/* read in parameters and coupling constants */
int readin(int prompt) {
/* read in parameters for su3 monte carlo */
/* argument "prompt" is 1 if prompts are to be given for input */
int status,status2;
char savebuf[128];
char save_w[128];
int i;
char descrp[30];
/* On node zero, read parameters and send to all other nodes */
if(this_node==0) {
printf("\n\n");
status=0;
/* Number of heavy kappas */
IF_OK status += get_i(stdin, prompt,"number_of_heavy_kappas",
&par_buf.num_kap_heavy );
IF_OK if( par_buf.num_kap_heavy>MAX_KAP ) {
printf("num_kap_heavy = %d must be in [1,%d]!\n",
num_kap_heavy, MAX_KAP);
status++;
}
/* Values of heavy kappas */
for(i=0; i<par_buf.num_kap_heavy; i++) {
IF_OK status += get_f(stdin, prompt,"kappa_heavy", &par_buf.kap[i] );
}
/* Number of light kappas */
IF_OK status += get_i(stdin, prompt,"number_of_light_kappas",
&par_buf.num_kap_light );
par_buf.num_kap = par_buf.num_kap_heavy + par_buf.num_kap_light;
IF_OK if(par_buf.num_kap_light>MAX_KAP-num_kap_heavy ||
par_buf.num_kap_light < 1) {
printf("num_kap_light = %d must be in [1,%d]!\n",
par_buf.num_kap_light, MAX_KAP - num_kap_heavy);
status++;
}
/* Values of light kappas */
for(i=par_buf.num_kap_heavy; i<par_buf.num_kap; i++) {
IF_OK status += get_f(stdin, prompt,"kappa_light", &par_buf.kap[i] );
}
/* Clover coefficient, u0 */
IF_OK status += get_f(stdin, prompt,"clov_c", &par_buf.clov_c );
IF_OK status += get_f(stdin, prompt,"u0", &par_buf.u0 );
IF_OK {
if (prompt!=0)
printf("enter 'nr_forward, nr_backward, nr_forward_backward'\n");
status2=scanf("%s",savebuf);
if(status2!=1) {
printf("ERROR IN INPUT: nr type command\n");
status++;
}
else if(strcmp("nr_forward",savebuf) == 0 ) par_buf.nr_forw_back = 1;
else if(strcmp("nr_backward",savebuf) == 0 ) par_buf.nr_forw_back = 2;
else if(strcmp("nr_forward_backward",savebuf) == 0 ) par_buf.nr_forw_back = 3;
else{
printf("ERROR IN INPUT: nr command is invalid\n");
status++;
}
}
/** starting timeslice for the inversion ***/
IF_OK status += get_i(stdin, prompt,"q_source_time", &par_buf.source_time );
/* maximum no. of conjugate gradient iterations */
IF_OK status += get_i(stdin, prompt,"max_cg_iterations", &par_buf.niter );
/* maximum no. of conjugate gradient restarts */
IF_OK status += get_i(stdin, prompt,"max_cg_restarts", &par_buf.nrestart );
/* error for propagator conjugate gradient */
for(i=0; i<par_buf.num_kap; i++) {
IF_OK status += get_f(stdin, prompt,"error_for_propagator", &par_buf.resid[i] );
}
/* Get source type */
IF_OK status += ask_w_quark_source( stdin, prompt, &wallflag, descrp);
/* width: psi=exp(-(r/r0)^2) */
IF_OK if (prompt!=0)
printf("enter width(s) r0 as in: source=exp(-(r/r0)^2)\n");
for(i=0; i<par_buf.num_kap; i++) {
IF_OK status += get_f(stdin, prompt,"r0", &par_buf.wqs[i].r0 );
/* (Same source type for each spectator) */
IF_OK par_buf.wqs[i].type = wallflag;
IF_OK strcpy(par_buf.wqs[i].descrp,descrp);
/* (Hardwired source location for each spectator) */
IF_OK {
par_buf.wqs[i].x0 = source_loc[0];
par_buf.wqs[i].y0 = source_loc[1];
par_buf.wqs[i].z0 = source_loc[2];
par_buf.wqs[i].t0 = par_buf.source_time ;
}
}
/* find out what kind of starting lattice to use */
IF_OK status += ask_starting_lattice(stdin, prompt, &par_buf.startflag,
par_buf.startfile );
IF_OK if (prompt!=0)
printf("enter 'no_gauge_fix', or 'coulomb_gauge_fix'\n");
IF_OK scanf("%s",savebuf);
IF_OK printf("%s\n",savebuf);
IF_OK {
if(strcmp("coulomb_gauge_fix",savebuf) == 0 ) {
par_buf.fixflag = COULOMB_GAUGE_FIX;
}
else if(strcmp("no_gauge_fix",savebuf) == 0 ) {
par_buf.fixflag = NO_GAUGE_FIX;
}
else{
printf("error in input: fixing_command is invalid\n");
status++;
}
}
/* find out what to do with lattice at end */
IF_OK status += ask_ending_lattice(stdin, prompt, &(par_buf.saveflag),
par_buf.savefile );
IF_OK status += ask_ildg_LFN(stdin, prompt, par_buf.saveflag,
par_buf.stringLFN );
/* find out starting propagator */
IF_OK for(i=0; i<par_buf.num_kap; i++)
status += ask_starting_wprop(stdin, prompt,&par_buf.startflag_w[i],
par_buf.startfile_w[i]);
/* what to do with computed propagator */
IF_OK for(i=0; i<par_buf.num_kap; i++)
status += ask_ending_wprop(stdin, prompt,&par_buf.saveflag_w[i],
par_buf.savefile_w[i]);
IF_OK if(prompt!=0)
printf("propagator scratch file:\n enter 'serial_scratch_wprop' or 'parallel_scratch_wprop'\n");
IF_OK status2=scanf("%s",save_w);
IF_OK printf("%s ",save_w);
IF_OK
{
if(strcmp("serial_scratch_wprop",save_w) == 0 )
par_buf.scratchflag = SAVE_SERIAL;
else if(strcmp("parallel_scratch_wprop",save_w) == 0 )
par_buf.scratchflag = SAVE_CHECKPOINT;
else
{
printf("error in input: %s is not a scratch file command\n",save_w);
status++;
}
IF_OK
{
/*read name of file and load it */
if(prompt!=0)printf("enter name of scratch file stem for props\n");
status2=scanf("%s",par_buf.scratchstem_w);
if(status2 !=1) {
printf("error in input: scratch file stem name\n");
status++;
}
printf("%s\n",par_buf.scratchstem_w);
}
}
if( status > 0)par_buf.stopflag=1;
else par_buf.stopflag=0;
} /* end if(this_node==0) */
/* read in parameters and coupling constants */
int readin(int prompt) {
/* read in parameters for su3 monte carlo */
/* argument "prompt" is 1 if prompts are to be given for input */
int status;
char savebuf[128];
int i,j;
/* On node zero, read parameters and send to all other nodes */
if(this_node==0){
printf("\n\n");
status=0;
/*------------------------------------------------------------*/
/* Quarks and their sources */
/*------------------------------------------------------------*/
/* Number of quarks */
IF_OK status += get_i(stdin,prompt,"number_of_quarks", ¶m.num_qk );
if( param.num_qk>MAX_QK ){
printf("num_qk = %d must be <= %d!\n", param.num_qk, MAX_QK);
status++;
}
/* Quark parameters */
IF_OK for(i = 0; i < param.num_qk; i++){
/* Input propagator type */
IF_OK status += get_s(stdin, prompt,"quark_type", savebuf );
IF_OK {
if(strcmp(savebuf,"clover") == 0)param.qk_type[i] = CLOVER_TYPE;
else if(strcmp(savebuf,"KS") == 0)param.qk_type[i] = KS_TYPE;
else {
printf("Unknown quark type %s\n",savebuf);
status++;
}
}
/* Output propagator type */
/* The KS4_TYPE is designed for extended naive propagators that
follow the spin conventions of the clover_invert2 code. */
IF_OK status += get_s(stdin, prompt,"output_type", savebuf );
IF_OK {
if(strcmp(savebuf,"clover") == 0)param.dst_type[i] = CLOVER_TYPE;
else if(strcmp(savebuf,"KS") == 0)param.dst_type[i] = KS_TYPE;
else if(strcmp(savebuf,"KS4") == 0)param.dst_type[i] = KS4_TYPE;
else {
printf("Unknown output type %s\n",savebuf);
status++;
}
}
/* Input Dirac propagator */
if(param.qk_type[i] == CLOVER_TYPE){
/* Name of starting Dirac propagator file */
IF_OK status += ask_starting_wprop( stdin, prompt,
¶m.startflag_w[i],
param.startfile_w[i]);
IF_OK status += get_i(stdin,prompt,"ncolor", ¶m.ncolor[i] );
/* Dirac sink operator */
IF_OK {
if(param.dst_type[i] == CLOVER_TYPE ||
param.dst_type[i] == KS4_TYPE){
IF_OK init_qss_op(¶m.snk_qs_op[i]);
IF_OK status += get_wv_field_op( stdin, prompt, ¶m.snk_qs_op[i]);
} else {
printf("Unsupported output source type\n");
status++;
}
}
} else { /* Input KS propagator */
int readin(int prompt) {
/* argument "prompt" is 1 if prompts are to be given for input */
int status,i;
/* On node zero, read parameters and send to all other nodes */
if(this_node==0){
status=0;
/* find out what kind of starting lattice to use */
IF_OK status += ask_starting_lattice(stdin, prompt, &(par_buf.startflag),
par_buf.startfile );
/* find out what to do with lattice at end */
IF_OK status += ask_ending_lattice(stdin, prompt, &(par_buf.saveflag),
par_buf.savefile );
IF_OK status += ask_ildg_LFN(stdin, prompt, par_buf.saveflag,
par_buf.stringLFN );
/* Get ensemble values for NERSC archive */
IF_OK if (par_buf.saveflag == SAVE_SERIAL_ARCHIVE)
status += get_s(stdin, prompt,"ensemble_id", par_buf.ensemble_id );
IF_OK if (par_buf.saveflag == SAVE_SERIAL_ARCHIVE)
status += get_i(stdin, prompt,"sequence_number",
&par_buf.sequence_number );
/* Number of kappas */
IF_OK status += get_i(stdin, prompt,"number_of_kappas", &par_buf.num_kap );
if( par_buf.num_kap>MAX_KAP ){
printf("num_kap = %d must be <= %d!\n", par_buf.num_kap, MAX_KAP);
status++;
}
/* To be safe initialize the following to zero */
for(i=0;i<MAX_KAP;i++){
kap[i] = 0.0;
}
for(i=0;i<par_buf.num_kap;i++){
IF_OK status += ask_starting_wprop(stdin, prompt,
&par_buf.startflag_w[i],
par_buf.startfile_w[i]);
/* Save the string to create the FNAL file name */
IF_OK status += get_s(stdin, prompt,"kappa", par_buf.kap_label[i] );
IF_OK par_buf.kap[i] = atof(par_buf.kap_label[i]);
IF_OK status += get_s(stdin, prompt,"source_label",
par_buf.src_label_w[i] );
IF_OK status += get_f(stdin, prompt,"d1", &par_buf.d1[i] );
}
IF_OK status += get_i(stdin, prompt,"number_of_smearings", &par_buf.num_smear );
/* We always have a point sink */
par_buf.num_smear++;
strcpy(par_buf.sink_label[0],"d");
par_buf.smearfile[0][0] = '\0';
for(i=1;i<par_buf.num_smear;i++){
IF_OK status += get_s(stdin, prompt,"sink_label", par_buf.sink_label[i] );
IF_OK status += get_s(stdin, prompt,"smear_func_file", par_buf.smearfile[i]);
}
IF_OK status += ask_starting_ksprop (stdin, prompt,
&par_buf.ks_prop_startflag,
par_buf.start_ks_prop_file);
IF_OK status += get_s(stdin, prompt,"mass",
par_buf.mass_label );
IF_OK par_buf.mass = atof(par_buf.mass_label);
/* What file for the resulting correlators? */
IF_OK status += ask_corr_file( stdin, prompt, &par_buf.saveflag_c,
par_buf.savefile_c);
IF_OK status += get_i(stdin, prompt, "log_correlators",
&par_buf.log_correlators);
if( status > 0)par_buf.stopflag=1; else par_buf.stopflag=0;
} /* end if(this_node==0) */
/* read in parameters and coupling constants */
int readin(int prompt) {
/* read in parameters for su3 monte carlo */
/* argument "prompt" is 1 if prompts are to be given for input */
int status;
char savebuf[128];
int i;
int ipair;
/* On node zero, read parameters and send to all other nodes */
if(this_node==0){
printf("\n\n");
status=0;
/*------------------------------------------------------------*/
/* Gauge configuration section */
/*------------------------------------------------------------*/
IF_OK status += ask_starting_lattice(stdin, prompt, ¶m.startflag,
param.startfile );
IF_OK status += get_f(stdin, prompt,"u0", ¶m.u0 );
IF_OK if (prompt!=0)
printf("enter 'no_gauge_fix', or 'coulomb_gauge_fix'\n");
IF_OK scanf("%s",savebuf);
IF_OK printf("%s\n",savebuf);
IF_OK {
if(strcmp("coulomb_gauge_fix",savebuf) == 0 ){
param.fixflag = COULOMB_GAUGE_FIX;
}
else if(strcmp("no_gauge_fix",savebuf) == 0 ) {
param.fixflag = NO_GAUGE_FIX;
}
else{
printf("error in input: fixing_command is invalid\n"); status++;
}
}
/* find out what to do with lattice at end */
IF_OK status += ask_ending_lattice(stdin, prompt, &(param.saveflag),
param.savefile );
IF_OK status += ask_ildg_LFN(stdin, prompt, param.saveflag,
param.stringLFN );
/* APE smearing parameters (if needed) */
/* Zero suppresses APE smearing */
IF_OK status += get_f(stdin, prompt, "staple_weight",
¶m.staple_weight);
IF_OK status += get_i(stdin, prompt, "ape_iter",
¶m.ape_iter);
/*------------------------------------------------------------*/
/* Propagator inversion control */
/*------------------------------------------------------------*/
/* maximum no. of conjugate gradient iterations */
IF_OK status += get_i(stdin,prompt,"max_cg_iterations",
¶m.qic.max );
/* maximum no. of conjugate gradient restarts */
IF_OK status += get_i(stdin,prompt,"max_cg_restarts",
¶m.qic.nrestart );
/* error for clover propagator conjugate gradient */
IF_OK status += get_f(stdin, prompt,"error_for_propagator",
¶m.qic.resid );
IF_OK status += get_f(stdin, prompt,"rel_error_for_propagator",
¶m.qic.relresid );
/* Precision fixed to prevailing precision for now */
param.qic.prec = PRECISION;
param.qic.parity = EVENANDODD;
/*------------------------------------------------------------*/
/* Propagators and their sources */
/*------------------------------------------------------------*/
/* Number of propagators */
IF_OK status += get_i(stdin,prompt,"number_of_propagators",
¶m.num_prop );
if( param.num_prop>MAX_PROP ){
printf("num_prop = %d must be <= %d!\n", param.num_prop, MAX_PROP);
status++;
}
IF_OK for(i = 0; i < param.num_prop; i++){
/* Propagator parameters */
IF_OK status += get_s(stdin, prompt,"propagator_type", savebuf );
IF_OK {
if(strcmp(savebuf,"clover") == 0)param.prop_type[i] = CLOVER_TYPE;
else if(strcmp(savebuf,"KS") == 0)param.prop_type[i] = KS_TYPE;
else {
printf("Unknown quark type %s\n",savebuf);
status++;
}
}
if(param.prop_type[i] == CLOVER_TYPE){
IF_OK status += get_s(stdin, prompt,"kappa", param.kappa_label[i]);
IF_OK param.dcp[i].Kappa = atof(param.kappa_label[i]);
IF_OK status += get_f(stdin, prompt,"clov_c", ¶m.dcp[i].Clov_c );
param.dcp[i].U0 = param.u0;
IF_OK status += get_s(stdin, prompt,"check", savebuf);
IF_OK {
/* Should we be checking the propagator by running the solver? */
if(strcmp(savebuf,"no") == 0)param.check[i] = 0;
else param.check[i] = 1;
}
IF_OK status += ask_starting_wprop( stdin, prompt,
¶m.startflag_w[i],
param.startfile_w[i]);
IF_OK status += ask_ending_wprop( stdin, prompt, ¶m.saveflag_w[i],
param.savefile_w[i]);
/* Get source type */
IF_OK init_wqs(¶m.src_wqs[i]);
IF_OK status += get_w_quark_source( stdin, prompt, ¶m.src_wqs[i]);
} else { /* KS_TYPE */
