static HAL_BOOL ar2316SetPowerTable(struct ath_hal *ah, int16_t *minPower, int16_t *maxPower, const struct ieee80211_channel *chan, uint16_t *rfXpdGain) { struct ath_hal_5212 *ahp = AH5212(ah); const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; const RAW_DATA_STRUCT_2316 *pRawDataset = AH_NULL; uint16_t pdGainOverlap_t2; int16_t minCalPower2316_t2; uint16_t *pdadcValues = ahp->ah_pcdacTable; uint16_t gainBoundaries[4]; uint32_t reg32, regoffset; int i, numPdGainsUsed; #ifndef AH_USE_INIPDGAIN uint32_t tpcrg1; #endif HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: chan 0x%x flag 0x%x\n", __func__, chan->ic_freq, chan->ic_flags); if (IEEE80211_IS_CHAN_G(chan) || IEEE80211_IS_CHAN_108G(chan)) pRawDataset = &ee->ee_rawDataset2413[headerInfo11G]; else if (IEEE80211_IS_CHAN_B(chan)) pRawDataset = &ee->ee_rawDataset2413[headerInfo11B]; else { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: illegal mode\n", __func__); return AH_FALSE; } pdGainOverlap_t2 = (uint16_t) SM(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP); numPdGainsUsed = ar2316getGainBoundariesAndPdadcsForPowers(ah, chan->channel, pRawDataset, pdGainOverlap_t2, &minCalPower2316_t2,gainBoundaries, rfXpdGain, pdadcValues); HALASSERT(1 <= numPdGainsUsed && numPdGainsUsed <= 3); #ifdef AH_USE_INIPDGAIN /* * Use pd_gains curve from eeprom; Atheros always uses * the default curve from the ini file but some vendors * (e.g. Zcomax) want to override this curve and not * honoring their settings results in tx power 5dBm low. */ OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN, (pRawDataset->pDataPerChannel[0].numPdGains - 1)); #else tpcrg1 = OS_REG_READ(ah, AR_PHY_TPCRG1); tpcrg1 = (tpcrg1 &~ AR_PHY_TPCRG1_NUM_PD_GAIN) | SM(numPdGainsUsed-1, AR_PHY_TPCRG1_NUM_PD_GAIN); switch (numPdGainsUsed) { case 3: tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING3; tpcrg1 |= SM(rfXpdGain[2], AR_PHY_TPCRG1_PDGAIN_SETTING3); /* fall thru... */ case 2: tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING2; tpcrg1 |= SM(rfXpdGain[1], AR_PHY_TPCRG1_PDGAIN_SETTING2); /* fall thru... */ case 1: tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING1; tpcrg1 |= SM(rfXpdGain[0], AR_PHY_TPCRG1_PDGAIN_SETTING1); break; } #ifdef AH_DEBUG if (tpcrg1 != OS_REG_READ(ah, AR_PHY_TPCRG1)) HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: using non-default " "pd_gains (default 0x%x, calculated 0x%x)\n", __func__, OS_REG_READ(ah, AR_PHY_TPCRG1), tpcrg1); #endif OS_REG_WRITE(ah, AR_PHY_TPCRG1, tpcrg1); #endif /* * Note the pdadc table may not start at 0 dBm power, could be * negative or greater than 0. Need to offset the power * values by the amount of minPower for griffin */ if (minCalPower2316_t2 != 0) ahp->ah_txPowerIndexOffset = (int16_t)(0 - minCalPower2316_t2); else ahp->ah_txPowerIndexOffset = 0; /* Finally, write the power values into the baseband power table */ regoffset = 0x9800 + (672 <<2); /* beginning of pdadc table in griffin */ for (i = 0; i < 32; i++) { reg32 = ((pdadcValues[4*i + 0] & 0xFF) << 0) | ((pdadcValues[4*i + 1] & 0xFF) << 8) | ((pdadcValues[4*i + 2] & 0xFF) << 16) | ((pdadcValues[4*i + 3] & 0xFF) << 24) ; OS_REG_WRITE(ah, regoffset, reg32); regoffset += 4; } OS_REG_WRITE(ah, AR_PHY_TPCRG5, SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) | SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) | SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) | SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4)); return AH_TRUE; }
static HAL_BOOL ar2316SetPowerTable(struct ath_hal *ah, int16_t *minPower, int16_t *maxPower, HAL_CHANNEL_INTERNAL *chan, u_int16_t *rfXpdGain) { struct ath_hal_5212 *ahp = AH5212(ah); RAW_DATA_STRUCT_2316 *pRawDataset = AH_NULL; u_int16_t pdGainOverlap_t2; int16_t minCalPower2316_t2; u_int16_t *pdadcValues = ahp->ah_pcdacTable; u_int16_t gainBoundaries[4]; u_int32_t i, reg32, regoffset; HDPRINTF(ah, HAL_DBG_RF_PARAM, "%s:chan 0x%x flag 0x%x\n", __func__, chan->channel,chan->channelFlags); if (IS_CHAN_G(chan) || IS_CHAN_108G(chan)) pRawDataset = &ahp->ah_rawDataset2413[headerInfo11G]; else if (IS_CHAN_B(chan)) pRawDataset = &ahp->ah_rawDataset2413[headerInfo11B]; else { HDPRINTF(ah, HAL_DBG_RF_PARAM, "%s:illegal mode\n", __func__); return AH_FALSE; } pdGainOverlap_t2 = (u_int16_t) SM(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP); ar2316getGainBoundariesAndPdadcsForPowers(ah, chan->channel, pRawDataset, pdGainOverlap_t2,&minCalPower2316_t2,gainBoundaries, rfXpdGain, pdadcValues); OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN, (pRawDataset->pDataPerChannel[0].numPdGains - 1)); /* * Note the pdadc table may not start at 0 dBm power, could be * negative or greater than 0. Need to offset the power * values by the amount of minPower for griffin */ if (minCalPower2316_t2 != 0) ahp->ah_txPowerIndexOffset = (int16_t)(0 - minCalPower2316_t2); else ahp->ah_txPowerIndexOffset = 0; /* Finally, write the power values into the baseband power table */ regoffset = 0x9800 + (672 <<2); /* beginning of pdadc table in griffin */ for (i = 0; i < 32; i++) { reg32 = ((pdadcValues[4*i + 0] & 0xFF) << 0) | ((pdadcValues[4*i + 1] & 0xFF) << 8) | ((pdadcValues[4*i + 2] & 0xFF) << 16) | ((pdadcValues[4*i + 3] & 0xFF) << 24) ; OS_REG_WRITE(ah, regoffset, reg32); regoffset += 4; } OS_REG_WRITE(ah, AR_PHY_TPCRG5, SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) | SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) | SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) | SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4)); return AH_TRUE; }