/*******************************************************************************
* This function programs EL3 registers and performs other setup to enable entry
* into the next image after BL31 at the next ERET.
******************************************************************************/
void bl31_prepare_next_image_entry()
{
el_change_info_t *next_image_info;
uint32_t scr, image_type;
/* Determine which image to execute next */
image_type = bl31_get_next_image_type();
/*
* Setup minimal architectural state of the next highest EL to
* allow execution in it immediately upon entering it.
*/
bl31_next_el_arch_setup(image_type);
/* Program EL3 registers to enable entry into the next EL */
next_image_info = bl31_get_next_image_info(image_type);
assert(next_image_info);
scr = read_scr();
if (image_type == NON_SECURE)
scr |= SCR_NS_BIT;
/*
* Tell the context mgmt. library to ensure that SP_EL3 points to
* the right context to exit from EL3 correctly.
*/
cm_set_el3_eret_context(next_image_info->security_state,
next_image_info->entrypoint,
next_image_info->spsr,
scr);
/* Finally set the next context */
cm_set_next_eret_context(next_image_info->security_state);
}
/*******************************************************************************
* This function programs EL3 registers and performs other setup to enable entry
* into the next image after BL31 at the next ERET.
******************************************************************************/
void bl31_prepare_next_image_entry(void)
{
entry_point_info_t *next_image_info;
uint32_t image_type;
/* Determine which image to execute next */
image_type = bl31_get_next_image_type();
/* Program EL3 registers to enable entry into the next EL */
next_image_info = bl31_plat_get_next_image_ep_info(image_type);
assert(next_image_info);
assert(image_type == GET_SECURITY_STATE(next_image_info->h.attr));
INFO("BL3-1: Preparing for EL3 exit to %s world\n",
(image_type == SECURE) ? "secure" : "normal");
INFO("BL3-1: Next image address = 0x%llx\n",
(unsigned long long) next_image_info->pc);
INFO("BL3-1: Next image spsr = 0x%x\n", next_image_info->spsr);
cm_init_context(read_mpidr_el1(), next_image_info);
cm_prepare_el3_exit(image_type);
}
/*******************************************************************************
* This function programs EL3 registers and performs other setup to enable entry
* into the next image after BL31 at the next ERET.
******************************************************************************/
void bl31_prepare_next_image_entry()
{
entry_point_info_t *next_image_info;
uint32_t scr, image_type;
cpu_context_t *ctx;
gp_regs_t *gp_regs;
/* Determine which image to execute next */
image_type = bl31_get_next_image_type();
/*
* Setup minimal architectural state of the next highest EL to
* allow execution in it immediately upon entering it.
*/
bl31_next_el_arch_setup(image_type);
/* Program EL3 registers to enable entry into the next EL */
next_image_info = bl31_plat_get_next_image_ep_info(image_type);
assert(next_image_info);
assert(image_type == GET_SECURITY_STATE(next_image_info->h.attr));
scr = read_scr();
scr &= ~SCR_NS_BIT;
if (image_type == NON_SECURE)
scr |= SCR_NS_BIT;
scr &= ~SCR_RW_BIT;
if ((next_image_info->spsr & (1 << MODE_RW_SHIFT)) ==
(MODE_RW_64 << MODE_RW_SHIFT))
{
scr |= SCR_RW_BIT;
scr |= SCR_HCE_BIT;
}
else
{
scr &= ~(SCR_HCE_BIT);
}
/*
* FIXME: Need a configurable flag when we have hypervisor installed
* This is for PSCI CPU_UP api to work correctly
* PSCI uses scr.hce to determine the target CPU of CPU_UP
* returns to NS world with HYP mode(HCE is set) or SVC mode(HCE is not set)
* (refer to psci_set_ns_entry_info() in psci_common.c)
* since we don't have hypervisor installed for now, we need to
* enter linux with SVC mode.
*/
// FIXME: For 64bit kernel, we need return to normal world with EL2
// Temporary comment out this to enable 64bit kernel smp.
// Need a method to configure this for 32bit/64bit kernel
//scr &= ~(SCR_HCE_BIT);
/*
* Tell the context mgmt. library to ensure that SP_EL3 points to
* the right context to exit from EL3 correctly.
*/
cm_set_el3_eret_context(image_type,
next_image_info->pc,
next_image_info->spsr,
scr);
/*
* Save the args generated in BL2 for the image in the right context
* used on its entry
*/
ctx = cm_get_context(read_mpidr(), image_type);
gp_regs = get_gpregs_ctx(ctx);
memcpy(gp_regs, (void *)&next_image_info->args, sizeof(aapcs64_params_t));
/* Finally set the next context */
cm_set_next_eret_context(image_type);
}
