static void __init wzrhpg450h_init(void)
{
u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
u8 *mac = (u8 *) ee + 2;
ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
ath79_register_mdio(0, ~BIT(0));
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
wzrhpg450h_leds_gpio);
ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg450h_gpio_keys),
wzrhpg450h_gpio_keys);
ath79_register_eth(0);
gpio_request_one(16, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
ath79_register_usb();
ap91_pci_init(ee, NULL);
ap9x_pci_get_wmac_data(0)->tx_gain_buffalo = true;
ap9x_pci_get_wmac_data(1)->tx_gain_buffalo = true;
ap9x_pci_setup_wmac_led_pin(0, 15);
ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
}
static void __init wzrhpag300h_setup(void)
{
u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.phy_mask = BIT(4);
ath79_register_eth(0);
ath79_register_eth(1);
gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
wzrhpag300h_leds_gpio);
ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpag300h_gpio_keys),
wzrhpag300h_gpio_keys);
ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
ap9x_pci_setup_wmac_led_pin(0, 1);
ap9x_pci_setup_wmac_led_pin(1, 5);
ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio,
ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio));
ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio,
ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio));
}
static void __init wzrhpag300h_setup(void)
{
u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.phy_mask = BIT(4);
ath79_register_eth(0);
ath79_register_eth(1);
ath79_register_usb();
gpio_request(2, "usb");
gpio_direction_output(2, 1);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
wzrhpag300h_leds_gpio);
ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpag300h_gpio_keys),
wzrhpag300h_gpio_keys);
ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
}
static void __init wzrhpg300nh2_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
/* There is an eth1 but it is not connected to the switch */
ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
ath79_register_mdio(0, ~(BIT(0)));
ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_eth(0);
/* gpio13 is usb power. Turn it on. */
gpio_request_one(13, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
wzrhpg300nh2_leds_gpio);
ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
wzrhpg300nh2_gpio_keys);
ap9x_pci_setup_wmac_led_pin(0, 5);
ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
ap91_pci_init(eeprom, mac0);
}
static void __init qihoo_c301_setup(void)
{
ath79_register_m25p80_multi(&flash);
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_WAN,
AR934X_GPIO_OUT_LED_LINK4);
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN1,
AR934X_GPIO_OUT_LED_LINK1);
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN2,
AR934X_GPIO_OUT_LED_LINK2);
ath79_gpio_output_select(QIHOO_C301_GPIO_SPI_CS1,
AR934X_GPIO_OUT_SPI_CS1);
gpio_request_one(QIHOO_C301_GPIO_ETH_LEN_EN,
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
"Ethernet LED enable");
ath79_register_leds_gpio(-1, ARRAY_SIZE(qihoo_c301_leds_gpio),
qihoo_c301_leds_gpio);
ath79_register_gpio_keys_polled(-1, QIHOO_C301_KEYS_POLL_INTERVAL,
ARRAY_SIZE(qihoo_c301_gpio_keys),
qihoo_c301_gpio_keys);
ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0);
ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1);
qihoo_c301_get_mac("wlan24mac=", wlan24mac);
ath79_register_pci();
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
AR934X_ETH_CFG_SW_PHY_SWAP);
ath79_register_mdio(1, 0x0);
/* LAN */
qihoo_c301_get_mac("lanmac=", ath79_eth1_data.mac_addr);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_register_eth(1);
/* WAN */
qihoo_c301_get_mac("wanmac=", ath79_eth0_data.mac_addr);
/* GMAC0 is connected to the PHY4 of the internal switch */
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = BIT(0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_register_eth(0);
gpio_request_one(QIHOO_C301_GPIO_USB_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
ath79_register_usb();
qihoo_c301_board = 1;
}