コード例 #1
0
ファイル: blk-zoned.c プロジェクト: austriancoder/linux
/*
 * BLKRESETZONE ioctl processing.
 * Called from blkdev_ioctl.
 */
int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode,
			     unsigned int cmd, unsigned long arg)
{
	void __user *argp = (void __user *)arg;
	struct request_queue *q;
	struct blk_zone_range zrange;

	if (!argp)
		return -EINVAL;

	q = bdev_get_queue(bdev);
	if (!q)
		return -ENXIO;

	if (!blk_queue_is_zoned(q))
		return -ENOTTY;

	if (!capable(CAP_SYS_ADMIN))
		return -EACCES;

	if (!(mode & FMODE_WRITE))
		return -EBADF;

	if (copy_from_user(&zrange, argp, sizeof(struct blk_zone_range)))
		return -EFAULT;

	return blkdev_reset_zones(bdev, zrange.sector, zrange.nr_sectors,
				  GFP_KERNEL);
}
コード例 #2
0
ファイル: blk-zoned.c プロジェクト: austriancoder/linux
/**
 * blkdev_nr_zones - Get number of zones
 * @bdev:	Target block device
 *
 * Description:
 *    Return the total number of zones of a zoned block device.
 *    For a regular block device, the number of zones is always 0.
 */
unsigned int blkdev_nr_zones(struct block_device *bdev)
{
	struct request_queue *q = bdev_get_queue(bdev);

	if (!blk_queue_is_zoned(q))
		return 0;

	return __blkdev_nr_zones(q, bdev->bd_part->nr_sects);
}
コード例 #3
0
ファイル: blk-zoned.c プロジェクト: austriancoder/linux
/*
 * BLKREPORTZONE ioctl processing.
 * Called from blkdev_ioctl.
 */
int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode,
			      unsigned int cmd, unsigned long arg)
{
	void __user *argp = (void __user *)arg;
	struct request_queue *q;
	struct blk_zone_report rep;
	struct blk_zone *zones;
	int ret;

	if (!argp)
		return -EINVAL;

	q = bdev_get_queue(bdev);
	if (!q)
		return -ENXIO;

	if (!blk_queue_is_zoned(q))
		return -ENOTTY;

	if (!capable(CAP_SYS_ADMIN))
		return -EACCES;

	if (copy_from_user(&rep, argp, sizeof(struct blk_zone_report)))
		return -EFAULT;

	if (!rep.nr_zones)
		return -EINVAL;

	rep.nr_zones = min(blkdev_nr_zones(bdev), rep.nr_zones);

	zones = kvmalloc_array(rep.nr_zones, sizeof(struct blk_zone),
			       GFP_KERNEL | __GFP_ZERO);
	if (!zones)
		return -ENOMEM;

	ret = blkdev_report_zones(bdev, rep.sector,
				  zones, &rep.nr_zones,
				  GFP_KERNEL);
	if (ret)
		goto out;

	if (copy_to_user(argp, &rep, sizeof(struct blk_zone_report))) {
		ret = -EFAULT;
		goto out;
	}

	if (rep.nr_zones) {
		if (copy_to_user(argp + sizeof(struct blk_zone_report), zones,
				 sizeof(struct blk_zone) * rep.nr_zones))
			ret = -EFAULT;
	}

 out:
	kvfree(zones);

	return ret;
}
コード例 #4
0
ファイル: blk-zoned.c プロジェクト: austriancoder/linux
/**
 * blkdev_reset_zones - Reset zones write pointer
 * @bdev:	Target block device
 * @sector:	Start sector of the first zone to reset
 * @nr_sectors:	Number of sectors, at least the length of one zone
 * @gfp_mask:	Memory allocation flags (for bio_alloc)
 *
 * Description:
 *    Reset the write pointer of the zones contained in the range
 *    @sector..@sector+@nr_sectors. Specifying the entire disk sector range
 *    is valid, but the specified range should not contain conventional zones.
 */
int blkdev_reset_zones(struct block_device *bdev,
		       sector_t sector, sector_t nr_sectors,
		       gfp_t gfp_mask)
{
	struct request_queue *q = bdev_get_queue(bdev);
	sector_t zone_sectors;
	sector_t end_sector = sector + nr_sectors;
	struct bio *bio = NULL;
	struct blk_plug plug;
	int ret;

	if (!blk_queue_is_zoned(q))
		return -EOPNOTSUPP;

	if (bdev_read_only(bdev))
		return -EPERM;

	if (!nr_sectors || end_sector > bdev->bd_part->nr_sects)
		/* Out of range */
		return -EINVAL;

	/* Check alignment (handle eventual smaller last zone) */
	zone_sectors = blk_queue_zone_sectors(q);
	if (sector & (zone_sectors - 1))
		return -EINVAL;

	if ((nr_sectors & (zone_sectors - 1)) &&
	    end_sector != bdev->bd_part->nr_sects)
		return -EINVAL;

	blk_start_plug(&plug);
	while (sector < end_sector) {

		bio = blk_next_bio(bio, 0, gfp_mask);
		bio->bi_iter.bi_sector = sector;
		bio_set_dev(bio, bdev);
		bio_set_op_attrs(bio, REQ_OP_ZONE_RESET, 0);

		sector += zone_sectors;

		/* This may take a while, so be nice to others */
		cond_resched();

	}

	ret = submit_bio_wait(bio);
	bio_put(bio);

	blk_finish_plug(&plug);

	return ret;
}
コード例 #5
0
/**
 * blkdev_reset_zones - Reset zones write pointer
 * @bdev:	Target block device
 * @sector:	Start sector of the first zone to reset
 * @nr_sectors:	Number of sectors, at least the length of one zone
 * @gfp_mask:	Memory allocation flags (for bio_alloc)
 *
 * Description:
 *    Reset the write pointer of the zones contained in the range
 *    @sector..@sector+@nr_sectors. Specifying the entire disk sector range
 *    is valid, but the specified range should not contain conventional zones.
 */
int blkdev_reset_zones(struct block_device *bdev,
		       sector_t sector, sector_t nr_sectors,
		       gfp_t gfp_mask)
{
	struct request_queue *q = bdev_get_queue(bdev);
	sector_t zone_sectors;
	sector_t end_sector = sector + nr_sectors;
	struct bio *bio;
	int ret;

	if (!q)
		return -ENXIO;

	if (!blk_queue_is_zoned(q))
		return -EOPNOTSUPP;

	if (end_sector > bdev->bd_part->nr_sects)
		/* Out of range */
		return -EINVAL;

	/* Check alignment (handle eventual smaller last zone) */
	zone_sectors = blk_queue_zone_size(q);
	if (sector & (zone_sectors - 1))
		return -EINVAL;

	if ((nr_sectors & (zone_sectors - 1)) &&
	    end_sector != bdev->bd_part->nr_sects)
		return -EINVAL;

	while (sector < end_sector) {

		bio = bio_alloc(gfp_mask, 0);
		bio->bi_iter.bi_sector = sector;
		bio->bi_bdev = bdev;
		bio_set_op_attrs(bio, REQ_OP_ZONE_RESET, 0);

		ret = submit_bio_wait(bio);
		bio_put(bio);

		if (ret)
			return ret;

		sector += zone_sectors;

		/* This may take a while, so be nice to others */
		cond_resched();

	}

	return 0;
}
コード例 #6
0
ファイル: blk-zoned.c プロジェクト: austriancoder/linux
/**
 * blkdev_report_zones - Get zones information
 * @bdev:	Target block device
 * @sector:	Sector from which to report zones
 * @zones:	Array of zone structures where to return the zones information
 * @nr_zones:	Number of zone structures in the zone array
 * @gfp_mask:	Memory allocation flags (for bio_alloc)
 *
 * Description:
 *    Get zone information starting from the zone containing @sector.
 *    The number of zone information reported may be less than the number
 *    requested by @nr_zones. The number of zones actually reported is
 *    returned in @nr_zones.
 */
int blkdev_report_zones(struct block_device *bdev, sector_t sector,
			struct blk_zone *zones, unsigned int *nr_zones,
			gfp_t gfp_mask)
{
	struct request_queue *q = bdev_get_queue(bdev);
	unsigned int i, nrz;
	int ret;

	if (!blk_queue_is_zoned(q))
		return -EOPNOTSUPP;

	/*
	 * A block device that advertized itself as zoned must have a
	 * report_zones method. If it does not have one defined, the device
	 * driver has a bug. So warn about that.
	 */
	if (WARN_ON_ONCE(!bdev->bd_disk->fops->report_zones))
		return -EOPNOTSUPP;

	if (!*nr_zones || sector >= bdev->bd_part->nr_sects) {
		*nr_zones = 0;
		return 0;
	}

	nrz = min(*nr_zones,
		  __blkdev_nr_zones(q, bdev->bd_part->nr_sects - sector));
	ret = blk_report_zones(bdev->bd_disk, get_start_sect(bdev) + sector,
			       zones, &nrz, gfp_mask);
	if (ret)
		return ret;

	for (i = 0; i < nrz; i++) {
		if (!blkdev_report_zone(bdev, zones))
			break;
		zones++;
	}

	*nr_zones = i;

	return 0;
}
コード例 #7
0
ファイル: blk-zoned.c プロジェクト: austriancoder/linux
/**
 * blk_revalidate_disk_zones - (re)allocate and initialize zone bitmaps
 * @disk:	Target disk
 *
 * Helper function for low-level device drivers to (re) allocate and initialize
 * a disk request queue zone bitmaps. This functions should normally be called
 * within the disk ->revalidate method. For BIO based queues, no zone bitmap
 * is allocated.
 */
int blk_revalidate_disk_zones(struct gendisk *disk)
{
	struct request_queue *q = disk->queue;
	unsigned int nr_zones = __blkdev_nr_zones(q, get_capacity(disk));
	unsigned long *seq_zones_wlock = NULL, *seq_zones_bitmap = NULL;
	unsigned int i, rep_nr_zones = 0, z = 0, nrz;
	struct blk_zone *zones = NULL;
	sector_t sector = 0;
	int ret = 0;

	/*
	 * BIO based queues do not use a scheduler so only q->nr_zones
	 * needs to be updated so that the sysfs exposed value is correct.
	 */
	if (!queue_is_rq_based(q)) {
		q->nr_zones = nr_zones;
		return 0;
	}

	if (!blk_queue_is_zoned(q) || !nr_zones) {
		nr_zones = 0;
		goto update;
	}

	/* Allocate bitmaps */
	ret = -ENOMEM;
	seq_zones_wlock = blk_alloc_zone_bitmap(q->node, nr_zones);
	if (!seq_zones_wlock)
		goto out;
	seq_zones_bitmap = blk_alloc_zone_bitmap(q->node, nr_zones);
	if (!seq_zones_bitmap)
		goto out;

	/* Get zone information and initialize seq_zones_bitmap */
	rep_nr_zones = nr_zones;
	zones = blk_alloc_zones(q->node, &rep_nr_zones);
	if (!zones)
		goto out;

	while (z < nr_zones) {
		nrz = min(nr_zones - z, rep_nr_zones);
		ret = blk_report_zones(disk, sector, zones, &nrz, GFP_NOIO);
		if (ret)
			goto out;
		if (!nrz)
			break;
		for (i = 0; i < nrz; i++) {
			if (zones[i].type != BLK_ZONE_TYPE_CONVENTIONAL)
				set_bit(z, seq_zones_bitmap);
			z++;
		}
		sector += nrz * blk_queue_zone_sectors(q);
	}

	if (WARN_ON(z != nr_zones)) {
		ret = -EIO;
		goto out;
	}

update:
	/*
	 * Install the new bitmaps, making sure the queue is stopped and
	 * all I/Os are completed (i.e. a scheduler is not referencing the
	 * bitmaps).
	 */
	blk_mq_freeze_queue(q);
	q->nr_zones = nr_zones;
	swap(q->seq_zones_wlock, seq_zones_wlock);
	swap(q->seq_zones_bitmap, seq_zones_bitmap);
	blk_mq_unfreeze_queue(q);

out:
	free_pages((unsigned long)zones,
		   get_order(rep_nr_zones * sizeof(struct blk_zone)));
	kfree(seq_zones_wlock);
	kfree(seq_zones_bitmap);

	if (ret) {
		pr_warn("%s: failed to revalidate zones\n", disk->disk_name);
		blk_mq_freeze_queue(q);
		blk_queue_free_zone_bitmaps(q);
		blk_mq_unfreeze_queue(q);
	}

	return ret;
}
コード例 #8
0
/**
 * blkdev_report_zones - Get zones information
 * @bdev:	Target block device
 * @sector:	Sector from which to report zones
 * @zones:	Array of zone structures where to return the zones information
 * @nr_zones:	Number of zone structures in the zone array
 * @gfp_mask:	Memory allocation flags (for bio_alloc)
 *
 * Description:
 *    Get zone information starting from the zone containing @sector.
 *    The number of zone information reported may be less than the number
 *    requested by @nr_zones. The number of zones actually reported is
 *    returned in @nr_zones.
 */
int blkdev_report_zones(struct block_device *bdev,
			sector_t sector,
			struct blk_zone *zones,
			unsigned int *nr_zones,
			gfp_t gfp_mask)
{
	struct request_queue *q = bdev_get_queue(bdev);
	struct blk_zone_report_hdr *hdr;
	unsigned int nrz = *nr_zones;
	struct page *page;
	unsigned int nr_rep;
	size_t rep_bytes;
	unsigned int nr_pages;
	struct bio *bio;
	struct bio_vec *bv;
	unsigned int i, n, nz;
	unsigned int ofst;
	void *addr;
	int ret = 0;

	if (!q)
		return -ENXIO;

	if (!blk_queue_is_zoned(q))
		return -EOPNOTSUPP;

	if (!nrz)
		return 0;

	if (sector > bdev->bd_part->nr_sects) {
		*nr_zones = 0;
		return 0;
	}

	/*
	 * The zone report has a header. So make room for it in the
	 * payload. Also make sure that the report fits in a single BIO
	 * that will not be split down the stack.
	 */
	rep_bytes = sizeof(struct blk_zone_report_hdr) +
		sizeof(struct blk_zone) * nrz;
	rep_bytes = (rep_bytes + PAGE_SIZE - 1) & PAGE_MASK;
	if (rep_bytes > (queue_max_sectors(q) << 9))
		rep_bytes = queue_max_sectors(q) << 9;

	nr_pages = min_t(unsigned int, BIO_MAX_PAGES,
			 rep_bytes >> PAGE_SHIFT);
	nr_pages = min_t(unsigned int, nr_pages,
			 queue_max_segments(q));

	bio = bio_alloc(gfp_mask, nr_pages);
	if (!bio)
		return -ENOMEM;

	bio->bi_bdev = bdev;
	bio->bi_iter.bi_sector = blk_zone_start(q, sector);
	bio_set_op_attrs(bio, REQ_OP_ZONE_REPORT, 0);

	for (i = 0; i < nr_pages; i++) {
		page = alloc_page(gfp_mask);
		if (!page) {
			ret = -ENOMEM;
			goto out;
		}
		if (!bio_add_page(bio, page, PAGE_SIZE, 0)) {
			__free_page(page);
			break;
		}
	}

	if (i == 0)
		ret = -ENOMEM;
	else
		ret = submit_bio_wait(bio);
	if (ret)
		goto out;

	/*
	 * Process the report result: skip the header and go through the
	 * reported zones to fixup and fixup the zone information for
	 * partitions. At the same time, return the zone information into
	 * the zone array.
	 */
	n = 0;
	nz = 0;
	nr_rep = 0;
	bio_for_each_segment_all(bv, bio, i) {

		if (!bv->bv_page)
			break;

		addr = kmap_atomic(bv->bv_page);

		/* Get header in the first page */
		ofst = 0;
		if (!nr_rep) {
			hdr = (struct blk_zone_report_hdr *) addr;
			nr_rep = hdr->nr_zones;
			ofst = sizeof(struct blk_zone_report_hdr);
		}

		/* Fixup and report zones */
		while (ofst < bv->bv_len &&
		       n < nr_rep && nz < nrz) {
			if (blkdev_report_zone(bdev, addr + ofst, &zones[nz]))
				nz++;
			ofst += sizeof(struct blk_zone);
			n++;
		}

		kunmap_atomic(addr);

		if (n >= nr_rep || nz >= nrz)
			break;

	}

out:
	bio_for_each_segment_all(bv, bio, i)
		__free_page(bv->bv_page);
	bio_put(bio);

	if (ret == 0)
		*nr_zones = nz;

	return ret;
}