static int msm_device_mute_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int dev_id = ucontrol->value.integer.value[0];
int mute = ucontrol->value.integer.value[1];
struct msm_snddev_info *dev_info;
int afe_dev_id = 0;
int volume = 0x4000;
dev_info = audio_dev_ctrl_find_dev(dev_id);
if (IS_ERR(dev_info)) {
MM_ERR("pass invalid dev_id %d\n", dev_id);
return PTR_ERR(dev_info);
}
if (dev_info->capability & SNDDEV_CAP_RX)
return -EPERM;
MM_DBG("Muting device id %d(%s)\n", dev_id, dev_info->name);
if (dev_info->copp_id == 0)
afe_dev_id = AFE_HW_PATH_CODEC_TX;
if (dev_info->copp_id == 1)
afe_dev_id = AFE_HW_PATH_AUXPCM_TX;
if (dev_info->copp_id == 2)
afe_dev_id = AFE_HW_PATH_MI2S_TX;
if (mute)
volume = 0;
afe_device_volume_ctrl(afe_dev_id, volume);
return 0;
}
static void debugfs_afe_loopback(u32 loop)
{
int trc;
struct msm_afe_config afe_config;
struct snddev_icodec_drv_state *drv = &snddev_icodec_drv;
struct lpa_codec_config lpa_config;
if (loop) {
/* Vote for SMPS mode*/
pmapp_smps_mode_vote(SMPS_AUDIO_PLAYBACK_ID,
PMAPP_VREG_S4, PMAPP_SMPS_MODE_VOTE_PWM);
/* enable MI2S RX master block */
/* enable MI2S RX bit clock */
trc = clk_set_rate(drv->rx_mclk,
SNDDEV_ICODEC_CLK_RATE(8000));
if (IS_ERR_VALUE(trc))
MM_ERR("failed to set clk rate\n");
clk_enable(drv->rx_mclk);
clk_enable(drv->rx_sclk);
clk_enable(drv->lpa_p_clk);
clk_enable(drv->lpa_codec_clk);
clk_enable(drv->lpa_core_clk);
/* Enable LPA sub system
*/
drv->lpa = lpa_get();
if (!drv->lpa)
MM_ERR("failed to enable lpa\n");
lpa_config.sample_rate = 8000;
lpa_config.sample_width = 16;
lpa_config.output_interface = LPA_OUTPUT_INTF_WB_CODEC;
lpa_config.num_channels = 1;
lpa_cmd_codec_config(drv->lpa, &lpa_config);
/* Set audio interconnect reg to LPA */
audio_interct_codec(AUDIO_INTERCT_LPA);
mi2s_set_codec_output_path(MI2S_CHAN_MONO_PACKED, WT_16_BIT);
MM_INFO("configure ADIE RX path\n");
/* Configure ADIE */
adie_codec_open(&debug_rx_profile, &debugfs_rx_adie);
adie_codec_setpath(debugfs_rx_adie, 8000, 256);
lpa_cmd_enable_codec(drv->lpa, 1);
/* Start AFE for RX */
afe_config.sample_rate = 0x8;
afe_config.channel_mode = 1;
afe_config.volume = AFE_VOLUME_UNITY;
MM_INFO("enable afe\n");
trc = afe_enable(AFE_HW_PATH_CODEC_RX, &afe_config);
if (IS_ERR_VALUE(trc))
MM_ERR("fail to enable afe RX\n");
adie_codec_proceed_stage(debugfs_rx_adie,
ADIE_CODEC_DIGITAL_READY);
adie_codec_proceed_stage(debugfs_rx_adie,
ADIE_CODEC_DIGITAL_ANALOG_READY);
/* Vote for PWM mode*/
pmapp_smps_mode_vote(SMPS_AUDIO_RECORD_ID,
PMAPP_VREG_S4, PMAPP_SMPS_MODE_VOTE_PWM);
MM_INFO("Enable Handset Mic bias\n");
pmic_hsed_enable(PM_HSED_CONTROLLER_0, PM_HSED_ENABLE_PWM_TCXO);
/* enable MI2S TX master block */
/* enable MI2S TX bit clock */
clk_set_rate(drv->tx_mclk,
SNDDEV_ICODEC_CLK_RATE(8000));
clk_enable(drv->tx_mclk);
clk_enable(drv->tx_sclk);
/* Set MI2S */
mi2s_set_codec_input_path(MI2S_CHAN_MONO_PACKED, WT_16_BIT);
MM_INFO("configure ADIE TX path\n");
/* Configure ADIE */
adie_codec_open(&debug_tx_profile, &debugfs_tx_adie);
adie_codec_setpath(debugfs_tx_adie, 8000, 256);
adie_codec_proceed_stage(debugfs_tx_adie,
ADIE_CODEC_DIGITAL_READY);
adie_codec_proceed_stage(debugfs_tx_adie,
ADIE_CODEC_DIGITAL_ANALOG_READY);
/* Start AFE for TX */
afe_config.sample_rate = 0x8;
afe_config.channel_mode = 1;
afe_config.volume = AFE_VOLUME_UNITY;
trc = afe_enable(AFE_HW_PATH_CODEC_TX, &afe_config);
if (IS_ERR_VALUE(trc))
MM_ERR("failed to enable AFE TX\n");
/* Set the volume level to non unity, to avoid
loopback effect */
afe_device_volume_ctrl(AFE_HW_PATH_CODEC_RX, 0x0500);
/* enable afe loopback */
afe_loopback(1);
MM_INFO("AFE loopback enabled\n");
} else {
/* disable afe loopback */
afe_loopback(0);
/* Remove the vote for SMPS mode*/
pmapp_smps_mode_vote(SMPS_AUDIO_PLAYBACK_ID,
PMAPP_VREG_S4, PMAPP_SMPS_MODE_VOTE_DONTCARE);
/* Disable ADIE */
adie_codec_proceed_stage(debugfs_rx_adie,
ADIE_CODEC_DIGITAL_OFF);
adie_codec_close(debugfs_rx_adie);
/* Disable AFE for RX */
afe_disable(AFE_HW_PATH_CODEC_RX);
/* Disable LPA Sub system */
lpa_cmd_enable_codec(drv->lpa, 0);
lpa_put(drv->lpa);
/* Disable LPA clocks */
clk_disable(drv->lpa_p_clk);
clk_disable(drv->lpa_codec_clk);
clk_disable(drv->lpa_core_clk);
/* Disable MI2S RX master block */
/* Disable MI2S RX bit clock */
clk_disable(drv->rx_sclk);
clk_disable(drv->rx_mclk);
pmapp_smps_mode_vote(SMPS_AUDIO_RECORD_ID,
PMAPP_VREG_S4, PMAPP_SMPS_MODE_VOTE_DONTCARE);
/* Disable AFE for TX */
afe_disable(AFE_HW_PATH_CODEC_TX);
/* Disable ADIE */
adie_codec_proceed_stage(debugfs_tx_adie,
ADIE_CODEC_DIGITAL_OFF);
adie_codec_close(debugfs_tx_adie);
/* Disable MI2S TX master block */
/* Disable MI2S TX bit clock */
clk_disable(drv->tx_sclk);
clk_disable(drv->tx_mclk);
pmic_hsed_enable(PM_HSED_CONTROLLER_0, PM_HSED_ENABLE_OFF);
MM_INFO("AFE loopback disabled\n");
}
}
static void bt_sco_set_loopback_mode(u32 loop)
{
int trc;
struct msm_afe_config afe_config;
struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;
MM_INFO("[BTUI] bt_sco_set_loopback_mode : %d \n", loop);
if(loop & 1)
{
/**********************************************************
* Aux PCM Common set up
***********************************************************/
/* request GPIO */
trc = aux_pcm_gpios_request();
if (trc)
{
MM_ERR("[BTUI] ###### GPIO enable failed\n");
}
/* config clocks */
clk_enable(drv->lpa_core_clk);
/* enable ecodec clk */
clk_enable(drv->ecodec_clk);
/* let ADSP confiure AUX PCM regs */
aux_codec_adsp_codec_ctl_en(ADSP_CTL);
/* let adsp configure pcm path */
aux_codec_pcm_path_ctl_en(ADSP_CTL);
/* choose ADSP_A */
audio_interct_aux_regsel(AUDIO_ADSP_A);
audio_interct_tpcm_source(AUDIO_ADSP_A);
audio_interct_rpcm_source(AUDIO_ADSP_A);
clk_disable(drv->lpa_core_clk);
/* send AUX_CODEC_CONFIG to AFE */
trc = afe_config_aux_codec(TESTMODE_HANDSET_PCM_CTL_VAL,TESTMODE_AUX_CODEC_INTF,TESTMODE_DATA_FORMAT_PADDING);
if (IS_ERR_VALUE(trc))
{
MM_ERR("[BTUI] ###### afe_config_aux_codec failed\n");
}
/**********************************************************
* Aux PCM Rx path set up
***********************************************************/
/* send CODEC CONFIG to AFE */
afe_config.sample_rate = 8;
afe_config.channel_mode = 1;
afe_config.volume = AFE_VOLUME_UNITY;
trc = afe_enable(AFE_HW_PATH_AUXPCM_RX, &afe_config);
if (IS_ERR_VALUE(trc)){
MM_ERR("[BTUI] ###### afe_enable failed\n");
}
/**********************************************************
* Aux PCM Tx path set up
***********************************************************/
/* send CODEC CONFIG to AFE */
afe_config.sample_rate = 8;
afe_config.channel_mode = 1;
afe_config.volume = AFE_VOLUME_UNITY;
trc = afe_enable(AFE_HW_PATH_AUXPCM_TX, &afe_config);
if (IS_ERR_VALUE(trc)) {
MM_ERR("[BTUI] ###### afe_enable tx failed\n");
}
/************************************************************************************
* Start LoopBack
*************************************************************************************/
/* Set the volume level to non unity, to avoid
loopback effect */
afe_device_volume_ctrl(AFE_HW_PATH_AUXPCM_RX, 0x0500);
lb_status = loop;
MM_INFO("[BTUI] bt_sco_set_loopback_mode : [ENABLED] \n");
afe_config_ext_pcm_loopback(0xFFFF);
}
else {
/*release GPIOs*/
aux_pcm_gpios_free();
afe_config_ext_pcm_loopback(0x0);
/*disable clocks*/
clk_disable(drv->ecodec_clk);
/*Disable afe configuration */
afe_disable(AFE_HW_PATH_AUXPCM_RX);
afe_disable(AFE_HW_PATH_AUXPCM_TX);
lb_status = 0;
MM_INFO("[BTUI] bt_sco_set_loopback_mode : [DISABLED] \n");
}
}
