/**
* @brief BT process calibration data
*
* @param priv a pointer to bt_private structure
* @param data a pointer to cal data
* @param size cal data size
* @param mac mac address buf
* @return BT_STATUS_SUCCESS or BT_STATUS_FAILURE
*/
int
bt_process_cal_cfg(bt_private * priv, u8 * data, u32 size, char *mac)
{
u8 bt_mac[ETH_ALEN];
u8 cal_data[32];
u8 *mac_data = NULL;
u32 cal_data_len;
int ret = BT_STATUS_FAILURE;
memset(bt_mac, 0, sizeof(bt_mac));
cal_data_len = sizeof(cal_data);
if (BT_STATUS_SUCCESS !=
bt_parse_cal_cfg(data, size, cal_data, &cal_data_len)) {
goto done;
}
if (mac != NULL) {
/* Convert MAC format */
bt_mac2u8(bt_mac, mac);
PRINTM(CMD, "HCI: new BT Address " MACSTR "\n",
MAC2STR(bt_mac));
mac_data = bt_mac;
}
if (BT_STATUS_SUCCESS != bt_load_cal_data(priv, cal_data, mac_data)) {
PRINTM(FATAL, "BT: Fail to load calibrate data\n");
goto done;
}
ret = BT_STATUS_SUCCESS;
done:
LEAVE();
return ret;
}
/**
* @brief BT process calibration data
*
* @param priv a pointer to bt_private structure
* @param data a pointer to cal data
* @param size cal data size
* @param mac mac address buf
* @return BT_STATUS_SUCCESS or BT_STATUS_FAILURE
*/
int
bt_process_cal_cfg(bt_private * priv, u8 * data, u32 size, char *mac)
{
u8 bt_mac[ETH_ALEN];
u8 cal_data[32];
int ret = BT_STATUS_FAILURE;
memset(bt_mac, 0, sizeof(bt_mac));
bt_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
if (mac != NULL) {
/* Convert MAC format */
bt_mac2u8(bt_mac, mac);
PRINTM(CMD,
"HCI: new BT Address %02x:%02x:%02x:%02x:%02x:%02x\n",
bt_mac[0], bt_mac[1], bt_mac[2], bt_mac[3], bt_mac[4],
bt_mac[5]);
if (BT_STATUS_SUCCESS !=
bt_load_cal_data(priv, cal_data, bt_mac)) {
PRINTM(FATAL, "BT: Fail to load calibrate data\n");
goto done;
}
} else {
if (BT_STATUS_SUCCESS != bt_load_cal_data(priv, cal_data, NULL)) {
PRINTM(FATAL, "BT: Fail to load calibrate data\n");
goto done;
}
}
ret = BT_STATUS_SUCCESS;
done:
LEAVE();
return ret;
}
/**
* @brief BT init mac address from bt_mac parametre when insmod
*
* @param priv a pointer to bt_private structure
* @param bt_mac mac address buf
* @return BT_STATUS_SUCCESS or BT_STATUS_FAILURE
*/
int
bt_init_mac_address(bt_private * priv, char *mac)
{
u8 bt_mac[ETH_ALEN];
int ret = BT_STATUS_FAILURE;
ENTER();
memset(bt_mac, 0, sizeof(bt_mac));
bt_mac2u8(bt_mac, mac);
PRINTM(CMD, "HCI: New BT Address " MACSTR "\n", MAC2STR(bt_mac));
ret = bt_set_mac_address(priv, bt_mac);
if (ret != BT_STATUS_SUCCESS)
PRINTM(FATAL,
"BT: Fail to set mac address from insmod parametre.\n");
LEAVE();
return ret;
}
/**
* @brief BT parse ASCII format data to MAC address
*
* @param priv BT private handle
* @param data Source data
* @param size data length
* @return BT_STATUS_SUCCESS or BT_STATUS_FAILURE
*/
int
bt_process_init_cfg(bt_private * priv, u8 * data, u32 size)
{
u8 *pos;
u8 *intf_s, *intf_e;
u8 s[MAX_LINE_LEN]; /* 1 line data */
u32 line_len;
char dev_name[MAX_PARAM_LEN];
u8 buf[MAX_PARAM_LEN];
u8 bt_addr[MAX_MAC_ADDR_LEN];
u8 bt_mac[ETH_ALEN];
int setting = 0;
u8 type = 0;
u16 value = 0;
u32 offset = 0;
int ret = BT_STATUS_FAILURE;
memset(dev_name, 0, sizeof(dev_name));
memset(bt_addr, 0, sizeof(bt_addr));
memset(bt_mac, 0, sizeof(bt_mac));
while ((line_len = parse_cfg_get_line(data, size, s)) != -1) {
pos = s;
while (*pos == ' ' || *pos == '\t')
pos++;
if (*pos == '#' || (*pos == '\r' && *(pos + 1) == '\n') ||
*pos == '\n' || *pos == '\0')
continue; /* Need n't process this line */
/* Process MAC addr */
if (strncmp(pos, "mac_addr", 8) == 0) {
intf_s = strchr(pos, '=');
if (intf_s != NULL)
intf_e = strchr(intf_s, ':');
else
intf_e = NULL;
if (intf_s != NULL && intf_e != NULL) {
if ((intf_e - intf_s) > MAX_PARAM_LEN) {
PRINTM(ERROR,
"BT: Too long interface name %d\n",
__LINE__);
goto done;
}
strncpy(dev_name, intf_s + 1,
intf_e - intf_s - 1);
dev_name[intf_e - intf_s - 1] = '\0';
if (strcmp
(dev_name,
priv->bt_dev.m_dev[BT_SEQ].name) == 0) {
/* found hci device */
strncpy(bt_addr, intf_e + 1,
MAX_MAC_ADDR_LEN - 1);
bt_addr[MAX_MAC_ADDR_LEN - 1] = '\0';
/* Convert MAC format */
bt_mac2u8(bt_mac, bt_addr);
PRINTM(CMD,
"HCI: %s new BT Address " MACSTR
"\n", dev_name, MAC2STR(bt_mac));
if (BT_STATUS_SUCCESS !=
bt_set_mac_address(priv, bt_mac)) {
PRINTM(FATAL,
"BT: Fail to set mac address\n");
goto done;
}
}
} else {
PRINTM(ERROR,
"BT: Wrong config file format %d\n",
__LINE__);
goto done;
}
}
/* Process REG value */
else if (strncmp(pos, "bt_reg", 6) == 0) {
intf_s = strchr(pos, '=');
if (intf_s != NULL)
intf_e = strchr(intf_s, ',');
else
intf_e = NULL;
if (intf_s != NULL && intf_e != NULL) {
/* Copy type */
memset(buf, 0, sizeof(buf));
strncpy(buf, intf_s + 1, 1);
buf[1] = '\0';
if (0 == bt_atoi(&setting, buf))
type = (u8) setting;
else {
PRINTM(ERROR,
"BT: Fail to parse reg type\n");
goto done;
}
} else {
PRINTM(ERROR,
"BT: Wrong config file format %d\n",
__LINE__);
goto done;
}
intf_s = intf_e + 1;
intf_e = strchr(intf_s, ',');
if (intf_e != NULL) {
if ((intf_e - intf_s) >= MAX_PARAM_LEN) {
PRINTM(ERROR,
"BT: Regsier offset is too long %d\n",
__LINE__);
goto done;
}
/* Copy offset */
memset(buf, 0, sizeof(buf));
strncpy(buf, intf_s, intf_e - intf_s);
buf[intf_e - intf_s] = '\0';
if (0 == bt_atoi(&setting, buf))
offset = (u32) setting;
else {
PRINTM(ERROR,
"BT: Fail to parse reg offset\n");
goto done;
}
} else {
PRINTM(ERROR,
"BT: Wrong config file format %d\n",
__LINE__);
goto done;
}
intf_s = intf_e + 1;
if ((strlen(intf_s) >= MAX_PARAM_LEN)) {
PRINTM(ERROR,
"BT: Regsier value is too long %d\n",
__LINE__);
goto done;
}
/* Copy value */
memset(buf, 0, sizeof(buf));
strncpy(buf, intf_s, sizeof(buf));
if (0 == bt_atoi(&setting, buf))
value = (u16) setting;
else {
PRINTM(ERROR, "BT: Fail to parse reg value\n");
goto done;
}
PRINTM(CMD,
"BT: Write reg type: %d offset: 0x%x value: 0x%x\n",
type, offset, value);
if (BT_STATUS_SUCCESS !=
bt_write_reg(priv, type, offset, value)) {
PRINTM(FATAL,
"BT: Write reg failed. type: %d offset: 0x%x value: 0x%x\n",
type, offset, value);
goto done;
}
}
}
ret = BT_STATUS_SUCCESS;
done:
LEAVE();
return ret;
}
