コード例 #1
0
ファイル: init.c プロジェクト: Anjali05/linux
static void ath9k_reg_notifier(struct wiphy *wiphy,
			       struct regulatory_request *request)
{
	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
	struct ath_softc *sc = hw->priv;
	struct ath_hw *ah = sc->sc_ah;
	struct ath_regulatory *reg = ath9k_hw_regulatory(ah);

	ath_reg_notifier_apply(wiphy, request, reg);

	/* synchronize DFS detector if regulatory domain changed */
	if (sc->dfs_detector != NULL)
		sc->dfs_detector->set_dfs_domain(sc->dfs_detector,
						 request->dfs_region);

	/* Set tx power */
	if (!ah->curchan)
		return;

	sc->cur_chan->txpower = 2 * ah->curchan->chan->max_power;
	ath9k_ps_wakeup(sc);
	ath9k_hw_set_txpowerlimit(ah, sc->cur_chan->txpower, false);
	ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
			       sc->cur_chan->txpower,
			       &sc->cur_chan->cur_txpower);
	ath9k_ps_restore(sc);
}
コード例 #2
0
void ath9k_htc_reset(struct ath9k_htc_priv *priv)
{
	struct ath_hw *ah = priv->ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_channel *channel = priv->hw->conf.chandef.chan;
	struct ath9k_hw_cal_data *caldata = NULL;
	enum htc_phymode mode;
	__be16 htc_mode;
	u8 cmd_rsp;
	int ret;

	mutex_lock(&priv->mutex);
	ath9k_htc_ps_wakeup(priv);

	ath9k_htc_stop_ani(priv);
	ieee80211_stop_queues(priv->hw);

	del_timer_sync(&priv->tx.cleanup_timer);
	ath9k_htc_tx_drain(priv);

	WMI_CMD(WMI_DISABLE_INTR_CMDID);
	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
	WMI_CMD(WMI_STOP_RECV_CMDID);

	ath9k_wmi_event_drain(priv);

	caldata = &priv->caldata;
	ret = ath9k_hw_reset(ah, ah->curchan, caldata, false);
	if (ret) {
		ath_err(common,
			"Unable to reset device (%u Mhz) reset status %d\n",
			channel->center_freq, ret);
	}

	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
			       &priv->curtxpow);

	WMI_CMD(WMI_START_RECV_CMDID);
	ath9k_host_rx_init(priv);

	mode = ath9k_htc_get_curmode(priv, ah->curchan);
	htc_mode = cpu_to_be16(mode);
	WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode);

	WMI_CMD(WMI_ENABLE_INTR_CMDID);
	htc_start(priv->htc);
	ath9k_htc_vif_reconfig(priv);
	ieee80211_wake_queues(priv->hw);

	mod_timer(&priv->tx.cleanup_timer,
		  jiffies + msecs_to_jiffies(ATH9K_HTC_TX_CLEANUP_INTERVAL));

	ath9k_htc_ps_restore(priv);
	mutex_unlock(&priv->mutex);
}
コード例 #3
0
void ath9k_htc_reset(struct ath9k_htc_priv *priv)
{
	struct ath_hw *ah = priv->ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_channel *channel = priv->hw->conf.channel;
	struct ath9k_hw_cal_data *caldata = NULL;
	enum htc_phymode mode;
	__be16 htc_mode;
	u8 cmd_rsp;
	int ret;

	mutex_lock(&priv->mutex);
	ath9k_htc_ps_wakeup(priv);

	if (priv->op_flags & OP_ASSOCIATED)
		cancel_delayed_work_sync(&priv->ath9k_ani_work);

	ieee80211_stop_queues(priv->hw);
	htc_stop(priv->htc);
	WMI_CMD(WMI_DISABLE_INTR_CMDID);
	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
	WMI_CMD(WMI_STOP_RECV_CMDID);

	caldata = &priv->caldata;
	ret = ath9k_hw_reset(ah, ah->curchan, caldata, false);
	if (ret) {
		ath_err(common,
			"Unable to reset device (%u Mhz) reset status %d\n",
			channel->center_freq, ret);
	}

	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
			       &priv->curtxpow);

	WMI_CMD(WMI_START_RECV_CMDID);
	ath9k_host_rx_init(priv);

	mode = ath9k_htc_get_curmode(priv, ah->curchan);
	htc_mode = cpu_to_be16(mode);
	WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode);

	WMI_CMD(WMI_ENABLE_INTR_CMDID);
	htc_start(priv->htc);

	if (priv->op_flags & OP_ASSOCIATED) {
		ath9k_htc_beacon_config(priv, priv->vif);
		ath_start_ani(priv);
	}

	ieee80211_wake_queues(priv->hw);

	ath9k_htc_ps_restore(priv);
	mutex_unlock(&priv->mutex);
}
コード例 #4
0
static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
{
	struct ath_hw *ah = sc->sc_ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_channel *channel = hw->conf.channel;
	int r;

	ath9k_ps_wakeup(sc);
	spin_lock_bh(&sc->sc_pcu_lock);

	ath9k_hw_configpcipowersave(ah, 0, 0);

	if (!ah->curchan)
		ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);

	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
	if (r) {
		ath_err(common,
			"Unable to reset channel (%u MHz), reset status %d\n",
			channel->center_freq, r);
	}

	ath9k_cmn_update_txpow(ah, sc->curtxpow,
			       sc->config.txpowlimit, &sc->curtxpow);
	if (ath_startrecv(sc) != 0) {
		ath_err(common, "Unable to restart recv logic\n");
		goto out;
	}
	if (sc->sc_flags & SC_OP_BEACONS)
		ath_set_beacon(sc);	/* restart beacons */

	/* Re-Enable  interrupts */
	ath9k_hw_set_interrupts(ah, ah->imask);

	/* Enable LED */
	ath9k_hw_cfg_output(ah, ah->led_pin,
			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
	ath9k_hw_set_gpio(ah, ah->led_pin, 0);

	ieee80211_wake_queues(hw);
	ieee80211_queue_delayed_work(hw, &sc->hw_pll_work, HZ/2);

out:
	spin_unlock_bh(&sc->sc_pcu_lock);

	ath9k_ps_restore(sc);
}
コード例 #5
0
ファイル: htc_drv_gpio.c プロジェクト: 119-org/hi3518-osdrv
void ath9k_htc_radio_enable(struct ieee80211_hw *hw)
{
	struct ath9k_htc_priv *priv = hw->priv;
	struct ath_hw *ah = priv->ah;
	struct ath_common *common = ath9k_hw_common(ah);
	int ret;
	u8 cmd_rsp;

	if (!ah->curchan)
		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);

	/* Reset the HW */
	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
	if (ret) {
		ath_err(common,
			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
			ret, ah->curchan->channel);
	}

	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
			       &priv->curtxpow);

	/* Start RX */
	WMI_CMD(WMI_START_RECV_CMDID);
	ath9k_host_rx_init(priv);

	/* Start TX */
	htc_start(priv->htc);
	spin_lock_bh(&priv->tx.tx_lock);
	priv->tx.flags &= ~ATH9K_HTC_OP_TX_QUEUES_STOP;
	spin_unlock_bh(&priv->tx.tx_lock);
	ieee80211_wake_queues(hw);

	WMI_CMD(WMI_ENABLE_INTR_CMDID);

	/* Enable LED */
	ath9k_hw_cfg_output(ah, ah->led_pin,
			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
	ath9k_hw_set_gpio(ah, ah->led_pin, 0);
}
コード例 #6
0
static int ath9k_htc_start(struct ieee80211_hw *hw)
{
	struct ath9k_htc_priv *priv = hw->priv;
	struct ath_hw *ah = priv->ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_channel *curchan = hw->conf.chandef.chan;
	struct ath9k_channel *init_channel;
	int ret = 0;
	enum htc_phymode mode;
	__be16 htc_mode;
	u8 cmd_rsp;

	mutex_lock(&priv->mutex);

	ath_dbg(common, CONFIG,
		"Starting driver with initial channel: %d MHz\n",
		curchan->center_freq);

	/* Ensure that HW is awake before flushing RX */
	ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
	WMI_CMD(WMI_FLUSH_RECV_CMDID);

	/* setup initial channel */
	init_channel = ath9k_cmn_get_channel(hw, ah, &hw->conf.chandef);

	ret = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
	if (ret) {
		ath_err(common,
			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
			ret, curchan->center_freq);
		mutex_unlock(&priv->mutex);
		return ret;
	}

	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
			       &priv->curtxpow);

	mode = ath9k_htc_get_curmode(priv, init_channel);
	htc_mode = cpu_to_be16(mode);
	WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode);
	WMI_CMD(WMI_ATH_INIT_CMDID);
	WMI_CMD(WMI_START_RECV_CMDID);

	ath9k_host_rx_init(priv);

	ret = ath9k_htc_update_cap_target(priv, 0);
	if (ret)
		ath_dbg(common, CONFIG,
			"Failed to update capability in target\n");

	clear_bit(ATH_OP_INVALID, &common->op_flags);
	htc_start(priv->htc);

	spin_lock_bh(&priv->tx.tx_lock);
	priv->tx.flags &= ~ATH9K_HTC_OP_TX_QUEUES_STOP;
	spin_unlock_bh(&priv->tx.tx_lock);

	ieee80211_wake_queues(hw);

	mod_timer(&priv->tx.cleanup_timer,
		  jiffies + msecs_to_jiffies(ATH9K_HTC_TX_CLEANUP_INTERVAL));

	ath9k_htc_start_btcoex(priv);

	mutex_unlock(&priv->mutex);

	return ret;
}
コード例 #7
0
static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
				 struct ieee80211_hw *hw,
				 struct ath9k_channel *hchan)
{
	struct ath_hw *ah = priv->ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_conf *conf = &common->hw->conf;
	bool fastcc;
	struct ieee80211_channel *channel = hw->conf.chandef.chan;
	struct ath9k_hw_cal_data *caldata = NULL;
	enum htc_phymode mode;
	__be16 htc_mode;
	u8 cmd_rsp;
	int ret;

	if (test_bit(ATH_OP_INVALID, &common->op_flags))
		return -EIO;

	fastcc = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);

	ath9k_htc_ps_wakeup(priv);

	ath9k_htc_stop_ani(priv);
	del_timer_sync(&priv->tx.cleanup_timer);
	ath9k_htc_tx_drain(priv);

	WMI_CMD(WMI_DISABLE_INTR_CMDID);
	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
	WMI_CMD(WMI_STOP_RECV_CMDID);

	ath9k_wmi_event_drain(priv);

	ath_dbg(common, CONFIG,
		"(%u MHz) -> (%u MHz), HT: %d, HT40: %d fastcc: %d\n",
		priv->ah->curchan->channel,
		channel->center_freq, conf_is_ht(conf), conf_is_ht40(conf),
		fastcc);

	if (!fastcc)
		caldata = &priv->caldata;

	ret = ath9k_hw_reset(ah, hchan, caldata, fastcc);
	if (ret) {
		ath_err(common,
			"Unable to reset channel (%u Mhz) reset status %d\n",
			channel->center_freq, ret);
		goto err;
	}

	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
			       &priv->curtxpow);

	WMI_CMD(WMI_START_RECV_CMDID);
	if (ret)
		goto err;

	ath9k_host_rx_init(priv);

	mode = ath9k_htc_get_curmode(priv, hchan);
	htc_mode = cpu_to_be16(mode);
	WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode);
	if (ret)
		goto err;

	WMI_CMD(WMI_ENABLE_INTR_CMDID);
	if (ret)
		goto err;

	htc_start(priv->htc);

	if (!test_bit(ATH_OP_SCANNING, &common->op_flags) &&
	    !(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
		ath9k_htc_vif_reconfig(priv);

	mod_timer(&priv->tx.cleanup_timer,
		  jiffies + msecs_to_jiffies(ATH9K_HTC_TX_CLEANUP_INTERVAL));

err:
	ath9k_htc_ps_restore(priv);
	return ret;
}
コード例 #8
0
static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
{
	struct ath9k_htc_priv *priv = hw->priv;
	struct ath_common *common = ath9k_hw_common(priv->ah);
	struct ieee80211_conf *conf = &hw->conf;
	bool chip_reset = false;
	int ret = 0;

	mutex_lock(&priv->mutex);
	ath9k_htc_ps_wakeup(priv);

	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
		mutex_lock(&priv->htc_pm_lock);

		priv->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
		if (!priv->ps_idle)
			chip_reset = true;

		mutex_unlock(&priv->htc_pm_lock);
	}

	/*
	 * Monitor interface should be added before
	 * IEEE80211_CONF_CHANGE_CHANNEL is handled.
	 */
	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
		if ((conf->flags & IEEE80211_CONF_MONITOR) &&
		    !priv->ah->is_monitoring)
			ath9k_htc_add_monitor_interface(priv);
		else if (priv->ah->is_monitoring)
			ath9k_htc_remove_monitor_interface(priv);
	}

	if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || chip_reset) {
		struct ieee80211_channel *curchan = hw->conf.chandef.chan;
		int pos = curchan->hw_value;

		ath_dbg(common, CONFIG, "Set channel: %d MHz\n",
			curchan->center_freq);

		ath9k_cmn_get_channel(hw, priv->ah, &hw->conf.chandef);
		if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
			ath_err(common, "Unable to set channel\n");
			ret = -EINVAL;
			goto out;
		}

	}

	if (changed & IEEE80211_CONF_CHANGE_PS) {
		if (conf->flags & IEEE80211_CONF_PS) {
			ath9k_htc_setpower(priv, ATH9K_PM_NETWORK_SLEEP);
			priv->ps_enabled = true;
		} else {
			priv->ps_enabled = false;
			cancel_work_sync(&priv->ps_work);
			ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
		}
	}

	if (changed & IEEE80211_CONF_CHANGE_POWER) {
		priv->txpowlimit = 2 * conf->power_level;
		ath9k_cmn_update_txpow(priv->ah, priv->curtxpow,
				       priv->txpowlimit, &priv->curtxpow);
	}

out:
	ath9k_htc_ps_restore(priv);
	mutex_unlock(&priv->mutex);
	return ret;
}
コード例 #9
0
/*
 * Set/change channels.  If the channel is really being changed, it's done
 * by reseting the chip.  To accomplish this we must first cleanup any pending
 * DMA, then restart stuff.
*/
static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
		    struct ath9k_channel *hchan)
{
	struct ath_hw *ah = sc->sc_ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_conf *conf = &common->hw->conf;
	bool fastcc = true, stopped;
	struct ieee80211_channel *channel = hw->conf.channel;
	struct ath9k_hw_cal_data *caldata = NULL;
	int r;

	if (sc->sc_flags & SC_OP_INVALID)
		return -EIO;

	sc->hw_busy_count = 0;

	del_timer_sync(&common->ani.timer);
	cancel_work_sync(&sc->paprd_work);
	cancel_work_sync(&sc->hw_check_work);
	cancel_delayed_work_sync(&sc->tx_complete_work);
	cancel_delayed_work_sync(&sc->hw_pll_work);

	ath9k_ps_wakeup(sc);

	spin_lock_bh(&sc->sc_pcu_lock);

	/*
	 * This is only performed if the channel settings have
	 * actually changed.
	 *
	 * To switch channels clear any pending DMA operations;
	 * wait long enough for the RX fifo to drain, reset the
	 * hardware at the new frequency, and then re-enable
	 * the relevant bits of the h/w.
	 */
	ath9k_hw_disable_interrupts(ah);
	stopped = ath_drain_all_txq(sc, false);

	if (!ath_stoprecv(sc))
		stopped = false;

	if (!ath9k_hw_check_alive(ah))
		stopped = false;

	/* XXX: do not flush receive queue here. We don't want
	 * to flush data frames already in queue because of
	 * changing channel. */

	if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
		fastcc = false;

	if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
		caldata = &sc->caldata;

	ath_dbg(common, ATH_DBG_CONFIG,
		"(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
		sc->sc_ah->curchan->channel,
		channel->center_freq, conf_is_ht40(conf),
		fastcc);

	r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
	if (r) {
		ath_err(common,
			"Unable to reset channel (%u MHz), reset status %d\n",
			channel->center_freq, r);
		goto ps_restore;
	}

	if (ath_startrecv(sc) != 0) {
		ath_err(common, "Unable to restart recv logic\n");
		r = -EIO;
		goto ps_restore;
	}

	ath9k_cmn_update_txpow(ah, sc->curtxpow,
			       sc->config.txpowlimit, &sc->curtxpow);
	ath9k_hw_set_interrupts(ah, ah->imask);

	if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
		if (sc->sc_flags & SC_OP_BEACONS)
			ath_set_beacon(sc);
		ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
		ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
		if (!common->disable_ani)
			ath_start_ani(common);
	}

 ps_restore:
	ieee80211_wake_queues(hw);

	spin_unlock_bh(&sc->sc_pcu_lock);

	ath9k_ps_restore(sc);
	return r;
}
コード例 #10
0
static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
{
	struct ath9k_htc_priv *priv = hw->priv;
	struct ath_common *common = ath9k_hw_common(priv->ah);
	struct ieee80211_conf *conf = &hw->conf;

	mutex_lock(&priv->mutex);

	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
		bool enable_radio = false;
		bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);

		mutex_lock(&priv->htc_pm_lock);
		if (!idle && priv->ps_idle)
			enable_radio = true;
		priv->ps_idle = idle;
		mutex_unlock(&priv->htc_pm_lock);

		if (enable_radio) {
			ath_dbg(common, CONFIG, "not-idle: enabling radio\n");
			ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
			ath9k_htc_radio_enable(hw);
		}
	}

	/*
	 * Monitor interface should be added before
	 * IEEE80211_CONF_CHANGE_CHANNEL is handled.
	 */
	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
		if ((conf->flags & IEEE80211_CONF_MONITOR) &&
		    !priv->ah->is_monitoring)
			ath9k_htc_add_monitor_interface(priv);
		else if (priv->ah->is_monitoring)
			ath9k_htc_remove_monitor_interface(priv);
	}

	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
		struct ieee80211_channel *curchan = hw->conf.channel;
		int pos = curchan->hw_value;

		ath_dbg(common, CONFIG, "Set channel: %d MHz\n",
			curchan->center_freq);

		ath9k_cmn_update_ichannel(&priv->ah->channels[pos],
					  hw->conf.channel,
					  hw->conf.channel_type);

		if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
			ath_err(common, "Unable to set channel\n");
			mutex_unlock(&priv->mutex);
			return -EINVAL;
		}

	}

	if (changed & IEEE80211_CONF_CHANGE_PS) {
		if (conf->flags & IEEE80211_CONF_PS) {
			ath9k_htc_setpower(priv, ATH9K_PM_NETWORK_SLEEP);
			priv->ps_enabled = true;
		} else {
			priv->ps_enabled = false;
			cancel_work_sync(&priv->ps_work);
			ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
		}
	}

	if (changed & IEEE80211_CONF_CHANGE_POWER) {
		priv->txpowlimit = 2 * conf->power_level;
		ath9k_cmn_update_txpow(priv->ah, priv->curtxpow,
				       priv->txpowlimit, &priv->curtxpow);
	}

	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
		mutex_lock(&priv->htc_pm_lock);
		if (!priv->ps_idle) {
			mutex_unlock(&priv->htc_pm_lock);
			goto out;
		}
		mutex_unlock(&priv->htc_pm_lock);

		ath_dbg(common, CONFIG, "idle: disabling radio\n");
		ath9k_htc_radio_disable(hw);
	}

out:
	mutex_unlock(&priv->mutex);
	return 0;
}
コード例 #11
0
static int ath9k_htc_start(struct ieee80211_hw *hw)
{
	struct ath9k_htc_priv *priv = hw->priv;
	struct ath_hw *ah = priv->ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_channel *curchan = hw->conf.channel;
	struct ath9k_channel *init_channel;
	int ret = 0;
	enum htc_phymode mode;
	__be16 htc_mode;
	u8 cmd_rsp;

	mutex_lock(&priv->mutex);

	ath_dbg(common, ATH_DBG_CONFIG,
		"Starting driver with initial channel: %d MHz\n",
		curchan->center_freq);

	/* Ensure that HW is awake before flushing RX */
	ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
	WMI_CMD(WMI_FLUSH_RECV_CMDID);

	/* setup initial channel */
	init_channel = ath9k_cmn_get_curchannel(hw, ah);

	ath9k_hw_htc_resetinit(ah);
	ret = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
	if (ret) {
		ath_err(common,
			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
			ret, curchan->center_freq);
		mutex_unlock(&priv->mutex);
		return ret;
	}

	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
			       &priv->curtxpow);

	mode = ath9k_htc_get_curmode(priv, init_channel);
	htc_mode = cpu_to_be16(mode);
	WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode);
	WMI_CMD(WMI_ATH_INIT_CMDID);
	WMI_CMD(WMI_START_RECV_CMDID);

	ath9k_host_rx_init(priv);

	priv->op_flags &= ~OP_INVALID;
	htc_start(priv->htc);

	spin_lock_bh(&priv->tx_lock);
	priv->tx_queues_stop = false;
	spin_unlock_bh(&priv->tx_lock);

	ieee80211_wake_queues(hw);

	if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) {
		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
					   AR_STOMP_LOW_WLAN_WGHT);
		ath9k_hw_btcoex_enable(ah);
		ath_htc_resume_btcoex_work(priv);
	}
	mutex_unlock(&priv->mutex);

	return ret;
}
コード例 #12
0
static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
				 struct ieee80211_hw *hw,
				 struct ath9k_channel *hchan)
{
	struct ath_hw *ah = priv->ah;
	struct ath_common *common = ath9k_hw_common(ah);
	struct ieee80211_conf *conf = &common->hw->conf;
	bool fastcc;
	struct ieee80211_channel *channel = hw->conf.channel;
	struct ath9k_hw_cal_data *caldata;
	enum htc_phymode mode;
	__be16 htc_mode;
	u8 cmd_rsp;
	int ret;

	if (priv->op_flags & OP_INVALID)
		return -EIO;

	fastcc = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);

	ath9k_htc_ps_wakeup(priv);
	htc_stop(priv->htc);
	WMI_CMD(WMI_DISABLE_INTR_CMDID);
	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
	WMI_CMD(WMI_STOP_RECV_CMDID);

	ath_dbg(common, ATH_DBG_CONFIG,
		"(%u MHz) -> (%u MHz), HT: %d, HT40: %d fastcc: %d\n",
		priv->ah->curchan->channel,
		channel->center_freq, conf_is_ht(conf), conf_is_ht40(conf),
		fastcc);

	if (!fastcc)
		caldata = &priv->caldata;
	ret = ath9k_hw_reset(ah, hchan, caldata, fastcc);
	if (ret) {
		ath_err(common,
			"Unable to reset channel (%u Mhz) reset status %d\n",
			channel->center_freq, ret);
		goto err;
	}

	ath9k_cmn_update_txpow(ah, priv->curtxpow, priv->txpowlimit,
			       &priv->curtxpow);

	WMI_CMD(WMI_START_RECV_CMDID);
	if (ret)
		goto err;

	ath9k_host_rx_init(priv);

	mode = ath9k_htc_get_curmode(priv, hchan);
	htc_mode = cpu_to_be16(mode);
	WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode);
	if (ret)
		goto err;

	WMI_CMD(WMI_ENABLE_INTR_CMDID);
	if (ret)
		goto err;

	htc_start(priv->htc);
err:
	ath9k_htc_ps_restore(priv);
	return ret;
}