void BookmarkManager::setIsAvailable(bool available)
{
if (available != isAvailable_) {
isAvailable_ = available;
emit availabilityChanged();
}
}
void NetworkManager::connectToConnman(QString)
{
disconnectFromConnman();
m_manager = new Manager("net.connman", "/",
QDBusConnection::systemBus(), this);
if (!m_manager->isValid()) {
pr_dbg() << "D-Bus net.connman.Manager object is invalid. Connman may not be running or is invalid.";
delete m_manager;
m_manager = NULL;
// shouldn't happen but in this case service isn't available
if(m_available)
emit availabilityChanged(m_available = false);
} else {
QDBusPendingReply<QVariantMap> props_reply = m_manager->GetProperties();
m_getPropertiesWatcher = new QDBusPendingCallWatcher(props_reply, m_manager);
connect(m_getPropertiesWatcher,
SIGNAL(finished(QDBusPendingCallWatcher*)),
this,
SLOT(getPropertiesReply(QDBusPendingCallWatcher*)));
QDBusPendingReply<ConnmanObjectList> techs_reply = m_manager->GetTechnologies();
m_getTechnologiesWatcher = new QDBusPendingCallWatcher(techs_reply, m_manager);
connect(m_getTechnologiesWatcher,
SIGNAL(finished(QDBusPendingCallWatcher*)),
this,
SLOT(getTechnologiesReply(QDBusPendingCallWatcher*)));
QDBusPendingReply<ConnmanObjectList> services_reply = m_manager->GetServices();
m_getServicesWatcher = new QDBusPendingCallWatcher(services_reply, m_manager);
connect(m_getServicesWatcher,
SIGNAL(finished(QDBusPendingCallWatcher*)),
this,
SLOT(getServicesReply(QDBusPendingCallWatcher*)));
if(!m_available)
emit availabilityChanged(m_available = true);
pr_dbg() << "Connected";
}
}
void TechnologyModel::updateTechnologies()
{
bool wasAvailable = m_manager->isAvailable() && m_tech;
doUpdateTechnologies();
bool isAvailable = m_manager->isAvailable() && m_tech;
if (wasAvailable != isAvailable)
Q_EMIT availabilityChanged(isAvailable);
}
void ResourcePolicyInt::handleResourcesBecameAvailable(const QList<ResourcePolicy::ResourceType> &resources)
{
bool available = false;
for (int i = 0; i < resources.size(); ++i) {
if (resources.at(i) == ResourcePolicy::AudioPlaybackType)
available = true;
}
availabilityChanged(available);
}
void NetworkManager::connectToConnman(QString)
{
disconnectFromConnman();
m_manager = new NetConnmanManagerInterface("net.connman", "/",
QDBusConnection::systemBus(), this);
if (!m_manager->isValid()) {
delete m_manager;
m_manager = NULL;
// shouldn't happen but in this case service isn't available
if(m_available)
emit availabilityChanged(m_available = false);
} else {
QDBusPendingReply<QVariantMap> props_reply = m_manager->GetProperties();
props_reply.waitForFinished();
if (!props_reply.isError()) {
m_propertiesCache = props_reply.value();
emit stateChanged(m_propertiesCache[State].toString());
connect(m_manager,
SIGNAL(PropertyChanged(const QString&, const QDBusVariant&)),
this,
SLOT(propertyChanged(const QString&, const QDBusVariant&)));
}
setupTechnologies();
setupServices();
if(!m_available)
emit availabilityChanged(m_available = true);
pr_dbg() << "Connected";
}
void GriloQuery::availableSourcesChanged() {
bool available = isAvailable();
if (m_available != available) {
m_available = available;
emit availabilityChanged();
}
if (!m_available && m_opId) {
// A source has disappeared while an operation is already running.
// Most grilo will crash soon but we will just reset the opId
m_opId = 0;
}
}
void QDeclarativeRadioData::connectSignals()
{
connect(m_radioData, SIGNAL(programTypeChanged(QRadioData::ProgramType)), this,
SLOT(_q_programTypeChanged(QRadioData::ProgramType)));
connect(m_radioData, SIGNAL(stationIdChanged(QString)), this, SIGNAL(stationIdChanged(QString)));
connect(m_radioData, SIGNAL(programTypeNameChanged(QString)), this, SIGNAL(programTypeNameChanged(QString)));
connect(m_radioData, SIGNAL(stationNameChanged(QString)), this, SIGNAL(stationNameChanged(QString)));
connect(m_radioData, SIGNAL(radioTextChanged(QString)), this, SIGNAL(radioTextChanged(QString)));
connect(m_radioData, SIGNAL(alternativeFrequenciesEnabledChanged(bool)), this,
SIGNAL(alternativeFrequenciesEnabledChanged(bool)));
// Since the radio data type depends on the service for the tuner, the availability is also dictated from the tuner
connect(m_radioTuner, SIGNAL(availabilityChanged(QMultimedia::AvailabilityStatus)), this, SLOT(_q_availabilityChanged(QMultimedia::AvailabilityStatus)));
connect(m_radioData, SIGNAL(error(QRadioData::Error)), this, SLOT(_q_error(QRadioData::Error)));
}
void QDeclarativeAudio::classBegin()
{
m_player = new QMediaPlayer(this);
connect(m_player, SIGNAL(stateChanged(QMediaPlayer::State)),
this, SLOT(_q_statusChanged()));
connect(m_player, SIGNAL(mediaStatusChanged(QMediaPlayer::MediaStatus)),
this, SLOT(_q_statusChanged()));
connect(m_player, SIGNAL(mediaChanged(QMediaContent)),
this, SIGNAL(sourceChanged()));
connect(m_player, SIGNAL(durationChanged(qint64)),
this, SIGNAL(durationChanged()));
connect(m_player, SIGNAL(positionChanged(qint64)),
this, SIGNAL(positionChanged()));
connect(m_player, SIGNAL(volumeChanged(int)),
this, SIGNAL(volumeChanged()));
connect(m_player, SIGNAL(mutedChanged(bool)),
this, SIGNAL(mutedChanged()));
connect(m_player, SIGNAL(bufferStatusChanged(int)),
this, SIGNAL(bufferProgressChanged()));
connect(m_player, SIGNAL(seekableChanged(bool)),
this, SIGNAL(seekableChanged()));
connect(m_player, SIGNAL(playbackRateChanged(qreal)),
this, SIGNAL(playbackRateChanged()));
connect(m_player, SIGNAL(error(QMediaPlayer::Error)),
this, SLOT(_q_error(QMediaPlayer::Error)));
connect(m_player, SIGNAL(audioAvailableChanged(bool)),
this, SIGNAL(hasAudioChanged()));
connect(m_player, SIGNAL(videoAvailableChanged(bool)),
this, SIGNAL(hasVideoChanged()));
m_error = m_player->availability() == QMultimedia::ServiceMissing ? QMediaPlayer::ServiceMissingError : QMediaPlayer::NoError;
connect(m_player, SIGNAL(availabilityChanged(QMultimedia::AvailabilityStatus)),
this, SLOT(_q_availabilityChanged(QMultimedia::AvailabilityStatus)));
m_metaData.reset(new QDeclarativeMediaMetaData(m_player));
connect(m_player, SIGNAL(metaDataChanged()),
m_metaData.data(), SIGNAL(metaDataChanged()));
emit mediaObjectChanged();
}
/*!
Construct a declarative camera object using \a parent object.
*/
QDeclarativeCamera::QDeclarativeCamera(QObject *parent) :
QObject(parent),
m_camera(0),
m_metaData(0),
m_viewfinder(0),
m_pendingState(ActiveState),
m_componentComplete(false)
{
m_camera = new QCamera;
m_currentCameraInfo = QCameraInfo(*m_camera);
m_imageCapture = new QDeclarativeCameraCapture(m_camera);
m_videoRecorder = new QDeclarativeCameraRecorder(m_camera);
m_exposure = new QDeclarativeCameraExposure(m_camera);
m_flash = new QDeclarativeCameraFlash(m_camera);
m_focus = new QDeclarativeCameraFocus(m_camera);
m_imageProcessing = new QDeclarativeCameraImageProcessing(m_camera);
connect(m_camera, SIGNAL(captureModeChanged(QCamera::CaptureModes)),
this, SIGNAL(captureModeChanged()));
connect(m_camera, SIGNAL(lockStatusChanged(QCamera::LockStatus,QCamera::LockChangeReason)),
this, SIGNAL(lockStatusChanged()));
connect(m_camera, &QCamera::stateChanged, this, &QDeclarativeCamera::_q_updateState);
connect(m_camera, SIGNAL(statusChanged(QCamera::Status)), this, SIGNAL(cameraStatusChanged()));
connect(m_camera, SIGNAL(error(QCamera::Error)), this, SLOT(_q_error(QCamera::Error)));
connect(m_camera, SIGNAL(availabilityChanged(QMultimedia::AvailabilityStatus)),
this, SLOT(_q_availabilityChanged(QMultimedia::AvailabilityStatus)));
connect(m_camera->focus(), &QCameraFocus::opticalZoomChanged,
this, &QDeclarativeCamera::opticalZoomChanged);
connect(m_camera->focus(), &QCameraFocus::digitalZoomChanged,
this, &QDeclarativeCamera::digitalZoomChanged);
connect(m_camera->focus(), &QCameraFocus::maximumOpticalZoomChanged,
this, &QDeclarativeCamera::maximumOpticalZoomChanged);
connect(m_camera->focus(), &QCameraFocus::maximumDigitalZoomChanged,
this, &QDeclarativeCamera::maximumDigitalZoomChanged);
}
void QDeclarativeAudio::_q_availabilityChanged(QMultimedia::AvailabilityStatus)
{
emit availabilityChanged(availability());
}
void QDeclarativeCamera::_q_availabilityChanged(QMultimedia::AvailabilityStatus availability)
{
emit availabilityChanged(Availability(availability));
}
void FSMonitor::setAvailable(bool available) {
if (m_available != available) {
m_available = available;
emit availabilityChanged();
}
}
void StelVideoMgr::loadVideo(const QString& filename, const QString& id, const float x, const float y, const bool show, const float alpha)
{
if (videoObjects.contains(id))
{
qWarning() << "[StelVideoMgr] Video object with ID" << id << "already exists, dropping it";
dropVideo(id);
}
videoObjects[id] = new VideoPlayer;
videoObjects[id]->videoItem= new QGraphicsVideoItem();
// This sets a tiny size so that if window should appear before proper resize, it should not disturb.
videoObjects[id]->videoItem->setSize(QSizeF(1,1));
videoObjects[id]->player = new QMediaPlayer(0, QMediaPlayer::VideoSurface);
videoObjects[id]->duration=-1; // -1 to signal "unknown".
videoObjects[id]->resolution=QSize(); // initialize with "invalid" empty resolution, we must detect this when player is starting!
videoObjects[id]->keepVisible=false;
videoObjects[id]->needResize=true; // resolution and target frame not yet known.
videoObjects[id]->simplePlay=true;
videoObjects[id]->targetFrameSize=QSizeF(); // start with invalid, depends on parameters given in playVideo(), playPopoutVideo() and resolution detected only after playing started.
videoObjects[id]->popupOrigin=QPointF();
videoObjects[id]->popupTargetCenter=QPointF();
videoObjects[id]->player->setProperty("Stel_id", id); // allow tracking of log messages and access of members.
videoObjects[id]->player->setVideoOutput(videoObjects[id]->videoItem);
videoObjects[id]->videoItem->setOpacity(alpha);
#ifndef Q_OS_WIN
// There is a notable difference: on Windows this causes a crash. On Linux, it is required, else the movie frame is visible before proper resize.
videoObjects[id]->videoItem->setVisible(show);
#endif
videoObjects[id]->lastPos=-1;
// A few connections are not really needed, they are signals we don't use. TBD: Remove or keep commented out?
connect(videoObjects[id]->player, SIGNAL(bufferStatusChanged(int)), this, SLOT(handleBufferStatusChanged(int)));
connect(videoObjects[id]->player, SIGNAL(durationChanged(qint64)), this, SLOT(handleDurationChanged(qint64))); // (CRITICALLY IMPORTANT!)
connect(videoObjects[id]->player, SIGNAL(error(QMediaPlayer::Error)), this, SLOT(handleError(QMediaPlayer::Error)));
connect(videoObjects[id]->player, SIGNAL(mediaStatusChanged(QMediaPlayer::MediaStatus)), this, SLOT(handleMediaStatusChanged(QMediaPlayer::MediaStatus)));
//connect(videoObjects[id]->player, SIGNAL(positionChanged(qint64)), this, SLOT(handlePositionChanged(qint64)));
// we test isSeekable() where needed, so only debug log entry. --> And we may use the signal however now during blocking load below!
connect(videoObjects[id]->player, SIGNAL(seekableChanged(bool)), this, SLOT(handleSeekableChanged(bool)));
connect(videoObjects[id]->player, SIGNAL(stateChanged(QMediaPlayer::State)), this, SLOT(handleStateChanged(QMediaPlayer::State)));
connect(videoObjects[id]->player, SIGNAL(videoAvailableChanged(bool)), this, SLOT(handleVideoAvailableChanged(bool)));
connect(videoObjects[id]->player, SIGNAL(audioAvailableChanged(bool)), this, SLOT(handleAudioAvailableChanged(bool)));
connect(videoObjects[id]->player, SIGNAL(mutedChanged(bool)), this, SLOT(handleMutedChanged(bool)));
connect(videoObjects[id]->player, SIGNAL(volumeChanged(int)), this, SLOT(handleVolumeChanged(int)));
connect(videoObjects[id]->player, SIGNAL(availabilityChanged(bool)), this, SLOT(handleAvailabilityChanged(bool)));
connect(videoObjects[id]->player, SIGNAL(availabilityChanged(QMultimedia::AvailabilityStatus)), this, SLOT(handleAvailabilityChanged(QMultimedia::AvailabilityStatus)));
// Only this is triggered also on Windows. Lets us read resolution etc. (CRITICALLY IMPORTANT!)
connect(videoObjects[id]->player, SIGNAL(metaDataChanged()), this, SLOT(handleMetaDataChanged()));
// That signal would require less overhead, but is not triggered under Windows and apparently also not on MacOS X. (QTBUG-42034.)
// If this becomes available/bugfixed, it should be preferred as being more elegant.
// connect(videoObjects[id]->player, SIGNAL(metaDataChanged(QString,QVariant)), this, SLOT(handleMetaDataChanged(QString,QVariant)));
// We need an absolute pathname here.
QMediaContent content(QUrl::fromLocalFile(QFileInfo(filename).absoluteFilePath()));
videoObjects[id]->player->setMedia(content);
if (verbose)
{
qDebug() << "Loading " << content.canonicalUrl();
qDebug() << "Media Resources queried from player:";
qDebug() << "\tSTATUS: " << videoObjects[id]->player->mediaStatus();
qDebug() << "\tFile: " << videoObjects[id]->player->currentMedia().canonicalUrl();
}
// qDebug() << "scene->addItem...";
StelMainView::getInstance().scene()->addItem(videoObjects[id]->videoItem);
// qDebug() << "scene->addItem OK";
videoObjects[id]->videoItem->setPos(x, y);
// DEFAULT SIZE: show a tiny frame. This gets updated to native resolution as soon as resolution becomes known. Needed?
//videoObjects[id]->videoItem->setSize(QSizeF(1, 1));
// after many troubles with incompletely loaded files we attempt a blocking load from https://wiki.qt.io/Seek_in_Sound_File
// This may be no longer required. But please keep the block here for testing/reactivation if necessary.
// if (! videoObjects[id]->player->isSeekable())
// {
// qDebug() << "Not Seekable!";
// if (verbose)
// qDebug() << "Blocking load ...";
// QEventLoop loop;
// QTimer timer;
// qDebug() << "Not Seekable: setSingleShot";
// timer.setSingleShot(true);
// timer.setInterval(5000); // 5 seconds, may be too long?
// qDebug() << "Not Seekable: connect...";
// loop.connect(&timer, SIGNAL (timeout()), &loop, SLOT (quit()) );
// loop.connect(videoObjects[id]->player, SIGNAL (seekableChanged(bool)), &loop, SLOT (quit()));
// qDebug() << "Not Seekable: loop...";
// loop.exec();
// if (verbose)
// qDebug() << "Blocking load finished, should be seekable now or 5s are over.";
// }
if (verbose)
qDebug() << "Loaded video" << id << "for pos " << x << "/" << y << "Size" << videoObjects[id]->videoItem->size();
videoObjects[id]->player->setPosition(0); // This should force triggering a metadataAvailable() with resolution update.
if (show)
videoObjects[id]->player->play();
else
videoObjects[id]->player->pause();
}
void QGStreamerAvailabilityControl::handleAvailabilityChanged()
{
emit availabilityChanged(this->availability());
}
