/**
****************************************************************************************
* @brief Main routineof the DA14580 Peripheral Examples Functions
* DA14580 Peripherals Udage Examples
* - UART
* - SPI Flash
* - Boot From SPI flash
* - EEPROM
* - Timers
* - Battery Level Indication - ADC
* - Quadrature
* - Buzzer
* Due to HW Development Kit limitations, user must select one of the follwoing configuartion for UART, SPI, I2C.
* Addicional Hardware (SPI, EEPROM boadrs) or Hardware modification may needed for some tof the tests.
* More information in the file periph_setup.h, Application Notes, and User Guide for DA14580
* - UART only ( No HW modifications on rev C2 motherboard, No additional hardware)
* - SPI Flash with UART (HW modifications & additional Hardware needed , SPI_DI_PIN on the additional SPI / EEPROM daughterboard )
* - Boot From SPI Flash with UART (HW modifications & additional Hardware needed, (UART TX) )
* - Boot From SPI Flash without UART (Additional Hardware needed)
* - Boot From EEPROM with UART (Additional Hardware needed)
*
****************************************************************************************
*/
int main (void)
{
short int index = 0;
char mchoice;
periph_init();
printf_string("\n\rDA14580 Peripheral Examples\n\r");
printf_string( "---------------------------\n\r");
printf_string("Before running the tests:\n\r");
printf_string(" 1) Make sure you have connected the appropriate peripheral(s).\n\r");
printf_string(" 2) Select the associated hardware configuration in 'periph_setup.h'.\n\r");
printf_string(" 3) Build.\n\r");
printf_string("Please, refer to DA14580 Peripheral Examples User Manual\n\r");
printf_string("for detailed instructions.\n\r");
print_menu();
while(1){
if (index==1) break;
mchoice = uart_receive_byte();
switch (mchoice){
case 'u': uart_test(); endtest_bridge(&index); break;
#ifdef SPI_ENABLED
case 'f': spi_test(); endtest_bridge(&index); break;
#endif //SPI_ENABLED
#ifdef EEPROM_ENABLED
case 'e': i2c_test(); endtest_bridge(&index); break;
#endif //EEPROM_ENABLED
#ifdef QUADEC_ENABLED
case 'q': quad_decoder_test(); endtest_bridge(&index); break;
#endif //QUADEC_ENABLED
#ifdef BUZZER_ENABLED
case 't': timer0_test(); endtest_bridge(&index); break;
case 'p': timer2_test(); endtest_bridge(&index); break;
#endif //BUZZER_ENABLED
case 'b': batt_test(); endtest_bridge(&index); break;
case 'x': index=1;break;
default: print_input(); continue;
};
};
printf_string("\n\r End of tests\n\r");
while(1);
}
/**
****************************************************************************************
* @brief Main routineof the DA14580 Engineering Examples Functions
* DA14580 Peripherals Udage Examples
* - UART
* - SPI Flash
* - Boot From SPI flash
* - EEPROM
* - Timers
* - Battery Level Indication - ADC
* - Quadrature
* - Buzzer
* Due to HW Development Kit limitations, user must select one of the follwoing configuartion for UART, SPI, I2C.
* Addicional Hardware (SPI, EEPROM boadrs) or Hardware modification may needed for some tof the tests.
* More information in the file periph_setup.h, Application Notes, and User Guide for DA14580
* - UART only ( No HW modifications on rev C2 motherboard, No additional hardware)
* - SPI Flash with UART (HW modifications & additional Hardware needed , SPI_DI_PIN on the additional SPI / EEPROM daughterboard )
* - Boot From SPI Flash with UART (HW modifications & additional Hardware needed, (UART TX) )
* - Boot From SPI Flash without UART (Additional Hardware needed)
* - Boot From EEPROM with UART (Additional Hardware needed)
*
****************************************************************************************
*/
int main (void)
{
short int index = 0;
char mchoice;
periph_init();
printf_string("DA14580 Engineering Examples\n\r");
printf_string("Connect the appropriate peripheral before choosing each test\n\r\n\r");
printf_string("Refer to Engineering Examples User Guide\n\r\n\r");
print_menu();
while(1){
if (index==1) break;
mchoice = uart_receive_byte();
switch (mchoice){
case 'u': uart_test(); endtest_bridge(&index); break;
case 'f': spi_test(); endtest_bridge(&index); break;
case 'i': spi_image(); endtest_bridge(&index); break;
case 'e': i2c_test(); endtest_bridge(&index); break;
case 'd': i2c_image(); endtest_bridge(&index); break;
// case 't': swt_test(); endtest_bridge(&index); break;
#ifdef QUADEC_ENABLED
case 'q': quad_decoder_test(); endtest_bridge(&index); break;
#endif //QUADEC_ENABLED
case 't': timer0_test(); endtest_bridge(&index); break;
case 'p': timer2_test(); endtest_bridge(&index); break;
case 'b': batt_test(); endtest_bridge(&index); break;
case 'x': index=1;break;
default: print_input(); continue;
};
};
printf_string("\n\r End of tests\n\r");
while(1);
}
