void
NavierStokesApp::associateSyntax(Syntax & syntax, ActionFactory & action_factory)
{
#undef registerAction
#define registerAction(type, action) \
action_factory.reg<type>(stringifyName(type), action, __FILE__, __LINE__)
// Create the syntax
registerSyntax("AddNavierStokesVariablesAction", "Modules/NavierStokes/Variables");
registerSyntax("AddNavierStokesICsAction", "Modules/NavierStokes/ICs");
registerSyntax("AddNavierStokesKernelsAction", "Modules/NavierStokes/Kernels");
registerSyntax("AddNavierStokesBCsAction", "Modules/NavierStokes/BCs/*");
// add variables action
registerTask("add_navier_stokes_variables", /*is_required=*/false);
addTaskDependency("add_navier_stokes_variables", "add_variable");
registerAction(AddNavierStokesVariablesAction, "add_navier_stokes_variables");
// add ICs action
registerTask("add_navier_stokes_ics", /*is_required=*/false);
addTaskDependency("add_navier_stokes_ics", "add_ic");
registerAction(AddNavierStokesICsAction, "add_navier_stokes_ics");
// add Kernels action
registerTask("add_navier_stokes_kernels", /*is_required=*/false);
addTaskDependency("add_navier_stokes_kernels", "add_kernel");
registerAction(AddNavierStokesKernelsAction, "add_navier_stokes_kernels");
// add BCs actions
registerMooseObjectTask("add_navier_stokes_bcs", NSWeakStagnationInletBC, /*is_required=*/false);
appendMooseObjectTask("add_navier_stokes_bcs", NSNoPenetrationBC);
appendMooseObjectTask("add_navier_stokes_bcs", NSStaticPressureOutletBC);
addTaskDependency("add_navier_stokes_bcs", "add_bc");
registerAction(AddNavierStokesBCsAction, "add_navier_stokes_bcs");
#undef registerAction
#define registerAction(type, action) action_factory.regLegacy<type>(stringifyName(type), action)
}
void
addActionTypes(Syntax & syntax)
{
/**
* The second param here indicates whether the task must be satisfied or not for a successful run.
* If set to true, then the ActionWarehouse will attempt to create "Action"s automatically if they have
* not been explicitly created by the parser or some other mechanism.
*
* Note: Many of the actions in the "Minimal Problem" section are marked as false. However, we can generally
* force creation of these "Action"s as needed by registering them to syntax that we expect to see even
* if those "Action"s don't normally pick up parameters from the input file.
*/
/**************************/
/**** Register Actions ****/
/**************************/
registerMooseObjectTask("create_problem", Problem, true);
registerMooseObjectTask("setup_executioner", Executioner, true);
// This task does not construct an object, but it needs all of the parameters that
// would normally be used to construct an object.
registerMooseObjectTask("determine_system_type", Executioner, true);
registerMooseObjectTask("setup_mesh", MooseMesh, false);
registerMooseObjectTask("add_mesh_modifier", MeshModifier, false);
registerMooseObjectTask("add_kernel", Kernel, false);
appendMooseObjectTask ("add_kernel", EigenKernel);
registerMooseObjectTask("add_material", Material, false);
registerMooseObjectTask("add_bc", BoundaryCondition, false);
registerMooseObjectTask("add_function", Function, false);
registerMooseObjectTask("add_aux_kernel", AuxKernel, false);
registerMooseObjectTask("add_elemental_field_variable", AuxKernel, false);
registerMooseObjectTask("add_scalar_kernel", ScalarKernel, false);
registerMooseObjectTask("add_aux_scalar_kernel", AuxScalarKernel, false);
registerMooseObjectTask("add_dirac_kernel", DiracKernel, false);
registerMooseObjectTask("add_dg_kernel", DGKernel, false);
registerMooseObjectTask("add_constraint", Constraint, false);
registerMooseObjectTask("add_ic", InitialCondition, false);
appendMooseObjectTask ("add_ic", ScalarInitialCondition);
registerMooseObjectTask("add_damper", Damper, false);
registerMooseObjectTask("setup_predictor", Predictor, false);
registerMooseObjectTask("setup_time_stepper", TimeStepper, false);
registerMooseObjectTask("setup_time_integrator", TimeIntegrator, false);
registerMooseObjectTask("add_preconditioning", MoosePreconditioner, false);
registerMooseObjectTask("add_split", Split, false);
registerMooseObjectTask("add_user_object", UserObject, false);
appendMooseObjectTask ("add_user_object", Postprocessor);
registerMooseObjectTask("add_postprocessor", Postprocessor, false);
registerMooseObjectTask("add_vector_postprocessor", VectorPostprocessor, false);
registerMooseObjectTask("add_indicator", Indicator, false);
registerMooseObjectTask("add_marker", Marker, false);
registerMooseObjectTask("add_multi_app", MultiApp, false);
registerMooseObjectTask("add_transfer", Transfer, false);
registerMooseObjectTask("add_output", Output, false);
registerMooseObjectTask("add_control", Control, false);
registerTask("dynamic_object_registration", false);
registerTask("common_output", true);
registerTask("setup_recover_file_base", true);
registerTask("add_bounds_vectors", false);
registerTask("add_periodic_bc", false);
registerTask("add_aux_variable", false);
registerTask("add_variable", false);
registerTask("execute_mesh_modifiers", false);
registerTask("uniform_refine_mesh", false);
registerTask("prepare_mesh", false);
registerTask("setup_mesh_complete", false); // calls prepare
registerTask("init_displaced_problem", false);
registerTask("init_problem", true);
registerTask("check_copy_nodal_vars", true);
registerTask("copy_nodal_vars", true);
registerTask("copy_nodal_aux_vars", true);
registerTask("setup_postprocessor_data", false);
registerTask("setup_dampers", true);
registerTask("check_integrity", true);
registerTask("setup_quadrature", true);
/// Additional Actions
registerTask("no_action", false); // Used for Empty Action placeholders
registerTask("set_global_params", false);
registerTask("setup_time_periods", true);
registerTask("setup_adaptivity", false);
registerTask("meta_action", false);
registerTask("setup_debug", false);
registerTask("setup_residual_debug", false);
registerTask("setup_oversampling", false);
registerTask("deprecated_block", false);
registerTask("set_adaptivity_options", false);
registerTask("add_mortar_interface", false);
// Dummy Actions (useful for sync points in the dependencies)
registerTask("setup_function_complete", false);
registerTask("setup_variable_complete", false);
registerTask("ready_to_init", true);
// Output related actions
registerTask("setup_material_output", true);
registerTask("check_output", true);
/**************************/
/****** Dependencies ******/
/**************************/
/**
* The following is the default set of action dependencies for a basic MOOSE problem. The formatting
* of this string is important. Each line represents a set of dependencies that depend on the previous
* line. Items on the same line have equal weight and can be executed in any order.
*
* Additional dependencies can be inserted later inside of user applications with calls to
* ActionWarehouse::addDependency("task", "pre_req")
*/
syntax.addDependencySets(
"(meta_action)"
"(dynamic_object_registration)"
"(common_output)"
"(set_global_params)"
"(setup_recover_file_base)"
"(check_copy_nodal_vars)"
"(setup_mesh)"
"(prepare_mesh)"
"(add_mesh_modifier)"
"(add_mortar_interface)"
"(execute_mesh_modifiers)"
"(uniform_refine_mesh)"
"(setup_mesh_complete)"
"(determine_system_type)"
"(create_problem)"
"(setup_time_integrator)"
"(setup_executioner)"
"(setup_time_stepper)"
"(setup_predictor)"
"(setup_postprocessor_data)"
"(setup_time_periods)"
"(init_displaced_problem)"
"(add_aux_variable, add_variable, add_elemental_field_variable)"
"(setup_variable_complete)"
"(setup_quadrature)"
"(add_function)"
"(add_periodic_bc)"
"(add_user_object)"
"(setup_function_complete)"
"(setup_adaptivity)"
"(set_adaptivity_options)"
"(add_ic)"
"(add_preconditioning, add_constraint, add_split)"
"(ready_to_init)"
"(setup_dampers)"
"(setup_residual_debug)"
"(add_bounds_vectors)"
"(add_multi_app)"
"(add_transfer)"
"(copy_nodal_vars, copy_nodal_aux_vars)"
"(add_material)"
"(setup_material_output)"
"(init_problem)"
"(setup_debug)"
"(add_output)"
"(add_postprocessor)"
"(add_vector_postprocessor)"
"(add_aux_kernel, add_bc, add_damper, add_dirac_kernel, add_kernel, add_dg_kernel, add_scalar_kernel, add_aux_scalar_kernel, add_indicator, add_marker)"
"(add_control)"
"(check_output)"
"(check_integrity)"
);
}
void
addActionTypes(Syntax & syntax)
{
/**
* The (optional) last param here indicates whether the task should trigger an Action auto-build.
* If a task is marked as "true". Then MOOSE will attempt to build the associated Action if one is
* not supplied by some other means (usually through the input file or custom Action). Only
* Actions that do not have required parameters and have defaults for all optional parameters can
* be built automatically (See ActionWarehouse.C).
*
* Note: Many of the actions in the "Minimal Problem" section are marked as false. However, we
* can generally force creation of these "Action"s as needed by registering them to syntax that we
* expect to see even if those "Action"s don't normally pick up parameters from the input file.
*/
// clang-format off
/**************************/
/**** Register Actions ****/
/**************************/
registerMooseObjectTask("create_problem", Problem, false);
registerMooseObjectTask("setup_executioner", Executioner, false);
// This task does not construct an object, but it needs all of the parameters that
// would normally be used to construct an object.
registerMooseObjectTask("determine_system_type", Executioner, true);
registerMooseObjectTask("setup_mesh", MooseMesh, false);
registerMooseObjectTask("init_mesh", MooseMesh, false);
registerMooseObjectTask("add_mesh_modifier", MeshModifier, false);
registerMooseObjectTask("add_kernel", Kernel, false);
appendMooseObjectTask ("add_kernel", EigenKernel);
appendMooseObjectTask ("add_kernel", VectorKernel);
registerMooseObjectTask("add_nodal_kernel", NodalKernel, false);
registerMooseObjectTask("add_material", Material, false);
registerMooseObjectTask("add_bc", BoundaryCondition, false);
registerMooseObjectTask("add_function", Function, false);
registerMooseObjectTask("add_distribution", Distribution, false);
registerMooseObjectTask("add_sampler", Sampler, false);
registerMooseObjectTask("add_aux_kernel", AuxKernel, false);
registerMooseObjectTask("add_elemental_field_variable", AuxKernel, false);
registerMooseObjectTask("add_scalar_kernel", ScalarKernel, false);
registerMooseObjectTask("add_aux_scalar_kernel", AuxScalarKernel, false);
registerMooseObjectTask("add_dirac_kernel", DiracKernel, false);
registerMooseObjectTask("add_dg_kernel", DGKernel, false);
registerMooseObjectTask("add_interface_kernel", InterfaceKernel, false);
registerMooseObjectTask("add_constraint", Constraint, false);
registerMooseObjectTask("add_ic", InitialCondition, false);
appendMooseObjectTask ("add_ic", ScalarInitialCondition);
registerMooseObjectTask("add_damper", Damper, false);
registerMooseObjectTask("setup_predictor", Predictor, false);
registerMooseObjectTask("setup_time_stepper", TimeStepper, false);
registerMooseObjectTask("setup_time_integrator", TimeIntegrator, false);
registerMooseObjectTask("add_preconditioning", MoosePreconditioner, false);
registerMooseObjectTask("add_field_split", Split, false);
registerMooseObjectTask("add_user_object", UserObject, false);
appendMooseObjectTask ("add_user_object", Postprocessor);
registerMooseObjectTask("add_postprocessor", Postprocessor, false);
registerMooseObjectTask("add_vector_postprocessor", VectorPostprocessor, false);
registerMooseObjectTask("add_indicator", Indicator, false);
registerMooseObjectTask("add_marker", Marker, false);
registerMooseObjectTask("add_multi_app", MultiApp, false);
registerMooseObjectTask("add_transfer", Transfer, false);
registerMooseObjectTask("add_output", Output, false);
registerMooseObjectTask("add_control", Control, false);
registerMooseObjectTask("add_partitioner", MoosePartitioner, false);
// clang-format on
registerTask("dynamic_object_registration", false);
registerTask("common_output", true);
registerTask("setup_recover_file_base", true);
registerTask("add_bounds_vectors", false);
registerTask("add_periodic_bc", false);
registerTask("add_aux_variable", false);
registerTask("add_external_aux_variables", true);
registerTask("add_variable", false);
registerTask("execute_mesh_modifiers", false);
registerTask("uniform_refine_mesh", false);
registerTask("prepare_mesh", false);
registerTask("add_geometric_rm", true);
registerTask("setup_mesh_complete", false); // calls prepare
registerTask("init_displaced_problem", false);
registerTask("add_algebraic_rm", true);
registerTask("init_problem", true);
registerTask("check_copy_nodal_vars", true);
registerTask("copy_nodal_vars", true);
registerTask("copy_nodal_aux_vars", true);
registerTask("setup_postprocessor_data", false);
registerTask("setup_dampers", true);
registerTask("check_integrity", true);
registerTask("check_integrity_early", true);
registerTask("setup_quadrature", true);
/// Additional Actions
registerTask("no_action", false); // Used for Empty Action placeholders
registerTask("set_global_params", false);
registerTask("setup_adaptivity", false);
registerTask("meta_action", false);
registerTask("setup_debug", false);
registerTask("setup_residual_debug", false);
registerTask("setup_oversampling", false);
registerTask("deprecated_block", false);
registerTask("set_adaptivity_options", false);
registerTask("add_mortar_interface", false);
// Dummy Actions (useful for sync points in the dependencies)
registerTask("setup_function_complete", false);
registerTask("setup_variable_complete", false);
registerTask("ready_to_init", true);
// Output related actions
registerTask("setup_material_output", true);
registerTask("check_output", true);
/**************************/
/****** Dependencies ******/
/**************************/
/**
* The following is the default set of action dependencies for a basic MOOSE problem. The
* formatting of this string is important. Each line represents a set of dependencies that depend
* on the previous line. Items on the same line have equal weight and can be executed in any
* order.
*
* Additional dependencies can be inserted later inside of user applications with calls to
* ActionWarehouse::addDependency("task", "pre_req")
*/
syntax.addDependencySets("(meta_action)"
"(dynamic_object_registration)"
"(common_output)"
"(set_global_params)"
"(setup_recover_file_base)"
"(check_copy_nodal_vars)"
"(setup_mesh)"
"(add_partitioner)"
"(add_geometric_rm)"
"(init_mesh)"
"(prepare_mesh)"
"(add_mesh_modifier)"
"(execute_mesh_modifiers)"
"(add_mortar_interface)"
"(uniform_refine_mesh)"
"(setup_mesh_complete)"
"(determine_system_type)"
"(create_problem)"
"(setup_postprocessor_data)"
"(setup_time_integrator)"
"(setup_executioner)"
"(check_integrity_early)"
"(setup_predictor)"
"(init_displaced_problem)"
"(add_aux_variable, add_variable, add_elemental_field_variable,"
" add_external_aux_variables)"
"(setup_variable_complete)"
"(setup_quadrature)"
"(add_function)"
"(add_distribution)"
"(add_sampler)"
"(add_periodic_bc)"
"(add_user_object)"
"(setup_function_complete)"
"(setup_adaptivity)"
"(set_adaptivity_options)"
"(add_ic)"
"(add_constraint, add_field_split)"
"(add_preconditioning)"
"(setup_time_stepper)"
"(ready_to_init)"
"(setup_dampers)"
"(setup_residual_debug)"
"(add_bounds_vectors)"
"(add_multi_app)"
"(add_transfer)"
"(copy_nodal_vars, copy_nodal_aux_vars)"
"(add_material)"
"(setup_material_output)"
"(add_algebraic_rm)"
"(init_problem)"
"(setup_debug)"
"(add_output)"
"(add_postprocessor)"
"(add_vector_postprocessor)" // MaterialVectorPostprocessor requires this
// to be after material objects are created.
"(add_aux_kernel, add_bc, add_damper, add_dirac_kernel, add_kernel,"
" add_nodal_kernel, add_dg_kernel, add_interface_kernel,"
" add_scalar_kernel, add_aux_scalar_kernel, add_indicator, add_marker)"
"(add_control)"
"(check_output)"
"(check_integrity)");
}
