C++ (Cpp) bat_led_set_colorの例

コード例 #1

ファイル: led.c プロジェクト: akappy7/ChromeOS_EC_LED_Diagnostics

static void big_led_set_battery(void)
{
	static int battery_second;
	uint32_t chflags = charge_get_flags();

	battery_second++;

	/* BAT LED behavior:
	 * Fully charged / idle: Blue
	 * Force idle (for factory): 2 secs of blue, 2 secs of yellow
	 * Under charging: Orange
	 * Battery low (10%): Orange in breeze mode (1 sec on, 3 sec off)
	 * Battery critical low (less than 3%) or abnormal battery
	 *     situation: Orange in blinking mode (1 sec on, 1 sec off)
	 * Using battery or not connected to AC power: OFF
	 */
	switch (charge_get_state()) {
	case PWR_STATE_CHARGE:
		bat_led_set_color(LED_ORANGE);
		break;
	case PWR_STATE_DISCHARGE:
		if (charge_get_percent() < 3)
			bat_led_set_color((battery_second & 1)
					? LED_OFF : LED_ORANGE);
		else if (charge_get_percent() < 10)
			bat_led_set_color((battery_second & 3)
					? LED_OFF : LED_ORANGE);
		else
			bat_led_set_color(LED_OFF);
		break;
	case PWR_STATE_ERROR:
		bat_led_set_color((battery_second & 1) ? LED_OFF : LED_ORANGE);
		break;
	case PWR_STATE_CHARGE_NEAR_FULL:
		bat_led_set_color(LED_BLUE);
		break;
	case PWR_STATE_IDLE: /* External power connected in IDLE. */
		if (chflags & CHARGE_FLAG_FORCE_IDLE)
			bat_led_set_color(
				(battery_second & 0x2) ? LED_BLUE : LED_ORANGE);
		else
			bat_led_set_color(LED_BLUE);
		break;
	default:
		/* Other states don't alter LED behavior */
		break;
	}
}

コード例 #2

ファイル: led.c プロジェクト: akappy7/ChromeOS_EC_LED_Diagnostics

int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
{
	switch (led_id) {
	case EC_LED_ID_BATTERY_LED:
		if (brightness[EC_LED_COLOR_BLUE] != 0)
			bat_led_set_color(LED_BLUE);
		else if (brightness[EC_LED_COLOR_YELLOW] != 0)
			bat_led_set_color(LED_ORANGE);
		else
			bat_led_set_color(LED_OFF);
		break;
	case EC_LED_ID_POWER_LED:
		if (brightness[EC_LED_COLOR_BLUE] != 0)
			pwr_led_set_color(LED_BLUE);
		else if (brightness[EC_LED_COLOR_YELLOW] != 0)
			pwr_led_set_color(LED_ORANGE);
		else
			pwr_led_set_color(LED_OFF);
		break;
	default:
		return EC_ERROR_UNKNOWN;
	}
	return EC_SUCCESS;
}

コード例 #3

ファイル: led_policy_std.c プロジェクト: fishbaoz/chrome-ec

static void std_led_set_battery(void)
{
	static int battery_second;
	uint32_t chflags = charge_get_flags();

	battery_second++;

	/* BAT LED behavior:
	 * Same as the chromeos spec
	 * Green/Amber for CHARGE_FLAG_FORCE_IDLE
	 */
	switch (charge_get_state()) {
	case PWR_STATE_CHARGE:
		bat_led_set_color(LED_AMBER);
		break;
	case PWR_STATE_DISCHARGE:
		if (charge_get_percent() < 3)
			bat_led_set_color((battery_second & 1)
					? LED_OFF : LED_AMBER);
		else if (charge_get_percent() < 10)
			bat_led_set_color((battery_second & 3)
					? LED_OFF : LED_AMBER);
		else
			bat_led_set_color(LED_OFF);
		break;
	case PWR_STATE_ERROR:
		bat_led_set_color((battery_second & 1) ? LED_OFF : LED_RED);
		break;
	case PWR_STATE_CHARGE_NEAR_FULL:
		bat_led_set_color(LED_GREEN);
		break;
	case PWR_STATE_IDLE: /* External power connected in IDLE. */
		if (chflags & CHARGE_FLAG_FORCE_IDLE)
			bat_led_set_color(
				(battery_second & 0x2) ? LED_GREEN : LED_AMBER);
		else
			bat_led_set_color(LED_GREEN);
		break;
	default:
		/* Other states don't alter LED behavior */
		break;
	}
}

コード例 #4

ファイル: led.c プロジェクト: Basavaraja-MS/ec_local

static int glados_led_set_color_battery(enum led_color color)
{
	return bat_led_set_color(color);
}

コード例 #5

ファイル: led.c プロジェクト: akappy7/ChromeOS_EC_LED_Diagnostics

static int wheatley_led_set_color_battery(enum led_color color)
{
	return bat_led_set_color(color);
}