static bool
run_tests(const struct gen_device_info *devinfo)
{
brw_init_compaction_tables(devinfo);
bool fail = false;
for (unsigned i = 0; i < ARRAY_SIZE(tests); i++) {
for (int align_16 = 0; align_16 <= 1; align_16++) {
struct brw_codegen *p = rzalloc(NULL, struct brw_codegen);
brw_init_codegen(devinfo, p, p);
brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
if (align_16)
brw_set_default_access_mode(p, BRW_ALIGN_16);
else
brw_set_default_access_mode(p, BRW_ALIGN_1);
tests[i].func(p);
assert(p->nr_insn == 1);
if (!test_compact_instruction(p, p->store[0])) {
fail = true;
continue;
}
if (!test_fuzz_compact_instruction(p, p->store[0])) {
fail = true;
continue;
}
ralloc_free(p);
}
}
return fail;
}
void
brw_codegen_ff_gs_prog(struct brw_context *brw,
struct brw_ff_gs_prog_key *key)
{
struct brw_ff_gs_compile c;
const GLuint *program;
void *mem_ctx;
GLuint program_size;
memset(&c, 0, sizeof(c));
c.key = *key;
c.vue_map = brw->vs.prog_data->base.vue_map;
c.nr_regs = (c.vue_map.num_slots + 1)/2;
mem_ctx = ralloc_context(NULL);
/* Begin the compilation:
*/
brw_init_codegen(brw->intelScreen->devinfo, &c.func, mem_ctx);
c.func.single_program_flow = 1;
/* For some reason the thread is spawned with only 4 channels
* unmasked.
*/
brw_set_default_mask_control(&c.func, BRW_MASK_DISABLE);
if (brw->gen >= 6) {
unsigned num_verts;
bool check_edge_flag;
/* On Sandybridge, we use the GS for implementing transform feedback
* (called "Stream Out" in the PRM).
*/
switch (key->primitive) {
case _3DPRIM_POINTLIST:
num_verts = 1;
check_edge_flag = false;
break;
case _3DPRIM_LINELIST:
case _3DPRIM_LINESTRIP:
case _3DPRIM_LINELOOP:
num_verts = 2;
check_edge_flag = false;
break;
case _3DPRIM_TRILIST:
case _3DPRIM_TRIFAN:
case _3DPRIM_TRISTRIP:
case _3DPRIM_RECTLIST:
num_verts = 3;
check_edge_flag = false;
break;
case _3DPRIM_QUADLIST:
case _3DPRIM_QUADSTRIP:
case _3DPRIM_POLYGON:
num_verts = 3;
check_edge_flag = true;
break;
default:
unreachable("Unexpected primitive type in Gen6 SOL program.");
}
gen6_sol_program(&c, key, num_verts, check_edge_flag);
} else {
/* On Gen4-5, we use the GS to decompose certain types of primitives.
* Note that primitives which don't require a GS program have already
* been weeded out by now.
*/
switch (key->primitive) {
case _3DPRIM_QUADLIST:
brw_ff_gs_quads( &c, key );
break;
case _3DPRIM_QUADSTRIP:
brw_ff_gs_quad_strip( &c, key );
break;
case _3DPRIM_LINELOOP:
brw_ff_gs_lines( &c );
break;
default:
ralloc_free(mem_ctx);
return;
}
}
brw_compact_instructions(&c.func, 0, 0, NULL);
/* get the program
*/
program = brw_get_program(&c.func, &program_size);
if (unlikely(INTEL_DEBUG & DEBUG_GS)) {
fprintf(stderr, "gs:\n");
brw_disassemble(brw->intelScreen->devinfo, c.func.store,
0, program_size, stderr);
fprintf(stderr, "\n");
}
brw_upload_cache(&brw->cache, BRW_CACHE_FF_GS_PROG,
&c.key, sizeof(c.key),
program, program_size,
&c.prog_data, sizeof(c.prog_data),
&brw->ff_gs.prog_offset, &brw->ff_gs.prog_data);
ralloc_free(mem_ctx);
}
static void compile_clip_prog( struct brw_context *brw,
struct brw_clip_prog_key *key )
{
struct brw_clip_compile c;
const GLuint *program;
void *mem_ctx;
GLuint program_size;
memset(&c, 0, sizeof(c));
mem_ctx = ralloc_context(NULL);
/* Begin the compilation:
*/
brw_init_codegen(&brw->screen->devinfo, &c.func, mem_ctx);
c.func.single_program_flow = 1;
c.key = *key;
c.vue_map = brw->vue_map_geom_out;
/* nr_regs is the number of registers filled by reading data from the VUE.
* This program accesses the entire VUE, so nr_regs needs to be the size of
* the VUE (measured in pairs, since two slots are stored in each
* register).
*/
c.nr_regs = (c.vue_map.num_slots + 1)/2;
c.prog_data.clip_mode = c.key.clip_mode; /* XXX */
/* For some reason the thread is spawned with only 4 channels
* unmasked.
*/
brw_set_default_mask_control(&c.func, BRW_MASK_DISABLE);
/* Would ideally have the option of producing a program which could
* do all three:
*/
switch (key->primitive) {
case GL_TRIANGLES:
if (key->do_unfilled)
brw_emit_unfilled_clip( &c );
else
brw_emit_tri_clip( &c );
break;
case GL_LINES:
brw_emit_line_clip( &c );
break;
case GL_POINTS:
brw_emit_point_clip( &c );
break;
default:
unreachable("not reached");
}
brw_compact_instructions(&c.func, 0, 0, NULL);
/* get the program
*/
program = brw_get_program(&c.func, &program_size);
if (unlikely(INTEL_DEBUG & DEBUG_CLIP)) {
fprintf(stderr, "clip:\n");
brw_disassemble(&brw->screen->devinfo, c.func.store,
0, program_size, stderr);
fprintf(stderr, "\n");
}
brw_upload_cache(&brw->cache,
BRW_CACHE_CLIP_PROG,
&c.key, sizeof(c.key),
program, program_size,
&c.prog_data, sizeof(c.prog_data),
&brw->clip.prog_offset, &brw->clip.prog_data);
ralloc_free(mem_ctx);
}
static void compile_sf_prog( struct brw_context *brw,
struct brw_sf_prog_key *key )
{
struct brw_sf_compile c;
const GLuint *program;
void *mem_ctx;
GLuint program_size;
memset(&c, 0, sizeof(c));
mem_ctx = ralloc_context(NULL);
/* Begin the compilation:
*/
brw_init_codegen(brw->intelScreen->devinfo, &c.func, mem_ctx);
c.key = *key;
c.vue_map = brw->vue_map_geom_out;
if (c.key.do_point_coord) {
/*
* gl_PointCoord is a FS instead of VS builtin variable, thus it's
* not included in c.vue_map generated in VS stage. Here we add
* it manually to let SF shader generate the needed interpolation
* coefficient for FS shader.
*/
c.vue_map.varying_to_slot[BRW_VARYING_SLOT_PNTC] = c.vue_map.num_slots;
c.vue_map.slot_to_varying[c.vue_map.num_slots++] = BRW_VARYING_SLOT_PNTC;
}
c.urb_entry_read_offset = BRW_SF_URB_ENTRY_READ_OFFSET;
c.nr_attr_regs = (c.vue_map.num_slots + 1)/2 - c.urb_entry_read_offset;
c.nr_setup_regs = c.nr_attr_regs;
c.prog_data.urb_read_length = c.nr_attr_regs;
c.prog_data.urb_entry_size = c.nr_setup_regs * 2;
c.has_flat_shading = brw_any_flat_varyings(&key->interpolation_mode);
/* Which primitive? Or all three?
*/
switch (key->primitive) {
case SF_TRIANGLES:
c.nr_verts = 3;
brw_emit_tri_setup( &c, true );
break;
case SF_LINES:
c.nr_verts = 2;
brw_emit_line_setup( &c, true );
break;
case SF_POINTS:
c.nr_verts = 1;
if (key->do_point_sprite)
brw_emit_point_sprite_setup( &c, true );
else
brw_emit_point_setup( &c, true );
break;
case SF_UNFILLED_TRIS:
c.nr_verts = 3;
brw_emit_anyprim_setup( &c );
break;
default:
unreachable("not reached");
}
/* FINISHME: SF programs use calculated jumps (i.e., JMPI with a register
* source). Compacting would be difficult.
*/
/* brw_compact_instructions(&c.func, 0, 0, NULL); */
/* get the program
*/
program = brw_get_program(&c.func, &program_size);
if (unlikely(INTEL_DEBUG & DEBUG_SF)) {
fprintf(stderr, "sf:\n");
brw_disassemble(brw->intelScreen->devinfo,
c.func.store, 0, program_size, stderr);
fprintf(stderr, "\n");
}
brw_upload_cache(&brw->cache, BRW_CACHE_SF_PROG,
&c.key, sizeof(c.key),
program, program_size,
&c.prog_data, sizeof(c.prog_data),
&brw->sf.prog_offset, &brw->sf.prog_data);
ralloc_free(mem_ctx);
}
