bool CipherExample (KCipher * cipher)
{
uint8_t cipher_text [16];
rc_t rc;
bool passed_key;
bool passed_block;
memset (cipher_text, 0, sizeof cipher_text);
rc = KCipherSetEncryptKey (cipher, b.key, 128/8);
if (rc)
;
else
{
passed_key = key_compare (&b.key_schedule, cipher->encrypt_key);
rc = KCipherEncrypt (cipher, b.plain, cipher_text);
if (rc)
;
else
{
passed_block = block_compare (b.cipher, cipher_text);
}
}
if (rc)
{
STSMSG (1,("Could not run test"));
return false;
}
return passed_key && passed_block;
}
/**
*
* \brief Test search and double buffering (link) modes
*
* \note This function tests search and double buffering features of the EDMA
* controller by configuring channel 2 searching data. In case of success, the
* channel 0 is automatically (double buffering) enables (if it is
* successfull) and copies a memory block. The copy is verified.
*
* \param test Current test case
*/
static void run_edma_search_dbuf_test(const struct test_case *test)
{
struct edma_channel_config ch0_config_params;
struct edma_channel_config ch2_config_params;
bool success;
/* Fill source block with pattern data */
set_buffer(memory_block_src, 0x00);
block_fill(memory_block_src, MEMORY_BLOCK_SIZE);
/* Null out the destination block */
set_buffer(memory_block_dest, 0x00);
/* Null out the config params */
memset(&ch0_config_params, 0, sizeof(ch0_config_params));
memset(&ch2_config_params, 0, sizeof(ch2_config_params));
/* Enable EDMA module, Channels 0 and 2 in standard configuration */
edma_enable(EDMA_CHMODE_STD02_gc);
/* Enable double buffering mode on channel 0 and 1 */
edma_set_double_buffer_mode(EDMA_DBUFMODE_BUF0123_gc);
/* Set channel 2 to search data (last byte of memory_block_src[]) */
edma_channel_set_src_reload_mode(&ch2_config_params,
EDMA_CH_RELOAD_NONE_gc);
edma_channel_set_src_dir_mode(&ch2_config_params, EDMA_CH_DIR_INC_gc);
edma_channel_set_dest_reload_mode(&ch2_config_params,
EDMA_CH_RELOAD_NONE_gc);
edma_channel_set_search_mode(&ch2_config_params,
EDMA_CH_DESTDIR_MP1_gc);
edma_channel_set_burst_length(&ch2_config_params,
EDMA_CH_BURSTLEN_1BYTE_gc);
edma_channel_set_trigger_source(&ch2_config_params,
EDMA_CH_TRIGSRC_OFF_gc);
edma_channel_set_transfer_count16(&ch2_config_params,
MEMORY_BLOCK_SIZE);
edma_channel_set_source_address(&ch2_config_params,
(uint16_t)(uintptr_t)memory_block_src);
edma_channel_set_search_data(&ch2_config_params,
memory_block_src[MEMORY_BLOCK_SIZE - 1], 0xFF);
/* Write config channel 2 */
edma_channel_write_config(EDMA_CH_2, &ch2_config_params);
/*
* Set channel 0 to copy from memory_block_src[] to memory_block_dest[]
* once a match will occur on channel 2. There will be no transfer if no
* match occurs.
*/
edma_channel_set_repeat(&ch0_config_params);
edma_channel_set_burst_length(&ch0_config_params,
EDMA_CH_BURSTLEN_2BYTE_gc);
edma_channel_set_src_reload_mode(&ch0_config_params,
EDMA_CH_RELOAD_TRANSACTION_gc);
edma_channel_set_dest_reload_mode(&ch0_config_params,
EDMA_CH_RELOAD_TRANSACTION_gc);
edma_channel_set_src_dir_mode(&ch0_config_params, EDMA_CH_DIR_INC_gc);
edma_channel_set_dest_dir_mode(&ch0_config_params,
EDMA_CH_DESTDIR_INC_gc);
edma_channel_set_trigger_source(&ch0_config_params,
EDMA_CH_TRIGSRC_OFF_gc);
edma_channel_set_transfer_count16(&ch0_config_params,
MEMORY_BLOCK_SIZE);
edma_channel_set_source_address(&ch0_config_params,
(uint16_t)(uintptr_t)memory_block_src);
edma_channel_set_destination_address(&ch0_config_params,
(uint16_t)(uintptr_t)memory_block_dest);
/* Write config channel 0 */
edma_channel_write_config(EDMA_CH_0, &ch0_config_params);
/* Enable only channel 2 */
edma_channel_enable(EDMA_CH_2);
/* Transfer block and wait for it to finish */
edma_channel_trigger_block_transfer(EDMA_CH_2);
edma_channel_trigger_block_transfer(EDMA_CH_0);
/* Wait for search completion */
while (edma_get_channel_status(EDMA_CH_2) !=
EDMA_CH_TRANSFER_COMPLETED) {
/* Intentionally left empty */
}
/* Wait for transfer completion */
while (edma_get_channel_status(EDMA_CH_0) !=
EDMA_CH_TRANSFER_COMPLETED) {
/* Intentionally left empty */
}
/* Disable EDMA */
edma_disable();
/* Verify that the search result is as expected */
success = block_compare(
edma_channel_get_search_pointer(EDMA_CH_2),
&memory_block_src[MEMORY_BLOCK_SIZE - 1], 1);
test_assert_true(test, success,
"SEARCH mode did not function properly");
/* Verify that the transfer result is as expected */
success = block_compare(memory_block_src, memory_block_dest,
MEMORY_BLOCK_SIZE);
test_assert_true(test, success,
"DOUBLE BUFFER mode did not function properly");
}
/**
* \brief Test read from fixed location, trigger from timer and callback
*
* \note This test sets up a timer to trigger the EDMA module,
* which in turn reads the timer45_overflow_counter variable and writes
* it to memory sequentially. It then checks to see that the memory block
* written is sequential according to the overflow count. This test uses the
* event system wired on timer45 overflow as trigger.
*
* \param test Current test
*/
static void run_edma_triggered_with_callback(const struct test_case *test)
{
struct edma_channel_config config_params;
bool success;
/* Null the buffer */
set_buffer(dest_block_tc45, 0x0000);
/* Null out the config parameter struct */
memset(&config_params, 0, sizeof(config_params));
/* Enable the Event System on EVSYS_CH_2 */
EVSYS.CH2MUX = EVSYS_CHMUX_TCC4_OVF_gc;
/*
* Enable the timer, and set it to count up.
* When it overflows, it triggers the EDMA to
* read timer45_overflow_counter.
*/
tc45_set_overflow_interrupt_callback(&TIMER45,
timer45_overflow_callback);
tc45_enable(&TIMER45);
tc45_set_overflow_interrupt_level(&TIMER45, TC45_INT_LVL_LO);
tc45_set_direction(&TIMER45, TC45_UP);
tc45_write_period(&TIMER45, TIMER45_PERIOD);
tc45_set_resolution(&TIMER45, TIMER45_RESOLUTION);
/*
* Enable the EDMA module, standard channel 0,
* peripheral channels 2 and 3
*/
edma_enable(EDMA_CHMODE_STD0_gc);
/* Set callback for transfer done */
edma_set_callback(EDMA_CH_0, ut_edma_transfer_is_complete);
/* Set low interrupt level */
edma_channel_set_interrupt_level(&config_params, EDMA_INT_LVL_LO);
/* Set up the EDMA to read the timer value
*
* - Single shot transfer mode
* - 1 byte (16-bit) burst length
* - Increment on source and destination
* - Reload on burst for source
* - No reload for destination
*/
edma_channel_set_single_shot(&config_params);
edma_channel_set_burst_length(&config_params,
EDMA_CH_BURSTLEN_1BYTE_gc);
edma_channel_set_src_reload_mode(&config_params,
EDMA_CH_RELOAD_BURST_gc);
edma_channel_set_src_dir_mode(&config_params, EDMA_CH_DIR_FIXED_gc);
edma_channel_set_dest_reload_mode(&config_params,
EDMA_CH_RELOAD_NONE_gc);
edma_channel_set_dest_dir_mode(&config_params, EDMA_CH_DESTDIR_INC_gc);
/* Set trigger source to Event Channel 2 (set to TCC4's overflow) */
edma_channel_set_trigger_source(&config_params,
EDMA_CH_TRIGSRC_EVSYS_CH2_gc);
/* Transfer DEST_BLOCK_TC45_SIZE bytes */
edma_channel_set_transfer_count16(&config_params, DEST_BLOCK_TC45_SIZE);
/* Set address */
edma_channel_set_source_address(&config_params,
(uint16_t)(uintptr_t)&timer45_overflow_counter);
edma_channel_set_destination_address(&config_params,
(uint16_t)(uintptr_t)dest_block_tc45);
/* Reset the channel */
edma_channel_reset(EDMA_CH_0);
/* Write the config */
edma_channel_write_config(EDMA_CH_0, &config_params);
/* Enable the channel */
edma_channel_enable(EDMA_CH_0);
/* Wait for transfer to finish */
while (!edma_has_completed) {
/* Intentionally left empty */
}
/* Disable EDMA and stop TC45 interrupts */
tc45_set_overflow_interrupt_level(&TIMER45, TC45_INT_LVL_OFF);
edma_disable();
/* Verify that the result is as expected */
success = block_compare(dest_block_tc45, expected_result_tc,
DEST_BLOCK_TC45_SIZE);
test_assert_true(test, success, "Result is not as expected");
/*
* Stop TIMER45:
* Already done in EDMA callback "ut_edma_transfer_is_complete()"
*/
}
/**
* \brief Test the different burst lengths by copying on all channels
*
* \note This test copies a memory block using different burst lengths,
* and verifies that they have been copied correctly, thereby testing both
* burst lengths and memory transfer.
*
* \param test Current test
*/
static void run_edma_memory_copy_burst_length_test(const struct test_case *test)
{
struct edma_channel_config config_params;
edma_channel_num_t channel_index;
bool success = true; /* Assume everything goes well */
/* Fill the source block with our known pattern */
set_buffer(memory_block_src, 0x00);
block_fill(memory_block_src, MEMORY_BLOCK_SIZE);
/* Null out the config params */
memset(&config_params, 0, sizeof(config_params));
/* Enable EDMA, channels 0 and 2 in standard conf. */
edma_enable(EDMA_CHMODE_STD02_gc);
/*
* - No reload on source and destination
* - Increment source and destination
*/
edma_channel_set_src_reload_mode(&config_params,
EDMA_CH_RELOAD_NONE_gc);
edma_channel_set_src_dir_mode(&config_params, EDMA_CH_DIR_INC_gc);
edma_channel_set_dest_reload_mode(&config_params,
EDMA_CH_RELOAD_NONE_gc);
edma_channel_set_dest_dir_mode(&config_params, EDMA_CH_DESTDIR_INC_gc);
edma_channel_set_transfer_count16(&config_params, MEMORY_BLOCK_SIZE);
edma_channel_set_source_address(&config_params,
(uint16_t)(uintptr_t)memory_block_src);
edma_channel_set_destination_address(&config_params,
(uint16_t)(uintptr_t)memory_block_dest);
/* Test burst lengths on all standard channels */
for (channel_index = EDMA_CH_0;
channel_index < EDMA_NUMBER_OF_STANDARD_CHANNELS;
channel_index += 2) {
edma_channel_set_burst_length(&config_params,
EDMA_CH_BURSTLEN_1BYTE_gc);
edma_channel_write_config(channel_index, &config_params);
/* Clear destination */
set_buffer(memory_block_dest, 0x00);
/* Enable channel, transfer, and disable it */
edma_channel_enable(channel_index);
ut_edma_transfer_block(channel_index);
edma_channel_disable(channel_index);
/* Check that source and destination are equal */
success = block_compare(memory_block_src, memory_block_dest,
MEMORY_BLOCK_SIZE);
if (!success) {
break;
}
/* Reset channel and write 2 byte burst length */
edma_channel_reset(channel_index);
edma_channel_set_burst_length(&config_params,
EDMA_CH_BURSTLEN_2BYTE_gc);
edma_channel_write_config(channel_index, &config_params);
/* Clear destination */
set_buffer(memory_block_dest, 0x00);
/* Enable channel, transfer, and disable it */
edma_channel_enable(channel_index);
ut_edma_transfer_block(channel_index);
edma_channel_disable(channel_index);
/* Check that source and destination are equal */
success = block_compare(memory_block_src, memory_block_dest,
MEMORY_BLOCK_SIZE);
/* test_assert_true(test, false, "Test-1 "); */
if (!success) {
break;
}
}
/* Disable EDMA */
edma_disable();
test_assert_true(test,
success,
"EDMA burst mode memory copy tests failed on StdCH_%d",
channel_index);
}
bool ExampleVector (KCipher * cipher, const example_vectors * ev)
{
uint8_t cipher_text [16];
uint8_t plain_text [16];
uint32_t Nk;
rc_t rc;
bool passed_enckey;
bool passed_deckey;
bool passed_enc;
bool passed_dec;
switch (ev->key_enc.rounds)
{
default:
STSMSG (1,("Bad test vector"));
return false;
case 10:
Nk = 16;
break;
case 12:
Nk = 24;
break;
case 14:
Nk = 32;
break;
}
memset (cipher_text, 0, sizeof cipher_text);
memset (plain_text, 0, sizeof plain_text);
rc = KCipherSetEncryptKey (cipher, ev->key, Nk);
if (rc)
;
else
{
passed_enckey = key_compare (&ev->key_enc, cipher->encrypt_key);
rc = KCipherSetDecryptKey (cipher, ev->key, Nk);
if (rc)
;
else
{
#if COMPARE_INV_CIPHER
passed_deckey = key_compare (&ev->key_dec, cipher->decrypt_key);
#endif
#if COMPARE_EQ_INV_CIPHER
passed_deckey = key_compare (&ev->key_dec_alt, cipher->decrypt_key);
#endif
rc = KCipherEncrypt (cipher, ev->plain, cipher_text);
if (rc)
;
else
{
passed_enc = block_compare (ev->cipher, cipher_text);
rc = KCipherDecrypt (cipher, ev->cipher, plain_text);
if (rc)
;
else
{
passed_dec = block_compare (ev->plain, plain_text);
}
}
}
}
if (rc)
{
STSMSG (1,("Could not run test"));
return false;
}
return passed_enckey && passed_deckey && passed_enc && passed_dec;
}
/**
* \brief Test read from fixed location, trigger from timer and callback
*
* \note This test sets up a timer to trigger the DMA module,
* which in turn reads the timer_overflow_counter variable and writes
* it to memory sequentially. It then checks to see that the memory block
* written is sequential according to the overflow count.
*
* \param test Current test
*/
static void run_dma_triggered_with_callback(const struct test_case *test)
{
struct dma_channel_config config_params;
bool success;
/* Null the buffer */
set_buffer(dest_block_tc, 0x0000);
/* Null out the config parameter struct */
memset(&config_params, 0, sizeof(config_params));
/*
* Enable the timer, and set it to count up.
* When it overflows, it triggers the DMA to
* read timer_overflow_counter. */
tc_enable(&TIMER);
tc_set_direction(&TIMER, TC_UP);
tc_write_period(&TIMER, TIMER_PERIOD);
tc_set_resolution(&TIMER, TIMER_RESOLUTION);
tc_set_overflow_interrupt_level(&TIMER, PMIC_LVL_LOW);
tc_set_overflow_interrupt_callback(&TIMER, timer_overflow_callback);
/* Enable the DMA module */
dma_enable();
/* Set callback for transfer done */
dma_set_callback(DMA_CHANNEL_0, dma_transfer_is_complete);
/* Set low interrupt level */
dma_channel_set_interrupt_level(&config_params, PMIC_LVL_LOW);
/* Set up the DMA to read the timer value
*
* - Single shot transfer mode
* - Two byte (16-bit) burst length
* - Increment on source and destination
* - Reload on burst for source
* - No reload for destination
*/
dma_channel_set_single_shot(&config_params);
dma_channel_set_burst_length(&config_params,
DMA_CH_BURSTLEN_1BYTE_gc);
dma_channel_set_src_reload_mode(&config_params,
DMA_CH_SRCRELOAD_BURST_gc);
dma_channel_set_src_dir_mode(&config_params,
DMA_CH_SRCDIR_FIXED_gc);
dma_channel_set_dest_reload_mode(&config_params,
DMA_CH_DESTRELOAD_NONE_gc);
dma_channel_set_dest_dir_mode(&config_params,
DMA_CH_DESTDIR_INC_gc);
/* Set trigger source to TCC0's overflow */
dma_channel_set_trigger_source(&config_params,
DMA_CH_TRIGSRC_TCC0_OVF_gc);
/* Transfer DEST_BLOCK_TC_SIZE bytes */
dma_channel_set_transfer_count(&config_params,
DEST_BLOCK_TC_SIZE);
/* Set address */
dma_channel_set_source_address(&config_params,
(uint16_t)(uintptr_t)&timer_overflow_counter);
dma_channel_set_destination_address(&config_params,
(uint16_t)(uintptr_t)dest_block_tc);
/* Reset the channel */
dma_channel_reset(DMA_CHANNEL_0);
/* Write the config */
dma_channel_write_config(DMA_CHANNEL_0, &config_params);
/* Enable the channel */
dma_channel_enable(DMA_CHANNEL_0);
/* Wait for transfer to finish */
while (!dma_has_completed) {
/* Intentionally left empty */
}
/* Disable DMA */
dma_disable();
/* Verify that the result is as expected */
success = block_compare(dest_block_tc,
expected_result_tc, DEST_BLOCK_TC_SIZE);
test_assert_true(test, success, "Result is not as expected");
}
/**
* \brief Test different directions on all channels
*
* \note This test copies the source memory block into the destination block
* in different ways.
*
* \param test Current test
*/
static void run_dma_direction_test(const struct test_case *test)
{
struct dma_channel_config config_params;
uint8_t channel_index;
bool success = true; /* Assume everything goes well */
/* Fill the source block with our known pattern */
set_buffer(memory_block_src, 0x00);
block_fill(memory_block_src, MEMORY_BLOCK_SIZE);
/* Null out the config params */
memset(&config_params, 0, sizeof(config_params));
/* Enable DMA */
dma_enable();
/* No reload on source and destination */
dma_channel_set_src_reload_mode(&config_params,
DMA_CH_SRCRELOAD_NONE_gc);
dma_channel_set_dest_reload_mode(&config_params,
DMA_CH_DESTRELOAD_NONE_gc);
dma_channel_set_transfer_count(&config_params,
MEMORY_BLOCK_SIZE);
dma_channel_set_burst_length(&config_params,
DMA_CH_BURSTLEN_1BYTE_gc);
/* Test a memory transfer on all channels */
for (channel_index = 0; channel_index < DMA_NUMBER_OF_CHANNELS;
channel_index++) {
/* Reset channel and write the configuration */
dma_channel_reset(channel_index);
/* Increment source, increment destination */
dma_channel_set_src_dir_mode(&config_params,
DMA_CH_SRCDIR_INC_gc);
dma_channel_set_dest_dir_mode(&config_params,
DMA_CH_DESTDIR_INC_gc);
/* Data starts from the first byte */
dma_channel_set_source_address(&config_params,
(uint16_t)(uintptr_t)memory_block_src);
dma_channel_set_destination_address(&config_params,
(uint16_t)(uintptr_t)memory_block_dest);
/* Write the config */
dma_channel_write_config(channel_index, &config_params);
/* Clear destination */
set_buffer(memory_block_dest, 0x00);
/* Enable channel, transfer, and disable it */
dma_channel_enable(channel_index);
dma_transfer_block(channel_index);
dma_channel_disable(channel_index);
/* Check that source and destination are equal */
success = block_compare(memory_block_src,
memory_block_dest, MEMORY_BLOCK_SIZE);
if (!success) {
break;
}
/* Reset channel and write the configuration */
dma_channel_reset(channel_index);
/* Decrement source, increment destination */
dma_channel_set_src_dir_mode(&config_params,
DMA_CH_SRCDIR_DEC_gc);
dma_channel_set_dest_dir_mode(&config_params,
DMA_CH_DESTDIR_INC_gc);
/* Data starts from the first byte */
dma_channel_set_source_address(&config_params,
(uint16_t)(uintptr_t)
(memory_block_src + MEMORY_BLOCK_SIZE - 1));
dma_channel_set_destination_address(&config_params,
(uint16_t)(uintptr_t)memory_block_dest);
/* Write the config */
dma_channel_write_config(channel_index, &config_params);
/* Clear destination */
set_buffer(memory_block_dest, 0x00);
/* Enable channel, transfer, and disable it */
dma_channel_enable(channel_index);
dma_transfer_block(channel_index);
dma_channel_disable(channel_index);
/* Check that destination is the reverse of source */
success = block_compare_reverse(memory_block_src,
memory_block_dest, MEMORY_BLOCK_SIZE);
if (!success) {
break;
}
/* Reset channel and write the configuration */
dma_channel_reset(channel_index);
/* Decrement source, increment destination */
dma_channel_set_src_dir_mode(&config_params,
DMA_CH_SRCDIR_INC_gc);
dma_channel_set_dest_dir_mode(&config_params,
DMA_CH_DESTDIR_DEC_gc);
/* Data starts from the first byte */
dma_channel_set_source_address(&config_params,
(uint16_t)(uintptr_t)memory_block_src);
dma_channel_set_destination_address(&config_params,
(uint16_t)(uintptr_t)
(memory_block_dest + MEMORY_BLOCK_SIZE - 1));
/* Write the config */
dma_channel_write_config(channel_index, &config_params);
/* Clear destination */
set_buffer(memory_block_dest, 0x00);
/* Enable channel, transfer, and disable it */
dma_channel_enable(channel_index);
dma_transfer_block(channel_index);
dma_channel_disable(channel_index);
/* Check that destination is the reverse of source */
success = block_compare_reverse(memory_block_src,
memory_block_dest, MEMORY_BLOCK_SIZE);
if (!success) {
break;
}
/* Reset channel and write the configuration */
dma_channel_reset(channel_index);
/* Decrement source, Decrement destination */
dma_channel_set_src_dir_mode(&config_params,
DMA_CH_SRCDIR_DEC_gc);
dma_channel_set_dest_dir_mode(&config_params,
DMA_CH_DESTDIR_DEC_gc);
/* Data starts from the first byte */
dma_channel_set_source_address(&config_params,
(uint16_t)(uintptr_t)
(memory_block_src + MEMORY_BLOCK_SIZE - 1));
dma_channel_set_destination_address(&config_params,
(uint16_t)(uintptr_t)
(memory_block_dest + MEMORY_BLOCK_SIZE - 1));
/* Write the config */
dma_channel_write_config(channel_index, &config_params);
/* Clear destination */
set_buffer(memory_block_dest, 0x00);
/* Enable channel, transfer, and disable it */
dma_channel_enable(channel_index);
dma_transfer_block(channel_index);
dma_channel_disable(channel_index);
/* Check that source and destination are equal */
success = block_compare(memory_block_src,
memory_block_dest, MEMORY_BLOCK_SIZE);
if (!success) {
break;
}
}
/* Disable DMA */
dma_disable();
test_assert_true(test, success,
"DMA direction copy test failed on channel %d",
channel_index);
}
