static int fd_configure_device(struct se_device *dev)
{
struct fd_dev *fd_dev = FD_DEV(dev);
struct fd_host *fd_host = dev->se_hba->hba_ptr;
struct file *file;
struct inode *inode = NULL;
int flags, ret = -EINVAL;
if (!(fd_dev->fbd_flags & FBDF_HAS_PATH)) {
pr_err("Missing fd_dev_name=\n");
return -EINVAL;
}
/*
* Use O_DSYNC by default instead of O_SYNC to forgo syncing
* of pure timestamp updates.
*/
flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC;
/*
* Optionally allow fd_buffered_io=1 to be enabled for people
* who want use the fs buffer cache as an WriteCache mechanism.
*
* This means that in event of a hard failure, there is a risk
* of silent data-loss if the SCSI client has *not* performed a
* forced unit access (FUA) write, or issued SYNCHRONIZE_CACHE
* to write-out the entire device cache.
*/
if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) {
pr_debug("FILEIO: Disabling O_DSYNC, using buffered FILEIO\n");
flags &= ~O_DSYNC;
}
file = filp_open(fd_dev->fd_dev_name, flags, 0600);
if (IS_ERR(file)) {
pr_err("filp_open(%s) failed\n", fd_dev->fd_dev_name);
ret = PTR_ERR(file);
goto fail;
}
fd_dev->fd_file = file;
/*
* If using a block backend with this struct file, we extract
* fd_dev->fd_[block,dev]_size from struct block_device.
*
* Otherwise, we use the passed fd_size= from configfs
*/
inode = file->f_mapping->host;
if (S_ISBLK(inode->i_mode)) {
struct request_queue *q = bdev_get_queue(inode->i_bdev);
unsigned long long dev_size;
fd_dev->fd_block_size = bdev_logical_block_size(inode->i_bdev);
/*
* Determine the number of bytes from i_size_read() minus
* one (1) logical sector from underlying struct block_device
*/
dev_size = (i_size_read(file->f_mapping->host) -
fd_dev->fd_block_size);
pr_debug("FILEIO: Using size: %llu bytes from struct"
" block_device blocks: %llu logical_block_size: %d\n",
dev_size, div_u64(dev_size, fd_dev->fd_block_size),
fd_dev->fd_block_size);
/*
* Check if the underlying struct block_device request_queue supports
* the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
* in ATA and we need to set TPE=1
*/
if (blk_queue_discard(q)) {
dev->dev_attrib.max_unmap_lba_count =
q->limits.max_discard_sectors;
/*
* Currently hardcoded to 1 in Linux/SCSI code..
*/
dev->dev_attrib.max_unmap_block_desc_count = 1;
dev->dev_attrib.unmap_granularity =
q->limits.discard_granularity >> 9;
dev->dev_attrib.unmap_granularity_alignment =
q->limits.discard_alignment;
pr_debug("IFILE: BLOCK Discard support available,"
" disabled by default\n");
}
/*
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
*/
dev->dev_attrib.max_write_same_len = 0xFFFF;
if (blk_queue_nonrot(q))
dev->dev_attrib.is_nonrot = 1;
} else {
if (!(fd_dev->fbd_flags & FBDF_HAS_SIZE)) {
static int fd_configure_device(struct se_device *dev)
{
struct fd_dev *fd_dev = FD_DEV(dev);
struct fd_host *fd_host = dev->se_hba->hba_ptr;
struct file *file;
struct inode *inode = NULL;
int flags, ret = -EINVAL;
if (!(fd_dev->fbd_flags & FBDF_HAS_PATH)) {
pr_err("Missing fd_dev_name=\n");
return -EINVAL;
}
/*
* Use O_DSYNC by default instead of O_SYNC to forgo syncing
* of pure timestamp updates.
*/
flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC;
/*
* Optionally allow fd_buffered_io=1 to be enabled for people
* who want use the fs buffer cache as an WriteCache mechanism.
*
* This means that in event of a hard failure, there is a risk
* of silent data-loss if the SCSI client has *not* performed a
* forced unit access (FUA) write, or issued SYNCHRONIZE_CACHE
* to write-out the entire device cache.
*/
if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) {
pr_debug("FILEIO: Disabling O_DSYNC, using buffered FILEIO\n");
flags &= ~O_DSYNC;
}
file = filp_open(fd_dev->fd_dev_name, flags, 0600);
if (IS_ERR(file)) {
pr_err("filp_open(%s) failed\n", fd_dev->fd_dev_name);
ret = PTR_ERR(file);
goto fail;
}
fd_dev->fd_file = file;
/*
* If using a block backend with this struct file, we extract
* fd_dev->fd_[block,dev]_size from struct block_device.
*
* Otherwise, we use the passed fd_size= from configfs
*/
inode = file->f_mapping->host;
if (S_ISBLK(inode->i_mode)) {
struct request_queue *q = bdev_get_queue(inode->i_bdev);
unsigned long long dev_size;
fd_dev->fd_block_size = bdev_logical_block_size(inode->i_bdev);
/*
* Determine the number of bytes from i_size_read() minus
* one (1) logical sector from underlying struct block_device
*/
dev_size = (i_size_read(file->f_mapping->host) -
fd_dev->fd_block_size);
pr_debug("FILEIO: Using size: %llu bytes from struct"
" block_device blocks: %llu logical_block_size: %d\n",
dev_size, div_u64(dev_size, fd_dev->fd_block_size),
fd_dev->fd_block_size);
if (target_configure_unmap_from_queue(&dev->dev_attrib, q))
pr_debug("IFILE: BLOCK Discard support available,"
" disabled by default\n");
/*
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
*/
dev->dev_attrib.max_write_same_len = 0xFFFF;
if (blk_queue_nonrot(q))
dev->dev_attrib.is_nonrot = 1;
} else {
if (!(fd_dev->fbd_flags & FBDF_HAS_SIZE)) {
pr_err("FILEIO: Missing fd_dev_size="
" parameter, and no backing struct"
" block_device\n");
goto fail;
}
fd_dev->fd_block_size = FD_BLOCKSIZE;
/*
* Limit UNMAP emulation to 8k Number of LBAs (NoLB)
*/
dev->dev_attrib.max_unmap_lba_count = 0x2000;
/*
* Currently hardcoded to 1 in Linux/SCSI code..
*/
dev->dev_attrib.max_unmap_block_desc_count = 1;
dev->dev_attrib.unmap_granularity = 1;
dev->dev_attrib.unmap_granularity_alignment = 0;
/*
* Limit WRITE_SAME w/ UNMAP=0 emulation to 8k Number of LBAs (NoLB)
* based upon struct iovec limit for vfs_writev()
*/
dev->dev_attrib.max_write_same_len = 0x1000;
}
dev->dev_attrib.hw_block_size = fd_dev->fd_block_size;
dev->dev_attrib.max_bytes_per_io = FD_MAX_BYTES;
dev->dev_attrib.hw_max_sectors = FD_MAX_BYTES / fd_dev->fd_block_size;
dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH;
if (fd_dev->fbd_flags & FDBD_HAS_BUFFERED_IO_WCE) {
pr_debug("FILEIO: Forcing setting of emulate_write_cache=1"
" with FDBD_HAS_BUFFERED_IO_WCE\n");
dev->dev_attrib.emulate_write_cache = 1;
}
fd_dev->fd_dev_id = fd_host->fd_host_dev_id_count++;
fd_dev->fd_queue_depth = dev->queue_depth;
pr_debug("CORE_FILE[%u] - Added TCM FILEIO Device ID: %u at %s,"
" %llu total bytes\n", fd_host->fd_host_id, fd_dev->fd_dev_id,
fd_dev->fd_dev_name, fd_dev->fd_dev_size);
return 0;
fail:
if (fd_dev->fd_file) {
filp_close(fd_dev->fd_file, NULL);
fd_dev->fd_file = NULL;
}
return ret;
}
static int iblock_configure_device(struct se_device *dev)
{
struct iblock_dev *ib_dev = IBLOCK_DEV(dev);
struct request_queue *q;
struct block_device *bd = NULL;
fmode_t mode;
int ret = -ENOMEM;
if (!(ib_dev->ibd_flags & IBDF_HAS_UDEV_PATH)) {
pr_err("Missing udev_path= parameters for IBLOCK\n");
return -EINVAL;
}
ib_dev->ibd_bio_set = bioset_create(IBLOCK_BIO_POOL_SIZE, 0);
if (!ib_dev->ibd_bio_set) {
pr_err("IBLOCK: Unable to create bioset\n");
goto out;
}
pr_debug( "IBLOCK: Claiming struct block_device: %s\n",
ib_dev->ibd_udev_path);
mode = FMODE_READ|FMODE_EXCL;
if (!ib_dev->ibd_readonly)
mode |= FMODE_WRITE;
bd = blkdev_get_by_path(ib_dev->ibd_udev_path, mode, ib_dev);
if (IS_ERR(bd)) {
ret = PTR_ERR(bd);
goto out_free_bioset;
}
ib_dev->ibd_bd = bd;
q = bdev_get_queue(bd);
dev->dev_attrib.hw_block_size = bdev_logical_block_size(bd);
dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q);
dev->dev_attrib.hw_queue_depth = q->nr_requests;
/*
* Check if the underlying struct block_device request_queue supports
* the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM
* in ATA and we need to set TPE=1
*/
if (blk_queue_discard(q)) {
dev->dev_attrib.max_unmap_lba_count =
q->limits.max_discard_sectors;
/*
* Currently hardcoded to 1 in Linux/SCSI code..
*/
dev->dev_attrib.max_unmap_block_desc_count = 1;
dev->dev_attrib.unmap_granularity =
q->limits.discard_granularity >> 9;
dev->dev_attrib.unmap_granularity_alignment =
q->limits.discard_alignment;
pr_debug("IBLOCK: BLOCK Discard support available,"
" disabled by default\n");
}
/*
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
*/
dev->dev_attrib.max_write_same_len = 0xFFFF;
if (blk_queue_nonrot(q))
dev->dev_attrib.is_nonrot = 1;
return 0;
out_free_bioset:
bioset_free(ib_dev->ibd_bio_set);
ib_dev->ibd_bio_set = NULL;
out:
return ret;
}
static ssize_t queue_nonrot_show(struct request_queue *q, char *page)
{
return queue_var_show(!blk_queue_nonrot(q), page);
}
