C++ (Cpp) ar71xx_add_device_spiの例

コード例 #1

ファイル: mach-tl-wr941nd.c プロジェクト: mirko/openwrt-x-burst

static void __init tl_wr941nd_setup(void)
{
	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);

	ar71xx_set_mac_base(mac);

	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.phy_mask = 0x0;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);

	ar71xx_add_device_spi(NULL, tl_wr941nd_spi_info,
					ARRAY_SIZE(tl_wr941nd_spi_info));

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
					tl_wr941nd_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(tl_wr941nd_gpio_buttons),
					tl_wr941nd_gpio_buttons);
	ar91xx_add_device_wmac();
}

コード例 #2

ファイル: mach-mzk-w300nh.c プロジェクト: gvsurenderreddy/openwrt-9

static void __init mzk_w300nh_setup(void)
{
	u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);

	ar71xx_set_mac_base(mac);

	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.phy_mask = 0xf;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;
	ar71xx_eth0_data.has_ar8216 = 1;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
			      ARRAY_SIZE(mzk_w300nh_spi_info));

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
				    mzk_w300nh_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
				       ARRAY_SIZE(mzk_w300nh_gpio_buttons),
				       mzk_w300nh_gpio_buttons);
	ar91xx_add_device_wmac();
}

コード例 #3

ファイル: mach-tew-632brp.c プロジェクト: gvsurenderreddy/openwrt-9

static void __init tew_632brp_setup(void)
{
	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.phy_mask = 0xf;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_spi(NULL, tew_632brp_spi_info,
					ARRAY_SIZE(tew_632brp_spi_info));

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
					tew_632brp_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(tew_632brp_gpio_buttons),
					tew_632brp_gpio_buttons);

	ar91xx_add_device_wmac();
}

コード例 #4

ファイル: mach-wrt160nl.c プロジェクト: mirko/openwrt-x-burst

static void __init wrt160nl_setup(void)
{
	/* TODO: ethernet, LEDs, buttons */

	ar71xx_add_device_spi(NULL, wrt160nl_spi_info,
			      ARRAY_SIZE(wrt160nl_spi_info));

	ar71xx_add_device_usb();
	ar91xx_add_device_wmac();
}

コード例 #5

ファイル: mach-wzr-hp-ag300h.c プロジェクト: dtaht/Cerowrt.rc7

static void __init wzrhpag300h_setup(void)
{
	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
	u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
	u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
	u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;

	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 1);

	ar71xx_add_device_mdio(0, ~(BIT(0) | BIT(4)));

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth0_data.speed = SPEED_1000;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;
	ar71xx_eth0_data.phy_mask = BIT(0);

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth1_data.phy_mask = BIT(4);

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_usb();
	gpio_request(2, "usb");
	gpio_direction_output(2, 1);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
					wzrhpag300h_leds_gpio);

	ar71xx_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
					 ARRAY_SIZE(wzrhpag300h_gpio_keys),
					 wzrhpag300h_gpio_keys);

	ar71xx_add_device_spi(NULL, ar71xx_spi_info,
			      ARRAY_SIZE(ar71xx_spi_info));

	add_mtd_concat_notifier();

	ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
}

コード例 #6

ファイル: mach-wp543.c プロジェクト: gvsurenderreddy/openwrt-9

static void __init wp543_setup(void)
{
	ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));

	ar71xx_add_device_mdio(0xfffffff7);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
	ar71xx_eth0_data.phy_mask = 0x00000008;
	ar71xx_add_device_eth(0);

	ar71xx_add_device_usb();

	ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
					wp543_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(wp543_gpio_buttons),
					wp543_gpio_buttons);
}

コード例 #7

ファイル: mach-rb-4xx.c プロジェクト: mirko/openwrt-x-burst

static void rb433_add_device_spi(void)
{
	ar71xx_add_device_spi(&rb433_spi_data, rb433_spi_info,
				ARRAY_SIZE(rb433_spi_info));
}

コード例 #8

ファイル: mach-rb-4xx.c プロジェクト: mirko/openwrt-x-burst

static void rb4xx_add_device_spi(void)
{
	ar71xx_add_device_spi(NULL, rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
}