void EnableArchiveFormats(struct archive *p_archive)
{
// archive_read_support_filter_bzip2(p_archive);
// archive_read_support_filter_compress(p_archive);
// archive_read_support_filter_gzip(p_archive);
// archive_read_support_filter_grzip(p_archive);
// archive_read_support_filter_lrzip(p_archive);
// archive_read_support_filter_lzip(p_archive);
archive_read_support_filter_lzma(p_archive);
archive_read_support_filter_lzop(p_archive);
archive_read_support_filter_none(p_archive);
archive_read_support_filter_rpm(p_archive);
archive_read_support_filter_uu(p_archive);
archive_read_support_filter_xz(p_archive);
// archive_read_support_format_7zip(p_archive);
archive_read_support_format_ar(p_archive);
archive_read_support_format_cab(p_archive);
archive_read_support_format_cpio(p_archive);
archive_read_support_format_gnutar(p_archive);
// archive_read_support_format_iso9660(p_archive);
archive_read_support_format_lha(p_archive);
archive_read_support_format_mtree(p_archive);
archive_read_support_format_rar(p_archive);
archive_read_support_format_raw(p_archive);
archive_read_support_format_tar(p_archive);
archive_read_support_format_xar(p_archive);
// archive_read_support_format_zip(p_archive);
}
int
archive_read_support_filter_all(struct archive *a)
{
archive_check_magic(a, ARCHIVE_READ_MAGIC,
ARCHIVE_STATE_NEW, "archive_read_support_filter_all");
/* Bzip falls back to "bunzip2" command-line */
archive_read_support_filter_bzip2(a);
/* The decompress code doesn't use an outside library. */
archive_read_support_filter_compress(a);
/* Gzip decompress falls back to "gunzip" command-line. */
archive_read_support_filter_gzip(a);
/* Lzip falls back to "unlzip" command-line program. */
archive_read_support_filter_lzip(a);
/* The LZMA file format has a very weak signature, so it
* may not be feasible to keep this here, but we'll try.
* This will come back out if there are problems. */
/* Lzma falls back to "unlzma" command-line program. */
archive_read_support_filter_lzma(a);
/* Xz falls back to "unxz" command-line program. */
archive_read_support_filter_xz(a);
/* The decode code doesn't use an outside library. */
archive_read_support_filter_uu(a);
/* The decode code doesn't use an outside library. */
archive_read_support_filter_rpm(a);
/* Note: We always return ARCHIVE_OK here, even if some of the
* above return ARCHIVE_WARN. The intent here is to enable
* "as much as possible." Clients who need specific
* compression should enable those individually so they can
* verify the level of support. */
/* Clear any warning messages set by the above functions. */
archive_clear_error(a);
return (ARCHIVE_OK);
}
static void extract_recovery(char *ramdisk_path)
{
// Delete everything in the current root
DIR *root = opendir("/");
struct dirent *dp;
while ((dp = readdir(root)) != NULL)
{
unlink(dp->d_name);
}
closedir(root);
// Open the ramdisk
struct archive *a = archive_read_new();
archive_read_support_filter_lzma(a);
archive_read_support_format_cpio(a);
if (archive_read_open_filename(a, ramdisk_path, 4096) == ARCHIVE_OK)
{
// Set up the writer
struct archive *ext = archive_write_disk_new();
archive_write_disk_set_options(ext, ARCHIVE_EXTRACT_UNLINK | ARCHIVE_EXTRACT_PERM);
chdir("/");
while (1)
{
struct archive_entry *entry;
// Read the next file
if (archive_read_next_header(a, &entry) == ARCHIVE_EOF)
break;
// Create the file
archive_write_header(ext, entry);
// If the file has data to write...
if (!archive_entry_size_is_set(entry) || archive_entry_size(entry) > 0)
{
const void *block;
size_t size;
int64_t offset;
// Write the blocks until EOF
while (1)
{
if (archive_read_data_block(a, &block, &size, &offset) == ARCHIVE_EOF)
break;
archive_write_data_block(ext, block, size, offset);
}
}
}
archive_write_free(ext);
}
archive_read_free(a);
}
/*
* All of the sample files have the same contents; they're just
* compressed in different ways.
*/
static void
compat_lzma(const char *name)
{
const char *n[7] = { "f1", "f2", "f3", "d1/f1", "d1/f2", "d1/f3", NULL };
struct archive_entry *ae;
struct archive *a;
int i, r;
assert((a = archive_read_new()) != NULL);
assertEqualIntA(a, ARCHIVE_OK, archive_read_support_filter_all(a));
r = archive_read_support_filter_lzma(a);
if (r == ARCHIVE_WARN) {
skipping("lzma reading not fully supported on this platform");
assertEqualInt(ARCHIVE_OK, archive_read_free(a));
return;
}
assertEqualIntA(a, ARCHIVE_OK, archive_read_support_format_all(a));
extract_reference_file(name);
assertEqualIntA(a, ARCHIVE_OK, archive_read_open_filename(a, name, 2));
/* Read entries, match up names with list above. */
for (i = 0; i < 6; ++i) {
failure("Could not read file %d (%s) from %s", i, n[i], name);
assertEqualIntA(a, ARCHIVE_OK,
archive_read_next_header(a, &ae));
assertEqualString(n[i], archive_entry_pathname(ae));
}
/* Verify the end-of-archive. */
assertEqualIntA(a, ARCHIVE_EOF, archive_read_next_header(a, &ae));
/* Verify that the format detection worked. */
assertEqualInt(archive_filter_code(a, 0), ARCHIVE_FILTER_LZMA);
assertEqualString(archive_filter_name(a, 0), "lzma");
assertEqualInt(archive_format(a), ARCHIVE_FORMAT_TAR_USTAR);
assertEqualInt(ARCHIVE_OK, archive_read_close(a));
assertEqualInt(ARCHIVE_OK, archive_read_free(a));
}
Installer::ProceedState RomInstaller::on_checked_device()
{
// /sbin is not going to be populated with anything useful in a normal boot
// image. We can almost guarantee that a recovery image is going to be
// installed though, so we'll open the recovery partition with libmbp and
// extract its /sbin with libarchive into the chroot's /sbin.
std::string block_dev(_recovery_block_dev);
mbp::BootImage bi;
mbp::CpioFile innerCpio;
const unsigned char *ramdisk_data;
std::size_t ramdisk_size;
bool using_boot = false;
// Check if the device has a combined boot/recovery partition. If the
// FOTAKernel partition is listed, it will be used instead of the combined
// ramdisk from the boot image
bool combined = mb_device_flags(_device)
& FLAG_HAS_COMBINED_BOOT_AND_RECOVERY;
if (combined && block_dev.empty()) {
block_dev = _boot_block_dev;
using_boot = true;
}
if (block_dev.empty()) {
display_msg("Could not determine the recovery block device");
return ProceedState::Fail;
}
if (!bi.loadFile(block_dev)) {
display_msg("Failed to load recovery partition image");
return ProceedState::Fail;
}
// Load ramdisk
bi.ramdiskImageC(&ramdisk_data, &ramdisk_size);
if (using_boot) {
if (!innerCpio.load(ramdisk_data, ramdisk_size)) {
display_msg("Failed to load ramdisk from combined boot image");
return ProceedState::Fail;
}
if (!innerCpio.contentsC("sbin/ramdisk-recovery.cpio",
&ramdisk_data, &ramdisk_size)) {
display_msg("Could not find recovery ramdisk in combined boot image");
return ProceedState::Fail;
}
}
autoclose::archive in(archive_read_new(), archive_read_free);
autoclose::archive out(archive_write_disk_new(), archive_write_free);
if (!in || !out) {
LOGE("Out of memory");
return ProceedState::Fail;
}
archive_entry *entry;
// Set up input
archive_read_support_filter_gzip(in.get());
archive_read_support_filter_lzop(in.get());
archive_read_support_filter_lz4(in.get());
archive_read_support_filter_lzma(in.get());
archive_read_support_filter_xz(in.get());
archive_read_support_format_cpio(in.get());
int ret = archive_read_open_memory(in.get(),
const_cast<unsigned char *>(ramdisk_data), ramdisk_size);
if (ret != ARCHIVE_OK) {
LOGW("Failed to open recovery ramdisk: %s",
archive_error_string(in.get()));
return ProceedState::Fail;
}
// Set up output
archive_write_disk_set_options(out.get(),
ARCHIVE_EXTRACT_ACL |
ARCHIVE_EXTRACT_FFLAGS |
ARCHIVE_EXTRACT_PERM |
ARCHIVE_EXTRACT_SECURE_NODOTDOT |
ARCHIVE_EXTRACT_SECURE_SYMLINKS |
ARCHIVE_EXTRACT_TIME |
ARCHIVE_EXTRACT_UNLINK |
ARCHIVE_EXTRACT_XATTR);
while ((ret = archive_read_next_header(in.get(), &entry)) == ARCHIVE_OK) {
std::string path = archive_entry_pathname(entry);
if (path == "default.prop") {
path = "default.recovery.prop";
} else if (!util::starts_with(path, "sbin/")) {
continue;
}
LOGE("Copying from recovery: %s", path.c_str());
archive_entry_set_pathname(entry, in_chroot(path).c_str());
if (util::libarchive_copy_header_and_data(
in.get(), out.get(), entry) != ARCHIVE_OK) {
return ProceedState::Fail;
}
archive_entry_set_pathname(entry, path.c_str());
}
if (ret != ARCHIVE_EOF) {
LOGE("Archive extraction ended without reaching EOF: %s",
archive_error_string(in.get()));
return ProceedState::Fail;
}
// Create fake /etc/fstab file to please installers that read the file
std::string etc_fstab(in_chroot("/etc/fstab"));
if (access(etc_fstab.c_str(), R_OK) < 0 && errno == ENOENT) {
autoclose::file fp(autoclose::fopen(etc_fstab.c_str(), "w"));
if (fp) {
auto system_devs = mb_device_system_block_devs(_device);
auto cache_devs = mb_device_cache_block_devs(_device);
auto data_devs = mb_device_data_block_devs(_device);
// Set block device if it's provided and non-empty
const char *system_dev =
system_devs && system_devs[0] && system_devs[0][0]
? system_devs[0] : "dummy";
const char *cache_dev =
cache_devs && cache_devs[0] && cache_devs[0][0]
? cache_devs[0] : "dummy";
const char *data_dev =
data_devs && data_devs[0] && data_devs[0][0]
? data_devs[0] : "dummy";
fprintf(fp.get(), "%s /system ext4 rw 0 0\n", system_dev);
fprintf(fp.get(), "%s /cache ext4 rw 0 0\n", cache_dev);
fprintf(fp.get(), "%s /data ext4 rw 0 0\n", data_dev);
}
}
// Load recovery properties
util::file_get_all_properties(
in_chroot("/default.recovery.prop"), &_recovery_props);
return ProceedState::Continue;
}
Installer::ProceedState RomInstaller::on_checked_device()
{
// /sbin is not going to be populated with anything useful in a normal boot
// image. We can almost guarantee that a recovery image is going to be
// installed though, so we'll open the recovery partition with libmbp and
// extract its /sbin with libarchive into the chroot's /sbin.
mbp::BootImage bi;
if (!bi.loadFile(_recovery_block_dev)) {
display_msg("Failed to load recovery partition image");
return ProceedState::Fail;
}
const unsigned char *ramdisk_data;
std::size_t ramdisk_size;
bi.ramdiskImageC(&ramdisk_data, &ramdisk_size);
autoclose::archive in(archive_read_new(), archive_read_free);
autoclose::archive out(archive_write_disk_new(), archive_write_free);
if (!in | !out) {
LOGE("Out of memory");
return ProceedState::Fail;
}
archive_entry *entry;
// Set up input
archive_read_support_filter_gzip(in.get());
archive_read_support_filter_lzop(in.get());
archive_read_support_filter_lz4(in.get());
archive_read_support_filter_lzma(in.get());
archive_read_support_format_cpio(in.get());
int ret = archive_read_open_memory(in.get(),
const_cast<unsigned char *>(ramdisk_data), ramdisk_size);
if (ret != ARCHIVE_OK) {
LOGW("Failed to open recovery ramdisk: %s",
archive_error_string(in.get()));
return ProceedState::Fail;
}
// Set up output
archive_write_disk_set_options(out.get(),
ARCHIVE_EXTRACT_ACL |
ARCHIVE_EXTRACT_FFLAGS |
ARCHIVE_EXTRACT_PERM |
ARCHIVE_EXTRACT_SECURE_NODOTDOT |
ARCHIVE_EXTRACT_SECURE_SYMLINKS |
ARCHIVE_EXTRACT_TIME |
ARCHIVE_EXTRACT_UNLINK |
ARCHIVE_EXTRACT_XATTR);
while ((ret = archive_read_next_header(in.get(), &entry)) == ARCHIVE_OK) {
std::string path = archive_entry_pathname(entry);
if (!util::starts_with(path, "sbin/")) {
continue;
}
LOGE("Copying from recovery: %s", path.c_str());
archive_entry_set_pathname(entry, (_chroot + "/" + path).c_str());
if (util::archive_copy_header_and_data(in.get(), out.get(), entry) != ARCHIVE_OK) {
return ProceedState::Fail;
}
archive_entry_set_pathname(entry, path.c_str());
}
if (ret != ARCHIVE_EOF) {
LOGE("Archive extraction ended without reaching EOF: %s",
archive_error_string(in.get()));
return ProceedState::Fail;
}
return ProceedState::Continue;
}
int
archive_read_append_filter(struct archive *_a, int code)
{
int r1, r2, number_bidders, i;
char str[20];
struct archive_read_filter_bidder *bidder;
struct archive_read_filter *filter;
struct archive_read *a = (struct archive_read *)_a;
r1 = r2 = (ARCHIVE_OK);
switch (code)
{
case ARCHIVE_FILTER_NONE:
/* No filter to add, so do nothing.
* NOTE: An initial "NONE" type filter is always set at the end of the
* filter chain.
*/
r1 = (ARCHIVE_OK);
break;
case ARCHIVE_FILTER_GZIP:
strcpy(str, "gzip");
r1 = archive_read_support_filter_gzip(_a);
break;
case ARCHIVE_FILTER_BZIP2:
strcpy(str, "bzip2");
r1 = archive_read_support_filter_bzip2(_a);
break;
case ARCHIVE_FILTER_COMPRESS:
strcpy(str, "compress (.Z)");
r1 = archive_read_support_filter_compress(_a);
break;
case ARCHIVE_FILTER_PROGRAM:
archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER,
"Cannot append program filter using archive_read_append_filter");
return (ARCHIVE_FATAL);
case ARCHIVE_FILTER_LZMA:
strcpy(str, "lzma");
r1 = archive_read_support_filter_lzma(_a);
break;
case ARCHIVE_FILTER_XZ:
strcpy(str, "xz");
r1 = archive_read_support_filter_xz(_a);
break;
case ARCHIVE_FILTER_UU:
strcpy(str, "uu");
r1 = archive_read_support_filter_uu(_a);
break;
case ARCHIVE_FILTER_RPM:
strcpy(str, "rpm");
r1 = archive_read_support_filter_rpm(_a);
break;
case ARCHIVE_FILTER_LZIP:
strcpy(str, "lzip");
r1 = archive_read_support_filter_lzip(_a);
break;
case ARCHIVE_FILTER_LRZIP:
strcpy(str, "lrzip");
r1 = archive_read_support_filter_lrzip(_a);
break;
default:
archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER,
"Invalid filter code specified");
return (ARCHIVE_FATAL);
}
if (code != ARCHIVE_FILTER_NONE)
{
number_bidders = sizeof(a->bidders) / sizeof(a->bidders[0]);
bidder = a->bidders;
for (i = 0; i < number_bidders; i++, bidder++)
{
if (!bidder->name || !strcmp(bidder->name, str))
break;
}
if (!bidder->name || strcmp(bidder->name, str))
{
archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER,
"Internal error: Unable to append filter");
return (ARCHIVE_FATAL);
}
filter
= (struct archive_read_filter *)calloc(1, sizeof(*filter));
if (filter == NULL)
{
archive_set_error(&a->archive, ENOMEM, "Out of memory");
return (ARCHIVE_FATAL);
}
filter->bidder = bidder;
filter->archive = a;
filter->upstream = a->filter;
a->filter = filter;
r2 = (bidder->init)(a->filter);
if (r2 != ARCHIVE_OK) {
__archive_read_close_filters(a);
__archive_read_free_filters(a);
return (ARCHIVE_FATAL);
}
}
a->bypass_filter_bidding = 1;
return (r1 < r2) ? r1 : r2;
}
