コード例 #1
0
ファイル: progam.c プロジェクト: Echoskope/KreyosFirmware
int CheckUpgrade(void)
{
  struct _header h;
  // check if the firmware is there
  SPI_FLASH_BufferRead((void*)&h, FIRMWARE_BASE, sizeof(h));

  if (h.signature != SIGNATURE)
    return 0;

  printf("Found firmware, length = %lu\n", h.length);

  SPI_FLASH_BufferRead((void*)&h, FIRMWARE_BASE + h.length + sizeof(h), sizeof(h));

  if (h.signature != SIGNATURE)
    return 1;

  SPI_FLASH_BufferRead((void*)&h, FIRMWARE_BASE + h.length + 2 * sizeof(h), sizeof(h));
  if (h.signature == SIGNATURE)
    return 2; // ignore flag

  if (battery_state() == BATTERY_STATE_DISCHARGING
    && battery_level(BATTERY_STATE_DISCHARGING) < 4)
    return 3; // not enough power

  // check CRC

  return 0xff;
}
コード例 #2
0
/**
 * get_menu_selection()
 *
 */
int get_menu_selection(char** headers, char** items, int menu_only,
                       int initial_selection) {
  // throw away keys pressed previously, so user doesn't
  // accidentally trigger menu items.
  ui_clear_key_queue();

  ui_start_menu(headers, items, initial_selection);
  int selected = initial_selection;
  int chosen_item = -1;

  while (chosen_item < 0) {

#ifdef BOARD_WITH_CPCAP
    int level = battery_level();
    if (level > 0) {
      if ((50 * progress_value) != level / 2) {
          progress_value = level / 100.0;
          if (level < 20)
             ui_print("Low battery ! %3d %%\n", level);
          ui_reset_progress();
          ui_show_progress(progress_value, 1);
          ui_set_progress(1.0);
      }
    }
#endif

    int key = ui_wait_key();
    int visible = ui_text_visible();
    int action = device_handle_key(key, visible);

    if (action < 0) {
        switch (action) {
          case HIGHLIGHT_UP:
            --selected;
            selected = ui_menu_select(selected);
            break;
          case HIGHLIGHT_DOWN:
            ++selected;
            selected = ui_menu_select(selected);
            break;
          case SELECT_ITEM:
            chosen_item = selected;
            break;
          case ACTION_CANCEL:
            chosen_item = GO_BACK;
            break;
          case NO_ACTION:
            break;
        }
    } else if (!menu_only) {
      chosen_item = action;
    }
  }

  ui_end_menu();

  return chosen_item;
}
コード例 #3
0
ファイル: status.c プロジェクト: Sowhat2112/KreyosFirmware
/*
 battery is between 3.7 to 4.2
  4.2 => 2.1 / 2.5 * 255 = 214
  3.7 => 1.86 / 2.5 * 255 = 189
*/
static void check_battery()
{
  //uint8_t report = 0;
  // update battery status
  BATTERY_STATE state = battery_state();
  uint8_t level = battery_level(state);

  status &= ~BATTERY_STATUS;

  switch(level)
  {
    case 0: case 1:
    status |= BATTERY_EMPTY;
    break;
    case 2: case 3:
    status |= BATTERY_LESS;
    break;
    case 4: case 5: case 6:
    status |= BATTERY_MORE;
    break;
    default:
    status |= BATTERY_FULL;
  }

  if (window_current() != &charging_process)
  {
    if ((level == 0) && (state == BATTERY_STATE_DISCHARGING))
    {
      window_open(&charging_process, 0);
    }
  }

#ifndef UNITTEST
  if (window_current() == &menu_process ||
    window_current() == &analogclock_process ||
    window_current() == &digitclock_process)
  {
    if (state != BATTERY_STATE_DISCHARGING)
    {
      window_open(&charging_process, 0); 
    }
  }
#endif

  if (state == BATTERY_STATE_CHARGING)
  {
    status |= BATTERY_CHARGING;
    level |= 0x10;
  }

  hfp_battery(level);
}
コード例 #4
0
void gui_statusbar_draw(struct gui_statusbar * bar, bool force_redraw, struct viewport *vp)
{
    struct screen * display = bar->display;

    if (!display)
        return;

#ifdef HAVE_LCD_CHARCELLS
    int val;
    (void)force_redraw; /* The Player always has "redraw" */
    (void)vp;
#endif /* HAVE_LCD_CHARCELLS */

    bar->info.battlevel = battery_level();
#ifdef HAVE_USB_POWER
    bar->info.usb_inserted = usb_inserted();
#endif
#if CONFIG_CHARGING
    bar->info.inserted = (charger_input_state == CHARGER);
    if (bar->info.inserted)
    {
        bar->info.battery_state = true;

#if CONFIG_CHARGING >= CHARGING_MONITOR

        /* zero battery run time if charging */
        if (charge_state > DISCHARGING)
            lasttime = current_tick;

        /* animate battery if charging */
        if ((charge_state == DISCHARGING) || (charge_state == TRICKLE))
        {
            bar->info.batt_charge_step = -1;
        }
        else
        {
#else /* CONFIG_CHARGING < CHARGING_MONITOR */
        lasttime = current_tick;
        {
#endif /* CONFIG_CHARGING < CHARGING_MONITOR */
            /* animate in (max.) 4 steps, starting near the current charge level */
            if (TIME_AFTER(current_tick, bar->battery_icon_switch_tick)) 
            {
                if (++bar->info.batt_charge_step > 3)
                    bar->info.batt_charge_step = bar->info.battlevel / 34;
                bar->battery_icon_switch_tick = current_tick + HZ;
            }
        }
    }
    else
#endif /* CONFIG_CHARGING */
    {
コード例 #5
0
static void charging_screen(void)
{
    unsigned int button;
    const char* msg;

    ide_power_enable(false); /* power down the disk, else would be spinning */

    lcd_clear_display();

    do
    {
#ifdef ARCHOS_RECORDER
        if (charge_state == CHARGING)
            msg = "charging";
        else if (charge_state == TOPOFF)
            msg = "topoff charge";
        else if (charge_state == TRICKLE)
            msg = "trickle charge";
        else
            msg = "not charging";
#else
        msg = "charging";
#endif
        lcd_puts(0, 0, msg);
        {
            char buf[32];
            int battv = battery_voltage();
            snprintf(buf, sizeof(buf), "%d.%02dV %d%%",
                battv / 1000, (battv % 1000) / 10, battery_level());
            lcd_puts(0, 1, buf);
        }
        lcd_update();

        button = button_get_w_tmo(HZ/2);
#ifdef BUTTON_ON
        if (button == (BUTTON_ON | BUTTON_REL))
#else
        if (button == (BUTTON_RIGHT | BUTTON_REL))
#endif
            break; /* start */
        else
        {
            if (usb_detect() == USB_INSERTED)
                break;
            else if (!charger_inserted())
                power_off(); /* charger removed: power down */
        }
    } while (1);
}
コード例 #6
0
ファイル: screens.c プロジェクト: sideral-rockbox/rockbox
static void charging_display_info(bool animate)
{
    unsigned char charging_logo[36];
    const int pox_x = (LCD_WIDTH - sizeof(charging_logo)) / 2;
    const int pox_y = 32;
    static unsigned phase = 3;
    unsigned i;

#ifdef NEED_ATA_POWER_BATT_MEASURE
    if (ide_powered()) /* FM and V2 can only measure when ATA power is on */
#endif
    {
        int battv = battery_voltage();
        lcd_putsf(0, 7, "  Batt: %d.%02dV %d%%  ", battv / 1000,
                 (battv % 1000) / 10, battery_level());
    }

#ifdef ARCHOS_RECORDER
    lcd_puts(0, 2, "Charge mode:");

    const char *s;
    if (charge_state == CHARGING)
        s = str(LANG_BATTERY_CHARGE);
    else if (charge_state == TOPOFF)
        s = str(LANG_BATTERY_TOPOFF_CHARGE);
    else if (charge_state == TRICKLE)
        s = str(LANG_BATTERY_TRICKLE_CHARGE);
    else
        s = "not charging";

    lcd_puts(0, 3, s);
    if (!charger_enabled())
        animate = false;
#endif /* ARCHOS_RECORDER */

    /* middle part */
    memset(charging_logo+3, 0x00, 32);
    charging_logo[0] = 0x3C;
    charging_logo[1] = 0x24;
    charging_logo[2] = charging_logo[35] = 0xFF;

    if (!animate)
    {   /* draw the outline */
        /* middle part */
        lcd_mono_bitmap(charging_logo, pox_x, pox_y + 8,
                        sizeof(charging_logo), 8);
        lcd_set_drawmode(DRMODE_FG);
        /* upper line */
        charging_logo[0] = charging_logo[1] = 0x00;
        memset(charging_logo+2, 0x80, 34);
        lcd_mono_bitmap(charging_logo, pox_x, pox_y, sizeof(charging_logo), 8);
        /* lower line */
        memset(charging_logo+2, 0x01, 34);
        lcd_mono_bitmap(charging_logo, pox_x, pox_y + 16,
                        sizeof(charging_logo), 8);
        lcd_set_drawmode(DRMODE_SOLID);
    }
    else
    {   /* animate the middle part */
        for (i = 3; i<MIN(sizeof(charging_logo)-1, phase); i++)
        {
            if ((i-phase) % 8 == 0)
            {   /* draw a "bubble" here */
                unsigned bitpos;
                bitpos = (phase + i/8) % 15; /* "bounce" effect */
                if (bitpos > 7)
                    bitpos = 14 - bitpos;
                charging_logo[i] = BIT_N(bitpos);
            }
        }
        lcd_mono_bitmap(charging_logo, pox_x, pox_y + 8,
                        sizeof(charging_logo), 8);
        phase++;
    }
    lcd_update();
}
コード例 #7
0
ファイル: skin_display.c プロジェクト: lyzkov/rockbox
void draw_progressbar(struct gui_wps *gwps, int line, struct progressbar *pb)
{
    struct screen *display = gwps->display;
    struct viewport *vp = pb->vp;
    struct wps_state *state = skin_get_global_state();
    struct mp3entry *id3 = state->id3;
    int x = pb->x, y = pb->y, width = pb->width, height = pb->height;
    unsigned long length, end;
    int flags = HORIZONTAL;
    
    if (height < 0)
        height = font_get(vp->font)->height;

    if (y < 0)
    {
        int line_height = font_get(vp->font)->height;
        /* center the pb in the line, but only if the line is higher than the pb */
        int center = (line_height-height)/2;
        /* if Y was not set calculate by font height,Y is -line_number-1 */
        y = line*line_height + (0 > center ? 0 : center);
    }

    if (pb->type == SKIN_TOKEN_VOLUMEBAR)
    {
        int minvol = sound_min(SOUND_VOLUME);
        int maxvol = sound_max(SOUND_VOLUME);
        length = maxvol-minvol;
        end = global_settings.volume-minvol;
    }
    else if (pb->type == SKIN_TOKEN_BATTERY_PERCENTBAR)
    {
        length = 100;
        end = battery_level();
    }
    else if (pb->type == SKIN_TOKEN_PEAKMETER_LEFTBAR ||
             pb->type == SKIN_TOKEN_PEAKMETER_RIGHTBAR)
    {
        int left, right, val;
        peak_meter_current_vals(&left, &right);
        val = pb->type == SKIN_TOKEN_PEAKMETER_LEFTBAR ? left : right;
        length = MAX_PEAK;
        end = peak_meter_scale_value(val, length);
    }
#if CONFIG_TUNER
    else if (in_radio_screen() || (get_radio_status() != FMRADIO_OFF))
    {
#ifdef HAVE_RADIO_RSSI
        if (pb->type == SKIN_TOKEN_TUNER_RSSI_BAR)
        {
            int val = tuner_get(RADIO_RSSI);
            int min = tuner_get(RADIO_RSSI_MIN);
            int max = tuner_get(RADIO_RSSI_MAX);
            end = val - min;
            length = max - min;
        }
        else
#endif
        {
            int min = fm_region_data[global_settings.fm_region].freq_min;
            end = radio_current_frequency() - min;
            length = fm_region_data[global_settings.fm_region].freq_max - min;
        }
    }
#endif
    else if (id3 && id3->length)
    {
        length = id3->length;
        end = id3->elapsed + state->ff_rewind_count;
    }
    else
    {
        length = 1;
        end = 0;
    }
    
    if (!pb->horizontal)
    {
        /* we want to fill upwards which is technically inverted. */
        flags = INVERTFILL;
    }
    
    if (pb->invert_fill_direction)
    {
        flags ^= INVERTFILL;
    }

    if (pb->nofill)
    {
        flags |= INNER_NOFILL;
    }

    if (pb->slider)
    {
        struct gui_img *img = pb->slider;
        /* clear the slider */
        screen_clear_area(display, x, y, width, height);

        /* shrink the bar so the slider is inside bounds */
        if (flags&HORIZONTAL)
        {
            width -= img->bm.width;
            x += img->bm.width / 2;
        }
        else
        {
            height -= img->bm.height;
            y += img->bm.height / 2;
        }
    }
    
    if (pb->backdrop)
    {
        struct gui_img *img = pb->backdrop;
#if LCD_DEPTH > 1
        if(img->bm.format == FORMAT_MONO) {
#endif
            display->mono_bitmap_part(img->bm.data,
                                      0, 0, img->bm.width,
                                      x, y, width, height);
#if LCD_DEPTH > 1
        } else {
            display->transparent_bitmap_part((fb_data *)img->bm.data,
                                             0, 0,
                                             STRIDE(display->screen_type,
                                             img->bm.width, img->bm.height),
                                             x, y, width, height);
        }
#endif
        flags |= DONT_CLEAR_EXCESS;
    }
    
    if (!pb->nobar)
    {
        if (pb->image)
            gui_bitmap_scrollbar_draw(display, &pb->image->bm,
                                    x, y, width, height,
                                    length, 0, end, flags);
        else
            gui_scrollbar_draw(display, x, y, width, height,
                               length, 0, end, flags);
    }

    if (pb->slider)
    {
        int xoff = 0, yoff = 0;
        int w = width, h = height;
        struct gui_img *img = pb->slider;

        if (flags&HORIZONTAL)
        {
            w = img->bm.width;
            xoff = width * end / length;
            if (flags&INVERTFILL)
                xoff = width - xoff;
            xoff -= w / 2;
        }
        else
        {
            h = img->bm.height;
            yoff = height * end / length;
            if (flags&INVERTFILL)
                yoff = height - yoff;
            yoff -= h / 2;
        }
#if LCD_DEPTH > 1
        if(img->bm.format == FORMAT_MONO) {
#endif
            display->mono_bitmap_part(img->bm.data,
                                      0, 0, img->bm.width,
                                      x + xoff, y + yoff, w, h);
#if LCD_DEPTH > 1
        } else {
            display->transparent_bitmap_part((fb_data *)img->bm.data,
                                             0, 0,
                                             STRIDE(display->screen_type,
                                             img->bm.width, img->bm.height),
                                             x + xoff, y + yoff, w, h);
        }
#endif
    }

    if (pb->type == SKIN_TOKEN_PROGRESSBAR)
    {
        if (id3 && id3->length)
        {
#ifdef AB_REPEAT_ENABLE
            if (ab_repeat_mode_enabled())
                ab_draw_markers(display, id3->length, x, y, width, height);
#endif

            if (id3->cuesheet)
                cue_draw_markers(display, id3->cuesheet, id3->length,
                                 x, y+1, width, height-2);
        }
#if 0 /* disable for now CONFIG_TUNER */
        else if (in_radio_screen() || (get_radio_status() != FMRADIO_OFF))
        {
            presets_draw_markers(display, x, y, width, height);
        }
#endif
    }
}
コード例 #8
0
ファイル: lcd-remote-mr500.c プロジェクト: RichJames/rockbox
/* Monitor remote hotswap */
static void remote_tick(void)
{
    unsigned char i;
    int bat_level;
    static unsigned char pause_length=0;
    
    if(remote_state_control!=REMOTE_CONTROL_DRAW && remote_state_control!=REMOTE_CONTROL_IDLE) {
        remote_state_control=remote_state_control_next;
        remote_state_control_next=REMOTE_CONTROL_MASK;
    }
    
    switch (remote_state_control)
    {
        case REMOTE_CONTROL_IDLE:
            /* State machine never leaves idle unless remote_state_control is
             * manually set.
             */
            remote_payload_size=0;
            remote_state_control=REMOTE_CONTROL_IDLE;
            break;
            
        case REMOTE_CONTROL_NOP:
            remote_payload[0]=0x11;
            remote_payload[1]=0x30;
            
            remote_payload_size=2;
            remote_state_control=REMOTE_CONTROL_MASK;
            break;
            
        case REMOTE_CONTROL_POWER:
            remote_payload[0]=0x31;
            remote_payload[1]=remote_power;
            remote_payload[2]=remote_contrast;
            
            remote_payload_size=3;
            remote_state_control=REMOTE_CONTROL_MASK;
            break;
            
        case REMOTE_CONTROL_MASK:
            bat_level=battery_level()>>5;
            remote_payload[1]=0;
            
            if(bat_level&0x02) {
                remote_payload[1] |= 0x07 << 5;
            } else if(bat_level&0x01) {
                remote_payload[1] |= 0x03 << 5;
            } else {
                remote_payload[1] |= 0x01 << 5;
            }
            remote_payload[1]|=1<<4;
            
            remote_payload[0]=0x41;
            
            remote_payload_size=2;
            remote_state_control=REMOTE_CONTROL_MASK;
            break;
            
        case REMOTE_CONTROL_DRAW:
            remote_payload[0]=0x51;
            remote_payload[1]=0x80;
            remote_payload[2]=remote_draw_width;
            remote_payload[3]=remote_draw_x;
            
            remote_payload[5]=remote_draw_x+remote_draw_width;
            remote_payload_size=7+remote_payload[2];
            
            switch (remote_state_draw)
            {
                case DRAW_TOP:
                    remote_payload[4]=0;
                    remote_payload[6]=8;
                    
                    pause_length=6;
                    remote_state_draw_next=DRAW_BOTTOM;
                    remote_state_draw=DRAW_PAUSE;
                    break;
                    
                case DRAW_BOTTOM:
                    remote_payload[4]=8;
                    remote_payload[6]=16;
                    
                    pause_length=6;
                    remote_state_draw_next=DRAW_TOP;
                    remote_state_draw=DRAW_PAUSE;
                    break;
                    
                case DRAW_PAUSE:
                    remote_payload_size=0;
                    
                    if(--pause_length==0)
                    {
                        if(remote_state_draw_next==DRAW_TOP)
                            remote_state_control=REMOTE_CONTROL_MASK;
                            
                        remote_state_draw=remote_state_draw_next;
                    }
                    else
                        remote_state_draw=DRAW_PAUSE;

                    break;
                    
                default:
                    remote_payload_size=0;
                    break;
            }
            break;
            
        case REMOTE_CONTROL_SLEEP:
            remote_payload[0]=0x71;
            remote_payload[1]=0x30;

            remote_payload_size=2;
            remote_state_control=REMOTE_CONTROL_IDLE;
            break;
            
        default:
            remote_payload_size=0;
            break;
    }
    
    if(remote_payload_size==0)
    {
        return;
    }
    
    if(remote_payload[0]==0x51)
    {
        for(i=7; i<remote_payload_size; i++)
        {
            remote_payload[i]=
                *FBREMOTEADDR(i+remote_draw_x-7, remote_payload[4]>>3);
        }
    }
    
    /* Calculate the xor and sum to place in the payload */
    remote_payload[remote_payload_size]=remote_payload[0];
    remote_payload[remote_payload_size+1]=remote_payload[0];
    for(i=1; i<remote_payload_size; i++)
    {
        remote_payload[remote_payload_size]^=remote_payload[i];
        remote_payload[remote_payload_size+1]+=remote_payload[i];
    }

    uart1_puts(remote_payload, remote_payload_size+2);
}
コード例 #9
0
ファイル: misc.c プロジェクト: BurntBrunch/rockbox-fft
static bool clean_shutdown(void (*callback)(void *), void *parameter)
{
#ifdef SIMULATOR
    (void)callback;
    (void)parameter;
    bookmark_autobookmark();
    call_storage_idle_notifys(true);
    exit(0);
#else
    long msg_id = -1;
    int i;

    scrobbler_poweroff();

#if CONFIG_CHARGING && !defined(HAVE_POWEROFF_WHILE_CHARGING)
    if(!charger_inserted())
#endif
    {
        bool batt_safe = battery_level_safe();
        int audio_stat = audio_status();

        FOR_NB_SCREENS(i)
        {
            screens[i].clear_display();
            screens[i].update();
        }

        if (batt_safe)
        {
#ifdef HAVE_TAGCACHE
            if (!tagcache_prepare_shutdown())
            {
                cancel_shutdown();
                splash(HZ, ID2P(LANG_TAGCACHE_BUSY));
                return false;
            }
#endif
            if (battery_level() > 10)
                splash(0, str(LANG_SHUTTINGDOWN));
            else
            {
                msg_id = LANG_WARNING_BATTERY_LOW;
                splashf(0, "%s %s", str(LANG_WARNING_BATTERY_LOW),
                                    str(LANG_SHUTTINGDOWN));
            }
        }
        else
        {
            msg_id = LANG_WARNING_BATTERY_EMPTY;
            splashf(0, "%s %s", str(LANG_WARNING_BATTERY_EMPTY),
                                str(LANG_SHUTTINGDOWN));
        }

        if (global_settings.fade_on_stop
            && (audio_stat & AUDIO_STATUS_PLAY))
        {
            fade(false, false);
        }

        if (batt_safe) /* do not save on critical battery */
        {
#if defined(HAVE_RECORDING) && CONFIG_CODEC == SWCODEC
            if (audio_stat & AUDIO_STATUS_RECORD)
            {
                rec_command(RECORDING_CMD_STOP);
                /* wait for stop to complete */
                while (audio_status() & AUDIO_STATUS_RECORD)
                    sleep(1);
            }
#endif
            bookmark_autobookmark();

            /* audio_stop_recording == audio_stop for HWCODEC */
            audio_stop();

            if (callback != NULL)
                callback(parameter);

#if CONFIG_CODEC != SWCODEC
            /* wait for audio_stop or audio_stop_recording to complete */
            while (audio_status())
                sleep(1);
#endif

#if defined(HAVE_RECORDING) && CONFIG_CODEC == SWCODEC
            audio_close_recording();
#endif

            if(global_settings.talk_menu)
            {
                bool enqueue = false;
                if(msg_id != -1)
                {
                    talk_id(msg_id, enqueue);
                    enqueue = true;
                }
                talk_id(LANG_SHUTTINGDOWN, enqueue);
#if CONFIG_CODEC == SWCODEC
                voice_wait();
#endif
            }

            system_flush();
#ifdef HAVE_EEPROM_SETTINGS
            if (firmware_settings.initialized)
            {
                firmware_settings.disk_clean = true;
                firmware_settings.bl_version = 0;
                eeprom_settings_store();
            }
#endif
        }
#ifdef HAVE_DIRCACHE
        else
            dircache_disable();
#endif

        shutdown_hw();
    }
コード例 #10
0
ファイル: skin_display.c プロジェクト: 4nykey/rockbox
void draw_progressbar(struct gui_wps *gwps, int line, struct progressbar *pb)
{
    struct screen *display = gwps->display;
    struct viewport *vp = SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->vp);
    struct wps_state *state = skin_get_global_state();
    struct mp3entry *id3 = state->id3;
    int x = pb->x, y = pb->y, width = pb->width, height = pb->height;
    unsigned long length, end;
    int flags = HORIZONTAL;
    
    if (height < 0)
        height = font_get(vp->font)->height;

    if (y < 0)
    {
        int line_height = font_get(vp->font)->height;
        /* center the pb in the line, but only if the line is higher than the pb */
        int center = (line_height-height)/2;
        /* if Y was not set calculate by font height,Y is -line_number-1 */
        y = line*line_height + (0 > center ? 0 : center);
    }

    if (pb->type == SKIN_TOKEN_VOLUMEBAR)
    {
        int minvol = sound_min(SOUND_VOLUME);
        int maxvol = sound_max(SOUND_VOLUME);
        length = maxvol-minvol;
        end = global_settings.volume-minvol;
    }
    else if (pb->type == SKIN_TOKEN_BATTERY_PERCENTBAR)
    {
        length = 100;
        end = battery_level();
    }
    else if (pb->type == SKIN_TOKEN_PEAKMETER_LEFTBAR ||
             pb->type == SKIN_TOKEN_PEAKMETER_RIGHTBAR)
    {
        int left, right, val;
        peak_meter_current_vals(&left, &right);
        val = pb->type == SKIN_TOKEN_PEAKMETER_LEFTBAR ? left : right;
        length = MAX_PEAK;
        end = peak_meter_scale_value(val, length);
    }
    else if (pb->type == SKIN_TOKEN_LIST_SCROLLBAR)
    {
        int val, min, max;
        skinlist_get_scrollbar(&val, &min, &max);
        end = val - min;
        length = max - min;
    }
    else if (pb->type == SKIN_TOKEN_SETTINGBAR)
    {
        int val, count;
        get_setting_info_for_bar(pb->setting_id, &count, &val);
        length = count - 1;
        end = val;
    }
#if CONFIG_TUNER
    else if (in_radio_screen() || (get_radio_status() != FMRADIO_OFF))
    {
#ifdef HAVE_RADIO_RSSI
        if (pb->type == SKIN_TOKEN_TUNER_RSSI_BAR)
        {
            int val = tuner_get(RADIO_RSSI);
            int min = tuner_get(RADIO_RSSI_MIN);
            int max = tuner_get(RADIO_RSSI_MAX);
            end = val - min;
            length = max - min;
        }
        else
#endif
        {
            int min = fm_region_data[global_settings.fm_region].freq_min;
            end = radio_current_frequency() - min;
            length = fm_region_data[global_settings.fm_region].freq_max - min;
        }
    }
#endif
    else if (id3 && id3->length)
    {
        length = id3->length;
        end = id3->elapsed + state->ff_rewind_count;
    }
    else
    {
        length = 1;
        end = 0;
    }
    
    if (!pb->horizontal)
    {
        /* we want to fill upwards which is technically inverted. */
        flags = INVERTFILL;
    }
    
    if (pb->invert_fill_direction)
    {
        flags ^= INVERTFILL;
    }

    if (pb->nofill)
    {
        flags |= INNER_NOFILL;
    }

    if (SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->slider))
    {
        struct gui_img *img = SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->slider);
        /* clear the slider */
        screen_clear_area(display, x, y, width, height);

        /* account for the sliders width in the progressbar */
        if (flags&HORIZONTAL)
        {
            width -= img->bm.width;
        }
        else
        {
            height -= img->bm.height;
        }
    }

    if (SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->backdrop))
    {
        struct gui_img *img = SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->backdrop);
        img->bm.data = core_get_data(img->buflib_handle);
        display->bmp_part(&img->bm, 0, 0, x, y, pb->width, height);
        flags |= DONT_CLEAR_EXCESS;
    }

    if (!pb->nobar)
    {
        struct gui_img *img = SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->image);
        if (img)
        {
            char *img_data = core_get_data(img->buflib_handle);
            img->bm.data = img_data;
            gui_bitmap_scrollbar_draw(display, &img->bm,
                                    x, y, width, height,
                                    length, 0, end, flags);
        }
        else
            gui_scrollbar_draw(display, x, y, width, height,
                               length, 0, end, flags);
    }

    if (SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->slider))
    {
        int xoff = 0, yoff = 0;
        int w = width, h = height;
        struct gui_img *img = SKINOFFSETTOPTR(get_skin_buffer(gwps->data), pb->slider);
        img->bm.data = core_get_data(img->buflib_handle);

        if (flags&HORIZONTAL)
        {
            w = img->bm.width;
            xoff = width * end / length;
            if (flags&INVERTFILL)
                xoff = width - xoff;
        }
        else
        {
            h = img->bm.height;
            yoff = height * end / length;
            if (flags&INVERTFILL)
                yoff = height - yoff;
        }
        display->bmp_part(&img->bm, 0, 0, x + xoff, y + yoff, w, h);
    }

    if (pb->type == SKIN_TOKEN_PROGRESSBAR)
    {
        if (id3 && id3->length)
        {
#ifdef AB_REPEAT_ENABLE
            if (ab_repeat_mode_enabled())
                ab_draw_markers(display, id3->length, x, y, width, height);
#endif

            if (id3->cuesheet)
                cue_draw_markers(display, id3->cuesheet, id3->length,
                                 x, y+1, width, height-2);
        }
#if 0 /* disable for now CONFIG_TUNER */
        else if (in_radio_screen() || (get_radio_status() != FMRADIO_OFF))
        {
            presets_draw_markers(display, x, y, width, height);
        }
#endif
    }
}