コード例 #1
0
ファイル: thread_tasklet.c プロジェクト: Archcady/mbed-os
/*
 * \brief Configure mesh network
 *
 */
void thread_tasklet_configure_and_connect_to_network(void)
{
    int8_t status;
    link_configuration_s* temp_link_config=NULL;


    if (MBED_CONF_MBED_MESH_API_THREAD_DEVICE_TYPE == MESH_DEVICE_TYPE_THREAD_MINIMAL_END_DEVICE) {
            thread_tasklet_data_ptr->operating_mode = NET_6LOWPAN_HOST;
    }
    else if (MBED_CONF_MBED_MESH_API_THREAD_DEVICE_TYPE == MESH_DEVICE_TYPE_THREAD_SLEEPY_END_DEVICE) {
        thread_tasklet_data_ptr->operating_mode = NET_6LOWPAN_SLEEPY_HOST;
    } else {
        thread_tasklet_data_ptr->operating_mode = NET_6LOWPAN_ROUTER;
    }

    arm_nwk_interface_configure_6lowpan_bootstrap_set(
        thread_tasklet_data_ptr->nwk_if_id,
        thread_tasklet_data_ptr->operating_mode,
        NET_6LOWPAN_THREAD);
        
    thread_tasklet_data_ptr->channel_list.channel_page = (channel_page_e)MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_PAGE;
    thread_tasklet_data_ptr->channel_list.channel_mask[0] = MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_MASK;
    
    TRACE_DETAIL("channel page: %d", thread_tasklet_data_ptr->channel_list.channel_page);
    TRACE_DETAIL("channel mask: 0x%.8lx", thread_tasklet_data_ptr->channel_list.channel_mask[0]);

    // PSKd
    const char PSKd[] = MBED_CONF_MBED_MESH_API_THREAD_PSKD;
    MBED_ASSERT(sizeof(PSKd) > 5 && sizeof(PSKd) < 33);

    char *dyn_buf = ns_dyn_mem_alloc(sizeof(PSKd));
    strcpy(dyn_buf, PSKd);
    ns_dyn_mem_free(device_configuration.PSKd_ptr);
    device_configuration.PSKd_ptr = (uint8_t*)dyn_buf;
    device_configuration.PSKd_len = sizeof(PSKd) - 1;  
    
    if (true == MBED_CONF_MBED_MESH_API_THREAD_USE_STATIC_LINK_CONFIG) {
        read_link_configuration();
        temp_link_config = &thread_tasklet_data_ptr->link_config;
    }
    
    thread_management_node_init(thread_tasklet_data_ptr->nwk_if_id,
                           &thread_tasklet_data_ptr->channel_list,
                           &device_configuration,
                           temp_link_config);

    status = arm_nwk_interface_up(thread_tasklet_data_ptr->nwk_if_id);

    if (status >= 0) {
        thread_tasklet_data_ptr->tasklet_state = TASKLET_STATE_BOOTSTRAP_STARTED;
        tr_info("Start Thread bootstrap (%s mode)", thread_tasklet_data_ptr->operating_mode == NET_6LOWPAN_SLEEPY_HOST ? "SED" : "Router");
    } else {
        thread_tasklet_data_ptr->tasklet_state = TASKLET_STATE_BOOTSTRAP_FAILED;
        tr_err("Bootstrap start failed, %d", status);
        thread_tasklet_network_state_changed(MESH_BOOTSTRAP_START_FAILED);
    }
}
コード例 #2
0
/*
 * \brief Configure and establish network connection
 *
 */
void nd_tasklet_configure_and_connect_to_network(void)
{
    int8_t status;
    char *sec_mode;

    // configure bootstrap
    arm_nwk_interface_configure_6lowpan_bootstrap_set(
        tasklet_data_ptr->network_interface_id, tasklet_data_ptr->mode,
        NET_6LOWPAN_ND_WITH_MLE);

    sec_mode = STR(MBED_MESH_API_6LOWPAN_ND_SECURITY_MODE);

    if (strcmp(sec_mode, "PSK") == 0) {
        tr_debug("Using PSK security mode.");
        tasklet_data_ptr->sec_mode = NET_SEC_MODE_PSK_LINK_SECURITY;
        tasklet_data_ptr->psk_sec_info.key_id = MBED_MESH_API_6LOWPAN_ND_PSK_KEY_ID;
        memcpy(tasklet_data_ptr->psk_sec_info.security_key, (const uint8_t[16])MBED_MESH_API_6LOWPAN_ND_PSK_KEY, 16);
    } else {
        tr_debug("Link-layer security NOT enabled.");
        tasklet_data_ptr->sec_mode = NET_SEC_MODE_NO_LINK_SECURITY;
    }

    // configure link layer security
    arm_nwk_link_layer_security_mode(
        tasklet_data_ptr->network_interface_id,
        tasklet_data_ptr->sec_mode,
        MBED_MESH_API_6LOWPAN_ND_SEC_LEVEL,
        &tasklet_data_ptr->psk_sec_info);

    // configure scan parameters
    arm_nwk_6lowpan_link_scan_parameter_set(tasklet_data_ptr->network_interface_id, 5);

    // configure scan channels
    initialize_channel_list();

    // Configure scan options (NULL disables filter)
    arm_nwk_6lowpan_link_nwk_id_filter_for_nwk_scan(
        tasklet_data_ptr->network_interface_id, NULL);

    arm_nwk_6lowpan_link_panid_filter_for_nwk_scan(
         tasklet_data_ptr->network_interface_id,
         MBED_MESH_API_6LOWPAN_ND_PANID_FILTER);

    status = arm_nwk_interface_up(tasklet_data_ptr->network_interface_id);
    if (status >= 0) {
        tasklet_data_ptr->tasklet_state = TASKLET_STATE_BOOTSTRAP_STARTED;
        tr_info("Start 6LoWPAN ND Bootstrap");
    } else {
        tasklet_data_ptr->tasklet_state = TASKLET_STATE_BOOTSTRAP_FAILED;
        tr_err("Bootstrap start failed, %d", status);
        nd_tasklet_network_state_changed(MESH_BOOTSTRAP_START_FAILED);
    }
}
コード例 #3
0
/*
 * \brief A function which will be eventually called by NanoStack OS when ever the OS has an event to deliver.
 * @param event, describes the sender, receiver and event type.
 *
 * NOTE: Interrupts requested by HW are possible during this function!
 */
void tasklet_main(arm_event_s *event)
{
	uint8_t  master_key[16];
	/**Border Router ND setup*/
    static link_configuration_s link_setup;
    device_configuration_s device_config;
    uint8_t networkid[16];
    uint32_t channel_mask;
    channel_mask = (uint32_t) 1 << RF_CHANNEL;
    char psdK[] = "Kukkuu!";
    device_config.PSKd_ptr = psdK;
	device_config.leaderCap = true;

	int8_t retval;
	if (event->sender == 0)
	{
		arm_library_event_type_e event_type;
		event_type = (arm_library_event_type_e) event->event_type;
		switch (event_type)
		{
			//This event is delivered every and each time when there is new information of network connectivity.
			case ARM_LIB_NWK_INTERFACE_EVENT:
				/* Network Event state event handler */
				app_parse_network_event(event);
				break;

			case ARM_LIB_TASKLET_INIT_EVENT:
				/*Event with type EV_INIT is an initialiser event of NanoStack OS.
				 * The event is delivered when the NanoStack OS is running fine. This event should be delivered ONLY ONCE.
				 */

				node_main_tasklet_id = event->receiver;

				/* Bootsrapping Thread network */
				arm_nwk_interface_configure_6lowpan_bootstrap_set(net_rf_id, NET_6LOWPAN_ROUTER, NET_6LOWPAN_THREAD);

				arm_nwk_6lowpan_link_scan_paramameter_set(net_rf_id, channel_list, 5);

				rf_read_mac_address(link_setup.extended_random_mac);
				link_setup.extended_random_mac[0] |= 0x02;

				//Initialize Thread stack to leader mode
				link_setup.steering_data_len = 0;

                memcpy(networkid, "Arm Powered Core", 16);
                memcpy(link_setup.name, networkid, 16);

                link_setup.panId = THREAD_NTW_PAN_ID;
            	link_setup.rfChannel = RF_CHANNEL;

				link_setup.Protocol_id = THREAD_PROTOCOL_ID;
            	link_setup.version = THREAD_PROTOCOL_VERSION;
            	memcpy(link_setup.mesh_local_ula_prefix,br_thread_ml_prefix, 8);

                arm_nwk_6lowpan_gp_address_mode(net_rf_id, NET_6LOWPAN_GP16_ADDRESS, 0xffff, 1);

				memcpy(master_key, default_net_security_key, 16);
				memcpy(link_setup.master_key,default_net_security_key, 16 );
				link_setup.key_rotation = 3600;
				link_setup.key_sequence = 0;
				memcpy(link_setup.mesh_local_ula_prefix,br_thread_ml_prefix, 8);
				thread_managenet_node_init(net_rf_id, channel_mask, &device_config, &link_setup);

				retval = arm_nwk_interface_up(net_rf_id);
				if (retval != 0)
				{
					//debug_int(retval);
					tr_debug("Start Fail code: %d", retval);
				}
				else
				{
					tr_debug("6LoWPAN IP Bootstrap started");
					network_ready();
				}
				break;
				case ARM_LIB_SYSTEM_TIMER_EVENT:
					eventOS_event_timer_cancel(event->event_id, node_main_tasklet_id);

					if(event->event_id == 1)
					{
						if(arm_nwk_interface_up(net_rf_id) == 0)
						{
							tr_debug("Start Network bootstrap Again");
						}

					}
				break;
				default:
				break;
		}
	}
}