058_ADC
static int retry_cnt;
#endif
pr_debug("%s: called for %d\n", __func__, channel);
ret = adc_channel_open(channel, &h);
if (ret) {
pr_err("%s: couldnt open channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
init_completion(&conv_complete_evt);
ret = adc_channel_request_conv(h, &conv_complete_evt);
if (ret) {
pr_err("%s: couldnt request conv channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
ret = wait_for_completion_interruptible_timeout(&conv_complete_evt, 5*HZ);
if (!ret) {
pr_err("%s: wait interrupted channel %d ret=%d\n",
__func__, channel, ret);
#ifdef CONFIG_SEC_DEBUG_PM8058_ADC_VERBOSE
adc_dbg_info_timer(0);
#else
pm8058_xoadc_clear_recentQ();
#ifdef CONFIG_SEC_DEBUG_PM8058_ADC
if(retry_cnt++ >= 10)
adc_dbg_info_timer(0);
#endif
#endif
goto out;
}
#ifdef CONFIG_SEC_DEBUG_PM8058_ADC
retry_cnt = 0;
#endif
ret = adc_channel_read_result(h, &adc_chan_result);
if (ret) {
pr_err("%s: couldnt read result channel %d ret=%d\n",
__func__, channel, ret);
goto out;
}
ret = adc_channel_close(h);
if (ret) {
pr_err("%s: couldnt close channel %d ret=%d\n",
__func__, channel, ret);
}
pr_debug("%s: done for %d\n", __func__, channel);
// return adc_chan_result.physical;
return adc_chan_result.measurement;
out:
pr_debug("%s: done for %d\n", __func__, channel);
return -EINVAL;
}
static int pm8xxx_tz_get_temp_pm8058_adc(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
DECLARE_COMPLETION_ONSTACK(wait);
struct adc_chan_result adc_result = {
.physical = 0lu,
};
int rc;
if (!chip || !temp)
return -EINVAL;
*temp = chip->temp;
rc = adc_channel_request_conv(chip->adc_handle, &wait);
if (rc < 0) {
pr_err("%s: adc_channel_request_conv() failed, rc = %d\n",
__func__, rc);
return rc;
}
wait_for_completion(&wait);
rc = adc_channel_read_result(chip->adc_handle, &adc_result);
if (rc < 0) {
pr_err("%s: adc_channel_read_result() failed, rc = %d\n",
__func__, rc);
return rc;
}
*temp = adc_result.physical;
chip->temp = adc_result.physical;
return 0;
}
static int pm8xxx_tz_get_temp_pm8xxx_adc(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
struct pm8xxx_adc_chan_result result = {
.physical = 0lu,
};
int rc;
if (!chip || !temp)
return -EINVAL;
*temp = chip->temp;
rc = pm8xxx_adc_read(chip->cdata.adc_channel, &result);
if (rc < 0) {
pr_err("%s: adc_channel_read_result() failed, rc = %d\n",
chip->cdata.tm_name, rc);
return rc;
}
*temp = result.physical;
chip->temp = result.physical;
return 0;
}
static int pm8xxx_tz_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
if (!chip || !mode)
return -EINVAL;
*mode = chip->mode;
return 0;
}
static int pm8xxx_tz_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
if (!chip)
return -EINVAL;
if (mode != chip->mode) {
if (mode == THERMAL_DEVICE_ENABLED)
pm8xxx_tm_shutdown_override(chip,
SOFTWARE_OVERRIDE_ENABLED);
else
pm8xxx_tm_shutdown_override(chip,
SOFTWARE_OVERRIDE_DISABLED);
}
chip->mode = mode;
return 0;
}
static int pm8xxx_tz_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
{
if (trip < 0 || !type)
return -EINVAL;
switch (trip) {
case TRIP_STAGE3:
*type = THERMAL_TRIP_CRITICAL;
break;
case TRIP_STAGE2:
*type = THERMAL_TRIP_HOT;
break;
case TRIP_STAGE1:
*type = THERMAL_TRIP_HOT;
break;
default:
return -EINVAL;
}
return 0;
}
static int pm8xxx_tz_get_trip_temp(struct thermal_zone_device *thermal,
int trip, unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
int thresh_temp;
if (!chip || trip < 0 || !temp)
return -EINVAL;
thresh_temp = chip->thresh * TEMP_THRESH_STEP +
TEMP_THRESH_MIN;
switch (trip) {
case TRIP_STAGE3:
thresh_temp += 2 * TEMP_STAGE_STEP;
break;
case TRIP_STAGE2:
thresh_temp += TEMP_STAGE_STEP;
break;
case TRIP_STAGE1:
break;
default:
return -EINVAL;
}
*temp = thresh_temp;
return 0;
}
static int pm8xxx_tz_get_crit_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct pm8xxx_tm_chip *chip = thermal->devdata;
if (!chip || !temp)
return -EINVAL;
*temp = chip->thresh * TEMP_THRESH_STEP + TEMP_THRESH_MIN +
2 * TEMP_STAGE_STEP;
return 0;
}
static struct thermal_zone_device_ops pm8xxx_thermal_zone_ops_no_adc = {
.get_temp = pm8xxx_tz_get_temp_no_adc,
.get_mode = pm8xxx_tz_get_mode,
.set_mode = pm8xxx_tz_set_mode,
.get_trip_type = pm8xxx_tz_get_trip_type,
.get_trip_temp = pm8xxx_tz_get_trip_temp,
.get_crit_temp = pm8xxx_tz_get_crit_temp,
};
static struct thermal_zone_device_ops pm8xxx_thermal_zone_ops_pm8xxx_adc = {
.get_temp = pm8xxx_tz_get_temp_pm8xxx_adc,
.get_mode = pm8xxx_tz_get_mode,
.set_mode = pm8xxx_tz_set_mode,
.get_trip_type = pm8xxx_tz_get_trip_type,
.get_trip_temp = pm8xxx_tz_get_trip_temp,
.get_crit_temp = pm8xxx_tz_get_crit_temp,
};
static struct thermal_zone_device_ops pm8xxx_thermal_zone_ops_pm8058_adc = {
.get_temp = pm8xxx_tz_get_temp_pm8058_adc,
.get_mode = pm8xxx_tz_get_mode,
.set_mode = pm8xxx_tz_set_mode,
.get_trip_type = pm8xxx_tz_get_trip_type,
.get_trip_temp = pm8xxx_tz_get_trip_temp,
.get_crit_temp = pm8xxx_tz_get_crit_temp,
};
static void pm8xxx_tm_work(struct work_struct *work)
{
struct pm8xxx_tm_chip *chip
= container_of(work, struct pm8xxx_tm_chip, irq_work);
int rc;
u8 reg;
rc = pm8xxx_tm_read_ctrl(chip, ®);
if (rc < 0)
goto bail;
if (chip->cdata.adc_type == PM8XXX_TM_ADC_NONE) {
rc = pm8xxx_tm_update_temp_no_adc(chip);
if (rc < 0)
goto bail;
pr_info("%s: Temp Alarm - stage=%u, threshold=%u, "
"temp=%lu mC\n", chip->cdata.tm_name, chip->stage,
chip->thresh, chip->temp);
} else {
chip->stage = (reg & TEMP_ALARM_CTRL_STATUS_MASK)
>> TEMP_ALARM_CTRL_STATUS_SHIFT;
chip->thresh = (reg & TEMP_ALARM_CTRL_THRESH_MASK)
>> TEMP_ALARM_CTRL_THRESH_SHIFT;
pr_info("%s: Temp Alarm - stage=%u, threshold=%u\n",
chip->cdata.tm_name, chip->stage, chip->thresh);
}
/* Clear status bits. */
if (reg & (TEMP_ALARM_CTRL_ST2_SD | TEMP_ALARM_CTRL_ST3_SD)) {
reg &= ~(TEMP_ALARM_CTRL_ST2_SD | TEMP_ALARM_CTRL_ST3_SD
| TEMP_ALARM_CTRL_STATUS_MASK);
pm8xxx_tm_write_ctrl(chip, reg);
}
thermal_zone_device_update(chip->tz_dev);
/* Notify user space */
sysfs_notify(&chip->tz_dev->device.kobj, NULL, "type");
bail:
enable_irq(chip->tempstat_irq);
enable_irq(chip->overtemp_irq);
}
static irqreturn_t pm8xxx_tm_isr(int irq, void *data)
{
struct pm8xxx_tm_chip *chip = data;
disable_irq_nosync(chip->tempstat_irq);
disable_irq_nosync(chip->overtemp_irq);
schedule_work(&chip->irq_work);
return IRQ_HANDLED;
}
static int pm8xxx_tm_init_reg(struct pm8xxx_tm_chip *chip)
{
int rc;
u8 reg;
rc = pm8xxx_tm_read_ctrl(chip, ®);
if (rc < 0)
return rc;
chip->stage = (reg & TEMP_ALARM_CTRL_STATUS_MASK)
>> TEMP_ALARM_CTRL_STATUS_SHIFT;
chip->temp = 0;
/* Use temperature threshold set 0: (105, 125, 145) */
chip->thresh = 0;
reg = (chip->thresh << TEMP_ALARM_CTRL_THRESH_SHIFT)
& TEMP_ALARM_CTRL_THRESH_MASK;
rc = pm8xxx_tm_write_ctrl(chip, reg);
if (rc < 0)
return rc;
/*
* Set the PMIC alarm module PWM to have a frequency of 8 Hz. This
* helps cut down on the number of unnecessary interrupts fired when
* changing between thermal stages. Also, Enable the over temperature
* PWM whenever the PMIC is enabled.
*/
reg = (1 << TEMP_ALARM_PWM_EN_SHIFT)
| (3 << TEMP_ALARM_PWM_PER_PRE_SHIFT)
| (3 << TEMP_ALARM_PWM_PER_DIV_SHIFT);
rc = pm8xxx_tm_write_pwm(chip, reg);
return rc;
}
static int pm8xxx_init_adc(struct pm8xxx_tm_chip *chip, bool enable)
{
int rc = 0;
if (chip->cdata.adc_type == PM8XXX_TM_ADC_PM8058_ADC) {
if (enable) {
rc = adc_channel_open(chip->cdata.adc_channel,
&(chip->adc_handle));
if (rc < 0)
pr_err("adc_channel_open() failed.\n");
} else {
adc_channel_close(chip->adc_handle);
}
}
return rc;
}
static int Check_ADC_MPP(int *nValue) {
int err=0,ret=0,result=0;
void *h;
struct adc_chan_result adc_chan_result;
//long timeout=0;
struct completion conv_complete_evt;
struct pm8xxx_mpp_config_data sky_handset_analog_adc = {
.type = PM8XXX_MPP_TYPE_A_INPUT,
.level = PM8XXX_MPP_AIN_AMUX_CH5,
.control = PM8XXX_MPP_AOUT_CTRL_DISABLE,
};
mutex_lock(&headset_adc_lock);
ret=gpio_get_value_cansleep(hspd->ear_det);
if(ret!=hspd->ear_det_active) {
printk("EARJACK_DET %d\n",ret);
mutex_unlock(&headset_adc_lock);
return -1;
}
#if AT1_BDVER_GE(AT1_WS22)
if(hspd->curr_state == MSM_HEADSET) {
Remote_Interrupt_Enable(0);
msleep(1);
}
#endif
//sys_gpio= PM8901_GPIO_PM_TO_SYS(mpp);
//err=pm8058_mpp_config_analog_input(XOADC_MPP_3,PM_MPP_AIN_AMUX_CH5, PM_MPP_AOUT_CTL_DISABLE);
err = pm8xxx_mpp_config(PM8058_MPP_PM_TO_SYS(XOADC_MPP_3), &sky_handset_analog_adc);
if(err) {
printk("pm8058_mpp_config_analog_input() err=%d\n",err);
mutex_unlock(&headset_adc_lock);
return -1;
}
ret = adc_channel_open(CHANNEL_ADC_HDSET, &h);
if(ret) {
printk("couldn't open channel %d ret=%d\n",CHANNEL_ADC_HDSET,ret);
mutex_unlock(&headset_adc_lock);
return -1;
}
init_completion(&conv_complete_evt);
ret = adc_channel_request_conv(h, &conv_complete_evt);
if(ret) {
printk("couldn't request convert channel %d ret=%d\n",CHANNEL_ADC_HDSET,ret);
result=-2;
goto check_adc_out;
}
wait_for_completion(&conv_complete_evt);
/*
timeout=wait_for_completion_timeout(&conv_complete_evt,msecs_to_jiffies(100));
if(timeout<=0) {
printk("headset ADC timeout\n");
result=-3;
goto check_adc_out;
}
*/
ret = adc_channel_read_result(h, &adc_chan_result);
if(ret) {
printk("could't read result channel %d ret=%d\n",CHANNEL_ADC_HDSET,ret);
result=-4;
goto check_adc_out;
}
*nValue=(int)adc_chan_result.measurement;
check_adc_out:
ret = adc_channel_close(h);
if(ret) {
printk("could't close channel %d ret=%d\n",CHANNEL_ADC_HDSET,ret);
mutex_unlock(&headset_adc_lock);
return -1;
}
#if AT1_BDVER_GE(AT1_WS22)
if(hspd->curr_state == MSM_HEADSET) {
Remote_Interrupt_Enable(1);
}
#endif
//printk("ADC value=%d, physical=%d\n",(int)adc_chan_result.measurement,adc_chan_result.physical);
mutex_unlock(&headset_adc_lock);
return result;
}
static int semc_battery_read_adc(int channel, int *read_measurement,
int *read_physical)
{
struct power_supply *ps = power_supply_get_by_name(SEMC_BDATA_NAME);
struct data_info *di = container_of(ps, struct data_info, bdata_ps);
int ret;
void *h;
struct adc_chan_result adc_chan_result;
struct completion conv_complete_evt;
if (!read_measurement && !read_physical)
return -EINVAL;
dev_dbg(di->dev, "called for %d\n", channel);
ret = adc_channel_open(channel, &h);
if (ret) {
dev_err(di->dev, "couldnt open channel %d ret=%d\n",
channel, ret);
goto out;
}
init_completion(&conv_complete_evt);
ret = adc_channel_request_conv(h, &conv_complete_evt);
if (ret) {
dev_err(di->dev, "couldnt request conv channel %d ret=%d\n",
channel, ret);
adc_channel_close(h);
goto out;
}
ret = wait_for_completion_interruptible(&conv_complete_evt);
if (ret) {
dev_err(di->dev, "wait interrupted channel %d ret=%d\n",
channel, ret);
adc_channel_close(h);
goto out;
}
ret = adc_channel_read_result(h, &adc_chan_result);
if (ret) {
dev_err(di->dev, "couldnt read result channel %d ret=%d\n",
channel, ret);
adc_channel_close(h);
goto out;
}
ret = adc_channel_close(h);
if (ret)
dev_err(di->dev, "couldnt close channel %d ret=%d\n",
channel, ret);
if (read_measurement) {
*read_measurement = (int)adc_chan_result.measurement;
dev_dbg(di->dev, "done for %d measurement=%d\n",
channel, *read_measurement);
}
if (read_physical) {
*read_physical = adc_chan_result.physical;
dev_dbg(di->dev, "done for %d physical=%d\n",
channel, *read_physical);
}
return ret;
out:
dev_dbg(di->dev, "done for %d\n", channel);
return ret;
}
